1085D2T28-R Price, Distributor, Stock

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 67 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Gold, Connector Mount Method 2: None, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Gold. 1.85mm Male to 1.85mm Male Adapter. 1.85mm adapter PE91085 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 1.85mm to 1.85mm adapter is a in-series coaxial adapter design. This 50 Ohm 1.85mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 67 GHz. 1.85mm male to 1.85mm male adapter is one of the many RF components that ship same day as they are ordered. PE91085 male 1.85mm to male 1.85mm adapter has a straight body. This Pasternack straight 1.85mm coax adapter is a in-line RF adapter. Our male 1.85mm to male 1.85mm adapter PE91085 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 1.85mm to 1.85mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,130.0
5 : $1,084.8
10 : $1,039.6

PE3C10857-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10857-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10857-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10857-36 SMA plug to SMA plug cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements.

1 : $245.2
25 : $232.94
50 : $220.68
100 : $210.87

PE3C10857-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10857-6 non-magnetic SMA male to SMA male RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10857-6 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10857-6 SMA plug to SMA plug cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements.

1 : $212.22
25 : $201.61
50 : $191.0
100 : $182.51

PE3C10855-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 6 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-6 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-6 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-6 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements.

1 : $419.32
25 : $398.35
50 : $377.39
100 : $360.62

PE3C10855-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements.

1 : $425.01
25 : $403.76
50 : $382.51
100 : $365.51

PE3C10853-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-6 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-6 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-6 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-6 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements.

1 : $120.72
25 : $114.68
50 : $108.65
100 : $103.82

PE3W21085LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMA Male Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W21085LF/HS is a SMP male bulkhead to SMA male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21085LF/HS SMP male bulkhead to SMA male cable assembly is constructed with PE-P086HF coax.

PE3C10851-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-18 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-18 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-18 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.

1 : $69.51
25 : $66.03
50 : $62.56
100 : $59.78

PE3C10854-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-24 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-24 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-24 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-24 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.

1 : $155.8
25 : $148.01
50 : $140.22
100 : $133.99

PE3C10851-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-24 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-24 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-24 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.

1 : $77.2
25 : $73.34
50 : $69.48
100 : $66.39

PE3W10851LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements.

PE3W10855

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax.

PE3C10856-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-36 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements.

1 : $228.21
25 : $216.8
50 : $205.39
100 : $196.26

PEWCT1085

Pasternack Enterprises

1 : $2,850.0
5 : $2,736.0
10 : $2,622.0

PE3W10851LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. C Female to N Female Cable 12 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 12 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 12 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-12 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-12 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-12 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements.

1 : $179.99
10 : $172.79
25 : $165.59
100 : $158.39

TE Connectivity

61085-1

TE Connectivity

.156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.36
100 : $0.48
10 : $0.59
1 : $0.74

5,449

1-66108-5

TE Connectivity

III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity
RoHS : Compliant

10,000 : $0.98
5,000 : $1.0
2,500 : $1.02
1,000 : $1.05
500 : $1.07
250 : $1.09
100 : $1.11
50 : $1.13
25 : $1.15
10 : $1.18
1 : $1.2

4,000

141085-2

TE Connectivity

TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity
RoHS : Compliant

2,500 : $3.32
1,000 : $3.41
500 : $3.5
250 : $3.59
100 : $3.68
50 : $3.77
25 : $3.86
10 : $3.95
1 : $4.04

3,210

2108504-1

TE Connectivity

2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.52
100 : $0.7
10 : $0.87
1 : $1.1

2,305

1-2273108-5

TE Connectivity

M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity
RoHS : Compliant

25 : $30.05
10 : $32.37
1 : $34.68

2273108-5

TE Connectivity

M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity
RoHS : Compliant

100 : $30.25
50 : $31.69
25 : $33.13
10 : $34.56
1 : $36.01

Vyrian

345-108-525-512

EDAC Inc

Card Edge Connector, 108 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Hole 0.128, Green Insulator
RoHS : Compliant

18,318

746-108-525-601

EDAC Inc

Card Edge Connector, 108 Contact(s), 2 Row(s), Female, Straight, 0.125 inch Pitch, Solder Terminal, Black Insulator
RoHS : Compliant

12,655

1671085

Phoenix Contact

Interconnection Device
RoHS : Compliant

11,522

46-01-08-500-04

Grayhill Inc

Pushbutton Switch, DPDT, Momentary, Screw Terminal, Panel Mount
RoHS : Compliant

10,460

LM1085IT-3.3

Texas Instruments

Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3
RoHS : Not Compliant

9,188

LM1085ISX-5-0-NOPB

Texas Instruments

8,270

LT1085CT-3-6-PBF

Analog Devices Inc

7,645

LT1085CT-3.3#PBF

Analog Devices Inc

Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3
RoHS : Compliant

7,113

ADM1085AKS-RL

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, CMOS, PDSO6
RoHS : Not Compliant

7,026

LT1085IM-PBF

Analog Devices Inc

6,546

LM1085IS-3-3-NOPB

Texas Instruments

5,934

101085

Micron Technology, Inc

4,240

TVP3010-85CGA

Texas Instruments

Palette DAC, 1600 X 1280 Pixels, CMOS, CPGA84

3,562

MAX1085BESA-T

Maxim Integrated Products

ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8
RoHS : Not Compliant

1,091

46-01-08-500-05

Grayhill Inc

Pushbutton Switch, DPDT, Momentary, Screw Terminal, Panel Mount
RoHS : Compliant

517

Waytek, Inc.

12110853-L

Aptiv PLC

Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece

100 : $0.2099
200 : $0.1871
500 : $0.1784
1,000 : $0.1651

6,843

Win Source Electronics

TPS61085DGKR

Texas Instruments

IC REG BOOST ADJ 2A 8VSSOP
RoHS : Compliant

965 : $0.3124
720 : $0.3485
555 : $0.3605
405 : $0.3725
265 : $0.3845
110 : $0.4686

100,000

LM1085ISX-ADJ

Texas Instruments

LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK
RoHS : Not Compliant

360 : $0.8361
290 : $0.8701
225 : $0.904
155 : $0.972
100 : $1.006
50 : $1.074

31,500

LM1085ISX-ADJ/NOPB

Texas Instruments

IC REG LDO ADJ 3A DDPAK
RoHS : Compliant

480 : $0.6282
360 : $0.7007
280 : $0.7249
205 : $0.7491
130 : $0.7732
55 : $0.9423

28,720

LM1085IS-ADJ/NOPB

Texas Instruments

IC REG LDO ADJ 3A DDPAK
RoHS : Compliant

360 : $0.9345
270 : $1.0423
210 : $1.0782
155 : $1.1142
100 : $1.1501
40 : $1.4017

28,480

TPS61085TPWR

Texas Instruments

IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant

320 : $0.9424
240 : $1.0511
185 : $1.0873
135 : $1.1236
90 : $1.1598
40 : $1.4135

22,000

ADM1085AKSZ

Analog Devices Inc

Processor Supervisor 0.6V 1 Active High/Open Drain 6-Pin SC-70 Reel

460 : $0.6523
370 : $0.6788
285 : $0.7054
200 : $0.7584
130 : $0.7849
60 : $0.8379

15,000

ADM1085AKS-PEEL7

Analog Devices Inc

820 : $0.4113
655 : $0.428
505 : $0.4446
355 : $0.4781
230 : $0.4948
110 : $0.5282

14,280

LM1085IT-ADJ

Texas Instruments

IC REG LDO ADJ 3A TO220-3
RoHS : Not Compliant

215 : $1.3978
172 : $1.4546
133 : $1.5114
93 : $1.6251
60 : $1.6819
28 : $1.7955

10,800

LM1085IS-3.3

Texas Instruments

IC REG LDO 3.3V 3A DDPAK
RoHS : Not Compliant

202 : $1.491
162 : $1.5516
125 : $1.6122
87 : $1.7334
56 : $1.794
27 : $1.9152

8,810

LM1085ISX-3.3

Texas Instruments

IC REG LDO 3.3V 3A DDPAK
RoHS : Not Compliant

202 : $1.491
162 : $1.5516
125 : $1.6122
87 : $1.7334
56 : $1.794
27 : $1.9152

8,640

52207-1085

Molex

1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging
RoHS : Compliant

1,005 : $0.2994
750 : $0.3339
580 : $0.3454
425 : $0.3569
275 : $0.3684
115 : $0.449

3,610

LM1085IS-12/NOPB

Texas Instruments

LM1085 3A Low Dropout Positive Regulators
RoHS : Compliant

201 : $1.4926
151 : $1.6648
117 : $1.7222
85 : $1.7796
55 : $1.837
23 : $2.2389

1,230

LT1085CT#PBF

Linear Technology

IC REG LDO ADJ 3A TO220-3
RoHS : Compliant

17 : $20.5613
14 : $21.397
11 : $22.2329
8 : $23.9045
5 : $24.7404
3 : $26.412

920