Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  

  • AD8228ARZ-R71

  • AI
    The **AD8228ARZ-R7** is a high-performance, precision instrumentation amplifier manufactured by Analog Devices. It is specifically designed to provide high accuracy and CMRR (Common-Mode Rejection Ratio) with a fixed gain. --- ## 1. Core Specifications Below are the primary technical characteristics of the AD8228ARZ-R7: | Parameter | Specification | | :--- | :--- | | **Type** | Instrumentation Amplifier | | **Gain Settings** | Fixed: 10 or 100 (Pin-strappable) | | **Supply Voltage Range** | ±2.3 V to ±18 V (Dual) / 4.6 V to 36 V (Single) | | **Input Offset Voltage** | 100 μV (Maximum) | | **Gain Drift** | 5 ppm/°C (Maximum) | | **Bandwidth (-3dB)** | 650 kHz (at G=100) | | **Package** | 8-SOIC (N-Suffix) | | **Packaging Type** | Tape & Reel (indicated by R7) | --- ## 2. Key Electronic Features ### A. Fixed Gain Precision Unlike standard amplifiers that require external resistors to set the gain, the AD8228 uses internal, laser-trimmed resistors. - **Benefits:** This eliminates the gain error and drift typically introduced by external components. - **Selection:** Gain is set by connecting specific pins (shorted for G=100, open for G=10). ### B. High Common-Mode Rejection Ratio (CMRR) The device boasts a minimum CMRR of **100 dB (G=10)**. This allows the part to extract very small differential signals in the presence of large common-mode noise or voltage offsets, which is critical in industrial sensor applications. ### C. Wide Input Range It can handle input voltages that extend to the power supply rails, and it is robust against overvoltage conditions. --- ## 3. Pin Configuration (8-SOIC) | Pin No. | Name | Function | | :---: | :--- | :--- | | 1 | -IN | Inverting Input | | 2 | G1 | Gain setting pin | | 3 | G2 | Gain setting pin | | 4 | +IN | Non-inverting Input | | 5 | -V_S | Negative Power Supply | | 6 | REF | Reference Pin (sets output zero level) | | 7 | V_OUT | Output Signal | | 8 | +V_S | Positive Power Supply | --- ## 4. Typical Applications The AD8228 is commonly used in environments requiring high precision and reliability: - **Medical Instrumentation:** ECG/EKG monitors. - **Industrial Process Control:** Bridge amplifiers for pressure or weight sensors. - **Precision Data Acquisition:** Interfacing sensors with ADCs. - **Aerospace:** High-reliability signal conditioning. --- ## 5. Decoding the Part Number * **AD8228:** Model Number. * **A:** Performance Grade (Standard). * **R:** Package Type (SOIC). * **Z:** RoHS Compliant (Lead-free). * **R7:** 7-inch Tape and Reel (3000 units/reel).
    ✨ Follow-up Questions
    • ⤷How do I switch between the gain of 10 and 100 in a circuit design?
    • ⤷ What is the importance of the REF pin in this amplifier?
    • ⤷ How does the AD8228 compare to the AD8221 in terms of precision?