Benefits and Features
Compatible with most Campbell Scientific data loggers
Can be used with a phone modem, Ethernet link, or spread spectrum radio to extend the distance between the data logger and PC
Increasethse distance allowed between a CCSMPX digital camera and a PakBus data logger
Extends the distance between AVW200 Vibrating-Wire Interfaces for situations where wireless communication is impractical
Internal buffering ensures that data is not lost during transmission and allows each side to operate at different baud rates
Includes gas tubes on the RS-485 ports and a ground lug for better surge protection
Communicates at rates up to 115.2 kbps

Technical Description
The MD485 includes three ports (RS-232, CS I/0, RS-485) for connecting a PC, a data logger, or another MD485. Any two ports can be used at a time.
The MD485 can be configured to provide transparent communications, MD9 emulation, and PakBus networking. Although the MD485 can emulate an MD9, the MD485 can not be added to an existing MD9 network. PakBus networking requiretshe data loggers to use the PakBus communications protocol. PC400 or LoggerNet software is used to initiate and control the communications link.