01212SF-R18 Price, Distributor, Stock

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

MF-01-210-60

Southco

Simple styling and numerous installation options make these latches extremely practical for a wide variety of entry-door applications. A series of attractive design and finish options provide appropriate accents.

M3-40-121-25

Southco

The M3 system uses multiple over-center latch mechanisms to provide the ultimate in consistent compression along the entire edge of an enclosure door. Available with multiple choices of stylish flush-handle actuators it can be installed to meet industry

060121347E

Essentra Components

21001-01218

Avdel

AVBOLT STR 38 FL ST 3PC

47-10-121-51

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

47-80-121-54

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

D8-316-3012-190

Southco

Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o

47-10-121-14

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

ECCO

100-0121-000

ITT Interconnect Solutions

5 : $18.11

2,629

97-3057-1012-1(676)

Amphenol Industrial Operations

5 : $9.72

484

031-0560-121

ITT Interconnect Solutions

5 : $4.58

197

19070-0121

Molex

RoHS : Compliant

1 : $0.3922

0190700121

Molex

RoHS : Compliant

1 : $0.4924

Flip Electronics

CY8C20121-SX1IT

Infineon Technologies AG

Stock, Ship Today

1 : $0.74

2,500

CY8C20121-SX1I

Infineon Technologies AG

Stock, Ship Today

1 : $0.87

1,450

Pasternack Enterprises US

PE3M0121-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 24 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 24 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-24, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-24 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax.

1 : $299.99
25 : $284.99
50 : $269.99

PE3M0121-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 36 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 36 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 36 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-36, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-36 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 36 inch length using M17/28-RG58 coax.

1 : $301.99
25 : $286.89
50 : $271.79

PE3M0121-30

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 30 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-30, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-30 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 30 inch length using M17/28-RG58 coax.

1 : $301.99
25 : $286.89
50 : $271.79

PE910121

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: 30 Degree, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. 2.92mm Plug to 2.92mm Jack 30 Degree Adapter., The 2.92mm 30 degree adapter PE910121 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.25:1. This RF adapter has a plug to jack gender configuration, which provides easier connections in tighter spaces. Our 2.92mm to 2.92mm adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 40 GHz. This in-series RF adapter has a dielectric withstanding voltage of 750 Vrms. This 2.92mm plug to 2.92mm jack adapter is one of the many RF components that ship the same business day as they are ordered. The PE910121 plug 2.92mm to jack 2.92mm adapter has a 30 degree body. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.316 dB. This RF adapter has a 0.969-inch length, 0.313-inch width, and 0.015 lbs weight. The PE910121 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our 2.92mm plug to 2.92mm jack 30 degree radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -55 to 105 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of 30 degree 2.92mm to 2.92mm radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz RF adapter that meets your requirements.

1 : $427.99
5 : $419.43
10 : $410.87
25 : $402.31

PE3C4012-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-FF430, RF Cable Type: PE-FF430, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Handheld RF Analyzer Rugged Phase Stable Cable 3.5mm Male to 3.5mm Female Cable 100 cm Length Using PE-FF430 Coax, RoHS., Radio frequency assembly handheld RF analyzer rugged phase stable cable 3.5mm male to 3.5mm female cable 100 cm length using PE-FF430 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Handheld RF analyzer rugged phase stable cable 3.5mm male to 3.5mm female cable 100 cm length using PE-FF430 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE3C4012-100CM, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE3C4012-100CM is built with PE-FF430 which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is sextuple shielded. RF specs on this 27 GHz maximum frequency 3.5mm male to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4012-100CM can also be used in the other direction and will be 3.5mm female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this handheld RF analyzer rugged phase stable cable 3.5mm male to 3.5mm female cable 100 cm length using PE-FF430 coax, RoHS.

1 : $1,540.0
25 : $1,463.0
50 : $1,386.0

PEWAN012-15OMT

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-12, Frequency, Min: 60 GHz, Frequency, Max: 90 GHz, Beam Width V: 33, Beam Width H: 28. WR-12 Waveguide Dual Polarized Horn Antenna, 60 GHz to 90 GHz Frequency Range, 15 dBi Nominal Gain, UG-387/U Flange. Pasternack’s PEWAN012-15OMT WR-12 waveguide horn is also known as a waveguide horn antenna. This WR-12 probe waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 60 to 90 GHz. The probe antenna with linear/circular polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 2.03 inches, a width of 0.8 inches, and a weight of 0.19 lbs. Our WR-12 waveguide horn antenna has a typical vertical beam width of 33 degrees and a horizontal beam width of 28 degrees at 3 dB. Our antenna comes with a UG-387/U flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-12 probe antenna has a copper body with gold plating. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-12 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $6,900.0
5 : $6,624.0
10 : $6,348.0
25 : $6,072.0

PE3C0121-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to N Male With Times Connectors Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to N male with times connectors cable 48 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male with times connectors cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3C0121-48, can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male with times connectors cable 48 inch length using LMR-195 coax.

PE3W01213-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug to MCX Jack Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly MMCX plug to MCX jack cable 36 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to MCX jack cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a MCX cable connection on the other. Our MMCX to MCX cable assembly has a plug gender on end 1 and a jack on end 2. PE3W01213-36 can also be known as a MMCX male to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3W01213-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. MMCX male to MCX female cable assembly PE3W01213-36 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01213-36 can also be used in the other direction and will be a MCX jack to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MCX RF cable assembly as per your requirements.

1 : $59.99
25 : $56.99
50 : $53.99
100 : $51.59

PE3W01212

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to MCX Plug Cable Using RG141 Coax. PE3W01212 is a N male to MCX plug cable using RG141 coax. This Pasternack N male to MCX plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. Our male N to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01212 N male to MCX plug cable assembly is constructed with RG141 coax.

PE3W01213-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug to MCX Jack Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly MMCX plug to MCX jack cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to MCX jack cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a MCX cable connection on the other. Our MMCX to MCX cable assembly has a plug gender on end 1 and a jack on end 2. PE3W01213-48 can also be known as a MMCX male to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3W01213-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. MMCX male to MCX female cable assembly PE3W01213-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01213-48 can also be used in the other direction and will be a MCX jack to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MCX RF cable assembly as per your requirements.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

PE3W01211-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to MMCX Jack Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211-100CM can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211-100CM can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $64.99
25 : $61.74
50 : $58.49
100 : $55.89

PE3W01211-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to MMCX Jack Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211-200CM can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211-200CM can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $62.99
25 : $59.84
50 : $56.69
100 : $54.17

PE3W01218

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Female Bulkhead to MMCX Plug Right Angle Cable Using PE-C100-LSZH Coax. PE3W01218 is a N female bulkhead to MMCX plug right angle cable using PE-C100-LSZH coax. This Pasternack N female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MMCX for connector 2. N to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01218 N female bulkhead to MMCX plug right angle cable assembly is constructed with PE-C100-LSZH coax.

PE3C10121

Pasternack Enterprises

PE3W01218/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female Bulkhead Cable Using PE-C100-LSZH Coax with HeatShrink. PE3W01218/HS is a MMCX plug right angle to N female bulkhead cable using PE-C100-LSZH coax. This Pasternack MMCX plug right angle to N female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01218/HS MMCX plug right angle to N female bulkhead cable assembly is constructed with PE-C100-LSZH coax.

TE Connectivity

1863012-1

TE Connectivity

01P UMNL CAP HSG Number of Positions: 1 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 1 Cap Housing Crimp | Part Number: 1863012-1 | Internal Number: 1863012-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.27
1,000 : $0.31
500 : $0.35
250 : $0.37
100 : $0.42
50 : $0.46
25 : $0.49
10 : $0.55
1 : $0.61

4,466

AEDC113NN00001215000

TE Connectivity

623 RECEPTACLE ANGLED ROTATABLE Connector System: Cable-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 17 Circular Connector Shell Size: 23 Sealable: No Cable-to-Panel Circular Connector Receptacle 17 23 | Standard Circular Connector | Part Number: AEDC113NN00001215000 | Internal Number: AGC113N00001215000 | TE Connectivity
RoHS : Compliant

25 : $26.22
10 : $28.23
1 : $30.25

240

55PC0121-20-6/9

TE Connectivity

55PC0121-20-6/9 Cable Type: Spec 55 Operating Voltage: 600 VAC Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 20 AWG Spec 55 600 VAC Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Twisted Pair Cabling | Part Number: 55PC0121-20-6/9 | Internal Number: 559581-000 | Alias Number: 8-1194416-2 | 20 AWG
RoHS : Compliant

1 : $0.87

109

382A012-12-0

TE Connectivity

382A012-12-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 12 Material Systems Code: 200 Adhesive Requirement: Adhesive Purchased Separately Y Shape 3 12 200 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 382A012-12-0 | Internal Number: 811032-000 | Alias Number: 6-1196302-5 | TE Connectivity
RoHS : Compliant

1 : $97.03

T1340100121-000

TE Connectivity

H10B-TGH-RO-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1340100121-000 | Internal Number: T1340100121-000 | TE Connectivity
RoHS : Compliant

25 : $20.44
10 : $22.01
1 : $23.58

T1220160121-000

TE Connectivity

H16B-TG-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1220160121-000 | Internal Number: T1220160121-000 | TE Connectivity
RoHS : Compliant

50 : $16.27
25 : $17.22
10 : $18.18
1 : $19.14

T1230160121-000

TE Connectivity

H16B-TSH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1230160121-000 | Internal Number: T1230160121-000 | TE Connectivity
RoHS : Compliant

25 : $20.5
10 : $22.08
1 : $23.66

T1330240121-000

TE Connectivity

H24B-TSH-RO-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1330240121-000 | Internal Number: T1330240121-000 | TE Connectivity
RoHS : Compliant

50 : $22.81
25 : $24.15
10 : $25.49
1 : $26.84

1-2273012-1

TE Connectivity

M8 x 1.0 Angled socket Pigtail LED Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | M8 Pigtail & Right Angle & Led | Part Number: 1-2273012-1 | Internal Number: 1-2273012-1 | TE Connectivity
RoHS : Compliant

50 : $22.62
25 : $23.96
10 : $25.28
1 : $26.61

T1339160121-000

TE Connectivity

H16A-TSH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1339160121-000 | Internal Number: T1339160121-000 | TE Connectivity
RoHS : Compliant

50 : $18.95
25 : $20.06
10 : $21.18
1 : $22.29

T1340060121-000

TE Connectivity

H6B-TGH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1340060121-000 | Internal Number: T1340060121-000 | TE Connectivity
RoHS : Compliant

25 : $16.89
10 : $18.19
1 : $19.49

194012-1

TE Connectivity

PIN ASSY..070 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 9 Number of Rows: 3 PCB Mount Header Vertical Wire-to-Board 9 | PCB Header & Receptacle | Part Number: 194012-1 | Internal Number: 194012-1 | TE Connectivity
RoHS : Compliant

1,000 : $20.21
500 : $20.78
250 : $21.42
100 : $22.14
50 : $22.78
1 : $25.01

T4130012121-000

TE Connectivity

M12,REAR MOUNT,MALE,A,12P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 12 18 | M12 Panel Mount Solder Cup | Part Number: T4130012121-000 | Internal Number: T4130012121-000 | TE Connectivity
RoHS : Compliant

100 : $69.12
50 : $72.42
25 : $75.7
10 : $78.99
1 : $82.29

T1910160121-009

TE Connectivity

H16BPR-TSH-PG21-EMC-C Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Screwlock Hood Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1910160121-009 | Internal Number: T1910160121-009 | TE Connectivity
RoHS : Compliant

1 : $55.36

T1460240121-000

TE Connectivity

H24B-SDR-BO-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1460240121-000 | Internal Number: T1460240121-000 | TE Connectivity
RoHS : Compliant

25 : $33.26
10 : $35.81
1 : $38.37

Venkel Ltd.

C0603X7R500-121KNP

VENKEL LTD

Chip Capacitor;0603;X7R;50V;120pF;�10%
RoHS : Compliant

104,000

C0603C0G500-121GNR

VENKEL LTD

Chip Capacitor;0603;C0G;50V;120pF;�2%
RoHS : Compliant

8,000

SMPI404012-150NU

VENKEL LTD

Square Miniature Power Inductor;404012;15uH;�30%
RoHS : Compliant

C0603HQN250-121GNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;120pF;�2%
RoHS : Compliant

C0402C0G500-121JNP

VENKEL LTD

Chip Capacitor;0402;C0G;50V;120pF;�5%
RoHS : Compliant

C0402C0G500-121KNE

VENKEL LTD

Chip Capacitor;0402;C0G;50V;120pF;�10%
RoHS : Compliant

C0805X7R500-121JNP

VENKEL LTD

Chip Capacitor;0805;X7R;50V;120pF;�5%
RoHS : Compliant

C0805X7R500-121KNE

VENKEL LTD

Chip Capacitor;0805;X7R;50V;120pF;�10%
RoHS : Compliant

SMPI303012-150MT

VENKEL LTD

Square Miniature Power Inductor;303012;15uH;�20%
RoHS : Compliant

MLF2012-150KT

VENKEL LTD

Multilayer Chip Inductor;0805;15uH;�10%
RoHS : Compliant

C0402C0G500-121FNE

VENKEL LTD

Chip Capacitor;0402;C0G;50V;120pF;�1%
RoHS : Compliant

C0201X7R160-121KNP

VENKEL LTD

Chip Capacitor;0201;X7R;16V;120pF;�10%
RoHS : Compliant

C0603HQN250-121FNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;120pF;�1%
RoHS : Compliant

AGC0402C0G500-121JNP

VENKEL LTD

Auto Grade Capacitor;0402;C0G;50V;120pF;�5%
RoHS : Compliant

MLF2012-150MT

VENKEL LTD

Multilayer Chip Inductor;0805;15uH;�20%
RoHS : Compliant

Vyrian

1001214

Scs Electronic Material Solutions Division

18,296

2301218

Scs Electronic Material Solutions Division

16,921

TEP100-1216-CM

Traco Electronic Ag

DC-DC Regulated Power Supply Module, 1 Output, 100W, Hybrid

13,547

PTKM100-121H

Api Delevan

General Purpose Inductor, 100uH, 10%, 1 Element, Ferrous Alloy-Core

9,967

55A0121-26-6/9

TE Connectivity

Wire And Cable, 2 Conductor(s), 26AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

8,139

22-01-2165

Molex

Board Connector, 16 Contact(s), 1 Row(s), Female, 0.1 inch Pitch, Crimp Terminal, Locking, White Insulator, Plug
RoHS : Compliant

7,379

55A0121-24-0/6

TE Connectivity

Wire And Cable, 2 Conductor(s), 24AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

6,727

44A0121-20-0/9-MX

TE Connectivity

Wire And Cable, 2 Conductor(s), 20AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

6,579

382A012-12-0

TE Connectivity

HEAT SHRINK 2-WAY JUNCTION, FLUORO-ELASTOMER, 13.2 ID Before Shrink, 2:1 Shrink Ratio, BLACK
RoHS : Compliant

6,446

5962-01-214-2171

Texas Instruments

OTP ROM, 512X8, 85ns, TTL, CDIP20
RoHS : Not Compliant

5,421

BQ501210EVM-756

Texas Instruments

3,021

DF8064101211300/SR0VY

Intel Corporation

RISC Microprocessor, 64-Bit, 1860MHz, CMOS, PBGA559
RoHS : Compliant

2,193

X1A000121000512

Seiko Epson Corporation

Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom
RoHS : Compliant

720

512-501-21

Marl International

Single Color LED, Red, Smoked, T-4, 12.7mm

530

564AAAA000121CBGR

Skyworks Solutions Inc

LVPECL Output Clock Oscillator, 100MHz Nom
RoHS : Compliant

229

01212SF-R18 Distributor

Link URL