 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
-3G-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | AML25GBF2AA03GR | Honeywell Sensing and Control | Switch Rocker ON None (ON) SPDT Quick Connect/Solder Paddle RoHS : Compliant |
| 19 | |
| 7053-GREEN-100 | Alpha Wire | Hook-up Wire - Stranded - 26 (7/34) AWG - PVC Green - 100 ft - Tinned Copper RoHS : Compliant |
| 5 | ||
| 788133-GR005 | Alpha Wire | Green - 30.48m (100ft)/Spool RoHS : Compliant |
| 2 | ||
| 49643-GRY-S2 | Belden Inc | RoHS : Compliant |
| 2 | ||
| 7133-GREEN-100 | Alpha Wire | Hook-up Wire 18AWG 2.08mm Tinned Copper- Green - 300V - 30.48m (100ft)/Spool RoHS : Compliant |
| 1 | ||
| 10GXW53-GRAY-1000 | Belden Inc | 10GXW Category 6A Enhanced Premise Horizontal Cable (500MHz) 4 Pair 23 AWG Solid Bare Copper Conductors F/UTP - Foil Shielded Plenum-CMP Flamarrest® PVC-LS Jacket - 1000 ft RoHS : Compliant |
| 0 | ||
| PAFH13/GR/50M | Thomas & Betts | AF PAFH13/GR/50M PA6 HEAVY RoHS : Compliant |
| 0 | ||
| AML26GBF2DA03GR | Honeywell Sensing and Control | Switch Rocker ON None (ON) DPDT Quick Connect/Solder Rocker RoHS : Compliant |
| 0 | ||
| 5243GR-DW6 | Thomas & Betts | Liquidtight Fitting - 3/4 Inch Malleable Iron - Non-insulated 45 Degree - Revolver Grounding With Stainless Steel 316 Set Screw. RoHS : Compliant |
| 0 | ||
| IDSD-17-D-02.83-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-20-D-11.93-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSS-08-D-27.33-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| GMSTBO25HV3GR725THR | Phoenix Contact | PCB headers - number of positions: 3 - pitch: 7.25 mm - pin layout: Linear pinning RoHS : Compliant |
| 0 | ||
| HLT-0603-G-R | Samtec Inc | .100 Screw Machine Terminal Array RoHS : Compliant |
| 0 | ||
| 5353GR | Thomas & Betts | External Bonding Liquidtight Insulated Connector Flexible Metal Conduit Fitting - 3/4 Inch - 90 Degree Angle - With Revolver Lug - With Tin to plated Copper Alloy Lug for Awg #14 to #2 Ground Wire - for Use In Wet Locations - 10 Pieces. RoHS : Compliant |
| 0 | ||
 Avnet Americas | QRE1113GR | onsemi | - Tape and Reel (Alt: QRE1113GR) RoHS : Compliant |
| 109,000 | |
TLP183(GR-TPL,E | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP183(GR-TPL,E) RoHS : Compliant | 3,000 | |||
TLP383(GR-TPL,E | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP383(GR-TPL,E) RoHS : Compliant |
| 3,000 | ||
TLP293(GR-TPL,E | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP293(GR-TPL,E) RoHS : Compliant |
| 2,500 | ||
| RLR07C1803GRRE6 | Vishay Intertechnologies | Through Hole Resistor, 180 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C1803GRRE6) RoHS : Not Compliant |
| 1,000 | ||
| RLR05C2203GRRE6 | Vishay Intertechnologies | Through Hole Resistor, 220 kohm, RLR Series, 125 mW, ? 2%, Axial Leaded, 200 V, Metal Film - Tape and Reel (Alt: RLR05C2203GRRE6) RoHS : Not Compliant |
| 1,000 | ||
| RL20S473GRE5 | Vishay Intertechnologies | - Tape and Reel (Alt: RL20S473GRE5) RoHS : Not Compliant |
| 500 | ||
| RLR20C3303GRB14 | Vishay Intertechnologies | ERL-20 330K 2% T-1 RLR20C3303GR B14 - Bulk (Alt: RLR20C3303GRB14) RoHS : Not Compliant |
| 500 | ||
| RLR07C4703GRB14 | Vishay Intertechnologies | Through Hole Resistor, 470 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C4703GRB14) RoHS : Not Compliant |
| 400 | ||
| RLR07C1003GRB14 | Vishay Intertechnologies | Through Hole Resistor, 100 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C1003GRB14) RoHS : Not Compliant |
| 200 | ||
| RLR07C2003GRB14 | Vishay Intertechnologies | Through Hole Resistor, 200 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C2003GRB14) RoHS : Not Compliant |
| 200 | ||
| RLR05C3003GRB14 | Vishay Intertechnologies | Through Hole Resistor, 300 kohm, RLR Series, 125 mW, ? 2%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RLR05C3003GRB14) RoHS : Not Compliant |
| 100 | ||
| RLR07C1203GRB14 | Vishay Intertechnologies | Through Hole Resistor, 120 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C1203GRB14) RoHS : Not Compliant |
| 99 | ||
| AT13-6P-BM03GRY | Amphenol Corporation | Automotive Connector, AT BoardLock Series, Right Angle Receptacle, 6 Contacts, PCB Pin - Trays (Alt: AT13-6P-BM03GRY) RoHS : Compliant |
| 87 | ||
| BP91273-506-3 GRP C DATA | KEMET Corporation | - Bulk (Alt: T513X107K020BH4213 GRP C DATA) RoHS : Not Compliant | 2 | |||
 Mouser Electronics | TB0014-500-03GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 3 pole, 5.0mm pitch, Slotted Screw RoHS : Compliant |
| 1,870 | |
| TB0014-508-03GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 3 pole, 5.08 pitch, Slotted Screw RoHS : Compliant |
| 1,751 | ||
| TB0013-500-P03GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 3 pole, 5.0mm pitch, Phillips Screw RoHS : Compliant |
| 1,697 | ||
| TB0015-500-03GR | Same Sky | Fixed Terminal Blocks 3 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Terminal Block Connector RoHS : Compliant |
| 1,388 | ||
| RLR05C2203GRB14 | Vishay Intertechnologies | Metal Film Resistors - Through Hole 220K OHM 2% ERL-05 |
| 1,100 | ||
| TB0015-500-2-03GR | Same Sky | Fixed Terminal Blocks 3 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Double Deck, Terminal Block Connector RoHS : Compliant |
| 960 | ||
| TB0015-500-3-03GR | Same Sky | Fixed Terminal Blocks 3 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Tripple Deck, Terminal Block Connector RoHS : Compliant |
| 540 | ||
| RLR32C1003GRB14 | Vishay Intertechnologies | Metal Film Resistors - Through Hole 100K OHM 2% ERL-32 |
| 500 | ||
| RLR05C1003GRB14 | Vishay Intertechnologies | Metal Film Resistors - Through Hole 100K OHM 2% ERL-05 |
| 199 | ||
| 3GR32 | Altech Corporation | Circuit Breakers 32A RITONMCB CCHAR 277VAC UL508 RoHS : Compliant |
| 0 | ||
| 3GR10 | Altech Corporation | Circuit Breakers 10A MCB GCHAR 277VAC UL508 RoHS : Compliant |
| 0 | ||
| 3GR5 | Altech Corporation | Circuit Breakers 5A RITON MCB GCHAR 277VAC UL508 RoHS : Compliant |
| 0 | ||
| 3GR4 | Altech Corporation | Circuit Breakers 4A RITON MCB GCHAR 277VAC UL508 RoHS : Compliant |
| 0 | ||
| 3GR40 | Altech Corporation | Circuit Breakers 40A MCB GCHAR 277VAC UL508 RoHS : Compliant |
| 0 | ||
| 3GR63 | Altech Corporation | Circuit Breakers 63A MCB G CHAR 3 pl 480Y RoHS : Compliant |
| 0 | ||
 Newark | CC0603GRNPO0BN221 | YAGEO Corporation | Capacitor, 220Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO0BN221 RoHS : Compliant |
| 8,510 | |
| CC0603GRNPO0BN221 | YAGEO Corporation | Capacitor, 220Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO0BN221 RoHS : Compliant |
| 8,510 | ||
CC0603GRNPO9BN221 | YAGEO Corporation | Cap, 220Pf, 50V, Mlcc, 0603; |Yageo CC0603GRNPO9BN221 RoHS : Compliant |
| 8,000 | ||
| CC0603GRNPO9BN221 | YAGEO Corporation | Cap, 220Pf, 50V, Mlcc, 0603; |Yageo CC0603GRNPO9BN221 RoHS : Compliant |
| 4,970 | ||
| CC0603GRNPO9BN221 | YAGEO Corporation | Cap, 220Pf, 50V, Mlcc, 0603; |Yageo CC0603GRNPO9BN221 RoHS : Compliant |
| 4,970 | ||
| CC0603GRNPO9BN391 | YAGEO Corporation | Capacitor, 390Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO9BN391 RoHS : Compliant |
| 4,710 | ||
| CC0603GRNPO9BN391 | YAGEO Corporation | Capacitor, 390Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO9BN391 RoHS : Compliant |
| 4,710 | ||
| CC0603GRNPO0BN121 | YAGEO Corporation | Capacitor, 120Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO0BN121 RoHS : Compliant |
| 3,350 | ||
| CC0603GRNPO0BN121 | YAGEO Corporation | Capacitor, 120Pf, C0G/Np0, 0603; |Yageo CC0603GRNPO0BN121 RoHS : Compliant |
| 3,350 | ||
| CC0603GRNPO9BN121 | YAGEO Corporation | Cap, 120Pf, 50V, Mlcc, 0603; |Yageo CC0603GRNPO9BN121 RoHS : Compliant |
| 1,210 | ||
| CC0603GRNPO9BN121 | YAGEO Corporation | Cap, 120Pf, 50V, Mlcc, 0603; |Yageo CC0603GRNPO9BN121 RoHS : Compliant |
| 1,210 | ||
| TRD695SRA3GRY-2 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA3GRY-2 RoHS : Compliant |
| 124 | ||
| FMCA2673/GR-300 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2673/GR-300 RoHS : Not Compliant |
| 10 | ||
| TRD815RA3GRY-1 | L-com Inc | Cord, Rj45 R/A Plug-R/A Plug, 304.8Mm; |L-Com TRD815RA3GRY-1 RoHS : Compliant |
| 9 | ||
| 6713 GR005 | Alpha Wire | Wire, Eco, 22Awg, Green, 30.5M; |Alpha Wire 6713 GR005 RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | ADR293GRZ-REEL7 | Analog Devices Inc | LOW NOISE, MICROPWR PRECISION RoHS : Compliant |
| 114,225 | |
| ADR293GRZ | Analog Devices Inc | LOW NOISE, MICROPWR PRECISION RoHS : Compliant |
| 38,240 | ||
 RS | IM23GR (2-1462039-9) | TE Connectivity | DPDT PCB MOUNT RELAY SURFACE MOUNT 2 A 5V DC |
| 985 | |
| 42513 (QT 13 GREY) | icotek Corporation | CABLE GROMMETS FOR QUICK SYSTEMS, QT13, GRAY |
| 827 | ||
| 43794 (KEL-DPZ-B-13 GREY) | icotek Corporation | MULTI-MEMBRANE CABLE ENTRY PLATES, KEL-DPZ-B-13 GRAY |
| 18 | ||
| 900-SUN-5/03-GR | WECO Electrical Connectors | CONNECTOR TAB TAB CONNECTION SUN 5 MM 3 0.051 IN. |
| 16 | ||
| 363 GREEN CX/500 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 18 AWG, 16X30, TC, PVC INS, GREEN, UL1015, UL1032, MTW, BC-5W2,TEW |
| 16 | ||
| 43736 (KEL-DPZ 25/3 GREY) | icotek Corporation | MULTI-MEMBRANE CABLE ENTRY PLATES, ROUND, KEL-DPZ 25/3 GREY |
| 16 | ||
| 42552 (QT-DT 3 GREY) | icotek Corporation | MULTI-RANGE CABLE GROMMETS FOR QUICK SYSTEMS, QT-DT3 GRAY |
| 14 | ||
| 5333GR | T&B Liquidtight Fittings | LIQUIDTIGHT FITTING, EXTERNAL BONDING CONNECTOR, INSULATED, .75" W/LUG, STEEL |
| 9 | ||
| P-7100-103G-R1 | NIDEC Components | PRES SENSOR 01.0 MPA, GAUGE POSITV CORROSIVE GASES/LQDS, M5 FEMALE, WIRE LEADS |
| 5 | ||
| F032093 (GRD-9500-6.0) | GEFRAN spa | RUPTURE DISK |
| 5 | ||
| VX3120-02N-3GR1 | SMC Corporation of America | VX3 VALVE FOR MEDIA, FOR AIR & WATER, NC, BODY PORT,1/4 NPT,110 VAC, GROMMET, IP65 |
| 3 | ||
| 363 GREEN CX/100 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 18 AWG, 16X30, TC, PVC INS, GREEN, UL1015, UL1032, MTW, BC-5W2,TEW |
| 1 | ||
| 1853 GR001 (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 26 AWG, 7X34, GREEN PVC INSULATED, -55 TO +105C, 600V |
| 1 | ||
| 363 GRN/YEL CX/100 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 18 AWG, 16X30, TC, PVC INS, GRN/YL, UL1015, UL1032, MTW, BC-5W2,TEW |
| 1 | ||
| 7053 GR001(MIL-SPEC) (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 26 AWG, 7X34, GREEN PVC INSULATED, -55 TO +80C, 150V |
| 1 | ||
 Bisco Industries | AK672M/2-3-GR | ASSMANN WSW components GmbH | RoHS : Compliant | 300 | ||
| 6713 GR005 | Alpha Wire | 200 | ||||
| RLR20C3003GR | MISC. RESISTORS | 80 | ||||
| MIL-C 16173 GR.2 CL.2 | Military Specifications | 1 | ||||
 Rochester Electronics | QRE1113GR | onsemi | Analog Output Reflective Sensor Reflective Phototransistor 1mm 4-SMD T/R RoHS : Compliant |
| 188,099 | |
ADR293GRUZ-REEL7 | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Compliant |
| 3,625 | ||
| ADR293GRUZ-REEL | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Compliant |
| 2,198 | ||
| ADR293GRU | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Not Compliant |
| 4,527 | ||
| ADR293GRU-REEL7 | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Not Compliant |
| 3,077 | ||
| ADR293GR-REEL | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Not Compliant |
| 2,500 | ||
SN74LVTH16373GRDR | Texas Instruments | Latch 8 Bits D-Type Transparent Latch 3.3V 54-BGA Tray RoHS : Not Compliant |
| 33,698 | ||
| 74ALVCH16373GRDR | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, PBGA54 RoHS : Not Compliant |
| 5,707 | ||
| QEB363GR | Fairchild Semiconductor Corporation | LED Emitter Infrared (IR) 940nm 50mA 2-SMD T/R RoHS : Compliant |
| 804 | ||
| TW8827-TA3-GR | Renesas Electronics Corporation | highly integrated LCD controller for analog LCD panels RoHS : Compliant |
| 238 | ||
| TW9912AT-NA3-GRR5692 | Renesas Electronics Corporation | TW9912 - Low Power NTSC/PAL Video Decoder with Differential CVBS Inputs and MIPI-CSI2 Output Interface RoHS : Compliant |
| 7,800 | ||
| UPA1803GR-9JG-E1-A | Renesas Electronics Corporation | MOSFET N-Channel 30V 8A 8-SOP T/R RoHS : Compliant |
| 12,000 | ||
| UPA1873GR-9JG-E1-A | Renesas Electronics Corporation | MOSFET 2 N-Channel 20V 6A 8-SOP T/R RoHS : Compliant |
| 12,000 | ||
| UPA2793GR(0)-E1-AZ | Renesas Electronics Corporation | MOSFET N and P-Channel 40V 7A (Ta) 8-SOIC T/R RoHS : Compliant |
| 74,100 | ||
| GR DASPA2.23-GRHP-24-1-100-R18-XX | ams OSRAM Group | OSCONIQ P 226 RoHS : Compliant |
| 1,200 | ||
 Sager | 2002G3-GRYKIT | Anderson Power Products | Heavy Duty Power Connectors SAF-D-GRID STD.RCPT 1.0MM PANEL KIT GRY |
| 0 | |
| PAFH13/GR/50M | ABB Group | Spiral Wraps, Sleeves, Tubing & Conduit | 0 | |||
| AML26GBF2DA03GR | Honeywell Sensing and Control / MICRO SWITCH | Rocker Switches UNSEALED OI |
| 0 | ||
| AML25GBF2AA03GR | Honeywell Sensing and Control / MICRO SWITCH | Rocker Switches Unsld OI/ADVMAN LINE |
| 0 | ||
| AB203GR | ABB Group | Thomas & Betts | 0 | |||
| 5243GR-DW6 | ABB Group | 3/4 GRND LT 45 DEG W/SS SCREW | 0 | |||
| UTP28X13GR | Panduit Corp | Ethernet Cables / Networking Cables Cat 6A 28AWG UTP Patch Cord, CM/LSZH, Gr RoHS : Compliant |
| 0 | ||
| UTP6A3GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Green UTP Cab RoHS : Compliant | 0 | |||
| UTP6ASD33GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Green UT RoHS : Compliant | 0 | |||
| NK6APC3GR-Q | Panduit Corp | Ethernet Cables / Networking Cables Netkey copper patch cord, category 6A, C | 0 | |||
| HLT-0603-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 2002G3-GRY | Anderson Power Products | Heavy Duty Power Connectors SAF-D-GRID STD.RECPT GRAY 1.0MM PANEL |
| 0 | ||
| 2002G3-GRY-BK | Anderson Power Products | Heavy Duty Power Connectors STD RCPT GRAY 1.0MM PANEL BULK |
| 0 | ||
| 5353GR | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| MS25089-3GRL | OTTO Engineering Inc | PRECISION SNAP-ACTION PUSHBUTTON SWITCH |
| 0 | ||
 TME | CC0603GRNPO9BN221 | YAGEO Corporation | Capacitor: ceramic; 220pF; 50VDC; C0G (NP0); ±2%; SMD; 0603; 10000MΩ RoHS : Compliant |
| 200,000 | |
| CC0603GRNPO0BN221 | YAGEO Corporation | Capacitor: ceramic; 220pF; 100VDC; C0G (NP0); ±2%; SMD; 0603 RoHS : Compliant |
| 28,000 | ||
| CC0603GRNPO9BN152 | YAGEO Corporation | Capacitor: ceramic; 1.5nF; 50VDC; C0G (NP0); ±2%; SMD; 0603 RoHS : Compliant |
| 16,000 | ||
| CC0603GRNPO0BN121 | YAGEO Corporation | Capacitor: ceramic; MLCC; 120pF; 100V; C0G (NP0); ±2%; SMD; 0603 RoHS : Compliant |
| 3,990 | ||
| CC0603GRNPO9BN391 | YAGEO Corporation | Capacitor: ceramic; MLCC; 390pF; 50V; C0G (NP0); ±2%; SMD; 0603 RoHS : Compliant |
| 2,956 | ||
| EP-SG-M63-GR-A | TE Connectivity | Without nut; M63; 1.5; IP68; polyamide; grey; Entrelec |
| 97 | ||
| 6713 GR005 | Alpha Wire | Wire; EcoWire®; EcoGen®,HookUp Wire; stranded; Cu; 22AWG; MPPE |
| 4 | ||
| PBVJ-10FWE-F3GR1 | Prolight Opto Technology Corp | Power LED; white cold; 10W; 5380-6760K; 1060÷1170lm; 120°; 1000mA |
| 0 | ||
| BY133G_R2_00001 | PanJit Semiconductor | Diode: rectifying; THT |
| 0 | ||
| CC0603GRNPO9BN121 | YAGEO Corporation | Capacitor: ceramic; MLCC; 120pF; 50VDC; NP0; ±2%; SMD; 0603 RoHS : Compliant |
| 0 | ||
| 6823 GR005 | Alpha Wire | Wire; EcoWire® Plus; EcoGen®,HookUp Wire; stranded; Cu; 22AWG |
| 0 | ||
| ACAR XP ULTRA 3 GREY | Hsk Data | Plug socket strip: protective; Sockets: 5; 230VAC; 10A; grey |
| 0 | ||
| GIJ13 GRAY | TE Connectivity | Enclosure: multipurpose; X: 150mm; Y: 400mm; Z: 81mm; steel; grey |
| 0 | ||
| EP-DOP-SZ13-GR-A | TE Connectivity | Stopper; polyamide; grey; Entrelec; Ø: 7mm; Size: 13; L: 15mm |
| 0 | ||
| CPC1393GR | IXYS Corporation | Relay: solid state; SPST-NO; Icntrl max: 50mA; 90mA; max.600VAC RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | QRE1113GR | onsemi | QRE1113 Series 30 V 50 mA Miniature Reflective Object Sensor - SMD-4 RoHS : Compliant | 17,000 | ||
SN74ALVCH162373GR | Texas Instruments | RoHS : Compliant | 4,000 | |||
| TLP383(GR-TPL,E(T | Toshiba America Electronic Components | 1,834 | ||||
 ComSIT USA | CC0603GRNPO9BN270 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000027uF, Surface Mount, 0603 RoHS : Compliant | 44,000 | ||
| ES3GR6 | TSC Electronics Ltd | SURFACE MOUNT SUPER FAST RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 400V V(RRM), Silicon, DO-214AB RoHS : Compliant | 36,000 | |||
| CC0603GRNPO9BN820 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000082uF, Surface Mount, 0603 RoHS : Compliant | 24,000 | |||
| CC0603GRNPO9BN120 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000012uF, Surface Mount, 0603 RoHS : Compliant | 12,000 | |||
| CC0603GRNPO9BN180 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000018uF, Surface Mount, 0603 RoHS : Compliant | 12,000 | |||
| CC0603GRNPO8BN821 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 25V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.00082uF, Surface Mount, 0603 RoHS : Compliant | 8,000 | |||
| CC0603GRNPO9BN181 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.00018uF, Surface Mount, 0603 RoHS : Compliant | 8,000 | |||
| CC0603GRNPO9BN470 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000047uF, Surface Mount, 0603 RoHS : Compliant | 8,000 | |||
| CC0603GRNPO9BN100 | YAGEO Corporation | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.00001uF, Surface Mount, 0603 RoHS : Compliant | 4,000 | |||
| HS3GR6 | Sanken Electric Co Ltd | 3.0 AMPS HIGH EFFICIENT SURFACE MOUNT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 400V V(RRM), Silicon, DO-214AB RoHS : Compliant | 3,000 | |||
| CPC1303GRTR | IXYS Corporation | OPTOCOUPLER WITH SINGLE-TRANSISTOR OUTPUT Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 1,000 | |||
| DBS103GRD | taiwan semiconductor | Bridge Rectifier Diode, 1 Phase, 1A, 200V V(RRM), Silicon RoHS : Compliant | 851 | |||
| TLP293GRLTPLE | Toshiba America Electronic Components | PHOTOCOUPLER INGAAS INFRARED LED AND PHOTO TRANSISTOR Transistor Output Optocoupler RoHS : Compliant | 785 | |||
| K4M561633GRN75 | Samsung Electronics Co. Ltd | 4M X 16BIT X 4 BANKS MOBILE SDRAM Synchronous DRAM, 16MX16, 5.4ns, CMOS, PBGA54 RoHS : Not Compliant | 565 | |||
| CPC1393GR | IXYS Corporation | Transistor Output SSR, 1-Channel, 5000V Isolation RoHS : Compliant | 59 | |||
 Interstate Connecting Components | 799-013GR | Glenair Inc | MICRO CRIMP (79) | 0 | ||
| 10127721-143GRLF | Amphenol FCi | 10127721-143GRLF-MTK 3.0 14P D | 0 | |||
| 10127721-023GRLF | Amphenol FCi | 10127721-023GRLF-MTK 3.0 02P D | 0 | |||
| 500-008B2R3GR-01 | Glenair Inc | MINI-D PROTECTIVE COVER |
| 0 | ||
| 10127721-063GRLF | Amphenol FCi | 10127721-063GRLF-MTK 3.0 06P D | 0 | |||
| 10127721-163GRLF | Amphenol FCi | 10127721-163GRLF-MTK 3.0 16P D | 0 | |||
| 10127721-183GRLF | Amphenol FCi | 10127721-183GRLF-MTK 3.0 18P D | 0 | |||
| 10127721-243GRLF | Amphenol FCi | 10127721-243GRLF-MTK 3.0 24P D | 0 | |||
| AT13-6P-BM03GRY | Amphenol Sine Systems | 6 POSITION RIGHT ANGLE FLANGE |
| 0 | ||
| ATP13-4P-BM03GRY | Amphenol Sine Systems | 4 POSITION 90 PCB FLANGE MOUN |
| 0 | ||
| ATP15-2P-BM03GRY | Amphenol Sine Systems | 2 POSITION STRAIGHT PCB FLANGE | 0 | |||
| ATP15-6P-BM03GRY | Amphenol Sine Systems | 6 POSITION PCB FLANGE MOUNT RE | 0 | |||
| AT15-6P-BM03GRY | Amphenol Sine Systems | 6 POSITION STRAIGHT FLANGE MOU |
| 0 | ||
| ATP13-6P-BM03GRY | Amphenol Sine Systems | 6 POSITION 90 PCB FLANGE MOUNT | 0 | |||
| 10127721-043GRLF | Amphenol FCi | 10127721-043GRLF-MTK 3.0 04P D | 0 | |||
 NexGen Digital | UPA2793GR(01)-E2-AY | Renesas Electronics Corporation | RoHS : Compliant | 590,000 | ||
| RLR05C8203GR | Vishay Dale | RoHS : Not Compliant | 29 | |||
 PEI Genesis | 2002G3-GRYKIT | Anderson Power Products |
| 0 | ||
| 2002G3-GRY | Anderson Power Products |
| 0 | |||
| 2002G3-GRY-BK | Anderson Power Products |
| 0 | |||
| AT13-6P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
| ATP13-4P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
| ATP15-2P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
| AT15-6P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
| AT04-4P-BM03GRN | Amphenol Sine Systems |
| 0 | |||
| ATP13-2P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
| ATP15-4P-BM03GRY | Amphenol Sine Systems |
| 0 | |||
 Powell Electronics | AT15-6P-BM03GRY | Amphenol Sine Systems | Connector |
| 433 | |
| AT13-6P-BM03GRY | Amphenol Sine Systems | Connector |
| 89 | ||
| ATP13-2P-BM03GRY | Amphenol Sine Systems | Connector |
| 79 | ||
| ATP15-2P-BM03GRY | Amphenol Sine Systems | Connector |
| 50 | ||
| 1590B3GR | Hammond Manufacturing | DIECAST 4.57X3.03X1.48 PAINTED RoHS : Compliant |
| 12 | ||
| AML26GBF2CA03GR | Honeywell Sensing and Control | Switch |
| 7 | ||
| AML25GBF2AA03GR | Honeywell Sensing and Control | Push Buttons |
| 4 | ||
| AML26GBE3AA03GR | Honeywell Sensing and Control | Switch |
| 1 | ||
 Richardson RFPD | XMC0204F1-03GR1 | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 458 | |
| XEC24A6-03GR1 | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 250 | ||
| XEC24E3-03GR1 | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 79 | ||
| ADR293GRZ | Analog Devices Inc | V-Ref Precision 5V 5mA 8-Pin SOIC N Tube RoHS : Compliant | 0 | |||
| XMC0660B1-03GR | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 0 | ||
| LCWC0603GR33GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| LCWC0603GR18GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| XMC0204E2-03GR | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 0 | ||
| XMC0204E2-03GR1 | TTM Technologies | RF HYBRID COUPLER RoHS : Compliant |
| 0 | ||
| LCWC0603GR15GTAR | Kyocera AVX Components | Wire Wound Chip Inductor RoHS : Compliant | 0 | |||
| XEC24A6-03GR | TTM Technologies | RF HYBRID COUPLER RoHS : Not Compliant |
| 0 | ||
| LCWC0603GR27GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| XMC0204F1-03GR | TTM Technologies | RF HYBRID COUPLER RoHS : Not Compliant |
| 0 | ||
| XMC0812F1-03GR1 | TTM Technologies | XMC0812F1-03GR1 RoHS : Not Compliant | 0 | |||
| LCWC0603GR22GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
 Rutronik | BY133G_R2_00001 | PanJit Touch Screens | SI-DIODE 1A 1300V DO41 RoHS : Compliant |
| 405,000 | |
| CC0603GRNPO9BN101 | YAGEO Corporation | KC 100pF 0603 2% 50V NP0 RoHS : Compliant |
| 96,000 | ||
| CC0603GRNPO9BN220 | YAGEO Corporation | KC 22pF 0603 2% 50V NP0 RoHS : Compliant |
| 52,000 | ||
| CC0603GRNPO9BN270 | YAGEO Corporation | KC 27pF 0603 2% 50V NP0 RoHS : Compliant |
| 48,000 | ||
| CC0603GRNPO9BN820 | YAGEO Corporation | KC 82pF 0603 2% 50V NP0 RoHS : Compliant |
| 36,000 | ||
| CC0603GRNPO9BN180 | YAGEO Corporation | KC 18pF 0603 2% 50V NP0 RoHS : Compliant |
| 32,000 | ||
| CC0603GRNPO9BN330 | YAGEO Corporation | KC 33pF 0603 2% 50V NP0 RoHS : Compliant |
| 28,000 | ||
| CC0603GRNPO9BN120 | YAGEO Corporation | KC 12pF 0603 2% 50V NP0 RoHS : Compliant |
| 24,000 | ||
| CC0603GRNPO9BN182 | YAGEO Corporation | KC 1,8nF 0603 2% 50V NP0 RoHS : Compliant |
| 16,000 | ||
| CC0603GRNPO9BN221 | YAGEO Corporation | KC 220pF 0603 2% 50V NP0 RoHS : Compliant |
| 12,000 | ||
| CC0603GRNPO9BN102 | YAGEO Corporation | KC 1,0nF 0603 2% 50V NP0 RoHS : Compliant |
| 12,000 | ||
| CC0603GRNPO9BN331 | YAGEO Corporation | KC 330pF 0603 2% 50V NP0 RoHS : Compliant |
| 12,000 | ||
| CC0603GRNPO9BN100 | YAGEO Corporation | KC 10pF 0603 2% 50V NP0 RoHS : Compliant |
| 4,000 | ||
| CC0603GRNPO9BN680 | YAGEO Corporation | KC 68pF 0603 2% 50V NP0 RoHS : Compliant |
| 4,000 | ||
| CC0603GRNPO9BN271 | YAGEO Corporation | KC 270pF 0603 2% 50V NP0 RoHS : Compliant |
| 4,000 | ||
 Chip 1 Exchange | SZMMBZ4252T3G-ROSFGD | onsemi | INSTOCK | 20,000 | ||
| QRE1113GR | INSTOCK | 3,794 | ||||
| SN74ALVTH16373GR | INSTOCK | 3,697 | ||||
| C0603GRNP09BN120 | INSTOCK | 3,156 | ||||
| UN144356508ABF53GR5 | Qualcomm | INSTOCK | 2,000 | |||
| QRE1113GR | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 1,000 | |||
| 020133GR004M5A2ZL | Suyin Group | INSTOCK | 412 | |||
| 020053GR009M2606L | Suyin Group | INSTOCK | 199 | |||
| 020173GR004G57BZL | Suyin Group | INSTOCK | 22 | |||
| MSTBVA 2,5/ 3-G-RN 1944602 | Phoenix Contact | INSTOCK | 2 | |||
 Avnet Abacus | CC0603GRNPO9BN220 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 22 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN220) RoHS : Compliant | 176,000 | ||
| CC0603GRNPO9BN151 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 150 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN151) RoHS : Compliant | 152,000 | |||
| CC0603GRNPO9BN680 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 68 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN680) RoHS : Compliant | 128,000 | |||
| CC0603GRNPO9BN101 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 100 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN101) RoHS : Compliant | 64,000 | |||
| CC0603GRNPO9BN121 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 120 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN121) RoHS : Compliant | 28,000 | |||
| CC0603GRNPO9BN120 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 12 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN120) RoHS : Compliant | 8,000 | |||
| CC0603GRNPO9BN102 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 1000 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN102) RoHS : Compliant | 4,000 | |||
| CC0603GRNPO9BN100 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 10 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series - Tape and Reel (Alt: CC0603GRNPO9BN100) RoHS : Compliant | 4,000 | |||
| RLR05C6803GRRE6 | Vishay Intertechnologies | Through Hole Resistor 680 kohm RLR Series 125 mW 2 Axial Leaded 200 V Metal Film - Tape and Reel (Alt: RLR05C6803GRRE6) RoHS : Not Compliant | 0 | |||
| RLR07C2703GRRE5 | Vishay Intertechnologies | Through Hole Resistor 270 kohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C2703GRRE5) RoHS : Not Compliant | 0 | |||
| RLR07C3903GRR36 | Vishay Intertechnologies | Through Hole Resistor 390 kohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C3903GRR36) RoHS : Not Compliant | 0 | |||
| V3F418A400Y3GRP | Kyocera AVX Components | Var MLV 13VAC18VDC 20A 255V 0612 SMD TR (Alt: V3F418A400Y3GRP) RoHS : Compliant | 0 | |||
| RLR05C9103GRB14 | Vishay Intertechnologies | Through Hole Resistor 910 kohm RLR Series 125 mW 2 Axial Leaded 200 V Metal Film (Alt: RLR05C9103GRB14) RoHS : Not Compliant | 0 | |||
| CC0603GRNPO9BN152 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 1500 pF 50 V 0603 1608 Metric 2 C0G NP0 CC Series (Alt: CC0603GRNPO9BN152) RoHS : Compliant | 0 | |||
| CC0603GRNPO0BN221 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 220 pF 100 V 0603 1608 Metric 2 C0G NP0 CC Series (Alt: CC0603GRNPO0BN221) RoHS : Compliant | 0 | |||
Avnet Asia | BZT52B13-G RHG | Taiwan Semiconductor | Diode Zener Single 13V 2% 0.41W 2-Pin SOD-123 Plastic T/R (Alt: BZT52B13-G RHG) RoHS : Compliant |
| 9,000 | |
| TLP293(GRL-TPL,E(T | Toshiba America Electronic Components | (Alt: TLP293(GRL-TPL,E(T) RoHS : Compliant | 0 | |||
| 2SC2713-GR,LF(B | Toshiba America Electronic Components | Transistor GP BJT NPN 120V 100mA 3-Pin TO-236MOD (Alt: 2SC2713-GR,LF(B) RoHS : Compliant | 0 | |||
| RLR07C2203GRB14 | Vishay Intertechnologies | Through Hole Resistor, 220 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film (Alt: RLR07C2203GRB14) RoHS : Compliant | 0 | |||
| QSB363GR | onsemi | Subminiature Plastic Silicon Infrared Phototransistor. (Alt: QSB363GR) RoHS : Compliant | 0 | |||
| AT15-6P-BM03GRY | Amphenol Corporation | Automotive Connector, AT BoardLock Series, Straight Receptacle, 6 Contacts, PCB Pin (Alt: AT15-6P-BM03GRY) RoHS : Compliant | 0 | |||
| QEB363GR | onsemi | Subminiature Plastic Infrared Emitting Diode. (Alt: QEB363GR) RoHS : Compliant | 0 | |||
| 2SA1163-GR,LF(T | Toshiba America Electronic Components | Transistor GP BJT PNP 120V 100mA 3-Pin SC-59 T/R (Alt: 2SA1163-GR,LF(T) RoHS : Compliant | 0 | |||
| TLP183(GR-TPL,E(T | Toshiba America Electronic Components | (Alt: TLP183(GR-TPL,E(T) RoHS : Compliant | 0 | |||
| QRE1113GR | onsemi | (Alt: QRE1113GR) RoHS : Compliant | 0 | |||
| KY DDLM32.23-GRHS-46-D1G2-100-R18 | ams OSRAM Group | OOSKY DDLM32.23-GRHS-46-D1G2-100-R18 Q65 (Alt: KY DDLM32.23-GRHS-46-D1G2-100-R18) RoHS : Compliant | 0 | |||
| TLP383(GRL-TPL,E(T | Toshiba America Electronic Components | Optocoupler DC-IN 1-CH DC-OUT 4-Pin SO6L Embossed T/R (Alt: TLP383(GRL-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP293(GRL-TPR,E(T | Toshiba America Electronic Components | TR-CPL, DC-INPUT, 1/2 PITCH (Alt: TLP293(GRL-TPR,E(T) RoHS : Compliant | 0 | |||
| TLP293(GRH-TPL,E(T | Toshiba America Electronic Components | TOSTLP293(GRH-TPL,E(T PHOTO COUPLER (Alt: TLP293(GRH-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP383(GRL-TPR,E(T | Toshiba America Electronic Components | Optocoupler 1-CH Open Collector-OUT 5000Vrms 4-Pin SOIC T/R (Alt: TLP383(GRL-TPR,E(T) RoHS : Compliant | 0 | |||
 Avnet Silica | QSB363GR | onsemi | Subminiature Plastic Silicon Infrared Phototransistor ONSSPCISTNJZ8E4V (Alt: QSB363GR) RoHS : Compliant | 20,000 | ||
| QEB363GR | onsemi | Subminiature Plastic Infrared Emitting Diode ONSSPCISTNJZ8E4V (Alt: QEB363GR) RoHS : Compliant | 6,000 | |||
| TW8817-TA3-GRST | Renesas Electronics Corporation | (Alt: TW8817-TA3-GRST) RoHS : Compliant | 1,000 | |||
| TW8817-TA3-GRS | Renesas Electronics Corporation | (Alt: TW8817-TA3-GRS) RoHS : Compliant | 119 | |||
| MP6523GR-Z | Monolithic Power Systems | (Alt: MP6523GR-Z) RoHS : Compliant | 0 | |||
| MP18913GRPE-Z | Monolithic Power Systems | QFN1030V 03A High Frequency Transformer Driver (Alt: MP18913GRPE-Z) RoHS : Compliant | 0 | |||
| TW8816-LB3-GRS | Renesas Electronics Corporation | (Alt: TW8816-LB3-GRS) RoHS : Compliant | 0 | |||
| BY133G_R2_00001 | PanJit Semiconductor | PECBY133GTR13HF5KDO41GPPAXIALPSG10HPJDO41ODMMS01AXIAL ASMS01 (Alt: BY133G_R2_00001) RoHS : Compliant | 0 | |||
| UPA3753GR-E1-AX | Renesas Electronics Corporation | (Alt: UPA3753GR-E1-AX) RoHS : Compliant | 0 | |||
| MP2673GR-0000-Z | Monolithic Power Systems | (Alt: MP2673GR-0000-Z) RoHS : Compliant | 0 | |||
| MPQ6523GR-AEC1-Z | Monolithic Power Systems | (Alt: MPQ6523GR-AEC1-Z) RoHS : Compliant | 0 | |||
| MP2703GRP-0000-P | Monolithic Power Systems | 26V INPUT 1A LINEAR CHARGERWITH BATTERY DIAGNOSTIC FOR 1 OR 2 CELL (Alt: MP2703GRP-0000-P) RoHS : Compliant | 0 | |||
| MPQ18913GRPE-AEC1-Z | Monolithic Power Systems | (Alt: MPQ18913GRPE-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ18913GRPE-A-AEC1-Z | Monolithic Power Systems | (Alt: MPQ18913GRPE-A-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ18913GRPE-A-AEC1-P | Monolithic Power Systems | 30V 03A HIGHFREQUENCY TRANSFORMER DRIVER FOR AUTOMOTIVE APPLICATIONS AECQ100 (Alt: MPQ18913GRPE-A-AEC1-P) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | UE910-N3G-R | Telit | UE910-N3G-REEL |
| 1 | |
 Chip-Germany GmbH | 870-943 GRAU | Wagmer | 10 | |||
| 03533 GRÖßE 00, GL 125A | Wohmer | 6 | ||||
| 03573 GRÖßE 2 GL 315A | Wohmer | 2 | ||||
 Component Electronics, Inc | CCF-07243GR36 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,500 | |
| SOMC1401223GR61 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,000 | ||
| 3073-GRN/YELL-1000 | Alpha Wire | IN STOCK SHIP TODAY |
| 700 | ||
| SJ-5023-GRAY | 3M | IN STOCK SHIP TODAY |
| 420 | ||
| PUK-3-GREY | KLEMAN | IN STOCK SHIP TODAY |
| 200 | ||
| 23GR10K-T7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY |
| 180 | ||
| NPP/PUK3-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 100 | |||
| RLR20C1503GRB14 | CGW | IN STOCK SHIP TODAY |
| 89 | ||
| CB03-GREEN | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 59 | ||
| MPL503-G-RANGE-A | MPL | IN STOCK SHIP TODAY |
| 23 | ||
| CCR07CG273GR | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 15 | ||
| RLR20C133GR | IN STOCK SHIP TODAY |
| 13 | |||
| IM03GR | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 3073-GR001 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | HXN1/2-13-GR5-STL-ZI | HEX NUT | Hex Nut |
| 4,154 | |
| HL61213-GRB | The Ohio Nut And Bolt Co |
| 3,595 | |||
| HHC5/8-11X3-GR5-ZY | HEX HEAD CAP SCREW |
| 746 | |||
| HHM5/16-18X3-GR8-BLK-PHOS | HEX HEAD MACHINE SC | Hex Head Machine Screw |
| 499 | ||
| HHC3/8-16X3-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 495 | ||
| CAB1/2-13X3-GR5-ZI | CARRIAGE BOLT | Carriage Bolt |
| 130 | ||
| HHC3/8-16X3-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 110 | ||
| HHC1/4-20X3-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 92 | ||
| HXN1/2-13-GR5-STL-BO | HEX NUT | Hex Nut |
| 80 | ||
| HHC3/4-10X3-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 64 | ||
| HXN1/2-13-GR8-STL | HEX NUT | Hex Nut |
| 26 | ||
| HHC1/2-13X3-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 23 | ||
| HHC3/8-24X3-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 6 | ||
| HHC3/8-24X3-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 2 | ||
| 388-3-GRB | GRIPCO STANLEY | 0 | ||||
 EBV Elektronik | BZT52B33-G RHG | Taiwan Semiconductor | Diode Zener Single 33V 2 041W 2Pin SOD123 Plastic TR (Alt: BZT52B33-G RHG) RoHS : Compliant | 171,000 | ||
| BZT52B13-G RHG | Taiwan Semiconductor | Diode Zener Single 13V 2 041W 2Pin SOD123 Plastic TR (Alt: BZT52B13-G RHG) RoHS : Compliant | 168,000 | |||
| TLP383(GR-TPL,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO (Alt: TLP383(GR-TPL,E(T) RoHS : Compliant | 81,000 | |||
| BZT52B3V3-G RHG | Taiwan Semiconductor | Diode Zener Single 33V 2 410mW 2Pin SOD123 Surface Mount TR (Alt: BZT52B3V3-G RHG) RoHS : Compliant | 78,000 | |||
| TTA1713-GR,LF | Toshiba America Electronic Components | Silicon Transistor PNP 45V 500mA 3Pin SC105AA (Alt: TTA1713-GR,LF) RoHS : Compliant | 3,000 | |||
| QSB363GR | onsemi | Subminiature Plastic Silicon Infrared Phototransistor ONSSPCISTNJZ8E4V (Alt: QSB363GR) RoHS : Compliant | 2,000 | |||
| TLP293(GR,E(T | Toshiba America Electronic Components | TRCPL DCINPUT 12 PITCH (Alt: TLP293(GR,E(T) RoHS : Compliant | 525 | |||
| QEB373GR | onsemi | Infrared Emitter 875 nm 12 T34 18mm 16 mWSr 800 ns 800 ns (Alt: QEB373GR) RoHS : Compliant | 0 | |||
| BZT52B4V3-G RHG | Taiwan Semiconductor | Diode Zener Single 43V 2 410mW 2Pin SOD123 Surface Mount TR (Alt: BZT52B4V3-G RHG) RoHS : Compliant | 0 | |||
| TLP293(GR-TPL,E(T | Toshiba America Electronic Components | Optocoupler ACIN 1CH DCOUT 4Pin SO Embossed TR (Alt: TLP293(GR-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP293(GRL-TPL,E(T | Toshiba America Electronic Components | TRCPL DCINPUT 12 PITCH (Alt: TLP293(GRL-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP183(GRL-TPL,E(T | Toshiba America Electronic Components | (Alt: TLP183(GRL-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP183(GRH-TPL,E(T | Toshiba America Electronic Components | (Alt: TLP183(GRH-TPL,E(T) RoHS : Compliant | 0 | |||
| TLP383(GRH-TPL,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO6L Embossed TR (Alt: TLP383(GRH-TPL,E(T) RoHS : Compliant | 0 | |||
| GAPSLM31.23-GRGT-23-1-100-R18 | ams OSRAM Group | (Alt: Q65113A1499) RoHS : Compliant | 0 | |||
 FDH Electronics | ALPHA 5853-GRN | Alpha Wire | Hook-Up Wire |
| 595 | |
| ALPHA 5853-GRY | Alpha Wire | Wire and Cable | 500 | |||
| CCR07CG103GR | Kyocera AVX Components | Capacitor RoHS : Not Compliant |
| 5 | ||
| AML26GBF2DA03GR | Honeywell Sensing and Control | Switches |
| 0 | ||
| AML25GBF2AA03GR | Honeywell Sensing and Control | Switches |
| 0 | ||
| 500-008B2R3GR-01 | Glenair Inc | Connector |
| 0 | ||
| IME03GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| IMC03GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| AML25GBF2CA03GR | Honeywell Sensing and Control | Switches |
| 0 | ||
| IM23GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| AML26GBF2CA03GR | Honeywell Sensing and Control | Switches |
| 0 | ||
| IM13GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| IM03GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| IM43GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
 Flip Electronics | QSB363GR | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,220 | |
| QEB363GR | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,704 | ||
| QEB373GR | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,560 | ||
 Maritex | QRE1113GR | onsemi | Photoelectric Sensors; QRE1113GR; ON SEMICONDUCTOR; Surface Mount; 940 nm; 1.87 mm; SMD/SMT RoHS : Compliant |
| 30,238 | |
| IM23GR | TE Connectivity | Signal Relays; IM23GR; TE CONNECTIVITY; 5.65 mm; 2 A; 50 mW; 500 ? RoHS : Compliant |
| 1,779 | ||
| FR3G_R1_00001 | PanJit Semiconductor | Rectifier Diodes & Bridges; FR3G_R1_00001; PANJIT; 1 �A; 3 A; 2; 100 A RoHS : Compliant |
| 739 | ||
| P1613-GR-LN-CT | CONNTHERM | Cabel gland P16; nylon; PG16 10-13mm; grey; with lock nut |
| 55 | ||
 Pasternack Enterprises US | PE3C8813/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable using 75 Ohm 1694A-GR coax. | 1,809 | ||
| PE3C8813/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 983 | ||
| PE3C8743/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax. | 573 | |||
| PE3C8813/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 215 | ||
| PE3C8743/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-36, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-36 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax. |
| 190 | ||
| PE3C8813/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 129 | ||
| PE3C8743/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-72, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-72 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax. |
| 95 | ||
| PE3C8743/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C8813/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/GR-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C8873/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8743/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-300, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-300 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax. |
| 22 | ||
| PE333/GR/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P300LL Coax with HeatShrink., Pasternack’s PE333/GR/HS SMA male to SMA male RF cable assembly using PE-P300LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE333/GR/HS can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE333/GR/HS RF cable has an FEP jacket of 0.300-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.346:1. This PE333/GR/HS SMA plug to SMA plug cable assembly is built with PE-P300LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 0 | |||
 TE Connectivity | IM03GR | TE Connectivity | IM03GR=IM RELAY 140mW 5V Relay & Contactor Type: General Purpose Signal Relay Current Type: DC Coil Magnetic System: Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 2 A General Purpose Signal Relay DC Polarized, Monostable 2 Form C DPDT-CO | Standard Signal Relay 2 Form C & 2 Co Cont | Part Number: IM03GR | Internal Number: 1-1462037-4 | TE Connectivity RoHS : Compliant |
| 37,547 | |
| IM43GR | TE Connectivity | IM43GR=IM RELAY 100mW 5V BIS Relay & Contactor Type: General Purpose Signal Relay Current Type: DC Coil Magnetic System: Bistable, 1 Coil Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 2 A General Purpose Signal Relay DC Bistable, 1 Coil 2 Form C DPDT-CO | Standard Signal Relay 2 Form C & 2 Co Cont | Part Number: IM43GR | Internal Number: 5-1462037-9 | TE Connectivity RoHS : Compliant |
| 25,606 | ||
| IME03GR | TE Connectivity | IME03GR=IM RELAY 140mW 5V 2NO Relay & Contactor Type: General Purpose Signal Relay Current Type: DC Coil Magnetic System: Polarized, Monostable Contact Arrangement: 2 Form A DPST-NO Contact Current Rating: 2 A General Purpose Signal Relay DC Polarized, Mostable 2 Form A DPST- | Signal Relay: 2 Form A & 2 Contact | Part Number: IME03GR | Internal Number: 1462043-3 | TE Connectivity RoHS : Compliant |
| 2,244 | ||
 Vyrian | 6713GR001 | Alpha Wire | Wire And Cable, 1 Conductor(s), 22AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 16,066 | ||
| TLP183(GRH,E | Toshiba America Electronic Components | Transistor Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 15,714 | |||
| RLR05C2003GRBSL | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.125W, 200000ohm, 200V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Not Compliant | 14,840 | |||
| RLR05C2003GRRE6 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.125W, 200000ohm, 200V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Not Compliant | 14,153 | |||
| 6823GR001 | Alpha Wire | Wire And Cable, 1 Conductor(s), 22AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 14,120 | |||
| LV5223GR-TE-L-E | onsemi | Display Driver, BICMOS, PQCC28 RoHS : Compliant | 12,800 | |||
| 6713GR005 | Alpha Wire | Wire And Cable, 1 Conductor(s), 22AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 10,854 | |||
| ADR293GRZ-REEL | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Compliant | 10,159 | |||
| RLR07C1003GRB14 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.25W, 100000ohm, 250V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Not Compliant | 10,073 | |||
| ADR293GRUZ-REEL7 | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, PDSO8 RoHS : Compliant | 9,413 | |||
| RLR20C5603GRB14 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.5W, 560000ohm, 350V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Not Compliant | 8,059 | |||
| UPC393GR(5)-9LG-E1-A | Renesas Electronics Corporation | Comparator, 2 Func, 2500uV Offset-Max, 1800ns Response Time, BIPolar, PDSO8 RoHS : Compliant | 6,994 | |||
| SN74ALVCH16373GRDR | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PBGA54 | 6,200 | |||
74ALVCH162373GRG4 | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 4,761 | |||
| UPA3753GR-E2-AX | Renesas Electronics Corporation | Power Field-Effect Transistor, 5A I(D), 60V, 0.072ohm, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 589 | |||
 Win Source Electronics | 2SA1163-GR CG | Toshiba America Electronic Components | Trans GP BJT PNP 120V 0.1A 150mW 3-Pin S-Mini |
| 526,800 | |
2SA1163-GR | Toshiba America Electronic Components | TRANS PNP 120V 0.1A SMINI RoHS : Compliant |
| 224,253 | ||
| 2SC2713-GR | Toshiba America Electronic Components | Audio Frequency General Purpose Amplifier Applications RoHS : Compliant |
| 178,600 | ||
| 2SC2713-GR(T5LPEWF | Toshiba America Electronic Components | Bipola Small Signal Transistor |
| 166,110 | ||
| TLP293(GR-TPL | Toshiba America Electronic Components | RoHS : Compliant |
| 120,000 | ||
| QSB363GR | Fairchild Semiconductor Corporation | PHOTOTRANS IR 940NM GW TOPLOOKER RoHS : Compliant |
| 60,693 | ||
| 2SC2713-GR(TE85L | Toshiba America Electronic Components |
| 60,000 | |||
| EMP8733-30VB03GRR | Elite Semiconductor Memory Technology Inc |
| 36,000 | |||
| IM03GR-5VDC | TE Connectivity |
| 32,990 | |||
| ALC269Q-VC3-GR | Realtek Semiconductor |
| 23,800 | |||
| QRE1113GR | Fairchild Semiconductor Corporation | SENSOR OPTO TRANS REFL SMD PHOTO RoHS : Compliant |
| 15,000 | ||
| TW8816-DELA3-GR | Intersil Corporation | IC LCD CTRLR 128LQFP |
| 3,567 | ||
| TW8816-LB3-GRS | Renesas Electronics Corporation | IC LCD CTRLR 128LQFP RoHS : Compliant |
| 3,190 | ||
| TW8816-LB3-GR | Renesas Electronics Corporation | IC VIDEO LCD CONTROLLER 128LQFP / Video Processor IC GPIO, I2C, SPI, Serial NTSC, PAL, SECAM 128-LQFP (14x20) Package RoHS : Compliant |
| 3,070 | ||
| 2SC2713-GR (TE85L.F) | Toshiba America Electronic Components |
| 1,150 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand