Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  



10103CC02T-XCFDB Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Rochester Electronics
MC10103P

onsemi Logic IC OR Gate 4 16-DIP Rail
RoHS : Not Compliant
10,000 : $1.09
1,000 : $1.16
500 : $1.22
100 : $1.29
25 : $1.36
1,197
JM38510/10304BGA

Analog Devices Inc Comparator, 1 Func, 3000uV Offset-Max, 200ns Response Time, BIPolar, MBCY8
RoHS : Not Compliant
10,000 : $16.84
1,000 : $17.89
500 : $18.95
100 : $20.0
25 : $21.05
77
DS1010-300

Maxim Integrated Products Silicon Delay Line, 1-Func, 10-Tap, True Output, CMOS, PDIP14
RoHS : Not Compliant
10,000 : $3.47
1,000 : $3.69
500 : $3.91
100 : $4.12
25 : $4.34
1,229
JM38510/10103BCA

National Semiconductor Corporation Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant
10,000 : $22.52
1,000 : $23.93
500 : $25.34
100 : $26.74
25 : $28.15
2

Ameya Holding Limited
VMK3-1010-32K7680000

Microchip Technology Inc XTAL 32.768KHZ 12.5PF 20PPM ESR 50KOHM S
RoHS : Compliant
8,214
M38510/10304BCA

Microchip Technology Inc
170
M38510/10304BPA

Texas Instruments CDIP 8/M°/Differential Comparator With Strobes
RoHS : Not Compliant
107
M38510/10103BGA

Texas Instruments
RoHS : Compliant
102
JM38510/10103BGA

Texas Instruments
RoHS : Compliant
39

ComSIT USA
CR10103JK

ASJ Holdings Limited GENERAL PURPOSE THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 10000ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402
RoHS : Compliant
50,000
BFC233810103

Vishay Intertechnologies Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
RoHS : Not Compliant
5,500
PT10LV10103A2020PMS

Amphenol Piher TRIMMPOTENTIOMETER, 10K, 0.15W, 1GANG
RoHS : Compliant
5,000
PTC10LV10103A2020

Amphenol Piher 10 MM CERMET POTENTIOMETER Trimmer, Cermet, 0.33W, 10000ohm, 20% +/-Tol, 1 Turn(s)
RoHS : Compliant
400
31010320

Schurter Electronic Components Fuse Holder Holder Cartridge 16A Panel Mount
RoHS : Compliant
100
JM3851010304BGA

National Semiconductor Corporation VOLTAGE COMPARATOR Comparator, 1 Func, 3000uV Offset-Max, 640ns Response Time, BIPolar, MBCY8
RoHS : Not Compliant
15

Avnet Silica
M38510/10304BGX

Teledyne HiRel Quad operational amplifier medium power (Alt: M38510/10304BGX)
RoHS : Compliant
0
M38510/10301BGA

Teledyne HiRel E2VM3851010301BGA (Alt: M38510/10301BGA)
RoHS : Not Compliant
0
M38510/10301BGA

Teledyne HiRel E2VM3851010301BGA (Alt: M38510/10301BGA)
RoHS : Not Compliant
0
DSPIC30F1010-30I/SP

Microchip Technology Inc (Alt: DSPIC30F1010-30I/SP)
RoHS : Compliant
0
DSPIC30F1010-30I/SO

Microchip Technology Inc (Alt: DSPIC30F1010-30I/SO)
RoHS : Compliant
0
R7F7010103AFP-C#AA4

Renesas Electronics Corporation IC MCU 32BIT 512KB FLASH 48LQFP (Alt: R7F7010103AFP-C#AA4)
RoHS : Compliant
0
DSPIC30F1010-30I/MM

Microchip Technology Inc (Alt: DSPIC30F1010-30I/MM)
RoHS : Compliant
0

Braemac Americas-Symmetry
ASPIAIG-Q1010-3R3M-T

Abracon Corporation
RoHS : Compliant
1 : $2.1875
0
ASPI-F1010-3R3M-T

Abracon Corporation
RoHS : Compliant
1 : $1.75
0

EBV Elektronik
DSPIC30F1010-30I/SP

Microchip Technology Inc (Alt: DSPIC30F1010-30I/SP)
RoHS : Compliant
0
DSPIC30F1010-30I/SO

Microchip Technology Inc (Alt: DSPIC30F1010-30I/SO)
RoHS : Compliant
0

Master Electronics
1010352000

ITT Interconnect Solutions D-Sub Standard Connectors MSE/R 18-15S INSERT
RoHS : Compliant
500 : $8.41
250 : $10.18
100 : $10.39
50 : $12.39
25 : $12.57
10 : $12.76
5 : $13.07
161
1.30.074.101/0301

RAFI GmbH & Co Kg RAFIX 16 - Emergency stop pushbutton square collar dupe-proof
RoHS : Compliant
250 : $28.6
100 : $31.2
50 : $34.07
26 : $35.12
10 : $36.66
6 : $37.49
2 : $39.25
83
101-0356-000

ITT Interconnect Solutions 1010356000; MIL-DTL 5015 Series I; Circular
RoHS : Compliant
250 : $20.06
100 : $31.13
50 : $44.17
25 : $45.08
10 : $46.06
5 : $46.77
1 : $49.63
9
71-01-03

Master Appliance Corp Spade Tip
RoHS : Compliant
1 : $17.4
2
SSW-101-03-G-P-RA

Samtec Inc .025 Socket Strips; |Samtec Inc. SSW-101-03-G-P-RA
RoHS : Compliant
7,500 : $0.3689
5,000 : $0.3699
2,500 : $0.5
1,000 : $0.5821
500 : $0.7761
250 : $0.8125
25 : $1.0
0
TMM-101-03-SM-D

Samtec Inc Conn Unshrouded Header HDR 2 POS Solder ST Thru-Hole
RoHS : Compliant
15,000 : $0.137
10,000 : $0.1408
7,500 : $0.1429
5,000 : $0.1493
2,500 : $0.209
1,000 : $0.25
500 : $0.3438
100 : $0.4231
0
FW-03-03-F-D-210-103

Samtec Inc .050 Flex Stack Flexible Micro Board Stacker Surface Mount
RoHS : Compliant
7,500 : $0.613
5,000 : $0.63
2,500 : $0.795
1,000 : $0.886
500 : $1.209
250 : $1.266
25 : $1.558
0
FCA-210-1031L

TE Connectivity Electromechanical Relay 28VDC 320Ohm 10A DPDT (26.04x13.08x25.65)mm Flange Military Relay MOQ Reduction
RoHS : Not Compliant
10 : $223.43
8 : $227.98
5 : $307.19
3 : $415.98
0
SSW-101-03-F-P

Samtec Inc Conn Socket Strip SKT 1 POS Solder ST Thru-Hole
RoHS : Compliant
7,500 : $0.2329
5,000 : $0.2394
2,500 : $0.3143
1,000 : $0.3906
250 : $0.5323
50 : $0.6346
0
SSW-101-03-G-S-001

Samtec Inc
RoHS : Compliant
10,000 : $0.4
7,500 : $0.4099
5,000 : $0.411
2,500 : $0.5143
1,000 : $0.5821
500 : $0.7612
250 : $0.7969
25 : $0.9808
0
SSW-101-03-G-S-RA

Samtec Inc Single Row 4.7A Gold -55鈩儈+125鈩 1P Bend insert 2.41mm Push-Pull Female Headers ROHS
RoHS : Compliant
10,000 : $0.3041
7,500 : $0.3307
5,000 : $0.3315
2,500 : $0.4352
1,000 : $0.5045
500 : $0.664
250 : $0.6656
50 : $0.8192
0
SSQ-101-03-S-S-RA

Samtec Inc Conn Socket Strip SKT 1 POS Solder RA Thru-Hole
RoHS : Compliant
7,500 : $0.3416
5,000 : $0.3425
2,500 : $0.4507
1,000 : $0.5224
500 : $0.717
250 : $0.7188
50 : $0.8846
0
T1610103225-000

TE Connectivity H10B-SGR-LB-2M25
RoHS : Compliant
500 : $10.98
250 : $12.26
100 : $13.46
50 : $14.78
25 : $15.14
10 : $15.6
5 : $16.36
0
PHF-101-03-L-S

Samtec Inc .100 Socket Strip Press-Fit
RoHS : Compliant
10,000 : $0.2849
7,500 : $0.3618
5,000 : $0.3699
2,500 : $0.4634
1,000 : $0.5239
500 : $0.692
250 : $0.6937
50 : $0.8538
0
PT9101-0300-111-4150

TE Connectivity PT9101-0300-111-4150
RoHS : Compliant
5 : $1,921.87
3 : $1,993.05
1 : $2,047.65
0

Pasternack Enterprises US
PE910103

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Gold, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Gold. Commercial Grade RP-SMA Female to RP-SMA Female Adapter., The commercial grade SMA adapter PE910103 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.35:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our reverse polarity SMA to reverse polarity SMA adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 6 GHz. This SMA reverse polarity female to SMA reverse polarity female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910103 female SMA to female SMA adapter has a straight body. This Pasternack SMA to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 0.6-inch length, 0.69-inch width, and 0.05 lbs weight. The PE910103 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our SMA reverse polarity female to SMA reverse polarity female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This commercial grade RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of reverse polarity SMA to reverse polarity SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 6 GHz RF adapter that meets your requirements.
1 : $19.49
5 : $19.1
10 : $18.71
25 : $18.32
146
PEWAT1010-30

Pasternack Enterprises Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 30 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 30 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-30 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-30 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 30 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 30 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-30 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 30 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 30 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 30 dB PEWAT1010-30 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 30 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
1
PEWAT1010-3

Pasternack Enterprises Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 3 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 3 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-3 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-3 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 3 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 3 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-3 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 3 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 3 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 3 dB PEWAT1010-3 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 3 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz.
1 : $1,200.0
5 : $1,152.0
10 : $1,104.0
25 : $1,056.0
1
PE3C10103

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to N Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
0
PE3C10103-12

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-12 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-12 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27
0
PE3C10103-18

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-18 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-18 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $152.99
25 : $145.34
50 : $137.69
100 : $131.57
0
PE3C10103-24

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-24 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-24 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $157.99
25 : $150.09
50 : $142.19
100 : $135.87
0
PE3C10103-6

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-6 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-6 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
0
PE3C10103-9

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to N Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-9 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-9 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $144.99
25 : $137.74
50 : $130.49
100 : $124.69
0

Venkel Ltd.
TRCR1210-103MT

VENKEL LTD Trimmable CR;1210;10K;�20%
RoHS : Compliant
0

Vyrian
UE36-A1010-3000T

Amphenol Communications Solutions Telecom and Datacom Connector, 76 Contact(s), Female, Right Angle, Surface Mount Terminal, Plug
17,432
XAL1510-103MED

Coilcraft Inc General Purpose Inductor, 10uH, 20%, 1 Element, Composite-Core, SMD, 6460
RoHS : Compliant
15,465
M38510/10103SGX

Analog Devices Inc Operational Amplifier, 1 Func, 3000uV Offset-Max, MBCY8
10,879
XFL2010-103MEC

Coilcraft Inc General Purpose Inductor, 10uH, 20%, 1 Element, Composite-Core, SMD, 2010
RoHS : Compliant
9,617
M38510/10103BGX

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, MBCY8
8,967
M38510/10103SHA

Analog Devices Inc Operational Amplifier, 1 Func, 3000uV Offset-Max, CDFP10
RoHS : Not Compliant
8,624
M38510/10103BCA

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant
7,628
M38510/10103BPA

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, CDIP8
RoHS : Not Compliant
6,272
M38510/10103BC

Texas Instruments Operational Amplifier
5,654
XGL1010-332MED

Coilcraft Inc General Purpose Inductor, 3.3uH, 20%, 1 Element, Composite-Core, SMD, 4439
RoHS : Compliant
5,061
M38510/10103SGA

Analog Devices Inc Operational Amplifier, 1 Func, 3000uV Offset-Max, MBCY8
RoHS : Not Compliant
5,002
M38510/10103BPX

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, CDIP8
5,001
M38510/10103BP

Texas Instruments Operational Amplifier
4,802
M38510/10103BCX

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, CDIP14
3,783
M38510/10103BGA

Texas Instruments Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, MBCY8
RoHS : Compliant
3,435

Waytek, Inc.
10103MT

Hillsdale Terminal & Tool Inc Non-Insulated 16-14 Ga, Ring Terminal, 3/8" Stud, Reel (1,000 pcs = 1 Reel)
1,000 : $0.0809
5,000 : $0.0738
2,000
10103

Hillsdale Terminal & Tool Inc Uninsulated Ring Terminal 16-14 Gauge, 3/8" Stud
100 : $0.1034
200 : $0.0938
500 : $0.0839
1,000 : $0.076
5,000 : $0.0725
414

Win Source Electronics
10103594-0001LF

Amphenol FCi CONN RCPT STD MICRO USB TYPE B
RoHS : Compliant
1,145 : $0.263
915 : $0.2736
705 : $0.2843
495 : $0.3057
320 : $0.3164
150 : $0.3378
21,450

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com