| Electronic Components Datasheet Search |
|
054HT-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | IAUCN04S7N054HATMA1 | Infineon Technologies AG | MOSFET_(20V 40V) |
| 5,000 | |
| IAUCN04S7N054HATMA1 | Infineon Technologies AG | MOSFET_(20V 40V) |
| 5,000 | ||
| LTC2054HVIS5#TRPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 4,254 | ||
| LTC2054HVIS5#TRPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 4,254 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 3,222 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 3,222 | ||
| LTC2054HVCS5#TRPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 2,776 | ||
PJ-054H![]() | Same Sky | CONN PWR JACK 1.7X4MM SOLDER |
| 1,000 | ||
| LTC2054HVHS5#TRPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 890 | ||
| LTC2054HVHS5#TRPBF | Analog Devices Inc | IC OP AMP 1CH TSOT-23-5 RoHS : Compliant |
| 890 | ||
| MSO5054HD | UNI-T | 500MHz 4Ch MSO High Definition |
| 19 | ||
| MSO5054HD | UNI-T | 500MHz 12-bit 5GSa/s 4 Ch |
| 2 | ||
| WAVESURFER 4054HD PROMO2 | Teledyne Lecroy | TELEDYNE LECROY, FULLY LOADED 50 |
| 2 | ||
| WAVESURFER 4054HD | Teledyne Lecroy | OSCOPE 12.1" 500MHZ 4CH 12BIT HD |
| 1 | ||
| WAVESURFER 4054HD-PROMO-1 | Teledyne Lecroy | 500 MHZ, 5 GS/S, 4 CH, 25 MPTS/C |
| 1 | ||
![]() Avnet Americas | ZML-140-54-H-D-685-SM | Samtec Inc | - Rail/Tube (Alt: ZML-140-54-H-D-685-SM) RoHS : Compliant |
| 1 | |
| M39003/09-4054H | Vishay Intertechnologies | Tantalum Capacitor, 22 uF, 35 V, ? 10%, Axial Leaded, 0.16 Ohm, 2.1 A, D, 7.34 mm, 17.42 mm - Bulk (Alt: M39003/09-4054H) RoHS : Not Compliant |
| 0 | ||
| SGM2054HXTD10G/TR | SG Micro Corp | - Tape and Reel (Alt: SGM2054HXTD10G/TR) RoHS : Not Compliant |
| 0 | ||
| HTMS-110-54-H-D | Samtec Inc | - Bulk (Alt: HTMS-110-54-H-D) RoHS : Compliant | 0 | |||
| D1U74T-W-3200-54-HB3C | Murata Manufacturing Co Ltd | POWERM HP HP-FEP MPSFEH - Boxed Product (Development Kits) (Alt: D1U74T-W-3200-54-HB3C) |
| 0 | ||
| ZML-140-54-H-D-555-SM | Samtec Inc | .050" x .100"" Micro Shrouded Terminal Strip" - Rail/Tube (Alt: ZML-140-54-H-D-555-SM) RoHS : Compliant | 0 | |||
| D1U74T-W-3200-54-HB4C | Murata Manufacturing Co Ltd | MURD1U74T-W-3200-54-HB4C AC/DC CONVERTER - Boxed Product (Development Kits) (Alt: D1U74T-W-3200-54-HB4C) |
| 0 | ||
| M39003/09-3054H | Vishay Intertechnologies | Tantalum Capacitor, 22 uF, 35 V, ? 10%, Axial Leaded, 0.16 Ohm, 2.1 A, C, 7.34 mm, 17.42 mm - Bulk (Alt: M39003/09-3054H) RoHS : Not Compliant |
| 0 | ||
| FTR-140-54-H-D-LC | Samtec Inc | - Rail/Tube (Alt: FTR-140-54-H-D-LC) RoHS : Compliant |
| 0 | ||
| IPS4054HK | STMicroelectronics | AUTO HIGH-SIDE SWITCH AND EFUSE - Tape and Reel (Alt: IPS4054HK) RoHS : Not Compliant |
| 0 | ||
| IAUCN04S7N054HATMA1 | Infineon Technologies AG | MOSFET - Tape and Reel (Alt: IAUCN04S7N054HATMA1) RoHS : Compliant |
| 0 | ||
| ZML-110-54-H-D-685-SM | Samtec Inc | - Rail/Tube (Alt: ZML-110-54-H-D-685-SM) RoHS : Compliant |
| 0 | ||
| TMS-120-54-H-D | Samtec Inc | - Bulk (Alt: TMS-120-54-H-D) RoHS : Compliant | 0 | |||
| M39003/03-3054H | Vishay Intertechnologies | Tantalum Capacitor, 56 uF, 20 V, ? 10%, Axial Leaded, C, 7.34 mm, 17.42 mm - Bulk (Alt: M39003/03-3054H) RoHS : Not Compliant |
| 0 | ||
| M39003/01-3054/HSD | Vishay Intertechnologies | Tantalum Capacitor, 0.056 uF, 50 V, ? 10%, Axial Leaded, S, 3.43 mm, 7.26 mm - Custom Tape W/Leader (Alt: M39003/01-3054/HSD) RoHS : Not Compliant |
| 0 | ||
![]() Newark | SRV05-4HTG-D | Littelfuse Inc | ESD PROTECTION DEVICE, 6V, SOT-23; RoHS : Compliant |
| 35,946 | |
| SRV05-4HTG-D | Littelfuse Inc | ESD PROTECTION DEVICE, 6V, SOT-23; RoHS : Compliant |
| 35,946 | ||
| SRV05-4HTG-D | Littelfuse Inc | ESD PROTECTION DEVICE, 6V, SOT-23; RoHS : Compliant |
| 3,081 | ||
| SRV05-4HTG-D | Littelfuse Inc | ESD PROTECTION DEVICE, 6V, SOT-23; RoHS : Compliant |
| 3,081 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, 0 TO 70DEG C, TSOT-23-5; RoHS : Compliant |
| 873 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, 0 TO 70DEG C, TSOT-23-5; RoHS : Compliant |
| 873 | ||
| LTC2054HS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 125DEG C, TSOT-23; RoHS : Compliant |
| 323 | ||
| LTC2054HS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 125DEG C, TSOT-23; RoHS : Compliant |
| 323 | ||
| LTC2054HVIS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 85DEG C, TSOT-23; RoHS : Compliant |
| 306 | ||
| LTC2054HVIS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 85DEG C, TSOT-23; RoHS : Compliant |
| 306 | ||
| LTC2054HVHS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 125DEG C, TSOT-23; RoHS : Compliant |
| 235 | ||
| LTC2054HVHS5#TRMPBF | Analog Devices Inc | OP-AMP, 500KHZ, -40 TO 125DEG C, TSOT-23; RoHS : Compliant |
| 235 | ||
| 20460054H | Betaduct Ltd | CLOSED SLOT DUCT, PC/ABS, GRY, 75X50MM; RoHS : Compliant |
| 3 | ||
| 20476054H | Betaduct Ltd | NARROW SLOT DUCT, NORYL, BLUE, 79X55MM; RoHS : Compliant |
| 1 | ||
| WAVESURFER 4054HD PROMO1 | Teledyne Lecroy | DSO, 4 CHANNEL, 500MHZ, 12.5MPTS, 5GSPS; Product Range:WaveSurfer 4000HD Series; Scope Channels:4 Analog; Bandwidth:500MHz; Sampling Rate:5GSPS; Display Memory Depth:12.5 Mpts; Calculated Rise Time:700ps; Plug Type:- RoHS Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | LTC2054HVHS5#TRPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 2,678 | |
| LTC2054HVMPS5#TRPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 2,500 | ||
| LTC2054HVCS5#TRPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 2,500 | ||
| LTC2054HVHS5#TRMPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 2,133 | ||
| LTC2054HVMPS5#TRMPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 1,330 | ||
| LTC2054HS5#TRMPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 793 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 645 | ||
| LTC2054HVIS5#TRMPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 612 | ||
| LTC2054HS5#TRPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 516 | ||
| LTC2054HVIS5#TRPBF | Analog Devices Inc | 1x uP Zero-Drift Op Amps RoHS : Compliant |
| 287 | ||
![]() RS | SRV05-4HTG (7931986P) | Littelfuse Inc | TVS DIODE ARRAY, QUAD UNI-DIRECTIONAL, 150W, 6-PIN SOT-23, SRV05 SERIES |
| 7,061 | |
| 1814935 (PTSM 0 5/ 4-HH0-2 5-SMD WH R32) | Phoenix Contact | PLUGGABLE HEADER 2.5MM 20AWG 160V 6A 4 POSITION COMBICON PTSM SERIES |
| 600 | ||
| 1778780 (PTSM 0 5/ 4-HH-2 5-SMD R32) | Phoenix Contact | PLUGGABLE HEADER 2.5MM 20AWG 160V 6A 4 POSITION COMBICON PTSM SERIES |
| 26 | ||
| HVB-054/HVP0 | PBC Linear | AXIAL BEARING W/WELDED FLANGE PLATE, FIXED, 1.15 US TON-FORCE, HVB SERIES |
| 3 | ||
| 2453397 (25533054) (HCI807507001-010RS) | RS Pro | 3/4-10 X 7 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, COARSE |
| 2 | ||
| 01079-054 (H25D-F62-SS-12GC-28V/V-CW-SM14/19) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL,5-28VDC,3/8" SHAFT |
| 1 | ||
| FO-310.5-4HD | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F] |
| 0 | ||
| FOD-700.5-4H | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F] |
| 0 | ||
| FO-020.5-4HD | Bimba Manufacturing Company | CYLINDER, FLAT-I, DBL ACT, SGL ROD, 9/16IN BORE ; STROKE: 0.5 INCH(S); SCREW C |
| 0 | ||
| FO-500.5-4HD | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); THREADED MOUNTING HOLES, REAR [3R] |
| 0 | ||
| FO-090.5-4HDL | Bimba Manufacturing Company | CYLINDER, FLAT-I, DBL ACT, SGL ROD, 1-1/16IN BORE ; STROKE: 0.5 INCH(S); SCREW |
| 0 | ||
| FOD-1250.5-4HNTV | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F] |
| 0 | ||
| T3DSO3054HD PROMO1 | Teledyne Lecroy | MSO, 500 MHZ, 4 GS/S INTERLEAVED, 4 CH, 400 MPTS/CH INTERLEAVED, FULLY LOADED |
| 0 | ||
| 1778641 (PTSM 0 5/ 4-HH-2 5-THR R32) | Phoenix Contact | PLUGGABLE HEADER 2.5MM 20AWG 160V 6A 4 POSITION COMBICON PTSM SERIES |
| 0 | ||
| 1411054 (HC-HPR-B16-SHFH-2SSM32-EMR-BK) | Phoenix Contact | CONNECTOR HOUSING;BASE BOX MOUNT;SIDE ENTRY;B16;SCREW LOCKS ON HOOD |
| 0 | ||
![]() TME | SRV05-4HTG-D | Littelfuse Inc | Diode: TVS array; 8.5V; 10A; 150W; unidirectional; ESD; SOT23-6 RoHS : Compliant |
| 221 | |
| AQRV05-4HTG | Littelfuse Inc | Diode: TVS array; 6V; 0.18kW; unidirectional; ESD; SOT23-6; Ch: 4 RoHS : Compliant |
| 0 | ||
PJ-054H![]() | Same Sky | Connector: DC supply; socket; female; 5A; 24V; PIN: 2; horizontal |
| 0 | ||
| MSO3054HD | Uni-Tran Semiconductor Corp | Oscilloscope: digital; Ch: 4; 500MHz; 2,5Gsps; 500Mpts; ≤800ps |
| 0 | ||
![]() ComSIT USA | SRV054HTG | Littelfuse Inc | AVAILABLE EU | 8,499 | ||
| SRV054HTGD | Littelfuse Inc | AVAILABLE EU | 3,773 | |||
![]() Interstate Connecting Components | 630B007NF054H | Glenair Inc | 0 | |||
| 443AS009MT1405-4HK | Glenair Inc | 0 | ||||
| 630A007NF054H | Glenair Inc | RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | 105-4HWM250 | HellermannTyton |
| 0 | ||
| 105-4HW8 | HellermannTyton |
| 0 | |||
| 1105-4HW24 | HellermannTyton |
| 0 | |||
| 1105-4HWM250 | HellermannTyton |
| 0 | |||
| 105-4H | HellermannTyton |
| 0 | |||
| 1105-4HW8 | HellermannTyton |
| 0 | |||
| 1805-4-H-W24 | HellermannTyton |
| 0 | |||
| 105-4HW24 | HellermannTyton |
| 0 | |||
| 1805-4-H | HellermannTyton |
| 0 | |||
| 105-4HW21 | HellermannTyton |
| 0 | |||
| 1105-4H | HellermannTyton |
| 0 | |||
| 1805-4-H-W8 | HellermannTyton |
| 0 | |||
| 1805-4-H-WM250 | HellermannTyton |
| 0 | |||
| 1805-4-H-W21 | HellermannTyton |
| 0 | |||
![]() PUI | 2012-1X12G00S/028/054/H | 100 | ||||
![]() Richardson RFPD | LTC2054HS5#TRMPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P 6V 5-Pin T RoHS : Compliant |
| 0 | |
| LTC2054HS5#TRPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P 6V 5-Pin T RoHS : Compliant |
| 0 | ||
| LTC2054HVCS5#TRPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVMPS5#TRPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVHS5#TRPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVIS5#TRPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVHS5#TRMPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVMPS5#TRMPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
| LTC2054HVIS5#TRMPBF | Analog Devices Inc | Op Amp Single Auto Zero/Chopper R-R O/P ±5.5V/11V RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | LTC2054HVCS5#TRPBF | Analog Devices Inc | INSTOCK RoHS : Compliant | 5,000 | ||
| LTC2054HVCS5#TRMPBF | Analog Devices Inc | INSTOCK RoHS : Compliant | 5,000 | |||
| SRV05-4HTG-D | Littelfuse Inc | INSTOCK RoHS : Compliant | 5 | |||
![]() Avnet Abacus | D1U4-W-1600-54-HB3C | Murata Manufacturing Co Ltd | ACDC Power Supply SingleOUT 54V 30A 1600W (Alt: D1U4-W-1600-54-HB3C) RoHS : Compliant | 0 | ||
| D1U4-W-1600-54-HB4C | Murata Manufacturing Co Ltd | ACDC Power Supply SingleOUT 54V 30A 1600W (Alt: D1U4-W-1600-54-HB4C) RoHS : Compliant | 0 | |||
| D1U4-W-1600-54-HB4MC | Murata Manufacturing Co Ltd | ACDC Power Supply (Alt: D1U4-W-1600-54-HB4MC) RoHS : Compliant | 0 | |||
| D1U4-W-1600-54-HB3MC | Murata Manufacturing Co Ltd | CDTD1U4W160054HB3MC (Alt: D1U4-W-1600-54-HB3MC) RoHS : Compliant | 0 | |||
| D1U74T-W-3200-54-HB3C | Murata Manufacturing Co Ltd | POWERM HP HPFEP MPSFEH (Alt: D1U74T-W-3200-54-HB3C) RoHS : Compliant | 0 | |||
| D1U74T-W-3200-54-HB4C | Murata Manufacturing Co Ltd | MURD1U74TW320054HB4C ACDC CONVERTER (Alt: D1U74T-W-3200-54-HB4C) RoHS : Compliant | 0 | |||
| D1U4CS-D-2100-54-HA3DC | Murata Manufacturing Co Ltd | DCDC Power Supply SingleOUT 54V 40A 2100W (Alt: D1U4CS-D-2100-54-HA3DC) RoHS : Compliant | 0 | |||
![]() Avnet Asia | D1U74T-W-3200-54-HB4C | Murata Manufacturing Co Ltd | MURD1U74T-W-3200-54-HB4C AC/DC CONVERTER (Alt: D1U74T-W-3200-54-HB4C) RoHS : Compliant | 5 | ||
![]() EBV Elektronik | IAUCN04S7N054HATMA1 | Infineon Technologies AG | (Alt: SP006005280) RoHS : Compliant | 0 | ||
![]() FDH Electronics | 105-4-H-W8 | HellermannTyton | Heat Shrink Prd | 0 | ||
![]() Maritex | SRV05-4HTG-D | Littelfuse Inc | TVS Diodes & ESD Suppressors; SRV05-4HTG-D; LITTELFUSE RoHS : Compliant |
| 33,059 | |
![]() Master Electronics | 054HCC250G-220C | Klixon | Sensata Technologies RoHS : Compliant |
| 25 | |
| PTSM054HH25SMDWHR32 | Phoenix Contact | Pluggable Terminal Blocks PTSM 0 5/ 4-HH- 2 5- SMD WH R32 RoHS : Compliant |
| 0 | ||
| HTMS-110-54-H-S | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| HTMS-150-54-H-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| C-105-4-HD | Thomas & Betts | Pipe Strap - 11 Gauge - 4 Inch Pipe Size - Steel - Hot-Dipped Galvanized Finish RoHS : Compliant |
| 0 | ||
| HTMS-110-54-H-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| PTSM054HHI25SMDWHR44 | Phoenix Contact | RoHS : Compliant |
| 0 | ||
| FTR-140-54-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTMS-130-54-H-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| FTR-120-54-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZML-140-54-H-D-685-SM | Samtec Inc | .050 X .100 MICRO SH RoHS : Compliant |
| 0 | ||
| FTR-110-54-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FTR-140-54-H-D-LC | Samtec Inc | SURFACE MOUNT MICRO HEADE RoHS : Compliant |
| 0 | ||
| HTMS-140-54-H-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| ZML-110-54-H-D-685-SM | Samtec Inc | .050 X .100 MICRO SH RoHS : Compliant |
| 0 | ||
![]() Neutron USA | XGS2220-54HP | Zyxel Communications Corporation | XGS2220-54HP |
| 4 | |
![]() Pasternack Enterprises US | PE3C0054/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0054/HS can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0054/HS RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C0054/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 35,190 | ||
| PE3C0054/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0054/HS-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0054/HS-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C0054/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 7,676 | ||
| PE3C0054/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0054/HS-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0054/HS-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C0054/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 7,676 | ||
| PE3C0054/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0054/HS-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0054/HS-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C0054/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 6,758 | ||
| PE3C0054/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0054/HS-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0054/HS-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C0054/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 5,404 | ||
| PE37054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W09054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to SSMC Plug Cable Using RG174 Coax with HeatShrink. PE3W09054/HS is a N male right angle to SSMC plug cable using RG174 coax. This Pasternack N male right angle to SSMC plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SSMC for connector 2. N right angle to SSMC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09054/HS N male right angle to SSMC plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W02054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to BNC Male Cable Using PE-SR405AL Coax with HeatShrink. PE3W02054/HS is a MMCX plug right angle to BNC male cable using PE-SR405AL coax. This Pasternack MMCX plug right angle to BNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BNC for connector 2. MMCX right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W02054/HS MMCX plug right angle to BNC male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W07054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-195 Coax with HeatShrink. PE3W07054/HS is a N male to N male cable using LMR-195 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07054/HS N male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1054/HS | Pasternack Enterprises | 0 | ||||
| PE3C10054/HS | Pasternack Enterprises | 0 | ||||
| PE3W01054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. MMCX Plug to MMCX Plug Cable Using PE-SR405AL Coax with HeatShrink. PE3W01054/HS is a MMCX plug to MMCX plug cable using PE-SR405AL coax. This Pasternack MMCX plug to MMCX plug cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. Our plug MMCX to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01054/HS MMCX plug to MMCX plug cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W11054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W12054/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMC Plug Right Angle Cable Using RG58 Coax with HeatShrink. PE3W12054/HS is a BNC male right angle to SMC plug right angle cable using RG58 coax. This Pasternack BNC male right angle to SMC plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. BNC right angle to SMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to plug SMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12054/HS BNC male right angle to SMC plug right angle cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C6054/HS | Pasternack Enterprises | 0 | ||||
![]() Sager | D1U74T-W-3200-54-HB3C | Murata Power Solutions | Power Supplies - Chassis Mount 54V 3.2KW |
| 15 | |
| HTMS-110-54-H-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTMS-150-54-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 054HCC250G-220C | Sensata Technologies | Sensata Technologies | 0 | |||
| HTMS-110-54-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 054HCB221B-201B | Sensata Technologies | Sensata Technologies | 0 | |||
| C1054HD | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| D2U5T-H3-7000-54-HU4C | Murata Power Solutions | Switching Power Supplies AC/DC 7000W 96% EFF 54V 3.3 OR | 0 | |||
| 3054H | Hubbell Incorporated | Hubbell | 0 | |||
| HTMS-130-54-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| D1U74T-W-3200-54-HB4C | Murata Power Solutions | Power Supplies - Chassis Mount 54V 3.2KW |
| 0 | ||
| ZML-140-54-H-D-685-SM | Samtec Inc | .050 X .100 MICRO SHROUDED TERMINAL STRIP RoHS : Compliant |
| 0 | ||
| FTR-140-54-H-D-LC | Samtec Inc | Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HTMS-140-54-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| D1U4-W-1600-54-HB4C | Murata Power Solutions | Rack Mount Power Supplies | 0 | |||
![]() Vyrian | LTC2054HVHS5-TRMPBF | Analog Devices Inc | 12,095 | |||
| LTC2054HVIS5 | Analog Devices Inc | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 11,918 | |||
| LTC2054HVHS5#TRM | Analog Devices Inc | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 11,914 | |||
| LTC2054HS5#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 11,121 | |||
| LTC2054HS5 | Analog Devices Inc | Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 11,081 | |||
| LTC2054HS5#TRMPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 9,931 | |||
| LTC2054HVHS5 | Analog Devices Inc | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 9,770 | |||
| LTC2054HVHS5-TRPBF | Analog Devices Inc | 8,811 | ||||
| LTC2054HS5#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 8,796 | |||
| LTC2054HVIS5#TRM | Analog Devices Inc | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 8,782 | |||
| LTC2054HS5#TRM | Analog Devices Inc | Operational Amplifier, 1 Func, 3uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 7,152 | |||
| LTC2054HVIS5-TRMPBF | Analog Devices Inc | 6,746 | ||||
| LTC2054HVCS5#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 5,593 | |||
LTC2054HVIS5#PBF![]() | Linear Technology | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 582 | |||
LTC2054HVHS5#PBF![]() | Linear Technology | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 238 | |||
![]() Win Source Electronics | SRV05-4HTG-D | Littelfuse Inc | TVS DIODE 6VWM 15VC SOT23-6 RoHS : Compliant |
| 215,468 | |
LTC2054HVIS5![]() | Linear Technology | Low Power Zero-Drift Operational Amplifiers RoHS : Not Compliant |
| 10,051 | ||
LTC2054HVIS5#TRMPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 9,440 | ||
| LTC2054HVIS5#TRM | Analog Devices Inc | IC OPAMP CHOPPER 1 CIRC TSOT23-5 RoHS : Not Compliant |
| 9,130 | ||
LTC2054HVIS5#TRPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 9,120 | ||
LTC2054HVHS5![]() | Linear Technology | Single/Dual Micropower Zero-Drift Operational Amplifiers RoHS : Not Compliant |
| 6,000 | ||
LTC2054HVCS5![]() | Linear Technology | Low Power Zero-Drift Operational Amplifiers RoHS : Not Compliant |
| 6,000 | ||
LTC2054HVHS5#TRMPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 5,720 | ||
LTC2054HVHS5#TRPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 5,550 | ||
LTC2054HVCS5#TRPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 5,510 | ||
LTC2054HVCS5#TRMPBF![]() | Linear Technology | IC OPAMP CHOPPER 500KHZ TSOT23-5 RoHS : Compliant |
| 5,500 | ||
| SRV05-4HTG | Littelfuse Inc | TVS DIODE 6VWM 15VC SOT23-6 RoHS : Compliant |
| 2,950 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |