Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  

HTP6A60H Datasheet with Chat AI
  • AIauthorized

    Hello, Please ask a question about HTP6A60H Datasheet

  • # Example questions: ➢ What is the maximum thermal resistance from junction to case?
    ➢ What is the typical holding current value, as indicated in the electrical characteristics table?
    ➢ What is the peak on-state voltage value when the forward current (it) is 8.5a and the gate current (ig) is 20ma?

  • Part No.HTP6A60H
    ManufacturerSEMIHOW
    Size390 Kbytes
    Pages6 pages
    Description3 Quadrants Standard TRIAC
    Datasheet Summary with AI

    1. Absolute Maximum Ratings

    ️· Repetitive Peak Off-State Voltage (VDRM): Not explicitly stated, but is referenced in several characteristics.
    ️· Operating Junction Temperature (Tj): -40°C to +150°C
    ️· Storage Temperature (Ts): -40°C to +150°C

    2. Electrical Characteristics (Tj = 25°C unless otherwise specified)

    ️· Repetitive Peak Off-State Current:
    - At Tj = 25°C: 50A (typical)
    - At Tj = 125°C: 5A (typical)
    ️· Repetitive Peak Reverse Current:
    - At Tj = 25°C: 50A (typical)
    - At Tj = 125°C: 5A (typical)
    ️· Gate Trigger Current (IGT): ≤ 25A (max). The conditions are: VD = 12V, RL = 330Ω, 1+, 1-, 3- are reference points (likely gate, cathode, anode)
    ️· Gate Trigger Voltage (VGT): ≤ 1.5V (max) under the same conditions as IGT
    ️· Non-Trigger Gate Voltage: ≥ 0.2V (min) at VD = 12V, RL = 330Ω, TJ=125°C
    ️· Peak On-State Voltage (VTM): 1.2V - 1.5V (typical) at IT = 8.5A, IG = 20mA
    ️· Critical Rate of Rise of Off-State Voltage (dV/dt): ≥ 200 V/µs at VD = 2/3 VDRM, Tj=125°C
    ️· Holding Current (IH): ≥ 45A at IT = 0.2A

    3. Thermal Characteristics

    ️· Thermal Resistance (Junction to Case): 3.9°C/W
    ️· Thermal Resistance (Junction to Ambient): 58°C/W

    4. Figures/Graphs

    ️· Fig 7: Holding current vs. Junction temperature.
    ️· Fig 8: Thermal Impedance vs. Pulse Time
    ️· Fig 9: Instantaneous On-State Current vs. Instantaneous On-State Voltage

    5. Mechanical Dimensions

    ️· Two dimension diagrams are provided.
    ️· Dimensions are given in millimeters with tolerances.

    6. Additional Notes

    ️· Pulse Width ≤ 1.0ms, Duty Cycle ≤ 1% for certain measurements.
    ️· Whole parameter and test condition can not be over absolute maximum ratings.

    Key Takeaways:

    ️· This is a high-current thyristor/SCR or similar device.
    ️· It's designed for relatively high-temperature operation (up to 150°C junction temperature).
    ️· The datasheet provides important parameters for designing circuits using this device, including gate trigger requirements, on-state voltage, and thermal characteristics.
    ️· The graphs are essential for understanding the device's behavior under different conditions.

    1. Absolute Maximum Ratings

    ️· Repetitive Peak Off-State Voltage (VDRM): Not explicitly stated, but is referenced in several characteristics.
    ️· Operating Junction Temperature (Tj): -40°C to +150°C
    ️· Storage Temperature (Ts): -40°C to +150°C

    2. Electrical Characteristics (Tj = 25°C unless otherwise specified)

    ️· Repetitive Peak Off-State Current:
    - At Tj = 25°C: 50A (typical)
    - At Tj = 125°C: 5A (typical)
    ️· Repetitive Peak Reverse Current:
    - At Tj = 25°C: 50A (typical)
    - At Tj = 125°C: 5A (typical)
    ️· Gate Trigger Current (IGT): ≤ 25A (max). The conditions are: VD = 12V, RL = 330Ω, 1+, 1-, 3- are reference points (likely gate, cathode, anode)
    ️· Gate Trigger Voltage (VGT): ≤ 1.5V (max) under the same conditions as IGT
    ️· Non-Trigger Gate Voltage: ≥ 0.2V (min) at VD = 12V, RL = 330Ω, TJ=125°C
    ️· Peak On-State Voltage (VTM): 1.2V - 1.5V (typical) at IT = 8.5A, IG = 20mA
    ️· Critical Rate of Rise of Off-State Voltage (dV/dt): ≥ 200 V/µs at VD = 2/3 VDRM, Tj=125°C
    ️· Holding Current (IH): ≥ 45A at IT = 0.2A

    3. Thermal Characteristics

    ️· Thermal Resistance (Junction to Case): 3.9°C/W
    ️· Thermal Resistance (Junction to Ambient): 58°C/W

    4. Figures/Graphs

    ️· Fig 7: Holding current vs. Junction temperature.
    ️· Fig 8: Thermal Impedance vs. Pulse Time
    ️· Fig 9: Instantaneous On-State Current vs. Instantaneous On-State Voltage

    5. Mechanical Dimensions

    ️· Two dimension diagrams are provided.
    ️· Dimensions are given in millimeters with tolerances.

    6. Additional Notes

    ️· Pulse Width ≤ 1.0ms, Duty Cycle ≤ 1% for certain measurements.
    ️· Whole parameter and test condition can not be over absolute maximum ratings.

    Key Takeaways:

    ️· This is a high-current thyristor/SCR or similar device.
    ️· It's designed for relatively high-temperature operation (up to 150°C junction temperature).
    ️· The datasheet provides important parameters for designing circuits using this device, including gate trigger requirements, on-state voltage, and thermal characteristics.
    ️· The graphs are essential for understanding the device's behavior under different conditions.

    Part No.HTP6A60H
    ManufacturerSEMIHOW
    Size390 Kbytes
    Pages6 pages
    Description3 Quadrants Standard TRIAC
    Does ALLDATASHEET help your business so far?  [ DONATE ] 

    About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
    All Rights Reserved©Alldatasheet.com


    Mirror Sites
    English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
    Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
    Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
    Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
    Family Site : ic2ic.com  |   icmetro.com