Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  



1012G-52-AF5-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Rutronik
CR10-101-JK

ASJ Holdings Limited RC0402 100R 5% 0,063W TK100
RoHS : Compliant
10,000 : $7.0E-4
40,000 : $6.0E-4
50,000 : $5.0E-4
300,000 : $5.0E-4
2,400,000
CR10-5101-FK

ASJ Holdings Limited RC0402 5,1K 1% 0,063W TK100
RoHS : Compliant
10,000 : $9.0E-4
30,000 : $7.0E-4
50,000 : $7.0E-4
300,000 : $7.0E-4
1,420,000
CC0603JRNPO0BN101

YAGEO Corporation KC 100pF 0603 5% 100V NP0
RoHS : Compliant
4,000 : $0.0051
12,000 : $0.0051
20,000 : $0.0051
40,000 : $0.005
80,000 : $0.005
416,000
CR10-1101-FK

ASJ Holdings Limited RC0402 1,1K 1% 0,063W TK100
RoHS : Compliant
10,000 : $9.0E-4
30,000 : $7.0E-4
50,000 : $7.0E-4
300,000 : $7.0E-4
50,000
CR10-120-JK

ASJ Holdings Limited RC0402 12R 5% 0,063W TK100
RoHS : Compliant
10,000 : $7.0E-4
40,000 : $6.0E-4
50,000 : $5.0E-4
300,000 : $5.0E-4
50,000
SET004010101022

Amphenol Communications Solutions 40P SLIM COOL EDGE CONN 0,80MM
RoHS : Compliant
500 : $1.91
1,000 : $1.85
1,500 : $1.81
2,000 : $1.74
2,500 : $1.68
17,000
3101.0110

Schurter Electronic Components FPG1 Holder IP67 Solderlug Slot
RoHS : Compliant
100 : $1.87
200 : $1.76
400 : $1.74
600 : $1.74
800 : $1.71
9,000
350-10-105-00-001101

PRECI-DIP SSA 05P Pin Header STR 1R 2.54mm
RoHS : Compliant
1 : $0.6809
3 : $0.6809
9 : $0.6809
28 : $0.6809
85 : $0.6809
8,750
299-87-210-10-001101

PRECI-DIP SSA 10P DIL Socket R/A CLOSED FRAME
RoHS : Compliant
42 : $3.13
84 : $3.01
168 : $2.95
252 : $2.84
294 : $2.74
4,618
C10-101949-010

Amphenol Interconnect Products Inc GASKET FLAT for ELECTRICAL CONNECTOR
RoHS : Compliant
100 : $0.15
4,100
AMJ-1 88-10101-CAT6

ASSMANN WSW components GmbH RJ45 Modular_Jack Shielded CAT6
RoHS : Compliant
70 : $2.91
140 : $2.85
210 : $2.83
280 : $2.81
420 : $2.75
3,360
AC1210-101-C

Pulse Electronics Corporation AC1210 2x100uH
RoHS : Compliant
3,000 : $0.329
3,000
AC1210-101-D

Pulse Electronics Corporation AC1210 2x100uH
RoHS : Compliant
3,000 : $0.344
3,000
10114830-10102LF

Amphenol Communications Solutions 1,25MM WTB WAFER RA STM 2P
RoHS : Compliant
1,300 : $0.13
2,600
803-87-010-10-001101

PRECI-DIP SSA 10P Female Header 2R STR THT
RoHS : Compliant
1 : $1.0029
3 : $0.9643
8 : $0.9489
23 : $0.9103
66 : $0.8795
113

DB Roberts
2531-1011-0127-12.75

Tech-Etch
26
101

HH Smith BAN JK ASSY 101 UNINSUL
1 : $0.9512
2 : $0.9512
2
101

Essentra Components
0
E3-1010-101

Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
2511-1011-0101-7.09

Tech-Etch 2511-1011-0101-7.09
0
R4-10-10-101-20

Southco These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging
0
R4-10-10-101-10

Southco These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging
0
E3-101-1012

Southco E3-101-1012
0
E3-1010-1706

Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
E3-1010-1006

Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
E3-1011-015

Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
E3-1010-132

Southco E3-1010-132
0
E3-1010-1906

Southco The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic
0
E5-1-015-101

Southco These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit
0
110110100

Essentra Components LATCH, CAM T HANDLE LOCK - KEY
0

Pasternack Enterprises US
PE910101

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Right Angle, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade N Male to N Female Right Angle Adapter., The commercial grade type N right angle adapter PE910101 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to female gender configuration, which provides easier connections in tighter spaces. This type N male to type N female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910101 male type N to female type N adapter has a right angle body. This type N coax adapter is a 90 degree right angle RF elbow adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.42-inch length, 1.35-inch width, and 2.4 lbs weight. The PE910101 adapter from Pasternack is made from a brass connector body and has a nickel center contact. Our type N male to type N female right angle radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This commercial grade RF adapter has an operating temperature range of -55 to 85 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of right angle type N to type N radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements.
1 : $17.59
5 : $17.24
10 : $16.89
25 : $16.53
1,588
PE3FCA110-1M

Pasternack Enterprises Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM5, 2.0mm Riser cable, Lime Green-1M. Pasternack’s PE3FCA110-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our lime green fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA110-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements.
1 : $24.99
5 : $23.99
10 : $22.99
25 : $21.99
336
PE3FCA210-15M

Pasternack Enterprises Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OM1 Multimode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Orange-15M. Pasternack’s PE3FCA210-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA210-15M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements.
1 : $149.99
5 : $143.99
10 : $137.99
25 : $131.99
138
PE3CA1010-12

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-137mm, RF Cable Type: 1.37mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Female Bulkhead to UMCX 2.5 Plug Cable 12 Inch Length Using 1.37mm Coax, RoHS., Radio frequency assembly N female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.37mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.37mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our type N to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This N type to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1010-12, can also be known as a type N jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Type N jack to UMCX 2.5 male cable assembly PE3CA1010-12 is built with 1.37mm which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency type N female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1010-12 can also be used in the other direction and will be UMCX 2.5 plug to N type female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to UMCX 2.5 plug cable 12 inch length using 1.37mm coax, RoHS.
1 : $27.39
25 : $26.02
50 : $24.65
100 : $23.56
28
PEWAT1010-10

Pasternack Enterprises Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 10 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 10 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-10 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-10 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 10 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 10 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-10 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 10 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 10 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 10 dB PEWAT1010-10 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 10 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz.
1 : $1,560.0
5 : $1,497.6
10 : $1,435.2
25 : $1,372.8
1
PE3C10101-6

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to N Male Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-6 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-6 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
0
PE3C10101-9

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to N Male Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-9 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-9 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81
0
PE3C10101-18

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Male Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-18 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-18 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55
0
PE3C10101-24

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Male Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-24 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-24 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71
0
PE3W10101

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. QD SMA Male to BNC Female Bulkhead Cable Using RG400 Coax. PE3W10101 is a SMA male to BNC female bulkhead cable using RG400 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10101 SMA male to BNC female bulkhead cable assembly is constructed with RG400 coax.
0
PE3C10101

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to N Male Cable Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
0
PE3C10101-12

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10101-12 can also be known as a 2.92mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10101-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10101-12 can also be used in the other direction and will be type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39
0
PE3C10131

Pasternack Enterprises
0
PE3C10168

Pasternack Enterprises
0
PE3C3810-12

Pasternack Enterprises
1 : $380.99
25 : $361.94
50 : $342.89
100 : $327.65
0

Teledyne HiRel
M38510/10101BHA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10101BCA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10101BPA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10101B2A

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10101BGA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10103B2A

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10102BCA

Teledyne HiRel OP AMP, GENERAL PURPOSE, DUAL
RoHS : Not Compliant
0
M38510/10103BPA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10103BHA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10102BDA

Teledyne HiRel OP AMP, GENERAL PURPOSE, DUAL
RoHS : Not Compliant
0
M38510/10103BGA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10105BFA

Teledyne HiRel OP AMP, DUAL
RoHS : Not Compliant
0
M38510/13101BPA

Teledyne HiRel OP AMP, LOW-NOISE
RoHS : Not Compliant
0
M38510/10103BCA

Teledyne HiRel OP AMP, GENERAL PURPOSE
RoHS : Not Compliant
0
M38510/10102BIA

Teledyne HiRel OP AMP, GENERAL PURPOSE, DUAL
RoHS : Not Compliant
0

Venkel Ltd.
C0805X7R101-101MNE

VENKEL LTD Chip Capacitor;0805;X7R;100V;100pF;�20%
RoHS : Compliant
10,000
C0603X7R101-101JNP

VENKEL LTD Chip Capacitor;0603;X7R;100V;100pF;�5%
RoHS : Compliant
0
C0603X7R101-101KNE

VENKEL LTD Chip Capacitor;0603;X7R;100V;100pF;�10%
RoHS : Compliant
0
C0805HQN101-101JNP

VENKEL LTD High-Q NP0 Chip Capacitor;0805;HQN;100V;100pF;�5%
RoHS : Compliant
0
C0805C0G101-101GPE

VENKEL LTD Chip Capacitor;0805;C0G;100V;100pF;�2%;Pd
RoHS : Compliant
0
AGC0603X7R101-101KNP

VENKEL LTD Auto Grade Capacitor;0603;X7R;100V;100pF;�10%
RoHS : Compliant
0
C0603C0G101-101GNP

VENKEL LTD Chip Capacitor;0603;C0G;100V;100pF;�2%
RoHS : Compliant
0
C0805C0G101-101KPP

VENKEL LTD Chip Capacitor;0805;C0G;100V;100pF;�10%;Pd
RoHS : Compliant
0
AGC0402C0G101-101JNP

VENKEL LTD Auto Grade Capacitor;0402;C0G;100V;100pF;�5%
RoHS : Compliant
0
C0603C0G101-101KNP

VENKEL LTD Chip Capacitor;0603;C0G;100V;100pF;�10%
RoHS : Compliant
0
C0805C0G101-101GNP

VENKEL LTD Chip Capacitor;0805;C0G;100V;100pF;�2%
RoHS : Compliant
0
C1111HQN101-101FNE

VENKEL LTD High-Q NP0 Capacitor;1111;HQN;100V;100pF;�1%
RoHS : Compliant
0
AGC0805C0G101-101JNP

VENKEL LTD Auto Grade Capacitor;0805;C0G;100V;100pF;�5%
RoHS : Compliant
0
C0402C0G101-101JNP

VENKEL LTD Chip Capacitor;0402;C0G;100V;100pF;�5%
RoHS : Compliant
0
C0505HQN101-101FNE

VENKEL LTD High-Q NP0 Capacitor;0505;HQN;100V;100pF;�1%
RoHS : Compliant
0

Waytek, Inc.
10105B1015-0

Unified Wire and Cable Inc 10GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.9182
500 : $0.6696
1,000 : $0.5768
2,000 : $0.4939
25,500
10/1 UL1015 YELLOW

Unified Wire and Cable Inc 10GA Yellow MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.9182
500 : $0.6696
1,000 : $0.5768
2,000 : $0.4939
16,500
10/1 UL1015 GREEN

Unified Wire and Cable Inc 10GA Green MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.9182
500 : $0.6696
1,000 : $0.5768
2,000 : $0.4939
15,100
10/1 UL1015 BLUE

Unified Wire and Cable Inc 10GA Blue MTW/AWM Wire Bare Copper 600V,1000V UL 1015/1230/1032 CSA TEW
250 : $0.4939
500 : $0.4408
1,000 : $0.4243
2,000 : $0.4144
15,000
10/1 UL1015 WHITE

Unified Wire and Cable Inc 10GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.4939
500 : $0.4408
1,000 : $0.4243
2,000 : $0.4144
13,000
1626T1015-5

Unified Wire and Cable Inc 16GA Green MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.2606
500 : $0.2126
1,000 : $0.1797
2,500 : $0.1552
5,000 : $0.1393
12,750
10101

Hillsdale Terminal & Tool Inc Uninsulated Ring Terminal 16-14 Gauge, 1/4" Stud
100 : $0.0732
200 : $0.0664
500 : $0.0594
1,000 : $0.0538
5,000 : $0.0513
11,825
10/1 UL1015 RED

Unified Wire and Cable Inc 10GA Red MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.9182
500 : $0.6696
1,000 : $0.5768
2,000 : $0.4939
10,750
1441T1015-8

Unified Wire and Cable Inc 14GA Gray MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW
250 : $0.2074
500 : $0.1839
1,000 : $0.177
1,500 : $0.1729
5,000 : $0.1687
10,500
10101MT

Hillsdale Terminal & Tool Inc Non-Insulated 16-14 Ga, Ring Terminal, 1/4" Stud, Reel (2,000 pcs = 1 Reel)
2,000 : $0.0594
10,000 : $0.0541
2,000
TPS101010

Thomas & Betts Thomas & Betts Harnessflex YPS101010 hinged Y fitting is a conduit branch fitting with .350" left, center, and right openings for corrugated loom routing. Its hinged Y design supports smooth harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.
1 : $4.6458
50 : $4.1412
100 : $3.7584
200 : $3.6366
500 : $3.5148
1,000 : $3.3756
969
YPS101010

Thomas & Betts Thomas & Betts Harnessflex YPS101010 hinged Y fitting is a conduit branch fitting with .350" left, center, and right openings for corrugated loom routing. Its hinged Y design supports smooth harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.
1 : $4.2453
50 : $3.7842
100 : $3.4344
200 : $3.3231
500 : $3.2118
1,000 : $3.0846
959
0011010168

Molex Molex MLX Extraction TOOL 0011010168 REPLACED PN 534 TYCO 1804030-1
RoHS : Compliant
1 : $51.73
10 : $48.52
65
U-6701-0101

Unity Manufacturing Co Ltd Unity Replacement Handle & Housing Assembly U-6701-0101
1 : $48.87
5 : $46.24
10 : $44.67
50 : $42.57
100 : $40.47
29
1016

Blue Sea Systems Dual USB Charger Socket **RETAIL**
1 : $28.43
10 : $28.43
25

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com