| Electronic Components Datasheet Search |
|
0L200DC-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 0680L2000-01 | Bel Fuse | FUSE BRD MNT 2A 125VAC/VDC 2SMD RoHS : Compliant |
| 5,544 | |
| 0680L2000-01 | Bel Fuse | FUSE BRD MNT 2A 125VAC/VDC 2SMD RoHS : Compliant |
| 5,544 | ||
| 0680L2000-01 | Bel Fuse | FUSE BRD MNT 2A 125VAC/VDC 2SMD RoHS : Compliant |
| 584 | ||
| CA20L20-29PBA232-05 | PEI-GENESIS | CB 17C 17#16 PIN RECP BOX |
| 400 | ||
| AE770L20-24SY-LC | PEI-GENESIS | AE7 24C 24#20 SKT RECP |
| 316 | ||
| RT0L-20CPG-S5 | Amphenol Sine Systems | CABLE GRIP 13.5-14MM 1 3/16-18 |
| 247 | ||
| CB0L20-19PS | PEI-GENESIS | CB 3C 3#8 PIN RECP WALL |
| 155 | ||
| MS3470L20-24S | PEI-GENESIS | AE7 24C 24#20 SKT RECP |
| 123 | ||
| AE770L20-24SY | PEI-GENESIS | AE7 24C 24#20 SKT RECP |
| 123 | ||
| CA20L20-27PXB05 | PEI-GENESIS | CB 14C 14#16 PIN RECP BOX |
| 90 | ||
| MS3470L20-41S | Amphenol Aerospace | MATRIX 26482 II |
| 46 | ||
| MS3450L20-4S | PEI-GENESIS | 5015 RR 4#12 SKT RECP |
| 37 | ||
| AE770L20-16PZ-LC | PEI-GENESIS | AE7 16C 16#16 PIN RECP |
| 35 | ||
| LEDWS50L20-XQ | Banner Engineering Corp | VISION SYS SPOT LIGHT 50MM WHT |
| 2 | ||
| MS3450L20-15S | Amphenol Aerospace | RECEPT |
| 1 | ||
![]() Avnet Americas | ACT1210L-201-2P-TL00 | TDK Corporation | Common Mode Choke, 200?H, 70 mA, 1210 [3225 Metric], ACT1210L-201 Series - Tape and Reel (Alt: ACT1210L-201-2P-TL00) RoHS : Compliant |
| 12,000 | |
| 520L20020ITR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 20MHz ?2ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 520L20020ITR) RoHS : Compliant |
| 0 | ||
| 520L20025DTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 20MHz ?2.5ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 520L20025DTR) RoHS : Compliant |
| 0 | ||
| 520L20CA40M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20CA40M0000) RoHS : Compliant | 0 | |||
| 580L20405CAT | CTS Corporation | - Tape and Reel (Alt: 580L20405CAT) RoHS : Compliant |
| 0 | ||
| 580L20405DTT | CTS Corporation | - Tape and Reel (Alt: 580L20405DTT) RoHS : Compliant |
| 0 | ||
| CA20L20A48S-B-A241 | ITT Interconnect Solutions | - Bulk (Alt: CA20L20A48S-B-A241) RoHS : Not Compliant |
| 0 | ||
| CA20L20A48SYB-A241 | ITT Interconnect Solutions | - Bulk (Alt: CA20L20A48SYB-A241) RoHS : Not Compliant |
| 0 | ||
| 0680L2000-01 | Bel Fuse | - Tape and Reel (Alt: 0680L2000-01) RoHS : Not Compliant |
| 0 | ||
| MMSD-10-20-L-20.00-D-K-MUS | Samtec Inc | - Bulk (Alt: MMSD-10-20-L-20.00-D-K-MUS) RoHS : Compliant | 0 | |||
| MMSS-05-30-L-20.00-D-K-LDS | Samtec Inc | Cable Assembly, IDC Receptacle to IDC Receptacle, 5 Ways, 2.54 mm, 1 Row, 508 mm, 20 "" - Bulk (Alt: MMSS-05-30-L-20.00-D-K-LDS) RoHS : Compliant | 0 | |||
| M83723/90L2041N | Amphenol Corporation | - Bulk (Alt: M83723/90L2041N) RoHS : Not Compliant |
| 0 | ||
| M-2010L2000JBTS | Vishay Intertechnologies | - Waffle Pack (Alt: M-2010L2000JBTS) RoHS : Not Compliant |
| 0 | ||
| PESS-06-10-L-20.00-SR | Samtec Inc | - Bulk (Alt: PESS-06-10-L-20.00-SR) RoHS : Compliant |
| 0 | ||
| PGM-100L-200PSI/14BAR | Omega Engineering | - Bulk (Alt: PGM-100L-200PSI/14BAR) RoHS : Not Compliant |
| 0 | ||
![]() Newark | YU0AC222M080L20C5H | SPC Multicomp | CAP, 2200PF, 20%; RoHS : Compliant |
| 3,120 | |
| YU0AS102M080L20CCH | SPC Multicomp | CAP, 1000PF, 20%; RoHS : Compliant |
| 2,285 | ||
| 1210L200PR | Littelfuse Inc | FUSE RES PPTC 1210 (3225 METRIC) 2A 6VDC; RoHS : Compliant |
| 2,000 | ||
| 1210L200PR | Littelfuse Inc | FUSE RES PPTC 1210 (3225 METRIC) 2A 6VDC; RoHS : Compliant |
| 2,000 | ||
| 600L200FT200T | Kyocera AVX Components | RF CAP, 20PF, 200VDC, 1% TOL, 0402; RoHS : Compliant |
| 1,450 | ||
| 600L200FT200T | Kyocera AVX Components | RF CAP, 20PF, 200VDC, 1% TOL, 0402; RoHS : Compliant |
| 1,450 | ||
| 2920L200/24DR | Littelfuse Inc | RESETTABLE FUSE, PTC, 2A, 24V, 2923; RoHS : Compliant |
| 1,031 | ||
| 2920L200/24DR | Littelfuse Inc | RESETTABLE FUSE, PTC, 2A, 24V, 2923; RoHS : Compliant |
| 1,031 | ||
| 0680L2000-05 | Bel Fuse | FUSE SMD, 2A, SLOW BLOW, 125V; RoHS : Compliant |
| 298 | ||
| 0680L2000-05 | Bel Fuse | FUSE SMD, 2A, SLOW BLOW, 125V; RoHS : Compliant |
| 298 | ||
| PSR400ITQFC0L20 | ROHM Semiconductor | RES, 0R0002, 12W, METAL PLATE, 3921; RoHS : Compliant |
| 261 | ||
| PSR400ITQFC0L20 | ROHM Semiconductor | RES, 0R0002, 12W, METAL PLATE, 3921; RoHS : Compliant |
| 261 | ||
| MS3470L20-16S | Conesys | CIRCULAR CONN, RCPT, 20-16, WALL MOUNT; RoHS : Not Compliant |
| 5 | ||
| DCM1A60V10L20S1ULB | Carlo Gavazzi Holding AG | DC ENERGY METER, 600A, 1KV, DIN RAIL; No. of Phases:-; Supply Voltage:12VDC to 24VDC; Energy Meter Mounting:DIN Rail; Product Range:DCM1 Series RoHS Compliant: Yes RoHS : Compliant |
| 1 | ||
| DCM1A30V10L20S1ULB | Carlo Gavazzi Holding AG | DC ENERGY METER, 300A, 1KV, DIN RAIL; No. of Phases:-; Supply Voltage:12VDC to 24VDC; Energy Meter Mounting:DIN Rail; Product Range:DCM1 Series RoHS Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() RS | RT0L-20CG-S | Amphenol Sine Systems | CORD GRIP; STRAIGHT; 16.5-22MM CABLE RANGE; 1" 3/16-18 UNEF THREAD |
| 3 | |
| VPPL-3L-3-G14-0L20H-A4-A-S1-6 (1635992) | Festo | PROPORTIONAL-PRESSURE REGULATOR, 3 WAY, G1/4, .2-20 BAR REG RANGE, 300L/MIN |
| 2 | ||
| BRP30L200R | Eaton Cutler-Hammer | BR PON LOADCENTER, 200A, MLO, 30 SPACE, N3R |
| 1 | ||
| QO330L200G | Square D by Schneider Electric | LOAD CENTER QO MLO 240V 200A 3PH 30SP |
| 1 | ||
| QON330L200 | Schneider Electric | OEM MTG BASE QO MLO 240V 200A 3PH 30SP RoHS : Compliant |
| 1 | ||
| 26700-140-L20X | AVEN | MICROVUE AUXILIARY LENS 2.0X |
| 1 | ||
| A4BY2500 (L200892) | Mersen Electrical Power | FUSE, CLASS L, TIME DELAY, 200KA AC/100KA DC, 600VAC, 300VDC, 2500A |
| 1 | ||
| DCM1A30V10L20S1ULB | Carlo Gavazzi Holding AG | ENERGY METER, 1000V, 300A, ETH+RS485, BIDIRECTIONAL, DCM1 SERIES RoHS : Compliant |
| 1 | ||
| LEDWS50L20-XQ (19028) | Banner Engineering Corp | VISION LIGHT-50MM SPOT LIGHT, VOLTAGE, 12-30VDC, VISION LIGHT SERIES |
| 1 | ||
| 1120L20 | Gates | MICRO-V BELT |
| 0 | ||
| BRP40L200R | Eaton Cutler-Hammer | BR PON LOADCENTER, 200A, MLO, 40 SPACE, N3R |
| 0 | ||
| RT0L-20CPG-S5 | Amphenol Sine Systems | CORD GRIP, SHELL SIZE 20, CABLE RANGE, 13.5-14.0MM |
| 0 | ||
| ITV9550L2060MR | Littelfuse Inc | ITV 9.5*5.0mm 20V 60A RoHS : Compliant |
| 0 | ||
| CY1F10L-200-M9BL | SMC Corporation of America | CYLINDER, RODLESS, MAGNETICALLY COUPLED, CY1 SERIES |
| 0 | ||
| DCM1A60V10L20S1PFA | Carlo Gavazzi Holding AG | ENERGY METER, 1000V, 600A, ETH+RS485, MID, DCM1 SERIES |
| 0 | ||
![]() Rochester Electronics | SN74ACT7200L20DV![]() | Texas Instruments | FIFO, 256X9, Asynchronous, CMOS, PDSO28 RoHS : Not Compliant |
| 1,534 | |
SN74ACT7200L20RJ![]() | Texas Instruments | FIFO, 256X9, Asynchronous, CMOS, PQCC32 RoHS : Not Compliant |
| 1,536 | ||
| RP110L201D-TR | Nisshinbo Micro Devices | Fixed Positive LDO Regulator, 2V, 0.48V Dropout, CMOS, PDSO4 RoHS : Compliant |
| 30,000 | ||
PSR500HTQFC0L20![]() | ROHM Semiconductor | RF Transceiver (Board Mount) TxRx + MCU Bluetooth, WiFi 145-BGA T/R RoHS : Compliant |
| 2,000 | ||
RP110L201D-TR![]() | Ricoh Electronic Devices Co Ltd | Fixed Positive LDO Regulator, 2V, 0.48V Dropout, CMOS, PDSO4 RoHS : Compliant |
| 11,042 | ||
![]() Coilcraft Direct | SPT50L-205MLD | Coilcraft Inc | Power inductor, toroid, 20% tol, SMT, RoHS RoHS : Compliant |
| 192 | |
![]() TME | 0680L2000-05 | Bel Fuse | Fuse: fuse; 6.1x2.54x2.54mm; ceramic; SMD; 2A; 125VAC; 125VDC; 0680L RoHS : Compliant |
| 4,749 | |
| 2455RP 9100-430 L20C | Honeywell Sensing and Control | Sensor: thermostat; Topen: 20°C; Tclos: 10°C |
| 3,411 | ||
| 2920L200/24DR | Littelfuse Inc | Fuse: PTC polymer; SMD; 2A; 2920L; 2920 RoHS : Compliant |
| 1,821 | ||
| KABX-2PMM0-L200 | ESPE Group | Cable; male-male; PIN: 2; 0.2m; 4A; Insulation: PVC; black-red; TLYp |
| 12 | ||
| HVCOCF6ATR8SF950L2000 | Amphenol Corporation | IP44; Type 2; 125A; Colour: black; -30÷50°C |
| 7 | ||
| MVP 10 L20 | ILME UK Ltd | Enclosure for connectors: HDC; size 57.27; with latch; V-TYPE |
| 0 | ||
| PJD18N20_L2_00001 | PanJit Semiconductor | Transistor: N-MOSFET; unipolar; 200V; 11A; Idm: 72A; 83W; TO252AA RoHS : Compliant |
| 0 | ||
| 0680L2000-25 | Bel Fuse | Fuse: fuse; 6.1x2.54x2.54mm; SMD; 2A; 125VAC; 125VDC; time-lag; 2410 RoHS : Compliant |
| 0 | ||
| MHP 10 L20 | ILME UK Ltd | Enclosure for connectors: HDC; size 57.27; with latch; C-TYPE |
| 0 | ||
| 1210L200PR | Littelfuse Inc | Fuse: PTC polymer; SMD; 2A; 1210L; 1210 RoHS : Compliant |
| 0 | ||
| 0680L2000-21 | Bel Fuse | Fuse: fuse; 6.1x2.54x2.54mm; automotive; SMD; 2A; 125VAC; 125VDC RoHS : Compliant |
| 0 | ||
| BRP003R0L206FA | Liaoning Brother Electronics Technology Co Ltd | Supercapacitor; THT; 20F; 3VDC; ±20%; Ø16x34mm; 37.5mΩ; -40÷65°C |
| 0 | ||
| MHV 10 L20 | ILME UK Ltd | Enclosure for connectors: HDC; size 57.27; for cable; for latch |
| 0 | ||
| RVP 10 L20 | ILME UK Ltd | Enclosure for connectors: HDC; size 57.27; with latch; 57x27mm |
| 0 | ||
| D10L200S99W-168 | Advanced Thermal Solutions Inc | Heatsink: heat pipe; round; natural; L: 200mm; copper; raw; Ø: 10mm |
| 0 | ||
![]() Ameya Holding Limited | PSR500HTQFC0L20![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | |
![]() ComSIT USA | 0680L200001 | Bel Fuse | AVAILABLE EU | 386 | ||
| V250L20 | Littelfuse Inc | AVAILABLE EU | 289 | |||
| 2920L20024DR | Littelfuse Inc | AVAILABLE EU | 806 | |||
| V420L20 | Siemens | AVAILABLE EU | 473 | |||
![]() ComSIT USA | QX11059200BD10L205050LF | Sunny Electronics Corp | Electronic Component RoHS : Compliant | 900 | ||
| DS1100L20+ | Dallas Semiconductor | Electronic Component RoHS : Compliant | 89 | |||
![]() Interstate Connecting Components | HVCOCF6ATR8SF970L2000 | Amphenol Sine Systems | COMBO VEHICLE INLET 200 A WITH | 0 | ||
| RT0L-20CPG-S5 | Amphenol Sine Systems | BACKSHELL, STRAIGHT, CABLE RAN |
| 0 | ||
| MS3450L20-15S | Conesys | Wall Mt. Recept Nickel Alum |
| 0 | ||
| MS3450L20-15S | Amphenol Aerospace | RECEPT 3450L2015S | 0 | |||
| MS3450L20-22A | Amphenol Aerospace | RECEPT 3450L2022A | 0 | |||
| MS3450L20-4S | Amphenol Aerospace | RECEPT 3450L204S | 0 | |||
| HVSL1000082A170L2000 | Amphenol PCD | HVSL SERIES CODING A 2POS WITH INTERLOCK | 0 | |||
| CA20L20A48P-B | ITT Interconnect Solutions | CA20L20A48P-B RoHS : Not Compliant | 0 | |||
| MS3470L20-41S | Amphenol Aerospace | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl | 0 | |||
| MS3470L20-41S | SOURIAU-SUNBANK | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl | 0 | |||
| MS3450L20-2P L/C | Amphenol Aerospace | RECEPT 3450L202PL | 0 | |||
| MS3450L20-14S | Amphenol Aerospace | RECEPT 3450L2014S | 0 | |||
| MS3450L20-18S L/C | Amphenol Aerospace | RECEPT 3450L2018SL | 0 | |||
| MS3450L20-21A | Amphenol Aerospace | RECEPT 3450L2021A | 0 | |||
| GCA20L20A48PB | Amphenol PCD | RECEPTACLE PCB 19 CONTACTS | 0 | |||
![]() NexGen Digital | M8H882B110L2.0A15 | RTX | 331 | |||
| M8H882B1110L2.0A15 | RTX | 120 | ||||
![]() PEI Genesis | MS3470L20-24S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 123 | |
| AE770L20-24SY | Aero-Electric Connector Inc |
| 123 | |||
| MS3450L20-4S | Amphenol Aerospace |
| 37 | |||
| AE770L20-16PZ-LC | Aero-Electric Connector Inc |
| 0 | |||
| RT0L-20CPG-S5 | Amphenol Sine Systems |
| 0 | |||
| PV70L20-16PY | ITT Interconnect Solutions |
| 0 | |||
| MS3450L20-15S | Amphenol Aerospace |
| 0 | |||
| MS3450L20-18P-LC | Amphenol Aerospace |
| 0 | |||
| MS3450L20-4S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3470L20-24S | Amphenol Aerospace |
| 0 | |||
| AE770L20-16S-LC | Aero-Electric Connector Inc |
| 0 | |||
| PV70L20-16SW | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MS3470L20-24PX | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3470L20-41S | Amphenol Aerospace |
| 0 | |||
| AE770L20-16PZ | Aero-Electric Connector Inc |
| 0 | |||
![]() Powell Electronics | AE770L20-41S-LC | Conesys | AE7 41C 41#20 SKT RECP |
| 102 | |
| AE770L20-41SY-LC | Conesys | AE7 41C 41#20 SKT RECP |
| 102 | ||
| AE770L20-39P-LC | Conesys | CONNECTOR |
| 102 | ||
| AE770L20-39PZ-LC | Conesys | CONNECTOR |
| 102 | ||
| MS3470L20-39PW-LC | Conesys | Circular Connector |
| 102 | ||
| MS3450L20-8PX | Conesys | Wall Mount Receptacle |
| 96 | ||
| MS3450L20-8PY | Conesys | Wall Mount Receptacle |
| 96 | ||
| AE770L20-41PW-LC | Conesys | CONNECTOR |
| 84 | ||
| AE770L20-24SY | Conesys | CONNECTOR |
| 81 | ||
| AE770L20-24SY-LC | Conesys | CONNECTOR |
| 81 | ||
| AE770L20-24SW | Conesys | CONNECTOR |
| 81 | ||
| MS3450L20-27P | Conesys | Wall Mount Receptacle |
| 57 | ||
| MS3450L20-2PX | Conesys | WALL MT. REC. |
| 21 | ||
| MS3470L20-24S | Conesys | Wall Mount Receptacle |
| 10 | ||
| 3450L2019S | Amphenol Corporation | MIL- C 5015 RECEPT CONNECTOR |
| 8 | ||
![]() Richardson RFPD | 600L200JT200T | Kyocera AVX Components | Cap Ceramic 20pF 200V C0G 5% Pad SMD 0402 125C Ult RoHS : Compliant | 0 | ||
| 600L200GT200T | Kyocera AVX Components | Cap Ceramic 20pF 200V C0G 2% Pad SMD 0402 125C Ult RoHS : Compliant | 0 | |||
| 600L200JT200T\\4K | Kyocera AVX Components | Multilayer Ceramic Chip Capacitor RoHS : Compliant | 0 | |||
| 600L200FT200T | Kyocera AVX Components | Cap Ceramic 20pF 200V C0G 1% Pad SMD 0402 125C Ult RoHS : Compliant | 0 | |||
| 600L200GT200T\\4K | Kyocera AVX Components | Multilayer Ceramic Chip Capacitor RoHS : Not Compliant | 0 | |||
| ATS-HP-D10L200S99W-168 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Round Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | ||
![]() Rutronik | 2920L200/24DR | Littelfuse Inc | POLYFUSE 2A 24V SMD 2920 RoHS : Compliant |
| 10,500 | |
| PJD8NA50_L2_00001 | PanJit Touch Screens | N-CH 500V 8A 800mOhm TO252AA RoHS : Compliant |
| 9,000 | ||
| 409-3-100L2-010-550808-BS-0055 | MPE-Garry GmbH | FFC-Cable 10P pitch=1.00mm L=055mm RoHS : Compliant |
| 3 | ||
![]() Chip 1 Exchange | 0680L2000-05 | INSTOCK | 156,000 | |||
| WP90400L20 | INSTOCK | 9,000 | ||||
| 2455RP 9100-430 L20C | Honeywell Sensing and Control | INSTOCK | 4,969 | |||
| PJD3NA80_L2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 2,984 | |||
| PJD2NA90_L2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 2,931 | |||
![]() Avnet Abacus | 0680L2000-01 | Bel Fuse | - Tape and Reel (Alt: 0680L2000-01) RoHS : Compliant | 68,000 | ||
| 0680L2000-21 | Bel Fuse | - Tape and Reel (Alt: 0680L2000-21) RoHS : Compliant | 0 | |||
| CA20L20A48P-B | ITT Interconnect Solutions | (Alt: 121575-0071) RoHS : Not Compliant | 0 | |||
| 520L20CA40M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20CA40M0000) RoHS : Compliant | 0 | |||
| 520L20DA40M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20DA40M0000) RoHS : Compliant | 0 | |||
| 520L20HA13M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20HA13M0000) RoHS : Compliant | 0 | |||
| 520L20DA38M4000 | CTS Corporation | - Tape and Reel (Alt: 520L20DA38M4000) RoHS : Compliant | 0 | |||
| 520L20DT19M2000 | CTS Corporation | - Tape and Reel (Alt: 520L20DT19M2000) RoHS : Compliant | 0 | |||
| 520L20DA16M3690 | CTS Corporation | - Tape and Reel (Alt: 520L20DA16M3690) RoHS : Compliant | 0 | |||
| 520L20HT26M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20HT26M0000) RoHS : Compliant | 0 | |||
| 520L20CA26M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20CA26M0000) RoHS : Compliant | 0 | |||
| 520L20IA40M0000 | CTS Corporation | - Tape and Reel (Alt: 520L20IA40M0000) RoHS : Compliant | 0 | |||
| CA20L20A48S-B-A241 | ITT Interconnect Solutions | (Alt: 121575-5588) RoHS : Not Compliant | 0 | |||
| PESS-02-10-L-20.00-SR | Samtec Inc | Cable Assembly Discrete Wire 0508m 10AWG 2POS Power SKT (Alt: PESS-02-10-L-20.00-SR) RoHS : Compliant | 0 | |||
| MMSD-10-20-L-20.00-S-K | Samtec Inc | Cable Assembly IDC Receptacle to Free End 20 Ways 254 mm 2 Row 508 mm 20 (Alt: MMSD-10-20-L-20.00-S-K) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PSR100ITQFC0L20 | ROHM Semiconductor | HIGH POWER METAL PLATE SHUNT RESISTORS (Alt: PSR100ITQFC0L20) RoHS : Compliant | 0 | ||
| PSR400ITQFC0L20 | ROHM Semiconductor | (Alt: PSR400ITQFC0L20) RoHS : Compliant | 0 | |||
| 10162420-L20002LF | Amphenol Corporation | FCI10162420-L20002LF OCTIS RJ45 2M CABLE (Alt: 10162420-L20002LF) RoHS : Compliant | 0 | |||
PSR500HTQFC0L20![]() | ROHM Semiconductor | (Alt: PSR500HTQFC0L20) RoHS : Compliant | 0 | |||
| 10162420-L20003LF | Amphenol Corporation | FCI10162420-L20003LF OCTIS RJ45 2MCABLE (Alt: 10162420-L20003LF) RoHS : Compliant | 0 | |||
| 0680L2000-05 | Bel Fuse | (Alt: 0680L2000-05) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | PJD18N20_L2_00001 | PanJit Semiconductor | (Alt: PJD18N20_L2_00001) RoHS : Compliant | 0 | ||
| PJD65R660_L2_00001 | PanJit Semiconductor | (Alt: PJD65R660_L2_00001) RoHS : Compliant | 0 | |||
| PJD65R980_L2_00001 | PanJit Semiconductor | (Alt: PJD65R980_L2_00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | SPT50L-205MXB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 10 | ||
| 2920L200DR | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
![]() DB Roberts | LIN-X60-L2040 | Sugatsune Kogyo Co Ltd | ROD LENGTH 2040MM | 0 | ||
| LIN-X450-L2040 | Sugatsune Kogyo Co Ltd | CONNECTING BAR L2040MM | 0 | |||
![]() EBV Elektronik | TSF10L200CW COG | Taiwan Semiconductor | 10A 100V200V Trench Schottky Rectifiers (Alt: TSF10L200CW COG) RoHS : Compliant | 0 | ||
![]() ECCO | AE770L20-41S-LC | Aero-Electric Connector Inc | 55 | |||
| AE770L20-16P | Aero-Electric Connector Inc | 32 | ||||
| MS3450L20-3AY | Aero-Electric Connector Inc | 24 | ||||
| AE550L20-16PY-LC | Aero-Electric Connector Inc | 24 | ||||
| MS3450L20-15SW-LC | Aero-Electric Connector Inc | RoHS : Not Compliant | 24 | |||
| AE550L20-15B | Aero-Electric Connector Inc | 24 | ||||
| AE550L20-15SZ-01 | Aero-Electric Connector Inc | 24 | ||||
| MS3450L20-16P-LC | Aero-Electric Connector Inc | 24 | ||||
| MS3450L20-16PX-LC | Aero-Electric Connector Inc | 24 | ||||
| MS3450L20-3P-LC | Aero-Electric Connector Inc | 24 | ||||
| AE550L20-15SW-01 | Aero-Electric Connector Inc | 24 | ||||
| AE550L20-3AX | Aero-Electric Connector Inc | 24 | ||||
| AE550L20-4SY-01 | Aero-Electric Connector Inc | 19 | ||||
| AE770L20-39P-LC | Aero-Electric Connector Inc | 11 | ||||
| AE770L20-39A | Aero-Electric Connector Inc | 11 | ||||
![]() FDH Electronics | M6855/4-10-L207 | Warco Biltrite | Wire Management | 450 | ||
| MS3470L20-41PY | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41SY L/C | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41PX | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41PX L/C | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41PY L/C | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41SX | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-41SY | Amphenol Aerospace | Connector 26482 | 19 | |||
| MS3470L20-16P | TE Connectivity | Circular Conn |
| 14 | ||
| MS3470L20-41PW-LC | Amphenol Aerospace | Circular Conn |
| 12 | ||
| MS3470L20-41P | MilSpec Products Inc | Intro Placehldr | 6 | |||
| MS3450L20-8PX | Aero-Electric Connector Inc | Connector 5015 RoHS : Not Compliant | 2 | |||
| SE16C3120L2.0E64 | SOURIAU-SUNBANK | Backshells & Ac | 2 | |||
| MS3450L20-15P | MilSpec Products Inc | Intro Placehldr | 2 | |||
| MS3450L20-22P | Amphenol Aerospace | Connector 5015 | 0 | |||
![]() Maritex | 1210L200PR | Littelfuse Inc | PTC Resettable Fuses; 1210L200PR; LITTELFUSE; 4 A; 2 A; 1210; 100 A RoHS : Compliant |
| 731 | |
| 2920L200DR | Littelfuse Inc | PTC Resettable Fuses; 2920L200DR; LITTELFUSE; 4 A; 2 A; 5 s; 2920 RoHS : Compliant |
| 3 | ||
![]() Master Electronics | 0680L2000-01 | Bel Power Solutions | Surface mount bricks Silver Plated 2410 case size Slow Blow 2A Tape and Reel (1000 pcs.) RoHS : Compliant |
| 2,000 | |
| CA20L20A48S-B-A241 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| CA20L20A48SYB-A241 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| SGE151001100L2000C2000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MMSD-02-20-L-20.87-S-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-08-20-L-20.00-D-K-LDX | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-10-20-L-20.00-D-K-MUS | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSDT-25-20-L-20.05-D-K-LD | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSS-05-30-L-20.00-D-K-LDS | Samtec Inc | .100 Mini Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSST-05-20-L-20.00-D-K-LD | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-03-20-L-20.8-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTDT-02-20-L-20.9 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PESS-06-10-L-20.00-SR | Samtec Inc | .250 PowerStrip™/40 A Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-02-20-L-20.00-D-K-MUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-06-20-L-20.00-S-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | EM14R1D-M20-L208S | Bourns Inc | Encoders ROTARY OPTICAL ENCODER - 14MM RoHS : Compliant |
| 50 | |
| TFBR100L20RKL | Ohmite Mfg Co | Planar Resistors - Chassis Mount 20 ohm 10% 1000V |
| 19 | ||
| DCM1A60V10L20S1ULB | Carlo Gavazzi Holding AG | Power Analyzers Energy meter for DC systems up to 1000V DC and current up to 600A. Remote display, DIN rail mount, Ethernet Modbus TCP + Modbuse RTU, CTEP compliance (bidirectional) |
| 5 | ||
| DCM1A30V10L20S1ULB | Carlo Gavazzi Holding AG | Power Analyzers Energy meter for DC systems up to 1000V DC and current up to 300A. Remote display, DIN rail mount, Ethernet Modbus TCP + Modbuse RTU, CTEP compliance (bidirectional) RoHS : Compliant |
| 4 | ||
| LEDWS50L20-XQ | Banner Engineering Corp | Vision Light-50mm Spot Light, 12-30VDC, White; 20 Deg Lens, QDM12, 19028 |
| 3 | ||
| LEDRS50L20-XQ | Banner Engineering Corp | Vision Light-50mm Spot Light; Voltage; 12-30VDC; Vision Light Series |
| 2 | ||
| DCM1A30V10L20S1PFB | Carlo Gavazzi Holding AG | Power Meters & Energy Meters DC METER, 1000 V 300 A, ETH+RS485, MID BIDIRECTIONAL |
| 1 | ||
| CP110L-20 | ABB Low Voltage Products and Systems | CP PB MOM FLS BLU 2NO BLK RNG, Non-illuminated |
| 0 | ||
![]() Pasternack Enterprises US | PE80L2003 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 20 MHz, Maximum Frequency: 4 GHz, Maximum Insertion Loss: 0.8 dB, Design Type: High Power, Peak Power: 100 Watt, Connector Option: Field Replaceable, Leakage (CW): 13 dBm, Recovery Time : 15,000 ns. High Power Limiter, Field Replaceable SMA, 100W Peak Power, 15 us Recovery, 13 dBm Flat Leakage, 20 MHz to 4 GHz., Pasternack ships all of our products, including the PE80L2003 high power field replaceable broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 100W at 10µs Pulse Width 5% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 100W limiter has SMA female to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2003 high power field replaceable high-power limiter features an impressive maximum insertion loss of 0.8 dB. The PE80L2003 SMA to SMA limiter has a typical recovery time of 15,000 nanoseconds. Pasternack’s PE80L2003 100W limiter has a 0.8 dB maximum insertion loss, and a minimum operational temperature range of 0 degrees C to a maximum of 50°C. PE80L2003 is a RF high power 100W at 10µs Pulse Width 5% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 20 MHz – 4 GHz. Download the field replaceable high power 100W PE80L2003 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2003 has an average input power of 2 and a military-grade design. In fact, this 4 GHz 100W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, Method 103B, Condition B and vibration of MIL-STD-202F, Method 204D, Condition B. Get in touch with Pasternack’s expert technical support for assistance with the high power 100W PE80L2003 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 20 (MHz) – 4 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 20 MHz – 4 GHz 2 average input power high-reliability broadband limiter will be exact to spec. PE80L2003 has a max leakage of 13 dBm and is part of our vast inventory of electronic products. This SMA female to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power field replaceable 100W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 11 | |
| PE80L2015 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Maximum Insertion Loss: 0.5 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 21.5 dBm. High Power Limiter, SMA, 20W Peak Power, 19 dBm Flat Leakage, 1 GHz to 2 GHz. The PE80L2015 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 20 watts. Our PE80L2015 is a high power coaxial RF power limiter with a maximum insertion loss of 0.5 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 19 dBm and a maximum leakage power of 21.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.35 dB. Our 20 Watt limiter operates in temperatures ranging from -45 to 85 degrees C. Typical input VSWR for this limiter is 1.2:1 and whereas the typical output VSWR is 1.3:1. Our PE80L2015 limiter supports a maximum average input power of 6 W. This high power limiter is 0.51 inches long, 0.39 inches wide, and 0.31 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2012 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 21 GHz, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 20.5 dBm. High Power Limiter, SMA, 10W Peak Power, 18 dBm Flat Leakage, 50 MHz to 21 GHz. The PE80L2012 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 21 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 18 dBm and a maximum leakage power of 20.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.6:1 and whereas the typical output VSWR is 1.8:1. Our PE80L2012 limiter supports a maximum average input power of 4 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2010 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 2 dB, Design Type: High Power, Peak Power: 100 Watt. High Power Limiter, SMA, 100W Peak Power, 16.5 dBm Flat Leakage, 50 MHz to 6 GHz. The PE80L2010 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2010 is a high power coaxial RF power limiter with a maximum insertion loss of 2 dB. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed of copper and has a typical leakage power of 16.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 1.5 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 2:1. Our PE80L2010 limiter supports a maximum average input power of 30 W. This high power limiter is 1.26 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2011 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 18 GHz, Maximum Insertion Loss: 2.1 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 21.5 dBm. High Power Limiter, SMA, 20W Peak Power, 19 dBm Flat Leakage, 1 GHz to 18 GHz. The PE80L2011 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA male to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 20 watts. Our PE80L2011 is a high power coaxial RF power limiter with a maximum insertion loss of 2.1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 18 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 21.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our 20 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 1.8:1. Our PE80L2011 limiter supports a maximum average input power of 6 W. This high power limiter is 0.71 inches long, 0.59 inches wide, and 0.37 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2000 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 6 GHz, Maximum Frequency: 18 GHz, Design Type: High Power, Peak Power: 100 Watt. High Power Limiter, SMA, 100W Peak Power, 12 ns Recovery, 15 dBm Flat Leakage, 6 GHz to 18 GHz. The PE80L2000 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Pasternack SMA to SMA limiter has a minimum frequency of 6 GHz and a maximum frequency of 18 GHz. This high-quality radio frequency limiter has a typical leakage power of 15 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 2.5 dB. Our 100 Watt limiter operates in temperatures ranging from -55 to 85 degrees C. Our PE80L2000 limiter supports a maximum average input power of 10 W. This high power limiter is 1 inches long, 1 inches wide, and 0.5 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2019 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 7.5 GHz, Maximum Frequency: 12.5 GHz, Maximum Insertion Loss: 1 dB, Design Type: High Power, Peak Power: 50 Watt. High Power Limiter, SMA, 50W Peak Power, 18 dBm Flat Leakage, 7.5 GHz to 12.5 GHz. The PE80L2019 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 50 watts. Our PE80L2019 is a high power coaxial RF power limiter with a maximum insertion loss of 1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 7.5 GHz and a maximum frequency of 12.5 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a typical leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.75 dB. Our 50 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.3:1 and whereas the typical output VSWR is 1.5:1. Our PE80L2019 limiter supports a maximum average input power of 10 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2014 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 26 GHz, Maximum Insertion Loss: 2.1 dB, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 18 dBm. High Power Limiter, 2.92mm, 10W Peak Power, 18 dBm Flat Leakage, 2 GHz to 26 GHz. The PE80L2014 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a 2.92mm female to 2.92mm female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Our PE80L2014 is a high power coaxial RF power limiter with a maximum insertion loss of 2.1 dB. Pasternack 2.92mm to 2.92mm limiter has a minimum frequency of 2 GHz and a maximum frequency of 26 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 1.8 dB. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.6:1 and whereas the typical output VSWR is 2.1:1. Our PE80L2014 limiter supports a maximum average input power of 5 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power 2.92mm limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2020 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 0.8 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 21.5 dBm. High Power Limiter, SMA, 50W Peak Power, 18 dBm Flat Leakage, 7.5 GHz to 12.5 GHz. The PE80L2020 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 20 watts. Our PE80L2020 is a high power coaxial RF power limiter with a maximum insertion loss of 0.8 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 18 dBm and a maximum leakage power of 21.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.6 dB. Our 20 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.2:1 and whereas the typical output VSWR is 1.3:1. Our PE80L2020 limiter supports a maximum average input power of 6 W. This high power limiter is 0.51 inches long, 0.39 inches wide, and 0.31 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2016 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 500 MHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 1 dB, Design Type: High Power, Peak Power: 100 Watt, Leakage (CW): 16 dBm. High Power Limiter, SMA, 100W Peak Power, 16 dBm Flat Leakage, 500 MHz to 6 GHz. The PE80L2016 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2016 is a high power coaxial RF power limiter with a maximum insertion loss of 1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 500 MHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 16 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.8 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.8:1 and whereas the typical output VSWR is 2:1. Our PE80L2016 limiter supports a maximum average input power of 50 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 1 | ||
| PE80L2008 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Male, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Design Type: High Power, Peak Power: 100 Watt, Connector Option: Field Replaceable, Leakage (CW): 13 dBm, Recovery Time : 15,000 ns. High Power Limiter, Field Replaceable 2.92mm, 100W Peak Power, 15 us Recovery, 13 dBm Flat Leakage, 26.5 GHz to 40 GHz., Pasternack ships all of our products, including the PE80L2008 high power field replaceable broadband signal limiter same-day, internationally. This 2.92mm series limiter has a maximum peak power of 100W at 10µs Pulse Width 5% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 100W limiter has 2.92mm male to 2.92mm type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2008 high power field replaceable high-power limiter features an impressive typical insertion loss of 3 dB. The PE80L2008 2.92mm to 2.92mm limiter has a typical recovery time of 15,000 nanoseconds. Pasternack’s PE80L2008 100W limiter has a 3 dB typical insertion loss, and a minimum operational temperature range of 0 degrees C to a maximum of 50°C. PE80L2008 is a RF high power 100W at 10µs Pulse Width 5% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality 2.92mm to 2.92mm limiters that we ship around the world, have a broadband frequency of 26.5 GHz – 40 GHz. Download the field replaceable high power 100W PE80L2008 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2008 has an average input power of 1 and a military-grade design. In fact, this 40 GHz 100W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, Method 103B, Condition B and vibration of MIL-STD-202F, Method 204D, Condition B. Get in touch with Pasternack’s expert technical support for assistance with the high power 100W PE80L2008 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 26.5 (GHz) – 40 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 26.5 GHz – 40 GHz 1 average input power high-reliability broadband limiter will be exact to spec. PE80L2008 has a max leakage of 13 dBm and is part of our vast inventory of electronic products. This 2.92mm male to 2.92mm limiter is ready for purchase and ships anywhere in the world. Order your high power field replaceable 100W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 0 | ||
| PE80L2004 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 8 GHz, Maximum Frequency: 12 GHz, Maximum Insertion Loss: 1.2 dB, Design Type: High Power, Peak Power: 100 Watt, Connector Option: Field Replaceable, Leakage (CW): 18 dBm, Recovery Time : 15,000 ns. High Power Limiter, Field Replaceable SMA, 100W Peak Power, 15 us Recovery, 18 dBm Flat Leakage, 8 GHz to 12 GHz., Pasternack ships all of our products, including the PE80L2004 high power field replaceable broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 100W at 10µs Pulse Width 5% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 100W limiter has SMA female to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2004 high power field replaceable high-power limiter features an impressive maximum insertion loss of 1.2 dB. The PE80L2004 SMA to SMA limiter has a typical recovery time of 15,000 nanoseconds. Pasternack’s PE80L2004 100W limiter has a 1.2 dB maximum insertion loss, and a minimum operational temperature range of 0 degrees C to a maximum of 50°C. PE80L2004 is a RF high power 100W at 10µs Pulse Width 5% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 8 GHz – 12 GHz. Download the field replaceable high power 100W PE80L2004 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2004 has an average input power of 3 and a military-grade design. In fact, this 12 GHz 100W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, Method 103B, Condition B and vibration of MIL-STD-202F, Method 204D, Condition B. Get in touch with Pasternack’s expert technical support for assistance with the high power 100W PE80L2004 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 8 (GHz) – 12 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 8 GHz – 12 GHz 3 average input power high-reliability broadband limiter will be exact to spec. PE80L2004 has a max leakage of 18 dBm and is part of our vast inventory of electronic products. This SMA female to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power field replaceable 100W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 0 | ||
| PE80L2002 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 18 GHz, Maximum Frequency: 40 GHz, Maximum Insertion Loss: 4 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 18 dBm. High Power Limiter, 2.92mm, 20W Peak Power, 10 ns Recovery, 18 dBm Flat Leakage, 18 GHz to 40 GHz., Pasternack ships all of our products, including the PE80L2002 high power broadband signal limiter same-day, internationally. This 2.92mm series limiter has a maximum peak power of 20W at 1us pulse, 0.1% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 20W limiter has 2.92mm female to 2.92mm type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2002 high power high-power limiter features an impressive maximum insertion loss of 4 dB. The PE80L2002 2.92mm to 2.92mm limiter has a maximum recovery time of 10 nanoseconds. Pasternack’s PE80L2002 20W limiter has a 4 dB maximum insertion loss, and a minimum operational temperature range of -54 degrees C to a maximum of 85°C. PE80L2002 is a RF high power 20W at 1us pulse, 0.1% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality 2.92mm to 2.92mm limiters that we ship around the world, have a broadband frequency of 18 GHz – 40 GHz. Download the high power 20W PE80L2002 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2002 has an average input power of 1 and a military-grade design. In fact, this 40 GHz 20W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, METHOD 103B COND. B and vibration of MIL-STD-202F, METHOD 204D COND. B. Get in touch with Pasternack’s expert technical support for assistance with the high power 20W PE80L2002 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 18 (GHz) – 40 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 18 GHz – 40 GHz 1 average input power high-reliability broadband limiter will be exact to spec. PE80L2002 has a max leakage of 18 dBm and is part of our vast inventory of electronic products. This 2.92mm female to 2.92mm limiter is ready for purchase and ships anywhere in the world. Order your high power 20W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 0 | ||
| PE80L2001 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 18 GHz, Maximum Insertion Loss: 2 dB, Design Type: High Power, Peak Power: 200 Watt, Leakage (CW): 14 dBm. High Power Limiter, SMA, 200W Peak Power, 100 ns Recovery, 14 dBm Flat Leakage, 2 GHz to 18 GHz., Pasternack ships all of our products, including the PE80L2001 high power broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 200W at 1us pulse, 0.1% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 200W limiter has SMA male to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2001 high power high-power limiter features an impressive maximum insertion loss of 2 dB. The PE80L2001 SMA to SMA limiter has a maximum recovery time of 100 nanoseconds. Pasternack’s PE80L2001 200W limiter has a 2 dB maximum insertion loss, and a minimum operational temperature range of -55 degrees C to a maximum of 125°C. PE80L2001 is a RF high power 200W at 1us pulse, 0.1% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 2 GHz – 18 GHz. Download the high power 200W PE80L2001 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2001 has an average input power of 1 and a military-grade design. In fact, this 18 GHz 200W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202F, METHOD 103B COND. B and vibration of MIL-STD-202F, METHOD 204D COND. B. Get in touch with Pasternack’s expert technical support for assistance with the high power 200W PE80L2001 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 2 (GHz) – 18 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 2 GHz – 18 GHz 1 average input power high-reliability broadband limiter will be exact to spec. PE80L2001 has a max leakage of 14 dBm and is part of our vast inventory of electronic products. This SMA male to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power 200W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 0 | ||
| PE80L2009 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 500 MHz, Maximum Frequency: 18 GHz, Maximum Insertion Loss: 2 dB, Design Type: High Power, Peak Power: 20 Watt, Connector Option: Field Replaceable, Leakage (CW): 18 dBm. High Power Limiter, Field Replaceable SMA, 20W Peak Power, 18 dBm Flat Leakage, 500 MHz to 18 GHz., Pasternack ships all of our products, including the PE80L2009 high power field replaceable broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 20W and Pasternack aims to keep our product inventory consistently stocked. The 20W limiter has SMA male to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE80L2009 high power field replaceable high-power limiter features an impressive maximum insertion loss of 2 dB. The PE80L2009 SMA to SMA limiter has a typical recovery time of nanoseconds. Pasternack’s PE80L2009 20W limiter has a 2 dB maximum insertion loss, and a minimum operational temperature range of 0 degrees C to a maximum of 50°C. PE80L2009 is a RF high power 20W limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 500 MHz – 18 GHz. Download the field replaceable high power 20W PE80L2009 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE80L2009 has an average input power of 2 and a military-grade design. In fact, this 18 GHz 20W high-rel limiter meets the US Department of Defense environmental test methods for humidity of MIL-STD-202, Method 103B, Condition B and vibration of MIL-STD-202F, Method 204D, Condition B. Get in touch with Pasternack’s expert technical support for assistance with the high power 20W PE80L2009 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 500 (MHz) – 18 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 500 MHz – 18 GHz 2 average input power high-reliability broadband limiter will be exact to spec. PE80L2009 has a max leakage of 18 dBm and is part of our vast inventory of electronic products. This SMA male to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power field replaceable 20W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 0 | ||
![]() Sager | 0680L2000-01 | Bel Power Solutions | Surface Mount Fuses SM 2410 Slow Blow, 2A |
| 0 | |
| MMSD-08-20-L-20.00-D-K-LDX | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSD-10-20-L-20.00-D-K-MUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSS-05-30-L-20.00-D-K-LDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| ITV9550L2060MR | Littelfuse Inc | ITV 9.5*5.0MM 20V 60A RoHS : Compliant | 0 | |||
| PESS-06-10-L-20.00-SR | Samtec Inc | Rectangular Cable Assemblies .250 PowerStrip/40 A Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| MMSD-15-20-L-20.00-D-K-LDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-15-30-L-20.00-D-K-LDX | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-18-20-L-20.00-D-K-LUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSS-13-20-L-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSST-02-20-L-20.00-D-K-LUS | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, Teflon Cable, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 0680L2000-15 | Bel Power Solutions | Surface Mount Fuses SM 2410 Slow Blow, 2A | 0 | |||
| CSSA8436M00L20JT0 | Eaton Bussmann | Eaton Corporation 8436,30W,200uOhm,5% |
| 0 | ||
| S2SDT-05-30-L-20.00-D-NUX | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-12-30-L-20.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
![]() Vyrian | 7280L20PA![]() | Integrated Device Technology Inc | FIFO, 512X9, 20ns, Asynchronous, CMOS, PDSO56 RoHS : Not Compliant | 12,677 | ||
| 0680L2000-15 | Bel Fuse | Electric Fuse, Time Lag Blow, 2A, 125VAC, 125VDC, 50A (IR), Surface Mount, 2410 RoHS : Compliant | 11,834 | |||
| ACPL-5700L-200 | Broadcom Limited | Logic IC Output Optocoupler, 1-Channel, 1-Element, 1500V Isolation RoHS : Not Compliant | 8,008 | |||
BLS7G2730L-200PU![]() | NXP Semiconductors | Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 7,931 | |||
| ACPL-5730L-200 | Broadcom Limited | Logic IC Output Optocoupler, 2-Channel, 2-Element, 1500V Isolation RoHS : Not Compliant | 7,704 | |||
| ACPL-1770L-200 | Broadcom Limited | Logic IC Output Optocoupler, 4-Channel, 4-Element, 1500V Isolation RoHS : Not Compliant | 4,188 | |||
| ACPL-5630L-200 | Broadcom Limited | Logic IC Output Optocoupler, 2-Element, 1500V Isolation RoHS : Not Compliant | 3,210 | |||
| MS3470L20-39SW-LC | Souriau-sunbank Connection Technologies | MIL Series Connector, 39 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 894 | |||
| MS3470L20-39SY | Defense Logistics Agency | MIL Series Connector, 39 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 891 | |||
| MS3470L20-39SZ | Defense Logistics Agency | MIL Series Connector, 39 Contact(s), Aluminum Alloy, Female, Receptacle | 883 | |||
| MS3470L20-39SW | Defense Logistics Agency | MIL Series Connector, 39 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 780 | |||
| MS3470L20-41PY | Defense Logistics Agency | MIL Series Connector, 41 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 325 | |||
| MS3470L20-39SX-LC | Souriau-sunbank Connection Technologies | MIL Series Connector, 39 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 276 | |||
| MS3450L20-15PW | Defense Logistics Agency | 7 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 267 | |||
| MS3470L20-41PX-LC | Souriau-sunbank Connection Technologies | MIL Series Connector, 41 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 210 | |||
![]() Win Source Electronics | 2920L200DR | Littelfuse Inc | PTC RESETTABLE 15V 2A SMD 2920 RoHS : Compliant |
| 30,000 | |
| 2920L200/24DR | Littelfuse Inc | PTC RESETTABLE 24V 2A SMD 2920 RoHS : Compliant |
| 20,000 | ||
| ACT1210L-201-2P-TL00 | TDK Corporation | CMC 200UH 70MA 2LN SMD AEC-Q200 RoHS : Compliant |
| 20,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |