ATS-01F-124-C2-R0
AI

The **ATS-01F-124-C2-R0** is a high-performance heat sink manufactured by **Advanced Thermal Solutions (ATS)**. It is part of the "blue ICE" series, specifically designed for cooling electronic components such as CPUs, GPUs, and other high-power ICs.
### 1. Key Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | Advanced Thermal Solutions (ATS) |
| **Part Number** | ATS-01F-124-C2-R0 |
| **Material** | Aluminum |
| **Finish** | Blue Anodized |
| **Thermal Resistance** | 3.28°C/W (at 200 LFM) |
| **Dimensions (L x W x H)** | 50.00mm x 50.00mm x 25.00mm |
| **Attachment Method** | pushPIN™ |
| **Fin Style** | Straight Fin |
---
### 2. Physical Design and Construction
The device is engineered for thermal efficiency through specific physical attributes:
* **Material:** It is made from high-grade aluminum, which provides an optimal balance between weight, thermal conductivity, and cost.
* **Fin Geometry:** It features a **Straight Fin** pattern. This is ideal for applications where airflow is consistent and directed in a single axis.
* **Anodization:** The blue anodized finish is not just aesthetic; it provides surface protection against corrosion and increases thermal emissivity.
---
### 3. Mounting Mechanism (pushPIN™)
The "R0" suffix often indicates the inclusion of the **pushPIN™** attachment system. This system includes:
1. **Springs:** Pre-assembled compression springs that ensure precise pressure is applied to the component for maximum heat transfer.
2. **Pins:** Plastic or brass pins that lock into pre-drilled holes on the PCB.
3. **Thermal Interface Material (TIM):** Most of these parts come with a pre-applied high-performance thermal pad or grease (Phase Change Material) to bridge the air gap between the component and the heat sink.
---
### 4. Thermal Performance Context
Thermal resistance is the critical metric for this part. The lower the resistance (°C/W), the better the cooling:
* **Unducted Flow:** At low air speeds (200 LFM), it performs at approximately **3.28°C/W**.
* **High Velocity:** In high-speed airflow environments (700 LFM), the resistance can drop as low as **1.20°C/W**.
---
- ⤷
What are the PCB hole requirements for the pushPIN mounting system?
- ⤷ How does this heat sink compare to cross-cut fin designs in terms of airflow?
- ⤷ Can the pre-applied thermal interface material be replaced with liquid metal?