| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Rutronik | 22272041
| Molex | 04P KK Pin Header 2.54mm STR FrictionL.
RoHS : Compliant | 1,425 : $0.2462
2,850 : $0.2417
4,275 : $0.2395
5,700 : $0.2373
7,125 : $0.2328
|
| 143,925
 |
22232041
| Molex | 04P KK Pin Header 2.54mm STR FrictionL.
RoHS : Compliant | 1,900 : $0.1074
3,800 : $0.1054
5,700 : $0.1045
7,600 : $0.1035
11,400 : $0.1015
|
| 28,950
|
204-10SYGD/S530-E2
| Everlight Electronics Co Ltd | 3MM SUPER YELLOW GREEN DIFFUSE
RoHS : Compliant | 1,000 : $0.0479
2,000 : $0.0369
4,000 : $0.0363
8,000 : $0.0363
16,000 : $0.0359
|
| 14,000
|
CR21-6041-FL
| ASJ Holdings Limited | RC0805 6,04K 1% 0,125W TK100
RoHS : Compliant | 5,000 : $0.0026
15,000 : $0.0026
25,000 : $0.0026
150,000 : $0.0025
300,000 : $0.0025
|
| 10,000
|
110-87-310-41-001101
| PRECI-DIP SSA | 10P DIL SOCKET 300 MIL
RoHS : Compliant | 41 : $0.2941
82 : $0.2888
123 : $0.2861
246 : $0.2835
369 : $0.2781
|
| 6,560
|
110-87-640-41-001101
| PRECI-DIP SSA | 40P DIL SOCKET 600 MIL
RoHS : Compliant | 10 : $2.32
30 : $2.28
60 : $2.25
120 : $2.23
280 : $2.2
|
| 5,370
|
110-87-320-41-001101
| PRECI-DIP SSA | 20P DIL SOCKET 300 MIL CONN
RoHS : Compliant | 20 : $0.5874
40 : $0.5767
80 : $0.5714
160 : $0.5661
300 : $0.5554
|
| 4,680
|
BZW04-15B
 | Diotec Semiconductor AG | TVS-DIODE BI 0,4KW 18V DO15
RoHS : Compliant | 4,000 : $0.0616
8,000 : $0.0616
12,000 : $0.0616
16,000 : $0.0616
|
| 4,000
|
0412CDMCCDS-1R0MC
| Sumida Corporation | 0412CDMCC 1,0uH 4,1 20%
RoHS : Compliant | 3,000 : $0.289
6,000 : $0.2604
12,000 : $0.258
18,000 : $0.2508
|
| 3,000
|
OQ0415510000G
| Amphenol Interconnect Products Inc | 04P Pluggable_Header 3.50mm Green
RoHS : Compliant | | 1,600
|
38212000410
| Littelfuse Inc | 2A 250V slow short pins IEC
RoHS : Compliant | 1,000 : $0.514
2,000 : $0.514
3,000 : $0.514
|
| 1,000
|
37000500410
| Littelfuse Inc | 0.05A 250V fast TR5 long pins IEC
RoHS : Compliant | | 1,000
|
EESX1041
| ARATAS | Photomicrosensor Transmissive
RoHS : Compliant | 400 : $1.09
800 : $1.0664
1,200 : $1.05
2,000 : $1.0373
2,400 : $1.015
|
| 800
|
S25FL064LABNFI041
| Infineon Technologies AG | SPI NOR Flash 64M x8 65nm USON8
RoHS : Compliant | 615 : $1.67
1,230 : $1.32
1,845 : $1.23
2,460 : $1.19
|
| 246
|
204-10SURD/S530-A3
| Everlight Electronics Co Ltd | 3MM RED DIFFUSE LEAD:14,6MM
RoHS : Compliant | 1,000 : $0.0413
3,000 : $0.0318
5,000 : $0.0312
9,000 : $0.0312
17,000 : $0.0309
|
| 47
|
DB Roberts | 1004-125-SS-20
| RAF Electronic Hardware | | 1 : $2.777
100 : $1.9514
135 : $1.9514
|
| 135
|
E5-1-041-041
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
 |
77-04-104-13
| Southco | | | 0
|
E5-2-041-041
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
304110041556
| Essentra Components | | | 0
|
R4-10-41-505-10
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
R4-90-4101-10
| Southco | | | 0
|
0BN10-03041
| Avdel | AVIBULB RIV 316 SN STSS | | 0
|
301308041152
| Essentra Components | | | 0
|
304512041152
| Essentra Components | | | 0
|
35HSP041
| Essentra Components | HEX SELF THREAD STANDOFF, 8 SC | | 0
|
308204041152
| Essentra Components | MALE TO FEMALE STANDOFF STEEL - ZINC | | 0
|
3404120702E
| Essentra Components | | | 0
|
12-11-304-12
| Southco | | | 0
|
12-11-404-11
| Southco | Get the functionality of a quicker screw fastening solution and the ease of more forgiving alignment for frequently accessed applications. These fasteners use a modified Acme thread to combine quick and easy engagement like a quarter-turn fastener pr | | 0
|
FDH Electronics | 10-417404-19H
| Amphenol Aerospace | Backshells & Ac | | 0
|
10-417404-17H
| Amphenol Aerospace | Backshells & Ac | | 0
|
M10-417404-159
| Amphenol Aerospace | Connector 38999 | | 0
|
10-417404-137
| Amphenol Aerospace | Backshells & Ac | | 0
|
10-417404-159
| Amphenol Aerospace | Backshells & Ac | | 0
|
M10-417404-179
| Amphenol Aerospace | Connector 38999 | | 0
|
10-417404-197
| Amphenol Aerospace | Backshells & Ac | | 0
|
3455R 04180041
| Honeywell Sensing and Control | Thermostat | 1 : $104.04
5 : $104.04
10 : $86.7
25 : $70.027
50 : $70.027
100 : $63.884
250 : $58.732
500 : $58.732
1,000 : $58.732
2,500 : $58.732
10,000 : $58.732
|
| 0
|
M10-417404-199
| Amphenol Aerospace | Connector 38999 | | 0
|
10-417404-11H
| Amphenol Aerospace | Backshells & Ac | | 0
|
10-417404-15H
| Amphenol Aerospace | Backshells & Ac | | 0
|
10-417404-199
| Amphenol Aerospace | Backshells & Ac | | 0
|
M10-417404-139
| Amphenol Aerospace | Connector 38999 | | 0
|
10-417404-179
| Amphenol Aerospace | Backshells & Ac | | 0
|
10-417404-177
| Amphenol Aerospace | Backshells & Ac | | 0
|
Flip Electronics | AT25SF041-SHD-T
| Dialog Semiconductor GmbH | Stock, Ship Today
RoHS : Compliant | | 224,048
|
CY7C1041G30-10BVJXIT
| Infineon Technologies AG | Stock | | 54,000
|
CY7C1041DV33-10BVIT
| Cypress Semiconductor | Stock
RoHS : Not Compliant | | 19,710
|
CY7C1041G30-10BAJXE
| Infineon Technologies AG | Stock, Ship Today
RoHS : Compliant | | 13,502
|
CY7C1041GN-10ZSXI
| Infineon Technologies AG | Stock, Ship Today
RoHS : Compliant | | 10,931
|
K32W041AK
| NXP Semiconductors | Stock
RoHS : Compliant | | 9,800
|
CY7S1041G30-10VXI
| Infineon Technologies AG | Stock, Ship Today
RoHS : Compliant | | 2,550
|
AT45DB041E-SHN-T
| Dialog Semiconductor GmbH | Stock, Ship Today
RoHS : Compliant | | 2,000
|
CY7C1041CV33-10VXC
 | Cypress Semiconductor | Stock
RoHS : Compliant | | 1,840
|
CY7C1041DV33-10VXI
| Infineon Technologies AG | Stock, Ship Today | | 1,840
|
P3041NSE7MMC
| NXP Semiconductors | Stock
RoHS : Compliant | | 712
|
P3041NXE7MMC
| NXP Semiconductors | Stock, Ship Today
RoHS : Compliant | | 712
|
FCH041N65EF-F155
| onsemi | Stock, Ship Today
RoHS : Compliant | | 510
|
CY7C1041GN30-10VXI
| Infineon Technologies AG | Stock, Ship Today
RoHS : Compliant | | 403
|
MSP17LV041-E1-TH-001
| Infineon Technologies AG | Stock, Ship Today | | 71
|
Pasternack Enterprises US | PE3W04183/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to N Female 4 Hole Flange Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female 4 hole flange low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N female 4 hole flange low loss cable 24 inch length using LMR-195 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and N type 4 hole flange cable connection on the other. Our low loss reverse polarity SMA to type N cable assemblies have a plug gender on end 1 and female on end 2. PE3W04183/HS-24 can also be known as a low loss reverse polarity SMA male to type N jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to N type jack cable assembly PE3W04183/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA plug to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04183/HS-24 can also be used in the other direction and will be type N female 4 hole flange to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to N type jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N female 4 hole flange low loss cable 24 inch length using LMR-195 coax with heatshrink. | 1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99
|
| 765
|
PE3041-72
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm SMB Plug to 75 Ohm SMB Plug Cable 72 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm SMB plug to 75 Ohm SMB plug cable 72 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm SMB plug to 75 Ohm SMB plug cable 72 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3041-72, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3041-72 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug to 75 Ohm SMB plug cable 72 inch length using 75 Ohm RG59 coax. | 1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1
|
| 480
|
PE3W04161-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMB Plug to N Female Cable 200 cm Length Using RG141 Coax., Radio frequency assembly SMB plug to N female cable 200 cm length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to N female cable 200 cm length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and N type cable connection on the other. Our SMB to type N cable assemblies have a plug gender on end 1 and female on end 2. This SMB to type N cable is a plug to female coax assembly, PE3W04161-200CM, can also be known as a SMB male to type N jack cable assembly and will be shipped same-day as it is purchased. SMB male to N type jack cable assembly PE3W04161-200CM is built with RG141 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMB plug to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04161-200CM can also be used in the other direction and will be type N female to SMB plug cable assembly if the opposite connectivity is required. SMB male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to N female cable 200 cm length using RG141 coax. | 1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
|
| 344
|
PE3W09204-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Jack Bulkhead to SHV Plug Cable 12 Inch Length Using RG8 Coax., Radio frequency assembly SHV jack bulkhead to SHV plug cable 12 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV plug cable 12 inch length using RG8 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and plug on end 2. PE3W09204-12 can also be known as a SHV female to SHV male cable assembly and will be shipped same-day as it is purchased. SHV female to SHV male cable assembly PE3W09204-12 is built with RG8 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09204-12 can also be used in the other direction and will be SHV plug to SHV jack bulkhead cable assembly if the opposite connectivity is required. SHV female bulkhead to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV plug cable 12 inch length using RG8 coax. | 1 : $258.99
25 : $246.04
50 : $233.09
100 : $222.73
|
| 73
|
PE3W04104-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Pasternack’s PE3W04104-12 low loss SMA male to type N female bulkhead RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to type N female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W04104-12 can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04104-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead type N female cable has a maximum VSWR of 1.4:1. This PE3W04104-12 SMA plug to type N jack cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04104-12 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69
|
| 37
|
PE3W04159/HS-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly BNC male to BNC male right angle low loss cable 12 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male right angle low loss cable 12 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04159/HS-12 can also be known as a low loss BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W04159/HS-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04159/HS-12 can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle low loss cable 12 inch length using LMR-240-DB coax with heatshrink. | 1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47
|
| 1
|
PE3C0041/HS
| Pasternack Enterprises | | | 0
|
PE3C10414-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male right angle low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male right angle low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10414-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10414-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10414-24 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the solder/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10414-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 1 : $134.99
25 : $129.59
50 : $125.54
100 : $122.84
|
| 0
|
PE3C2604-150CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male Right Angle to TNC Female Bulkhead Cable 150 CM Length Using PE-SR402AL Coax., Radio frequency assembly SMA male right angle to TNC female bulkhead cable 150 cm length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC female bulkhead cable 150 cm length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and TNC bulkhead cable connection on the other. Our right angle SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to TNC cable is a male to female coax assembly, PE3C2604-150CM, can also be known as a right angle SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE3C2604-150CM is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2604-150CM can also be used in the other direction and will be TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC female bulkhead cable 150 cm length using PE-SR402AL coax. | 1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27
|
| 0
|
PE3M0419-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Socket Cable 24 Inch Length Using PE-P141 Coax with Heat Shrink, LF Solder. The PE3M0419-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0419-24 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our BMA pin to BMA socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0419-24 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA socket cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0419-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. | 1 : $280.99
10 : $269.75
25 : $258.51
100 : $247.27
|
| 0
|
PE3W04135
| Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Banana Plug to BNC Male Cable Using RG142 Coax. PE3W04135 is a Banana plug to BNC male cable using RG142 coax. This Pasternack Banana plug to BNC male cable assembly uses a Banana for connector 1 and a 50 Ohm BNC for connector 2. Our plug Banana to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04135 Banana plug to BNC male cable assembly is constructed with RG142 coax. | | 0
|
PE3W04158LF-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 48 Inch Length Using RG58 Coax, LF Solder., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 48 inch length using RG58 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 48 inch length using RG58 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W04158LF-48 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04158LF-48 RF cable has a PVC (NC) jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3W04158LF-48 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 0
|
PE3W04159-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to BNC Male Low Loss Cable 12 Inch Length Using LMR-240-DB Coax., Radio frequency assembly BNC male right angle to BNC male low loss cable 12 inch length using LMR-240-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male low loss cable 12 inch length using LMR-240-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle BNC cable connection on one end and BNC cable connection on the other. Our low loss right angle BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04159-12 can also be known as a low loss right angle BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W04159-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04159-12 can also be used in the other direction and will be BNC male to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male low loss cable 12 inch length using LMR-240-DB coax. | 1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31
|
| 0
|
PE3W04186LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Plug Cable Using LMR-100 Coax, LF Solder. PE3W04186LF is a SMA female bulkhead to MMCX plug cable using LMR-100A coax. This Pasternack SMA female bulkhead to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA bulkhead to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04186LF SMA female bulkhead to MMCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W20416
| Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax. PE3W20416 is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
Wuhan P&S | G22041432709J2C000
| Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors
RoHS : Compliant | 1 : $4.23
100 : $1.41
500 : $1.31
1,000 : $1.27
|
| 5,000
|
G22041431009J4C000
| Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors
RoHS : Compliant | 1 : $4.23
100 : $1.41
500 : $1.31
1,000 : $1.27
|
| 1,000
|
IPP041N04NG
 | Infineon Technologies AG | 40V,80A,N Channel Power MOSFET
RoHS : Compliant | 1 : $0.77
100 : $0.64
500 : $0.57
1,000 : $0.55
|
| 500
|
20020004-D041B01LF
| Amphenol FCi | Terminal Blocks : Pluggable plug, contact up side, 3.81 mm pitch, 4 position
RoHS : Compliant | 1 : $1.09
100 : $1.04
500 : $0.91
1,000 : $0.88
|
| 300
|
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand