Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  

  • M24LR16E-R

  • AI
    ## Overview of the M24LR16E-R The **M24LR16E-R** is a unique electronic component developed by STMicroelectronics. It is categorized as a **Dynamic NFC/RFID tag IC**. What makes it special is its **dual-interface** capability: it can be accessed via a wired connection (I2C) and a wireless connection (ISO 15693 RFID/NFC). --- ### 1. Key Technical Specifications | Feature | Specification | | :--- | :--- | | **Memory Size** | 16 Kbit (2048 bytes) EEPROM | | **Wired Interface** | I2C (Up to 400 kHz) | | **Wireless Interface** | ISO 15693 / NFC Forum Type 5 (13.56 MHz) | | **Supply Voltage (Vcc)** | 1.8V to 5.5V | | **Energy Harvesting** | Analog output providing power to external circuits | | **Data Retention** | 40 years | | **Write Cycles** | 1,000,000 cycles | --- ### 2. Functional Electronic Blocks The M24LR16E-R consists of several internal subsystems that allow it to bridge the gap between a microcontroller and a smartphone/RFID reader: #### A. Dual-Interface EEPROM The core of the chip is the non-volatile memory. Both the **I2C bus** (connected to a local MCU) and the **RF antenna** (communicating with an NFC reader) can read and write to the same memory locations. #### B. The RF Interface (ISO 15693) This section handles the 13.56 MHz signal from an external antenna. It includes: * **Rectifier/Regulator:** Converts the incoming RF field into DC voltage to power the chip. * **Demodulator:** Extracts data sent by the NFC reader. #### C. Energy Harvesting (Vout pin) This is a standout feature. When the chip is in a strong enough induction field (from an NFC phone or reader), it can export excess energy through a dedicated **Vout** pin to power low-power components like a low-power MCU or an LED. #### D. The I2C Interface Allows a standard microcontroller to interact with the memory. This interface works even when the RF field is absent, provided the chip has a Vcc supply. --- ### 3. Pin Configuration (Typical SO8/TSSOP8) | Pin | Name | Description | | :--- | :--- | :--- | | 1 | **Vout** | Energy Harvesting output voltage | | 2 | **AC0** | Antenna connection 0 | | 3 | **AC1** | Antenna connection 1 | | 4 | **Vss** | Ground | | 5 | **SDA** | I2C Serial Data | | 6 | **SCL** | I2C Serial Clock | | 7 | **WIP/BUSY** | Write in progress or RF Busy output | | 8 | **Vcc** | External power supply (1.8V - 5.5V) | --- ### 4. Typical Application Circuit To use this part, you generally need a PCB-trace antenna connected to pins AC0 and AC1. ```c // Example logic for an MCU to check if RF is busy via I2C // Address for M24LR16E is typically 0x53 (7-bit) void checkRFBusy() { uint8_t status = readRegister(0x00); // Read internal control register if (status & 0x01) { printf("RF Interface is currently accessing memory."); } } ``` --- ### 5. Common Use Cases * **Zero-power Configuration:** Changing device settings via NFC while the device is still in the box (unpowered). * **Data Logging:** An MCU writes sensor data to the EEPROM via I2C, and a user retrieves it later using a smartphone. * **Battery-less Sensors:** Using the Energy Harvesting pin to power a small sensor only when an NFC phone is nearby.
    ✨ Follow-up Questions
    • ⤷ How do I calculate the required antenna inductance for the M24LR16E-R?
    • ⤷ What is the maximum current output of the Energy Harvesting (Vout) pin?
    • ⤷ How does the password protection mechanism work for the RF and I2C interfaces?