| Electronic Components Datasheet Search |
|
060L-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Coilcraft Direct | CST2-060LC | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 342 | |
| CST1-060LC | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 339 | ||
| HP4-0060LD | Coilcraft Inc | Hexa-Path configurable magnetics, high current, SMT, RoHS RoHS : Compliant |
| 193 | ||
| HPH4-0060LD | Coilcraft Inc | Hexa-Path configurable magnetics, high inductance, SMT, RoHS RoHS : Compliant |
| 129 | ||
| CST2010-060LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 0 | ||
| CST1-060LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | HMC1060LP3E | Analog Devices Inc | AVAILABLE EU RoHS : Compliant | 150 | ||
![]() ComSIT USA | SMBF1060LT1G | onsemi | Electronic Component RoHS : Compliant | 24,000 | ||
| HCPL060L500E | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 4,380 | |||
| HCPL060L500 | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 1,500 | |||
| HCPL060L560E | Avago Technologies | HIGH SPEED LVTTL COMPATIBLE 3.3 VOLT OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 1,170 | |||
| FOD060L | Fairchild Semiconductor Corporation | LVTTL/LVCMOS 3.3 V HIGH SPEED-10 MBIT/S LOGIC GATE OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 10MBps RoHS : Compliant | 750 | |||
| HCPL060L000E | Avago Technologies | Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 15MBps RoHS : Compliant | 700 | |||
![]() Interstate Connecting Components | 10162695-107060LF | Amphenol FCi | CA HSG FOR COMBOLOCK WTB-WHITE | 0 | ||
| 51939-060LF | Amphenol FCi | PWRBLADE RAH-51939-060LF RoHS : Compliant | 0 | |||
| 86303425060LF | Amphenol FCi | RoHS : Compliant |
| 0 | ||
| 71600-060LF | Amphenol FCi | QKE III FEM CONN GP RoHS : Compliant |
| 0 | ||
| 71918-060LF | Amphenol FCi | QUICKIE-71918-060LF RoHS : Compliant | 0 | |||
| 10164367-0060LF | Amphenol FCi | 1.0MM PITCH, RECEPTACLE,-ACTIV | 0 | |||
![]() Chip 1 Exchange | NFAP1060L3TT | onsemi | INSTOCK RoHS : Compliant | 2,080 | ||
| DFC32R14P060LHA-TA2030 | Murata Manufacturing Co Ltd | INSTOCK | 1,185 | |||
| BMB2A0060LN2 | TE Connectivity | INSTOCK RoHS : Compliant | 15 | |||
![]() Avnet Abacus | LSEM-130-06.0-L-DV-A-N-K-TR | Samtec Inc | (Alt: LSEM-130-06.0-L-DV-A-N-K-TR) RoHS : Compliant | 2,400 | ||
| LSHM-120-06.0-L-DV-A-S-K-TR | Samtec Inc | (Alt: LSHM-120-06.0-L-DV-A-S-K-TR) RoHS : Compliant | 170 | |||
| 863001060LF | Amphenol Corporation | (Alt: 863001060LF) RoHS : Compliant | 0 | |||
| PTH12060LAD | Advanced Energy Industries Inc | Non Isolated Board Mount DCDC Converter POLA DIP 55 W 800 mV 18 V 10 A 108 V 132 V (Alt: PTH12060LAD) RoHS : Compliant | 0 | |||
| PTH12060LAZT | Advanced Energy Industries Inc | Non Isolated Board Mount DCDC Converter POLA Surface Mount DIP 55 W 800 mV 18 V 10 A - Tape and Reel (Alt: PTH12060LAZT) RoHS : Compliant | 0 | |||
| 0538-002-F-15.0-60LF | CTS Corporation | Cap Trimmer Ceramic 1560pF 200V Top Adj 125C (Alt: 0538-002-F-15.0-60LF) RoHS : Compliant | 0 | |||
| ARC6-08-06.0-LU-LU-3-1 | Samtec Inc | (Alt: ARC6-08-06.0-LU-LU-3-1) RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-10-2-A-K-TR | Samtec Inc | (Alt: SEAF-20-06.0-L-10-2-A-K-TR) RoHS : Compliant | 0 | |||
| SEAF-10-06.0-L-04-2-A-K-FR | Samtec Inc | Mezzanine Connector High Density Array Female 127 mm 4 Rows 40 Contacts Straight Solder (Alt: SEAF-10-06.0-L-04-2-A-K-FR) RoHS : Compliant | 0 | |||
| SEAF-20-06.0-L-06-1-A-K-TR | Samtec Inc | (Alt: SEAF-20-06.0-L-06-1-A-K-TR) RoHS : Not Compliant | 0 | |||
| SEAF-20-06.0-L-10-1-A-K-TR | Samtec Inc | Mezzanine Connector High Density Array Female 127 mm 10 Rows 200 Contacts Straight Solder (Alt: SEAF-20-06.0-L-10-1-A-K-TR) RoHS : Not Compliant | 0 | |||
| LSHM-120-06.0-L-DV-A-N-K-TR | Samtec Inc | Mezzanine Connector Hermaphroditic Hermaphroditic 05 mm 2 Rows 40 Contacts Surface Mount (Alt: LSHM-120-06.0-L-DV-A-N-K-TR) RoHS : Compliant | 0 | |||
| LSEM-150-06.0-L-DV-A-N-K-TR | Samtec Inc | Conn High Speed Socket Strip SKT 100 POS 08mm Solder ST SMD TR (Alt: LSEM-150-06.0-L-DV-A-N-K-TR) RoHS : Compliant | 0 | |||
| LSHM-130-06.0-L-DV-A-N-K-FR | Samtec Inc | Mezzanine Connector Hermaphroditic 05 mm 2 Rows 60 Contacts Straight Solder Surface Mount (Alt: LSHM-130-06.0-L-DV-A-N-K-FR) RoHS : Compliant | 0 | |||
| LSHM-130-06.0-L-DV-A-S-K-TR | Samtec Inc | (Alt: LSHM-130-06.0-L-DV-A-S-K-TR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 67016-060LF | Amphenol FCi | IN STOCK SHIP TODAY |
| 450 | |
| FOD060L | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 165 | ||
| HCPL-060L | Avago Technologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
NDP6060L![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
PTH12060LAH![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | MS21060L08 | Military Specifications |
| 3 | ||
| 50M035060L008 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 96-DHLM-8060-L-PC | Southco | 0 | ||||
| 50M035060L010 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L035 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L006 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L016 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L020 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L025 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
| 50M035060L005 | Essentra Components | 90 SLOTTED CSK SCREW, M3.5 X . | 0 | |||
![]() EBV Elektronik | HCPL-060L-500E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-500E) RoHS : Compliant | 1,017,000 | ||
| HCPL-060L | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L) RoHS : Not Compliant | 1,600 | |||
| HCPL-060L-560E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-560E) RoHS : Compliant | 1,500 | |||
| HCPL-060L-000E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-000E) RoHS : Compliant | 1,300 | |||
| NDP6060L | onsemi | Power MOSFET N Channel 60 V 48 A 0025 ohm TO220 Through Hole (Alt: NDP6060L) RoHS : Compliant | 700 | |||
| FOD060L | onsemi | (Alt: FOD060L) RoHS : Compliant | 0 | |||
| NDB5060L | onsemi | NChannel Logic Level Enhancement Mode Field Effect Transistor 60V 26A 35mO (Alt: NDB5060L) RoHS : Compliant | 0 | |||
| FOD060LR2 | onsemi | (Alt: FOD060LR2) RoHS : Compliant | 0 | |||
| ZL38060LDG1 | Microchip Technology Inc | Timberwolf Audio Processor 64Pin QFN Tray (Alt: ZL38060LDG1) RoHS : Compliant | 0 | |||
| EL060L(TA)-V | Everlight Electronics Co Ltd | 8Pin Optocoupler High Speed (Alt: C190000042) RoHS : Compliant | 0 | |||
| NFAQ1060L36T | onsemi | Intelligent Power Module IPM 600 V 10 A (Alt: NFAQ1060L36T) RoHS : Compliant | 0 | |||
| NFCS1060L3TT | onsemi | Intelligent Power Module IPM PFC Combo 600V 10A (Alt: NFCS1060L3TT) RoHS : Compliant | 0 | |||
| NFAP1060L3TT | onsemi | Intelligent Power Module IPM 600 V 10 A with advanced SIP package (Alt: NFAP1060L3TT) RoHS : Compliant | 0 | |||
HCPL-060L#060![]() | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 1CH 8Pin SOIC (Alt: HCPL-060L#060) RoHS : Not Compliant | 0 | |||
| HCPL-060L-060E | Broadcom Limited | Optocoupler Digital Output 1 Channel 375 kV 15 Mbaud SOIC 8 Pins (Alt: HCPL-060L-060E) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FOD060L | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,136 | |
| NFAQ1060L36T | onsemi | Stock RoHS : Compliant | 1,970 | |||
| NFAQ1060L36T-01 | onsemi | Stock, Ship Today |
| 1,970 | ||
| HCPL-060L-500 | Broadcom Limited | Stock, Ship Today |
| 1,500 | ||
| NFCS1060L3TT | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,432 | ||
| NFCS1060L3TT-01 | onsemi | Stock, Ship Today |
| 1,144 | ||
| FOD060LR2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 873 | ||
| NFAQ1060L33T | onsemi | Stock, Ship Today RoHS : Compliant |
| 677 | ||
| NFAQ1060L33T-01 | onsemi | Stock, Ship Today |
| 132 | ||
| NFP36060L42T | onsemi | Stock, Ship Today RoHS : Compliant |
| 60 | ||
![]() Neutron USA | RTY060LVNAX | Honeywell Sensing and Control | Hall-effect Rotary Position Sensor, Integral Actuator, 60° (±30°) Vs: 5V NA 3-Pinout Ratiom Vout: 0.5 Vleft 4.5 Vright, Shaft No-lever, Linearity: ±1%, Op:-40~125°C |
| 50 | |
| WISE-4060LAN-B | Advantech Co Ltd | 4-ch DI and 4-ch Relay Output IoT Ethernet I/O (Replacement of WISE-4060/LAN-AE) RoHS : Compliant |
| 50 | ||
| K50RF-8060-LDQ | Banner Engineering Corp | Radar Sensor, R-GAGE, 2.5m, 10-30VDC, NPN/PNP, QD, K50R |
| 29 | ||
| K50RPF-8060-LDQ | Banner Engineering Corp | Distance Sensor Modules K50R Pro R-GAGE Series Radar Sensor Configurable LEDs; Range 3.0 m; 80x60 degree FOV; Flat Mount; Input: 10-30 V dc; Output 2 NPN/PNP Configurable; 5-pin M12 Integral QD |
| 3 | ||
RTP060LVEAA![]() | Honeywell Sensing and Control | Hall-effect Rotary Position Sensor, Ext Actuator, 60° (±30°) Vs: 5V, Eu 3-pin Ratiom Vout: 0.5V left, 4.5V right, Hous magnet, Linearity: ±2.0%, Op: -40~125°C |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0060LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 6,715 | ||
| PE3C0060LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,343 | ||
| PE3C0060LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,343 | ||
| PE3C0060LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,343 | ||
| PE3C0060LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0060LF/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0060LF/HS-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0060LF/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,343 | ||
| PE3W08060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to 3.5mm Female Cable Using PE-SR402AL Coax, LF Solder. PE3W08060LF is a 2.92mm male to 3.5mm female cable using PE-SR402AL coax. This Pasternack 2.92mm male to 3.5mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 2.92mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08060LF 2.92mm male to 3.5mm female cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W00060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable Using LMR-100 Coax, LF Solder. PE3W00060LF is a BNC male right angle to BNC female bulkhead cable using LMR-100A coax. This Pasternack BNC male right angle to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00060LF BNC male right angle to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C0060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-195 Coax, LF Solder. PE3C0060LF is a N male to N male cable using LMR-195 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0060LF N male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. N Male to TNC Male Right Angle Cable Using LMR-240-FR Coax, LF Solder. PE3W22060LF is a N male to TNC male right angle cable using LMR-240-FR coax. This Pasternack N male to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22060LF N male to TNC male right angle cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-400-DB Coax with HeatShrink, LF Solder. PE3C2060LF/HS is a N male to TNC male cable using LMR-400-DB coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2060LF/HS N male to TNC male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-400-LLPX Coax, LF Solder. PE3C10060LF is a BNC male to BNC male cable using LMR-400-LLPX coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10060LF BNC male to BNC male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-400-LLPX Coax with HeatShrink, LF Solder. PE3C10060LF/HS is a BNC male to BNC male cable using LMR-400-LLPX coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10060LF/HS BNC male to BNC male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Female to TNC Male Cable Using LMR-600 Coax with HeatShrink, LF Solder. PE3W02060LF/HS is a N female to TNC male cable using LMR-600 coax. This Pasternack N female to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02060LF/HS N female to TNC male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13060LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-240-DB Coax with HeatShrink, LF Solder. PE3W13060LF/HS is a N male to BNC male cable using LMR-240-DB coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13060LF/HS N male to BNC male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3060LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using PE-C100-LSZH Coax, LF Solder. PE3C3060LF is a N male to BNC male cable using PE-C100-LSZH coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3060LF N male to BNC male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
![]() Venkel Ltd. | SS2060LHE-EVL | VENKEL LTD | Rectifier;SOD-123HE;60V;2A RoHS : Not Compliant | 0 | ||
![]() Vyrian | NFP36060L42T | onsemi | AC Motor Controller RoHS : Compliant | 10,381 | ||
| MAX9060LABS | Analog Devices (Maxim Integrated) | 7,934 | ||||
| PF38F4060L0YBB0 | Micron Technology Inc | Memory Circuit, Flash+SDRAM, PBGA103 RoHS : Compliant | 7,178 | |||
| NFAQ1060L36T | onsemi | AC Motor Controller, 20A, Hybrid RoHS : Compliant | 6,591 | |||
| NFAQ1060L33T | onsemi | AC Motor Controller, 20A, Hybrid RoHS : Compliant | 5,756 | |||
| NFCS1060L3TT | onsemi | Brushless DC Motor Controller, 30A, Hybrid RoHS : Compliant | 5,634 | |||
| NFAP1060L3TT | onsemi | AC Motor Controller, 20A, Hybrid RoHS : Compliant | 5,198 | |||
| M36L0R7060L3ZSF-TR | Micron Technology Inc | 5,185 | ||||
| M36L0R7060L3ZSE | Micron Technology Inc | Memory Circuit, 8MX16, CMOS, PBGA56 RoHS : Compliant | 4,742 | |||
| M36L0R8060L3ZAME | Micron Technology Inc | Memory Circuit, 16MX16, CMOS, PBGA88 RoHS : Compliant | 4,486 | |||
| M36L0R7060L3ZSF | Micron Technology Inc | Memory Circuit, 8MX16, CMOS, PBGA56 RoHS : Compliant | 4,173 | |||
| PF38F3060L0YBB0 | Micron Technology Inc | Memory Circuit, Flash+SDRAM, PBGA103 RoHS : Compliant | 4,039 | |||
| PF38F3060L0YTB0 | Micron Technology Inc | Memory Circuit, Flash+SDRAM, PBGA103 RoHS : Compliant | 3,659 | |||
| M36L0R8060L3ZAMF | Micron Technology Inc | Memory Circuit, 16MX16, CMOS, PBGA88 RoHS : Compliant | 2,665 | |||
| PF38F4060L0YTB0 | Micron Technology Inc | Memory Circuit, Flash+SDRAM, PBGA103 RoHS : Compliant | 2,563 | |||
![]() Win Source Electronics | DMT12H060LFDF-7 | Diodes Incorporated | MOSFET BVDSS: 101V~250V U-DFN202 RoHS : Compliant |
| 90,000 | |
| HCPL-060L | Broadcom Limited | High Speed LVTTL Compatible 3.3 Volt Optocouplers | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Not Compliant |
| 15,000 | ||
| HCPL-060L-060E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO / High Speed LVTTL Compatible 3.3 Volt Optocouplers RoHS : Compliant |
| 14,370 | ||
| HCPL-060L-500E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,330 | ||
| HCPL-060L-000E | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,260 | ||
| HCPL-060L-560E | Broadcom Limited | High Speed LVTTL Compatible 3.3 Volt Optocouplers | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 14,000 | ||
HCPL-060L#500![]() | Broadcom Limited | OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Not Compliant |
| 13,760 | ||
| HMC1060LP3E | Analog Devices Inc | IC REG LINEAR POS ADJ 16QFN RoHS : Compliant |
| 5,000 | ||
| HMC1060LP3ETR | Analog Devices Inc | LDO Regulator Pos 3.3V5V 0.1A/0.5A/0.5A/0.3A 16-Pin LFCSP EP T/R / IC REG LDO ADJ 16SMT RoHS : Compliant |
| 4,520 | ||
| MRF9060LR1 | Nexperia | FET RF 65V 945MHZ NI-360 |
| 1,126 | ||
| MRF9060L | Nexperia | RF LDMOS Transistor 865-960MHz 60W 26V NI-780 |
| 1,120 | ||
ADSP-21060LCW-160![]() | Analog Devices Inc | SHARC Processor RoHS : Compliant |
| 100 | ||
ADSP-21060LABZ-160![]() | Analog Devices Inc | SHARC Processor RoHS : Compliant |
| 70 | ||
ADSP-21060LKSZ-160![]() | Analog Devices Inc | IC DSP CONTROLLER 32BIT 240MQFP RoHS : Compliant |
| 64 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |