 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
041GFD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3041LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm SMB Plug to 75 Ohm SMB Plug Cable 24 Inch Length Using 75 Ohm RG59 Coax, RoHS., Radio frequency assembly 75 Ohm SMB plug to 75 Ohm SMB plug cable 24 inch length using 75 Ohm RG59 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm SMB plug to 75 Ohm SMB plug cable 24 inch length using 75 Ohm RG59 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3041LF-24, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3041LF-24 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug to 75 Ohm SMB plug cable 24 inch length using 75 Ohm RG59 coax, RoHS. |
| 480 | |
| PE3M0041-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 N Female Bulkhead to N Female Bulkhead Cable 36 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to N female bulkhead cable 36 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to N female bulkhead cable 36 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/03-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and M39012/03-0503 type N bulkhead cable connection on the other. Our M39012/03-0503 type N to M39012/03-0503 N type cable assemblies have a female gender on end 1 and female on end 2. This M39012/03-0503 N type to M39012/03-0503 type N cable is a female to female coax assembly, PE3M0041-36, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/03-0503 N type jack cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/03-0503 type N jack cable assembly PE3M0041-36 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 N type to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/03-0503 N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/03-0503 N type jack bulkhead to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/03-0503 type N cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to N female bulkhead cable 36 inch length using M17/84-RG223 coax. |
| 62 | ||
| PE3W04104-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Pasternack’s PE3W04104-12 low loss SMA male to type N female bulkhead RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to type N female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W04104-12 can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04104-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead type N female cable has a maximum VSWR of 1.4:1. This PE3W04104-12 SMA plug to type N jack cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04104-12 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 37 | ||
| PE3W04105-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W04105-24 can also be known as a low loss type N jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04105-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our bulkhead type N female to right angle SMA male cable has a maximum VSWR of 1.4:1. Type N jack to SMA plug cable assembly PE3W04105-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04105-24 can also be used in the other direction and will be a right angle SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 37 | ||
| PE3M0410-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Socket to MIL Size 8 Contact Socket Cable 36 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0410-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0410-36 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0410-36 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 12 | ||
| PE3C0410-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to Mini SMP Female Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to mini SMP female cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to mini SMP female cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a mini SMP cable connection on the other. Our SMA to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C0410-6 can also be known as a SMA plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0410-6 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our SMA male to Mini SMP female cable has a maximum VSWR of 1.4:1. SMA plug to mini SMP jack cable assembly PE3C0410-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C0410-6 can also be used in the other direction and will be a mini SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Mini SMP RF cable assembly as per your requirements. |
| 9 | ||
| PE3W04120 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using RG316-DS Coax. PE3W04120 is a MMCX plug right angle to reverse polarity SMA female bulkhead cable using RG316-DS coax. This Pasternack MMCX plug right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04120 MMCX plug right angle to SMA reverse polarity female bulkhead cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W04173/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm. HN Male Right Angle to HN Male Right Angle Cable Using RG217 Coax with HeatShrink. PE3W04173/HS is a HN male right angle to HN male right angle cable using RG217 coax. This Pasternack HN male right angle to HN male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm HN for connector 2. HN right angle to HN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male HN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04173/HS HN male right angle to HN male right angle cable assembly is constructed with RG217 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3W11041 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C0418 | Pasternack Enterprises | 0 | ||||
| PE3C0418LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm F Male to 75 Ohm F Male Cable Using 93 Ohm RG62 Coax with HeatShrink, LF Solder. PE3C0418LF/HS is a F male to F male cable using RG62 coax. This Pasternack F male to F male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm F for connector 2. Our male F to male F cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3C0418LF/HS F male to F male cable assembly is constructed with RG62 coax. | 0 | |||
| PE3C1041-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Male Right Angle to N Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC male right angle to N male low loss cable 48 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC male right angle to N male low loss cable 48 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and type N cable connection on the other. Our low loss right angle TNC to type N cable assemblies have a male gender on end 1 and male on end 2. This TNC to N type cable is a male to male coax assembly, PE3C1041-48, can also be known as a low loss right angle TNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3C1041-48 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041-48 can also be used in the other direction and will be type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male low loss cable 48 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C10418-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 24 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-24 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2041/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMP Female to SMP Female Cable Using PE-P086 Coax with HeatShrink. PE3C2041/HS is a SMP female to SMP female cable using PE-P086 coax. This Pasternack SMP female to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. Our female SMP to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2041/HS SMP female to SMP female cable assembly is constructed with PE-P086 coax. | 0 | |||
| PE3C10414-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male right angle low loss cable 12 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male right angle low loss cable 12 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10414-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10414-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10414-12 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the solder/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10414-12 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 0 | ||
 Venkel Ltd. | TFCR0402-16W-E-6041BT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;6.04K;�0.1% RoHS : Compliant | 90,000 | ||
| TFCR0402-16W-C-6041FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;6.04K;�1% RoHS : Compliant | 10,000 | |||
| HPTF0805-TE-6041CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;6.04K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UN-6041FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-TE-6041CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;6.04K;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF1206-TP-6041AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;6.04K;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UP-6041DT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;6.04K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VC-6041FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-6041BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;6.04K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-6041CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;6.04K;�0.25% RoHS : Compliant | 0 | |||
| MELFM0207-VE-6041FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;6.04K;�1% RoHS : Not Compliant | 0 | |||
| PWCR0805-VK-6041FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| PWCR2010-XK-6041FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-6041DT | VENKEL LTD | Chip Resistor;0805;1/10W;6.04K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1041BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;1.04K;�0.1% RoHS : Compliant | 0 | |||
 Wuhan P&S | G22041432709J2C000 | Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors RoHS : Compliant |
| 5,000 | |
| G22041431009J4C000 | Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors RoHS : Compliant |
| 1,000 | ||
IPP041N04NG | Infineon Technologies AG | 40V,80A,N Channel Power MOSFET RoHS : Compliant |
| 500 | ||
| 20020004-D041B01LF | Amphenol FCi | Terminal Blocks : Pluggable plug, contact up side, 3.81 mm pitch, 4 position RoHS : Compliant |
| 300 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand