0705-331M-R Price, Distributor, Stock

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

011207059905

Essentra Components

R4-10-40-705-10

Southco

R4-10-40-705-10

AC-CHA0-7-0591-033

Southco

EBV Elektronik

CYW20705B0KWFBGT

Infineon Technologies AG

(Alt: SP005660225)
RoHS : Compliant

CGM-22-30-70-54-AC40-F5-3

Luminus Devices

(Alt: CGM-22-30-70-54-AC40-F5-3)
RoHS : Compliant

CXM-32-50-70-54-AC30-F4-3

Luminus Devices

CXM32 (Alt: CXM-32-50-70-54-AC30-F4-3)
RoHS : Compliant

CGM-22-50-70-54-AC40-F5-3

Luminus Devices

(Alt: CGM-22-50-70-54-AC40-F5-3)
RoHS : Compliant

CGM-22-40-70-54-AC40-F5-3

Luminus Devices

(Alt: CGM-22-40-70-54-AC40-F5-3)
RoHS : Compliant

CXM-32-40-70-54-AC30-F4-3

Luminus Devices

CXM32 (Alt: CXM-32-40-70-54-AC30-F4-3)
RoHS : Compliant

CXM-32-50-70-54-AC30-F4-5

Luminus Devices

LED UniColor White 21645lm 5000K Chip LED 2Pin SMD Tray (Alt: CXM-32-50-70-54-AC30-F4-5)
RoHS : Compliant

CXM-22-50-70-54-AC40-F5-3

Luminus Devices

(Alt: CXM-22-50-70-54-AC40-F5-3)
RoHS : Compliant

CXM-32-50-70-54-AC40-F5-3

Luminus Devices

Generation 4 COB Array LED Neutral White 5000K 328mm LES Diameter 70 CRI 54V Tray (Alt: CXM-32-50-70-54-AC40-F5-3)
RoHS : Compliant

CXM-32-50-70-54-AC00-F2-5

Luminus Devices

LED UniColor White 19385lm 5000K Chip LED 2Pin SMD Tray (Alt: CXM-32-50-70-54-AC00-F2-5)
RoHS : Compliant

CXM-32-40-70-54-AC40-F5-3

Luminus Devices

LED COB Neutral White 4000K 5000mA Tray (Alt: CXM-32-40-70-54-AC40-F5-3)
RoHS : Compliant

CXM-27-50-70-54-AA30-F4-5

Luminus Devices

High Power LEDs (Alt: CXM-27-50-70-54-AA30-F4-5)
RoHS : Compliant

Flip Electronics

L150-50705030000S0

Lumileds

Stock, Ship Today
RoHS : Compliant

1 : $0.35

82,000

CYW20705A1KWFBGT

Infineon Technologies AG

Stock, Ship Today

1 : $0.9

10,445

CYW20705B0KWFBG

Infineon Technologies AG

Stock, Ship Today

1 : $2.12

190

Master Electronics

R307050F

Microchip Technology Inc

Std Rectifier
RoHS : Compliant

100 : $40.55
75 : $41.38
50 : $58.81
25 : $111.08

MTLW-107-05-G-S-135

Samtec Inc

.100 Low Profile Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.573
5,000 : $0.589
2,500 : $0.767
1,000 : $0.871
500 : $1.209
250 : $1.266
25 : $1.558

MTLW-107-05-G-S-180

Samtec Inc

.100 Low Profile Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.648
5,000 : $0.667
2,500 : $0.881
1,000 : $0.997
500 : $1.309
250 : $1.366
100 : $1.442
25 : $1.557

MTLW-107-05-L-S-000

Samtec Inc

.100 Low Profile Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.48
5,000 : $0.4931
2,500 : $0.6301
1,000 : $0.7463
500 : $1.0
250 : $1.0469
25 : $1.2885

MTLW-107-05-L-S-175-02

Samtec Inc

.100 Low Profile Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.6
5,000 : $0.616
2,500 : $0.781
1,000 : $0.871
500 : $1.209
250 : $1.266
25 : $1.558

MTLW-107-05-T-D-137

Samtec Inc

Connector Unshrouded Header 14 Position 2.54mm Solder Straight Through Hole
RoHS : Compliant

7,500 : $0.519
5,000 : $0.534
2,500 : $0.713
1,000 : $0.824
500 : $1.117
250 : $1.166
25 : $1.327

MTMM-107-05-F-D-095

Samtec Inc

VARIABLE POST HEIGHT HEAD
RoHS : Compliant

7,500 : $0.652
5,000 : $0.67
2,500 : $0.897
1,000 : $1.054
500 : $1.179
250 : $1.234
25 : $1.519

MTMM-107-05-F-D-220

Samtec Inc

2.00 mm Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.652
5,000 : $0.67
2,500 : $0.912
1,000 : $1.054
500 : $1.179
250 : $1.234
25 : $1.519

MTMM-107-05-G-D-245

Samtec Inc

2.00 mm Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.909
5,000 : $0.933
2,500 : $1.288
1,000 : $1.438
500 : $1.623
250 : $1.672
100 : $1.75
25 : $2.154

MTMM-107-05-G-D-290

Samtec Inc

2.00 mm Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.909
5,000 : $0.933
2,500 : $1.288
1,000 : $1.438
500 : $1.623
250 : $1.672
100 : $1.75
25 : $2.154

MTMM-107-05-H-S-005

Samtec Inc

RoHS : Compliant

7,500 : $1.05
5,000 : $1.08
2,500 : $1.45
1,000 : $1.67
500 : $1.88
250 : $1.94
100 : $2.03
10 : $2.5

MTMM-107-05-H-S-050

Samtec Inc

RoHS : Compliant

7,500 : $1.05
5,000 : $1.08
2,500 : $1.45
1,000 : $1.67
500 : $1.88
250 : $1.94
100 : $2.03
10 : $2.5

MTMM-107-05-L-D-110

Samtec Inc

RoHS : Compliant

7,500 : $0.745
5,000 : $0.747
2,500 : $1.027
1,000 : $1.2
500 : $1.328
250 : $1.391
100 : $1.435
25 : $1.712

MTMM-107-05-L-D-192

Samtec Inc

2.00 mm Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.745
5,000 : $0.747
2,500 : $1.027
1,000 : $1.2
500 : $1.328
250 : $1.391
100 : $1.435
25 : $1.712

MTMM-107-05-S-S-004

Samtec Inc

RoHS : Compliant

7,500 : $0.718
5,000 : $0.72
2,500 : $1.0
1,000 : $1.157
500 : $1.299
250 : $1.359
100 : $1.403
25 : $1.673

Pasternack Enterprises US

PE3W07053/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to SMB Plug Cable Using LMR-100 Coax with HeatShrink. PE3W07053/HS is a SMB jack bulkhead to SMB plug cable using LMR-100A coax. This Pasternack SMB jack bulkhead to SMB plug cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our jack SMB bulkhead to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07053/HS SMB jack bulkhead to SMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10705-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Female Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to TNC female cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to TNC female cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a TNC cable connection on the other. Our right angle MCX to TNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W10705-24 can also be known as a right angle MCX male to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10705-24 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. MCX male to TNC jack cable assembly PE3W10705-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10705-24 can also be used in the other direction and will be a TNC female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to TNC RF cable assembly as per your requirements.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3W10705-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Female Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to TNC female cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to TNC female cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a TNC cable connection on the other. Our right angle MCX to TNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W10705-36 can also be known as a right angle MCX male to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10705-36 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. MCX male to TNC jack cable assembly PE3W10705-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10705-36 can also be used in the other direction and will be a TNC female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to TNC RF cable assembly as per your requirements.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE3W07056

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Male Right Angle Cable Using RG142 Coax. PE3W07056 is a SMA female to reverse polarity SMA male right angle cable using RG142 coax. This Pasternack SMA female to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07056 SMA female to SMA reverse polarity male right angle cable assembly is constructed with RG142 coax.

PE3W10705-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Female Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to TNC female cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to TNC female cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a TNC cable connection on the other. Our right angle MCX to TNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W10705-48 can also be known as a right angle MCX male to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10705-48 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. MCX male to TNC jack cable assembly PE3W10705-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10705-48 can also be used in the other direction and will be a TNC female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to TNC RF cable assembly as per your requirements.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3W07051

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female Cable Using RG178 Coax. PE3W07051 is a SMA male right angle to BNC female cable using RG178 coax. This Pasternack SMA male right angle to BNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07051 SMA male right angle to BNC female cable assembly is constructed with RG178 coax.

PE3W10705

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Female Cable Using RG316 Coax., Radio frequency assembly MCX plug right angle to TNC female cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to TNC female cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a TNC cable connection on the other. Our right angle MCX to TNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W10705 can also be known as a right angle MCX male to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10705 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. MCX male to TNC jack cable assembly PE3W10705 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10705 can also be used in the other direction and will be a TNC female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to TNC RF cable assembly as per your requirements.

PE3W10705-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Female Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to TNC female cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to TNC female cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a TNC cable connection on the other. Our right angle MCX to TNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W10705-12 can also be known as a right angle MCX male to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W10705-12 RF cable has a FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. MCX male to TNC jack cable assembly PE3W10705-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10705-12 can also be used in the other direction and will be a TNC female to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to TNC RF cable assembly as per your requirements.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3W00705

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Female Bulkhead Cable Using RG316 Coax. PE3W00705 is a reverse polarity SMA male to N female bulkhead cable using RG316 coax. This Pasternack reverse polarity SMA male to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00705 SMA reverse polarity male to N female bulkhead cable assembly is constructed with RG316 coax.

PE3W07055

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to Double Banana Plug Cable Using LMR-195 Coax. PE3W07055 is a SMA female 4 hole flange to Double Banana plug cable using LMR-195 coax. This Pasternack SMA female 4 hole flange to Double Banana plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Double Banana for connector 2. Our female SMA 4 hole flange to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07055 SMA female 4 hole flange to Double Banana plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W07053LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to SMB Plug Cable Using LMR-100 Coax, LF Solder. PE3W07053LF is a SMB jack bulkhead to SMB plug cable using LMR-100A coax. This Pasternack SMB jack bulkhead to SMB plug cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our jack SMB bulkhead to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07053LF SMB jack bulkhead to SMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W07057

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Female Cable Using RG142 Coax. PE3W07057 is a SMA female to reverse polarity SMA female cable using RG142 coax. This Pasternack SMA female to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07057 SMA female to SMA reverse polarity female cable assembly is constructed with RG142 coax.

PE3W07054/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-195 Coax with HeatShrink. PE3W07054/HS is a N male to N male cable using LMR-195 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07054/HS N male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C0705

Pasternack Enterprises

PE3W20705

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG180B/U, RF Cable Type: RG180, RF Cable Impedance: 95 Ohm. 75 Ohm SMC Plug Right Angle to 75 Ohm BNC Male Cable Using 95 Ohm RG180 Coax. PE3W20705 is a SMC plug right angle to BNC male cable using RG180 coax. This Pasternack SMC plug right angle to BNC male cable assembly uses a 75 Ohm SMC for connector 1 and a 75 Ohm BNC for connector 2. SMC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC right angle to male BNC cable assembly uses a flexible cable type that is 95 Ohm. Pasternack PE3W20705 SMC plug right angle to BNC male cable assembly is constructed with RG180 coax.