1075-R36 Price, Distributor, Stock

Lens for LED high power; mid power; COB; angle: 16 do 35 degrees ; Number of LEDs: 1; Dimensions: round 30mm; Height: 14.3mm; material: PC; Fastening: snaps

5,000 : $1.768
2,520 : $1.813
1,000 : $1.84
520 : $1.929
120 : $2.471
10 : $2.669
1 : $3.929

180

C10756_CUTE-3-W

LEDIL

LEDIL LENS CUTE3-W-10756, Wide, for XM-L HVW/XT-E HVW/XM-L2/XP-G2/XP-L/XT-E/XP-E/XM-L/XP-G, RoHS/90

2,520 : $2.248
1,035 : $2.284
540 : $2.521
90 : $2.787
10 : $3.069
1 : $4.795

NCP81075DR2G

onsemi

Gate Drivers; NCP81075DR2G; ON SEMICONDUCTOR; 2
RoHS : Compliant

1,000 : $1.624
500 : $1.782
100 : $2.0
30 : $2.124
10 : $2.787
1 : $3.205

10750

Carclo Technical Plastics

Holder Carclo 10750, 20mm, hexagon, black, for Cree LEDs XP, XT series

25,000 : $0.177
10,000 : $0.183
5,000 : $0.197
2,000 : $0.209
1,000 : $0.226
500 : $0.244
100 : $0.292
10 : $0.321
1 : $0.587

TMP1075DGKR

Texas Instruments

Temperature Sensors; TMP1075DGKR; TEXAS INSTRUMENTS; 8; 0 m; 3 mm; VSSOP
RoHS : Compliant

2,500 : $0.148
1 : $0.236

Master Electronics

1075

Amphenol RF

Coax Cable Termination - Single Hole - Mounting for RG-8 RG-213 RG-225.
RoHS : Compliant

100 : $58.47
75 : $59.66
50 : $84.78
25 : $160.14
10 : $160.54
5 : $160.94
1 : $161.35

FW-24-03-F-D-141-075-P

Samtec Inc

RoHS : Compliant

2,500 : $2.4
1,000 : $3.3
500 : $4.1
250 : $4.6
100 : $4.81
50 : $6.47
25 : $6.48
5 : $7.98

FW1903SD321075EPATR

Samtec Inc

RoHS : Compliant

2,500 : $3.58
1,000 : $4.21
500 : $5.31
250 : $5.98
100 : $6.52
50 : $7.33
25 : $7.35
5 : $9.05

IDSD-03-D-10.75-G

Samtec Inc

.100 Slim Body Double Row IDC Ribbon Cable Assembly Socket
RoHS : Compliant

2,500 : $3.39
1,000 : $4.04
500 : $4.37
250 : $5.7
100 : $6.21
50 : $6.48
25 : $6.5
5 : $8.0

HTMS-107-52-S-D-006

Samtec Inc

.050 X .100 High-Temp Through-hole Micro Terminal Strip
RoHS : Compliant

7,500 : $1.17
5,000 : $1.2
2,500 : $1.41
1,000 : $1.53
500 : $2.01
250 : $2.07
100 : $2.17
10 : $2.67

HTMS-107-55-G-D

Samtec Inc

.050 X .100 High-Temp Through-hole Micro Terminal Strip
RoHS : Compliant

7,500 : $1.16
5,000 : $1.19
2,500 : $1.43
1,000 : $1.56
500 : $2.09
250 : $2.15
100 : $2.25
10 : $2.77

HMTMS-107-53-G-D-000

Samtec Inc

RoHS : Compliant

7,500 : $1.04
5,000 : $1.07
2,500 : $1.37
1,000 : $1.48
500 : $2.01
250 : $2.07
100 : $2.17
10 : $2.67

HMTMS-107-54-G-D-230

Samtec Inc

Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST Thru-Hole
RoHS : Compliant

7,500 : $1.06
5,000 : $1.09
2,500 : $1.37
1,000 : $1.52
500 : $2.09
250 : $2.15
100 : $2.25
10 : $2.77

HMTMS-107-56-S-D-100

Samtec Inc

Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST Thru-Hole
RoHS : Compliant

7,500 : $1.21
5,000 : $1.24
2,500 : $1.55
1,000 : $1.71
500 : $2.31
250 : $2.42
100 : $2.53
10 : $3.12

FTR-107-51-G-D-A-06-P

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

5,000 : $2.03
2,500 : $2.39
1,000 : $2.54
500 : $3.08
250 : $3.26
100 : $3.51
50 : $3.52
10 : $4.33

FTR-107-51-T-S

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

7,500 : $0.3416
5,000 : $0.3425
2,500 : $0.4366
1,000 : $0.5075
500 : $0.6858
250 : $0.6875
50 : $0.8462

FTR-107-54-S-D-TR

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

7,500 : $1.34
5,000 : $1.35
2,500 : $1.72
1,000 : $1.9
500 : $2.56
250 : $2.67
50 : $2.89
10 : $3.44

FTR-107-55-G-D-A-P-TR

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

5,000 : $1.48
2,500 : $1.89
1,000 : $2.3
500 : $2.54
250 : $3.26
100 : $3.51
50 : $3.52
10 : $4.33

FTR-107-55-S-S-TR

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

7,500 : $0.878
5,000 : $0.88
2,500 : $1.11
1,000 : $1.257
500 : $1.638
250 : $1.687
100 : $1.766
25 : $2.173

FTR-107-57-S-D

Samtec Inc

.050 X .100 Surface Mount Micro Terminal Strip
RoHS : Compliant

5,000 : $1.73
2,500 : $2.17
1,000 : $2.36
500 : $2.93
250 : $3.1
100 : $3.33
50 : $3.34
10 : $4.11

Pasternack Enterprises US

PE15A1075

Pasternack Enterprises

Key Specifications, Gain: 42 dB, Power Output: 25 dBm Psat, Frequency, Min: 1 GHz, Frequency, Max: 7 GHz, Noise Figure, Max: 3.3 dB, Design: GaN Input Protected Low Noise, Voltage, DC Max: 28 Volts, Current, DC Max: 300 mA, Connector Series: SMA. 1.5 dB NF GaN Input Protected Low Noise Amplifier, Operating from 1 GHz to 7 GHz with 42 dB Gain, 25 dBm Psat and SMA. PE15A1075 gan input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized gan input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA gan input protected low noise amplifier has a minimum frequency of 1 GHz and maximum frequency of 7 GHz. The significantly low noise figure of this radio frequency amplifier is 3.3 dB with a typical gain of 42 dB. gan input protected LNA amplifier PE15A1075 is rated at 28 Volts DC maximum and 300 mA. Our gan input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave gan input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $10,350.0
5 : $9,936.0
10 : $9,522.0
25 : $9,108.0

PEANFP1075

Pasternack Enterprises

Key Specifications, Antenna Type: Flat Panel, Polarization: Vertical and Horizontal, Minimum Frequency: 2.4 GHz, Maximum Frequency: 5.85 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. WiFi 6, 2400-2500/5150-5850 MHz 6/6 dBi, 8x8 MIMO Panel, N-Male. The PEANFP1075 WiFi 6 8x8 MIMO Flat Panel Antenna from Pasternack is a high performance directional antenna designed for the 2400 MHz to 5800 MHz bands and is available to ship same day. It features 8 (eight) pigtails terminated with Type N Male connectors for 8x8 MIMO applications. It is a UV protected, outdoor rated antenna with 60 degree horizontal half power beamwidth. The PEANFP1075 is ideally suited for WiFi Hotspots (IEEE 802.11ax/ac/n/b/g) as well as IoT, Zigbee and Bluetooth. The Pasternack high performance flat panel PEANFP1075 is a rugged antenna providing broad coverage, low latency, increased network capacity and 6 dBi gain. This 8 port N Type Male flat panel directional antenna is suitable for commercial radios and access points in public and private networks that are equipped with N Female connectors. Pasternack’s PEANFP1075 supports 2.4 and 5 GHz bands. This WiFi 6 PEANFP1075 60 degree flat panel antenna with 8 N Type Male connectors, as well as our wide selection of superior quality RF parts, ships same day. Contact our knowledgeable and friendly technical support and sales staff for your answers on antennas or other Pasternack products.

1 : $1,010.0
10 : $969.6
25 : $929.2
100 : $888.8

PE3C10754-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to Mini SMP Female Right Angle Cable 24 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10754-24 1.85mm male to right angle mini SMP female RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10754-24 can also be known as a 1.85mm plug to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10754-24 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10754-24 can also be used in the other direction and will be a right angle mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements.

1 : $294.21
10 : $282.44
25 : $270.67
100 : $258.9

PE3C10754-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to Mini SMP Female Right Angle Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10754-6 1.85mm male to right angle mini SMP female RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10754-6 can also be known as a 1.85mm plug to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10754-6 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10754-6 can also be used in the other direction and will be a right angle mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements.

1 : $264.83
10 : $254.24
25 : $243.64
100 : $233.05

PE3C10750-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-9 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-9 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-9 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-9 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements.

1 : $392.73
10 : $377.02
25 : $361.31
100 : $345.6

PE3C10757-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to SSMC Plug Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10757-9 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757-9 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757-9 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10757-9 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements.

1 : $226.32
10 : $217.27
25 : $208.21
100 : $199.16

PE3C10755-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to BMMA Male Bulkhead Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10755-18 1.85mm male to BMMA male bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to BMMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to BMMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a BMMA bulkhead cable connection on the other. Our 1.85mm to BMMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10755-18 can also be known as a 1.85mm plug to BMMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead BMMA male cable has a maximum VSWR of 1.4:1. This PE3C10755-18 1.85mm plug to BMMA plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to BMMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10755-18 can also be used in the other direction and will be a BMMA male bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to BMMA plug bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to BMMA cable assembly for quick shipment worldwide. Variations of 1.85mm and BMMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to BMMA RF cable assembly as per your requirements.

1 : $239.01
10 : $229.45
25 : $219.89
100 : $210.33

PE3W10757/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to 7/16 DIN Male Cable Using LMR-195 Coax with HeatShrink. PE3W10757/HS is a 7/16 DIN male right angle to 7/16 DIN male cable using LMR-195 coax. This Pasternack 7/16 DIN male right angle to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10757/HS 7/16 DIN male right angle to 7/16 DIN male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C11075

Pasternack Enterprises

PE3W10756-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Male Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to SMA male cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA jack right angle 2 hole flange to SMA male cable 48 inch length using RG142 coax, BMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and SMA cable connection on the other. Our right angle BMA to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W10756-48 can also be known as a right angle BMA female to SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3W10756-48 is built with RG142 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with right angle BMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency BMA right angle jack 2 hole flange to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10756-48 can also be used in the other direction and will be SMA male to right angle BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA right angle female 2 hole flange to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to SMA male cable 48 inch length using RG142 coax.

1 : $205.99
25 : $195.69
50 : $185.39
100 : $177.15

PE3W10753/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG58 Coax with HeatShrink. PE3W10753/HS is a SMA male to TNC male cable using RG58 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10753/HS SMA male to TNC male cable assembly is constructed with RG58 coax.

PE3W10757

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using LMR-195 Coax. PE3W10757 is a 7/16 DIN male to 7/16 DIN male right angle cable using LMR-195 coax. This Pasternack 7/16 DIN male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10757 7/16 DIN male to 7/16 DIN male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10756-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to SMA male cable 36 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA jack right angle 2 hole flange to SMA male cable 36 inch length using RG142 coax, BMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and SMA cable connection on the other. Our right angle BMA to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W10756-36 can also be known as a right angle BMA female to SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3W10756-36 is built with RG142 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with right angle BMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency BMA right angle jack 2 hole flange to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10756-36 can also be used in the other direction and will be SMA male to right angle BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA right angle female 2 hole flange to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to SMA male cable 36 inch length using RG142 coax.

1 : $191.99
25 : $182.39
50 : $172.79
100 : $165.11

PE3W10755

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMB Plug to Slide-On BMA Plug Bulkhead Cable Using RG316-DS Coax. PE3W10755 is a SMB plug to BMA plug bulkhead cable using RG316-DS coax. This Pasternack SMB plug to BMA plug bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BMA for connector 2. Our plug SMB to plug BMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10755 SMB plug to BMA plug bulkhead cable assembly is constructed with RG316-DS coax.

PE3W11075/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm.

Sager

1075

Keystone Electronics Corp

Cylindrical Battery Contacts, Clips, Holders & Springs AAA holder w/ coil spring THM

1 : $3.08
500 : $2.38
1,000 : $1.83

IDSD-03-D-10.75-G

Samtec Inc

Ribbon Cables / IDC Cables
RoHS : Compliant

HTMS-107-52-S-D-006

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

HTMS-107-55-G-D

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

HMTMS-107-54-G-D-230

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

HMTMS-107-56-S-D-100

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-51-G-D-A-06-P

Samtec Inc

Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant

1 : $4.76
50 : $3.88
100 : $3.29
500 : $2.92
1,000 : $2.48
2,000 : $2.33

FTR-107-51-L-S-03

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-51-T-S

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-54-S-D-TR

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-55-G-D-A-P-TR

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-55-S-S-TR

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

FTR-107-57-S-D

Samtec Inc

Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch
RoHS : Compliant

1 : $4.66
50 : $3.8
100 : $3.23
500 : $2.87
1,000 : $2.3
2,000 : $2.11

RF174-01RP1-01BR1-0750

Samtec Inc

RF Cable Assemblies
RoHS : Compliant

DW-17-14-G-T-1075

Samtec Inc

Board to Board & Mezzanine Connectors
RoHS : Compliant

TE Connectivity

2-1601075-1

TE Connectivity

WIRE2BLADE,STD, SMZ Magnet Wire Terminal Type: Blade Receptacle Magnet Wire Size: 34 – 18 AWG Magnet Wire Size: .16 – 1.02 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .02 in Blade Receptacle 34 – 18 AWG .16 – 1.02 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 2-1601075-1 | Internal Number: 2-1601075-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.07
100 : $0.09
25 : $0.13
10 : $0.15
1 : $0.16

349,105

2-1601075-2

TE Connectivity

131-146-014=WIRE2BLADE,STD,SMZ Magnet Wire Terminal Type: Blade Receptacle Magnet Wire Size: 34 – 18 AWG Magnet Wire Size: .16 – 1.02 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .02 in Blade Receptacle 34 – 18 AWG .16 – 1.02 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 2-1601075-2 | Internal Number: 2-1601075-2 | Alias Number: 131-146-014 | TE Connectivity
RoHS : Compliant

1,000 : $0.07
100 : $0.09
25 : $0.13
10 : $0.15
1 : $0.16

185,820

SQMW1075RJ

TE Connectivity

SQM10 75R 5% (WIRE) Resistance Value: 75 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Wirewound Resistor: Vertical Mount | 75 Ω Wire Wound Power Resistor 5 % | Part Number: SQMW1075RJ | Internal Number: 1623785-7 | TE Connectivity
RoHS : Compliant

500 : $1.09
250 : $1.12
100 : $1.16
50 : $1.2
25 : $1.24
10 : $1.27
1 : $1.31

19,509

2308107-5

TE Connectivity

DDR4 DIMM 288 PIN TH TYPE DRAM Type: Double Data Rate (DDR) 4 Connector System: Board-to-Bus Bar Number of Positions: 288 Termination Method to PCB: Through Hole - Solder Module Orientation: Vertical Double Data Rate (DDR) 4 Board-to-Bus Bar 288 Through Hole - Solder | Dimm | Part Number: 2308107-5 | Internal Number: 2308107-5 | TE Connectivity
RoHS : Compliant

1,000 : $1.74
500 : $1.79
250 : $1.84
100 : $1.9
50 : $1.96
1 : $2.15

7,457

SQMBW1075RJ

TE Connectivity

SQMB10 75R (WIRE) 5% Resistance Value: 75 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Through-Hole Resistor | 75 Ω Wire Wound Power Resistor 5 % | Part Number: SQMBW1075RJ | Internal Number: 4-2176633-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.77
500 : $1.82
250 : $1.87
100 : $1.93
50 : $1.98
25 : $2.03
10 : $2.09
1 : $2.14

1,159

THS1075RJ

TE Connectivity

THS10 75R 5% Resistance Value: 75 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 75 Ω Wire Wound 5 % Power Resistor | Part Number: THS1075RJ | Internal Number: 3-1879073-1 | TE Connectivity
RoHS : Compliant

100 : $4.81
50 : $5.03
25 : $5.26
10 : $5.49
1 : $5.72

107

2273107-5

TE Connectivity

M12 Y conn Male to 2xM12 Female A Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 4 2 m 6.5 ft | M12 A-Code Y-Cable Assembly | Part Number: 2273107-5 | Internal Number: 2273107-5 | TE Connectivity
RoHS : Compliant

50 : $71.68
25 : $75.9
10 : $80.12
1 : $84.33

1-2273107-5

TE Connectivity

M12 Y conn Male to 2xM12 Female A Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 4 2 m 6.5 ft | M12 A-Code Y-Cable Assembly | Part Number: 1-2273107-5 | Internal Number: 1-2273107-5 | TE Connectivity
RoHS : Compliant

50 : $64.38
25 : $68.17
10 : $71.95
1 : $75.74

Teledyne HiRel

M38510/75304BFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET
RoHS : Not Compliant

M38510/75601BZA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR
RoHS : Not Compliant

M38510/75403B2A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75302B2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET
RoHS : Not Compliant

M38510/75705BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75201B2A

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/75204BCA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

M38510/75302BDA

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET
RoHS : Not Compliant

M38510/75201BCA

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/75503BRA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

M38510/75601BSA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR
RoHS : Not Compliant

M38510/75703BZA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75803BEA

Teledyne HiRel

DECODER, DUAL 2-TO-4-LINE
RoHS : Not Compliant

M38510/75201BDA

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/75503BSA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

TRCR1210-752MT

VENKEL LTD

Trimmable CR;1210;7.5K;�20%
RoHS : Compliant

HVCR2010-2W-1075FT

VENKEL LTD

High Voltage CR;2010;1/2W;10.7M;�1%
RoHS : Compliant

PWCR1206-UK-1075DT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;10.7M;�0.5%
RoHS : Compliant

CR1206-8W-1075FT

VENKEL LTD

Chip Resistor;1206;1/8W;10.7M;�1%
RoHS : Compliant

PWCR0805-RK-1075FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;10.7M;�1%
RoHS : Compliant

CR1206-4W-1075FT

VENKEL LTD

Chip Resistor;1206;1/4W;10.7M;�1%
RoHS : Compliant

PWCR2512-ZK-1075FT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;10.7M;�1%
RoHS : Compliant

CR1210-4W-1075FT

VENKEL LTD

Chip Resistor;1210;1/4W;10.7M;�1%
RoHS : Compliant

PWCR2010-WK-1075DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;10.7M;�0.5%
RoHS : Compliant

PWCR1206-UK-1075FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;10.7M;�1%
RoHS : Compliant

PWCR2512-ZK-1075DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;10.7M;�0.5%
RoHS : Compliant

PWCR2010-WK-1075FT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;10.7M;�1%
RoHS : Compliant

CR2010-2W-1075FT

VENKEL LTD

Chip Resistor;2010;1/2W;10.7M;�1%
RoHS : Compliant

PWCR1210-VK-1075FT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;10.7M;�1%
RoHS : Compliant

CR2512-1W-1075FT

VENKEL LTD

Chip Resistor;2512;1W;10.7M;�1%
RoHS : Compliant

Vyrian

380MS135MT1107-5

Glenair Inc

Connector Accessory, Backshell, Aluminum
RoHS : Compliant

12,448

DC1075B

Analog Devices Inc

11,289

MTMS-107-51-S-S-140

Samtec Inc

Board Stacking Connector, 7 Contact(s), 1 Row(s), Male, Straight, Solder Terminal
RoHS : Compliant

10,009

DC1075A

Analog Devices Inc

9,511

TMP1075D

Texas Instruments

Serial Switch/Digital Sensor

7,647

DC1075B-B

Analog Devices Inc

5,945

DS1075Z-80N

Maxim Integrated Products

Analog Circuit, PDSO8
RoHS : Not Compliant

5,918

ADM1075-2ARUZ-RL7

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, DMOS, PDSO28
RoHS : Compliant

5,278

5962-01-075-9228

Texas Instruments

AND Gate, TTL, CDFP14
RoHS : Not Compliant

4,153

NCP1075ABP065G

onsemi

Switching Controller, Current-mode, 71kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

4,026

UJA1075ATW/3V3WD,1

NXP Semiconductors

CAN Transceiver, 1-Trnsvr, PDSO32
RoHS : Compliant

3,874

DS1075Z-80

Maxim Integrated Products

Clock Generator, 80MHz, CMOS, PDSO8
RoHS : Not Compliant

3,793

1203410752

Molex

Cable Assembly
RoHS : Compliant

758

1075090000

Weidmueller & Kg

Connector Accessory

603

ZLTMM-110-75-F-D-250-20

Samtec Inc

Board Stacking Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.078 inch Pitch, Solder Terminal, Locking, Black Insulator
RoHS : Compliant

544

Waytek, Inc.

10757690

Aptiv PLC

Apex 2.80 20-18GA Female Term

3,400 : $0.0735
17,000 : $0.0666

13,600

089107.5U

Littelfuse Inc

7.5 Amp Low Profile Mini Fuse Brown Automotive Mini Fuse
RoHS : Compliant

10 : $0.5111
50 : $0.4554
100 : $0.4137
200 : $0.3997
500 : $0.3858
1,000 : $0.3706

4,108

1410750BK0048

ShawCor Ltd

DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications.

1 : $18.39
10 : $15.85
50 : $14.37
100 : $13.17
500 : $12.43

2,663

10757671

Aptiv PLC

Apex 2.8, 3 Way Sealed Female Assembly

1 : $1.5764
50 : $1.5169
100 : $1.4128
200 : $1.2046
500 : $1.1675

2,468

10757690

Aptiv PLC

Apex 2.80 20-18GA Female Term

50 : $0.1943
200 : $0.1871
500 : $0.174
1,000 : $0.155

1,132

1410750RD0048

ShawCor Ltd

DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is red adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications.

1 : $21.53
10 : $18.53
50 : $16.86
100 : $15.4
500 : $14.59

408

Win Source Electronics

TMP1075DGKR

Texas Instruments

SENSOR TEMPERATURE / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-VSSOP
RoHS : Compliant

645 : $0.466
520 : $0.4849
400 : $0.5038
280 : $0.5417
180 : $0.5607
85 : $0.5985

479,085

TMP1075DGKT

Texas Instruments

SENSOR DIGITAL -55C-125C 8VSSOP / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-VSSOP
RoHS : Compliant

1,625 : $0.185
1,300 : $0.1925
1,000 : $0.2
700 : $0.2151
450 : $0.2226
215 : $0.2376

56,950

NCP81075MNTXG

onsemi

IC GATE DRV HI-SIDE/LO-SIDE 8DFN
RoHS : Compliant

164 : $2.3686
123 : $2.6417
95 : $2.733
69 : $2.8241
45 : $2.9151
19 : $3.5528

52,000

TMP1075DSGR

Texas Instruments

IC TEMP SENSOR / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-WSON (2x2)
RoHS : Compliant

1,345 : $0.2237
1,075 : $0.2328
830 : $0.2419
580 : $0.26
375 : $0.2691
175 : $0.2873

25,840

TMP1075DSGT

Texas Instruments

HIGH-ACCURACY UPGRADE TO INDUSTR / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-WSON (2x2)
RoHS : Compliant

1,345 : $0.2237
1,075 : $0.2328
830 : $0.2419
580 : $0.26
375 : $0.2691
175 : $0.2873

25,410

TMP1075DR

Texas Instruments

DIGITAL TEMP SENSOR W/ 2-WIRE IN / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-SOIC
RoHS : Compliant

1,090 : $0.2759
875 : $0.2871
675 : $0.2983
470 : $0.3207
305 : $0.3319
145 : $0.3544

18,445

TMP1075NDRLT

Texas Instruments

IC TEMPERATURE SENSOR WITH PE / Temperature Sensor Digital, Local -40°C ~ 125°C 12 b SOT-563
RoHS : Compliant

410 : $0.8287
325 : $0.8624
250 : $0.896
175 : $0.9634
115 : $0.9971
55 : $1.0644

14,700

TMP1075NDRLR

Texas Instruments

1C IC TEMPERATURE SENSOR WITH PE / Temperature Sensor Digital, Local -40°C ~ 125°C 12 b SOT-563
RoHS : Compliant

710 : $0.4247
530 : $0.4737
410 : $0.49
300 : $0.5064
195 : $0.5227
80 : $0.6371

14,460

NCP1075STBT3G

onsemi

IC OFFLINE SWITCH FLYBACK SOT223
RoHS : Compliant

445 : $0.6772
335 : $0.7554
260 : $0.7814
190 : $0.8075
120 : $0.8335
50 : $1.0158

8,000

NCP1075STCT3G

onsemi

IC OFFLINE SWITCH FLYBACK SOT223 / Converter Offline Flyback Topology 130kHz SOT-223 (TO-261)
RoHS : Compliant

440 : $0.6894
330 : $0.769
255 : $0.7955
185 : $0.822
120 : $0.8485
50 : $1.0341

7,900

UJA1075ATW/3V3/WD

Nexperia

HIGH-SPEED CAN/ LIN CORE SYSTEM / Automotive Interface 32-HTSSOP

39 : $8.6925
29 : $9.6955
23 : $10.0298
17 : $10.3641
11 : $10.6985
5 : $13.0387

6,511

UJA1075ATW/3V3/WDJ

Nexperia

IC INTFACE SPECIALIZED 32HTSSOP / Automotive Interface 32-HTSSOP

27 : $14.6242
20 : $16.311
16 : $16.8737
12 : $17.4364
8 : $17.9992
3 : $21.9355

6,255

1075-R36 Distributor

Link URL