 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
012XG-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ECCO | 1000120000 | ITT Interconnect Solutions |
| 994 | ||
| 058-3012-000 | ITT Interconnect Solutions |
| 842 | |||
| 0570364012 | ITT Interconnect Solutions |
| 838 | |||
| 0400034012 | ITT Interconnect Solutions |
| 442 | |||
| CM111-02-0250-012 | ECCO Connectors |
| 167 | |||
| 10-823955-012 | Amphenol Industrial Operations |
| 80 | |||
| CM111-01-1000-012 | ECCO Connectors |
| 45 | |||
| CM111-03-1500-012 | ECCO Connectors |
| 29 | |||
0190230012 | Molex | RoHS : Compliant |
| 25 | ||
| 130774-0123-MS | ITT Interconnect Solutions |
| 11 | |||
| M39012/25-0021 | Amphenol SV Microwave | RoHS : Compliant |
| 6 | ||
| CM111-03-0500-012 | ECCO Connectors |
| 5 | |||
| 130775-0124-MS | ITT Interconnect Solutions |
| 3 | |||
| 130774-0012 | ITT Interconnect Solutions |
| 3 | |||
| 130775-0124 | ITT Interconnect Solutions |
| 3 | |||
 FDH Electronics | 80124012049 | EIS WIRE & CABLE, INC | Wire and Cable | 7,000 | ||
| 78013-0122-0012 | Silver State Wire & Cable | Wire and Cable | 1,000 | |||
| M39012/01-0125 | Delta Electronics Manufacturing Corp | RF / Coaxial | 875 | |||
| 10-123015-012 | Amphenol Aerospace | Connector Acc |
| 391 | ||
| S1770-1250-12A | SOURIAU-SUNBANK | Backshells & Ac | 70 | |||
| 100-123-0129 | BJG Electronics | BJG Microwave C | 45 | |||
| 701-2012-C13 | Corsair Electrical Connectors Inc | Connector 38999 | 25 | |||
| 701-2012-D13 | Corsair Electrical Connectors Inc | Connector 38999 | 25 | |||
| 701-2012-A13 | Corsair Electrical Connectors Inc | Connector 38999 | 24 | |||
| 701-2012-B13 | Corsair Electrical Connectors Inc | Connector 38999 | 24 | |||
| 100-123-0125 | BJG Electronics | BJG Microwave C | 9 | |||
| M39012/03-0012 | Winchester Interconnect | Connector |
| 1 | ||
| M39012/29-0012 | Delta Electronics Manufacturing Corp | Connector MIL M | 0 | |||
| SE6FMR7012A1.0-12 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| M39012/28-0012 | Delta Electronics Manufacturing Corp | Connector MIL M | 0 | |||
 Flip Electronics | FDPC1012S-P | onsemi | Stock, Ship Today RoHS : Compliant | 23,689 | ||
| A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | |||
| MWCT2012AVLH | NXP Semiconductors | Stock RoHS : Compliant | 12,800 | |||
| NVMJD012N06CLTWG | onsemi | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| NDCTR50120A | onsemi | Stock, Ship Today | 5,475 | |||
| CY25404ZXI012 | Infineon Technologies AG | Stock, Ship Today |
| 5,197 | ||
| LS1012AXE7EKA | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 4,200 | |||
| NCP152MX280120TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,123 | ||
| FFSH20120ADN-F085 | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,023 | ||
DF36012FYWV | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,704 | |||
NTSB20120CTT4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| FFSH30120ADN-F155 | onsemi | Stock, Ship Today RoHS : Compliant |
| 450 | ||
| S29GL01GP12FAI012 | Cypress Semiconductor | Stock RoHS : Not Compliant | 196 | |||
| S29GL128S10TFV012 | Cypress Semiconductor | Stock | 103 | |||
| NOIP1SE012KA-GTI | onsemi | Stock, Ship Today RoHS : Compliant |
| 8 | ||
 Pasternack Enterprises US | PE3C0121/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to N Male Low Loss Cable Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C0121/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable using LMR-195 coax with Times Microwave components with heatshrink. | 11,715 | ||
| PE3C0121/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-12 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 2,343 | ||
| PE3C0121LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with Times Microwave Components, LF Solder., Radio frequency assembly SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0121LF-12 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121LF-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121LF-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 12 inch length using LMR-195 coax with Times Microwave components, LF solder. |
| 2,343 | ||
| M39012/25-0012 | Pasternack Enterprises | Key Specifications, Connector Series: N, Connector Gender: Male, Chain Option: Chain. N Male Open Circuit Connector Cap with 3.75 Inch Chain. Pasternack’s M39012/25-0012 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a N-type connector series and a male gender. Our N-type male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 3.75-inch long chain to prevent loss and misplacement. Our M39012/25-0012 dust cap has a length of 4.95 inches, a width of 0.78 inches, and a height of 0.78 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this N-type male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0012 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. |
| 845 | ||
| PE34250-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 12 inches. SMA Male to TNC Male Cable 12 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly SMA male to TNC male cable 12 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 12 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE34250-12, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE34250-12 is built with RG55 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34250-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 12 inch length using 53 Ohm RG55 coax. |
| 737 | ||
| PE3C0120-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle with Times Connectors Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0120-12, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax. |
| 604 | ||
| PE3010-12 | Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1UHFConnector Gender 1MaleConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 150Connector Series 2BananaConnector Gender 2PlugConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG58C/URF Cable TypeRG58RF Cable Impedance50. UHF Male to Banana Plug Cable 12 Inch Length Using RG58 Coax. Very low frequency equipment test lead cable assembly PE3010-12 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a UHF cable connector on side 1. Our UHF test lead assembly has a banana connector on side 2. UHF to UHF RF test equipment lead cable is manufactured with male gender for side 1 and plug for side 2. UHF male to banana plug cable test lead for RF is constructed with RG58 cable and the impedance is 50 Ohm. PE3010-12 UHF male to banana plug test equipment lead using RG58 cable has a 12 inch length. Pasternack UHF to banana RG58 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with UHF to banana connectors and RG58 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. |
| 380 | ||
| PE37950-120 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 120 inches. N Male to N Female With Knurl Cable 120 Inch Length Using PE-C400 Coax., Radio frequency assembly N male to N female with knurl cable 120 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female with knurl cable 120 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE37950-120, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE37950-120 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37950-120 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female with knurl cable 120 inch length using PE-C400 coax. |
| 284 | ||
| PE3380-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Male Right Angle Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3380-12, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3380-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 12 inch length using 75 Ohm RG59 coax. |
| 117 | ||
| PE3M0120-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-12 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax. |
| 48 | ||
| PE-W187TF001-24 | Pasternack Enterprises | Key Specifications, Waveguide Size 1: WR-187, Flange Type 1: CMR, Waveguide Size 2: WR-187, Flange Type 2: CMR, Length: 24, Frequency, Min: 3.95 GHz, Frequency, Max: 5.85 GHz, Max Power (CW): 3,000. WR-187 Twistable Flexible Waveguide 24 Inch, CMR Flange Operating from 3.95 to 5.85 GHz. Pasternack’s PE-W187TF001-24 flexible waveguide is twistable in design. This twistable flexible waveguide assembly has WR-187 waveguides on sides 1 and 2, respectively. Our 24-inch twistable waveguide is one of over 40,000 RF, microwave, and millimeter wave components. The WR-187 flexible waveguide, along with our other RF components, will ship worldwide on the same day of purchase. This flexible waveguide assembly body is made of brass. The twistable waveguide is covered by a neoprene jacket which protects the waveguide and provides mechanical support. This waveguide section operates within the frequency range of 3.95 GHz to 5.85 GHz. Our WR-187 flexible waveguide is designed with the CMR flange on side 1 and side 2. This brass twistable waveguide assembly has a typical VSWR of 1.07:1. This flexible waveguide has CMR flanges made of brass for input and output. Our waveguide assembly has a typical insertion loss of 0.09 dB. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality WR-187 flexible/twistable waveguide assembly that meets your requirements. |
| 2 | ||
| PE3W01240-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax. |
| 0 | ||
| PE3012/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMB Jack to SMB Plug Cable Using RG174 Coax with HeatShrink. PE3012/HS is a SMB jack to SMB plug cable using RG174 coax. This Pasternack SMB jack to SMB plug cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our jack SMB to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3012/HS SMB jack to SMB plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE36120-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. MC-Card Plug to MC-Card Plug Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly MC-Card plug to MC-Card plug right angle cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36120-12, can also be known as a MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36120-12 is built with RG174 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36120-12 can also be used in the other direction and will be right angle MC-Card plug to MC-Card plug cable assembly if the opposite connectivity is required. MC-Card male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug right angle cable 12 inch length using RG174 coax. |
| 0 | ||
| PE3830-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Female Bulkhead Cable 12 Inch Length Using RG402 Coax., Radio frequency assembly N male to N female bulkhead cable 12 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 12 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3830-12, can also be known as a type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3830-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830-12 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 12 inch length using RG402 coax. |
| 0 | ||
 TE Connectivity | 2562-201-2031L | TE Connectivity | CONT SOC ASSY Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 20 AWG Wire Size: .5 mm² Gold (Au) Socket 20 AWG | Connector Contact | Part Number: 2562-201-2031L | Internal Number: 2562-201-2031L | TE Connectivity RoHS : Compliant |
| 147,683 | |
| 42801-2 | TE Connectivity | 187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42801-2 | Internal Number: 42801-2 | TE Connectivity RoHS : Compliant |
| 56,911 | ||
| T4141012041-000 | TE Connectivity | M12,REAR MOUNTING,FEMALE,A CODE,4P Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 18 | M12 Panel Mount PCB | Part Number: T4141012041-000 | Internal Number: T4141012041-000 | TE Connectivity RoHS : Compliant |
| 3,606 | ||
RLP73V2BR012FTDF.jpg) | TE Connectivity | RLP73V 2B R012 1% 1K RL Resistance Value: .012 Ω Element Type: Thick Film Resistor Type: Current Sensing Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 0.012 Ω Thick Film Current Sensing Resistor 1 % | Thick Film Resistor: Current Sense | Part Number: RLP73V2BR012FTDF | Internal Number: 2176055-3 | TE Connectivity RoHS : Compliant |
| 1,423 | ||
| SQZW1012RJ | TE Connectivity | SQZ10 12R 5% Resistance Value: 12 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Wirewound Resistor: Horizontal Mount | 12 Ω Wire Wound Power Resistor 5 % | Part Number: SQZW1012RJ | Internal Number: 1-1623797-3 | TE Connectivity RoHS : Compliant |
| 790 | ||
| DT06-12SC-P012 | TE Connectivity | PLG, 12P, GRN, N, SEAL RET, ENH KEY, C Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 12 V | Part Number: DT06-12SC-P012 | Internal Number: DT06-12SC-P012 | 1.59 mm | TE Connectivity RoHS : Compliant |
| 286 | ||
| THS10120RJ | TE Connectivity | THS10 120R 5% Resistance Value: 120 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 120 Ω Wire Wound 5 % Power Resistor | Part Number: THS10120RJ | Internal Number: 3-1879073-4 | TE Connectivity RoHS : Compliant |
| 259 | ||
| 2401254-1 | TE Connectivity | STRAIN RELIEF, AC Primary Product Color: Black Protection & Strain Relief Accessory Type: Strain Relief Cover Primary Product Material: PBT GF30 Strain Relief: Without Black Strain Relief Cover PBT GF30 Without | Automotive Connector Cap & Cover | Part Number: 2401254-1 | Internal Number: 2401254-1 | TE Connectivity RoHS : Compliant |
| 81 | ||
| T1230240121-000 | TE Connectivity | H24B-TSH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1230240121-000 | Internal Number: T1230240121-000 | TE Connectivity RoHS : Compliant |
| 29 | ||
| T1340060121-000 | TE Connectivity | H6B-TGH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1340060121-000 | Internal Number: T1340060121-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
| T1230100120-000 | TE Connectivity | H10B-TSH-M20 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1230100120-000 | Internal Number: T1230100120-000 | TE Connectivity RoHS : Compliant |
| 13 | ||
| T1920060120-009 | TE Connectivity | H6BPR-TGH-M20-EMC-C Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Screwlock Hood Top & Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1920060120-009 | Internal Number: T1920060120-009 | TE Connectivity RoHS : Compliant |
| 12 | ||
| T1330160129-000 | TE Connectivity | H16B-TSH-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1330160129-000 | Internal Number: T1330160129-000 | TE Connectivity RoHS : Compliant |
| 11 | ||
| T1920100125-009 | TE Connectivity | H10BPR-TGH-M25-EMC-C Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Screwlock Hood Top & Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1920100125-009 | Internal Number: T1920100125-009 | TE Connectivity RoHS : Compliant |
| 6 | ||
| 7012BD | TE Connectivity | 7012BD=RLY,STD,ON,2P,240VAC,50 Relay & Contactor Type: Time Delay Relay Current Type: AC Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 10 A Main Termination & Connection Type: Screw Terminals Time Delay Relay AC 2 Form C DPDT-CO 10 A | Electromechanical Relay | Part Number: 7012BD | Internal Number: 3-1423157-1 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Teledyne HiRel | 5962-87631012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
| 5962-89561012A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | |||
| CY37064P100-125AXC | Teledyne HiRel | PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED | 0 | |||
| 5962-87758012A | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-87623012A | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| 5962-88752012A | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
| 5962-89487012A | Teledyne HiRel | NAND GATE, QUAD 2-INPUT, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
| 5962-86074012A | Teledyne HiRel | SHIFT REGISTER, 8-BIT SERIAL/PARALLEL WITH SIGN EXTEND AND 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-87552012A | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-87613012A | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
| 5962-87695012A | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-88555012A | Teledyne HiRel | REGISTER, D-TYPE, HEX PARALLEL RoHS : Not Compliant | 0 | |||
| 5962-87761012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-89767012A | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-87626012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | CR0201-20W-3012FT | VENKEL LTD | Chip Resistor;0201;1/20W;30.1K;�1% RoHS : Compliant | 0 | ||
| CRS0201-20W-3012FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;30.1K;�1% RoHS : Compliant | 0 | |||
| LMCI0201-2N2BT | VENKEL LTD | Low Value Multilayer Chip Inductor;0201;2.2nH;�0.1nH RoHS : Compliant | 0 | |||
| MLF2012-R27KT | VENKEL LTD | Multilayer Chip Inductor;0805;0.27uH;�10% RoHS : Compliant | 0 | |||
| MELFC0207-VC-3012FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;30.1K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-3012BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;30.1K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-3012CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;30.1K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-1012AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;10.1K;�0.05% RoHS : Compliant | 0 | |||
| SMPI404012-2R2MU | VENKEL LTD | Square Miniature Power Inductor;404012;2.2uH;�20% RoHS : Compliant | 0 | |||
| SMPI404012-6R8MU | VENKEL LTD | Square Miniature Power Inductor;404012;6.8uH;�20% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1012BT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;10.1K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1012AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;10.1K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-1012AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;10.1K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0201-20W-C-1960DT | VENKEL LTD | Thin Film CR;0201;1/20W;�50PPM;196R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0201-20W-C-2400DT | VENKEL LTD | Thin Film CR;0201;1/20W;�50PPM;240R;�0.5% RoHS : Compliant | 0 | |||
 Wuhan P&S | VS-E5PH6012L-N3 | Vishay Intertechnologies | Hyperfast Rectifier, 60A,1200V RoHS : Compliant |
| 89,000 | |
NLV14012BDR2G | onsemi | RoHS : Compliant |
| 55,000 | ||
| VS-E5PH3012L-N3 | Vishay Intertechnologies | Hyperfast Rectifier, 30A FRED Pt G5 RoHS : Compliant |
| 31,325 | ||
| 10122655-101LF | Amphenol FCi | 10Row,120P,2mm,Right Angle Receptacle RoHS : Compliant |
| 31,320 | ||
| 10127850-001LF | Amphenol FCi | Headers & Wire Housings,IDC Terminal,SMT RoHS : Compliant |
| 15,000 | ||
| NTH4L012N065M3S | onsemi | SIC MOS TO247-4L 12MOHM 6 RoHS : Compliant |
| 10,350 | ||
| STBR6012W | STMicroelectronics | - RoHS : Compliant |
| 20 | ||
| 10124620-4444P00LF | Amphenol FCi | AirMax Power Connectors, Power Solutions, 2-Pair, 2 Column, 12-Position, Right Angle Receptacle, Press-Fit RoHS : Compliant |
| 20 | ||
| NOIX1SE012KBLFB-GEVB | onsemi | - |
| 1 | ||
| NOIX1SN012KBLFB-GEVB | onsemi | - |
| 1 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand