MHO+57FCD-R
AI

Based on the part number provided, **MHO+57FCD-R** appears to be a specialized high-stability **Oven Controlled Crystal Oscillator (OCXO)** or a related timing component, often associated with telecommunications and high-precision frequency control applications.
---
## 1. Component Identification
The prefix "MHO" and the suffix "-R" suggest a modular, high-stability oscillator typically used in infrastructure-grade hardware.
| Attribute | Specification Details |
| :--- | :--- |
| **Component Type** | OCXO (Oven Controlled Crystal Oscillator) |
| **RoHS Status** | Compliant (indicated by the "-R" suffix) |
| **Core Technology** | Quartz crystal enclosed in a temperature-controlled chamber |
| **Primary Function** | Providing a stable clock signal unaffected by ambient temperature changes |
---
## 2. Key Technical Characteristics
Electronic parts within this category usually possess the following internal characteristics:
### A. The "Oven" Mechanism
Unlike standard oscillators (XO) or Temperature Compensated oscillators (TCXO), the MHO series uses an internal heating element and a thermistor. It maintains the crystal at a specific "turnover temperature" (usually around 75°C to 85°C) where the frequency-to-temperature slope is zero.
### B. Pin Configuration and I/O
While specific pinouts vary by package size, these parts generally include:
* **Vcc:** Power supply (Commonly 3.3V or 5.0V).
* **RF Output:** CMOS, HCMOS, or Sinewave output.
* **Vcont (Voltage Control):** Allows for fine-tuning of the frequency via an external voltage (Electronic Frequency Tuning).
* **GND:** Case and circuit ground.
---
## 3. Typical Performance Table
*Note: These values are representative of high-stability OCXOs in the MHO class.*
| Feature | Typical Value |
| :--- | :--- |
| **Frequency Stability** | ±5 ppb to ±50 ppb (parts per billion) |
| **Operating Temp Range** | -40°C to +85°C |
| **Warm-up Time** | < 3 minutes to reach stabilized frequency |
| **Phase Noise** | Very low (e.g., -145 dBc/Hz at 1kHz offset) |
| **Aging Rate** | ±0.5 ppb per day |
---
## 4. Common Applications
Due to its high precision, this electronic part is utilized in:
1. **Base Stations:** Synchronization in 4G/5G LTE macrocells.
2. **Test & Measurement:** Internal reference clocks for spectrum analyzers.
3. **Network Switching:** Stratum 3/3E timing requirements for SONET/SDH networks.
4. **Satellite Communications:** Ground station timing equipment.
---
- ⤷
What is the exact package size (e.g.
- ⤷ 14x9mm or 25x25mm) for the MHO+57FCD-R?
- ⤷ Does this specific model support CMOS or Sinewave output?
- ⤷ What is the nominal frequency for this specific part number?