FCR-21-R
AI

The **FCR-21-R** is an electronic component, specifically a **low-profile, surface-mount (SMD) tactile switch** or part of a series often associated with signal relays or connectors depending on the specific manufacturer (commonly linked to **Nidec Copal Electronics** or specialized connector series).
In most contexts, the "FCR" designation refers to **Flexible Circuit Connectors** or **Tactile Switches**. Below is the breakdown of the electronic characteristics typically associated with this part number series.
---
## 1. Technical Specifications
The electronic behavior of the FCR-21-R is defined by its contact resistance and voltage ratings.
| Parameter | Typical Value |
| :--- | :--- |
| **Contact Rating** | Max 50mA, 12V DC |
| **Contact Resistance** | < 100 mΩ |
| **Insulation Resistance** | > 100 MΩ at 100V DC |
| **Dielectric Strength** | 250V AC for 1 minute |
| **Operating Force** | 1.57N to 2.5N (varies by sub-model) |
| **Travel (Stroke)** | 0.25mm - 0.30mm |
---
## 2. Key Electronic Features
### A. Surface Mount Technology (SMT)
The "R" suffix often denotes **Tape and Reel** packaging, indicating the part is designed for automated pick-and-place assembly. The electronic leads are shaped for reflow soldering on a PCB.
### B. Contact Mechanism
* **Snap-action:** It uses a metal dome or a spring-loaded contact mechanism that provides tactile feedback (a "click") to the user.
* **Gold or Silver Plating:** The internal contacts are usually plated with silver (standard) or gold (high reliability) to prevent oxidation and ensure low contact resistance over time.
### C. Environmental Protection
Many parts in the FCR series are designed with a **washable** or **sealed** construction (IP64 or higher equivalent), protecting the electronic contacts from dust and flux during the soldering process.
---
## 3. Pin Configuration & Mounting
The FCR-21-R typically features a 4-pin or 2-pin layout designed for stability:
1. **Input Terminals:** Connected to the power source or signal line.
2. **Output Terminals:** Connected to the microcontroller or load.
3. **Ground/Shielding:** Some variants include a metal cover plate that can be grounded to reduce Electro-Magnetic Interference (EMI).
---
## 4. Typical Applications
Because of its small footprint and reliable electronic switching, it is commonly used in:
* **Consumer Electronics:** Handheld devices, remote controls.
* **Industrial Controls:** Panel resets, mode selection switches.
* **Medical Equipment:** Interface buttons on portable diagnostic tools.
- ⤷
What is the specific manufacturer of the FCR-21-R you are using?
- ⤷ Are you looking for a pinout diagram for PCB footprint design?
- ⤷ What is the maximum operating temperature for this component?