W2AC-AZ4B-R2/Q
AI

Based on the part number **W2AC-AZ4B-R2/Q**, this component belongs to the **industrial networking and interface** category, specifically manufactured by **Westermo**. This model is part of the **Wolverine** series, designed for Ethernet extension over legacy copper cabling.
---
### 1. Component Specification Overview
The W2AC-AZ4B-R2/Q is an industrial-grade **Ethernet Extender**. It allows high-speed data transmission over long distances using standard twisted-pair copper wires.
| Feature | Specification |
| :--- | :--- |
| **Series** | Wolverine (DDW-120/22x equivalent family) |
| **Primary Function** | Ethernet to SHDSL Bridge |
| **Transmission Media** | Twisted pair copper (telecom grade) |
| **Data Rate** | Up to 15.3 Mbit/s per pair |
| **Isolation** | High-grade galvanic isolation (Industrial) |
| **Mounting** | DIN-rail mounting |
---
### 2. Key Electronic Features
* **SHDSL Technology:** It utilizes Single-pair High-speed Digital Subscriber Line technology, enabling existing phone lines to be reused for modern Ethernet networks.
* **Ruggedized Design:** Built with high MTBF (Mean Time Between Failures) components to withstand harsh electromagnetic interference (EMI) and extreme temperatures (-40 to +70°C).
* **Diagnostic Port:** Often features a console port (RS-232) for configuration and signal quality monitoring.
* **Redundancy:** Supports ring topologies to ensure network uptime if one cable is severed.
---
### 3. Connection Interface
The device typically features the following physical ports:
1. **Ethernet Ports:** 10/100Base-TX ports (usually RJ-45) for local LAN connection.
2. **DSL Interface:** Terminal block or RJ-11 for the long-distance copper link.
3. **Power Input:** Redundant DC power inputs (typically 12–48V DC).
---
### 4. Application Context
This part is commonly used in:
* **Railways:** Signalling systems using old trackside copper cables.
* **Utilities:** Power substations where fiber is too expensive to deploy.
* **Water Treatment:** Connecting remote pump stations across large distances.
- ⤷
What is the maximum distance supported by the W2AC series over copper wire?
- ⤷ Does this model support Layer 2 or Layer 3 switching features?
- ⤷ What are the specific power supply requirements for the R2/Q variant?