| Electronic Components Datasheet Search |
|
1085D2T50-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | SMP1331-085LF | Skyworks Solutions Inc | RF DIODE PIN 200V 2.5W 3QFN RoHS : Compliant | 61,393 | ||
| SMP1331-085LF | Skyworks Solutions Inc | RF DIODE PIN 200V 2.5W 3QFN RoHS : Compliant |
| 61,393 | ||
| LM1085RS-ADJ | HTC Korea | IC REG LINEAR POS ADJ 3A TO252-3 |
| 15,931 | ||
| 1085 | Adafruit Industries | ADS1115 16BIT ADC 4CH PROG GAIN |
| 3,572 | ||
| SMP1331-085LF | Skyworks Solutions Inc | RF DIODE PIN 200V 2.5W 3QFN RoHS : Compliant |
| 1,393 | ||
| SLY 1 085 1 G | Fischer Elektronik GmbH & Co KG | 0.5 MM, STRAIGHT |
| 1,000 | ||
| SLY 1 085 26 Z | Fischer Elektronik GmbH & Co KG | 0.5 MM, STRAIGHT |
| 1,000 | ||
| 1085A | Essentra Components | HOLE PLUG LOW-DENSITY PE BLUE |
| 899 | ||
| TMS-108-51-T-S | Samtec Inc | .050" (1.27MM) MICRO HEADER RoHS : Compliant |
| 448 | ||
| 1-2273108-5 | TE Connectivity | CIRC CBL 3POS RCPT TO PLUG 6.56' RoHS : Compliant |
| 88 | ||
| 440HS148M2108-5S | JRH ELECTRONICS | CONNECTOR BACKSHELL |
| 58 | ||
| 710-858NF323232 | JRH ELECTRONICS | CONNECTOR BACKSHELL |
| 54 | ||
| PTT-11085 | BUD Industries Inc | JUNCTION BOX ABS 4.93"L X 2.96"W |
| 48 | ||
| 1085267 | Phoenix Contact | DESKTOP THRML , TRANSFER RoHS : Compliant |
| 18 | ||
| RP1085 | Hammond Manufacturing | BOX ABS GRAY 4.13"L X 2.95"W |
| 2 | ||
![]() Avnet Americas | 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 12,000 | |
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | ||
| 52207-1085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm - Tape and Reel (Alt: 0522071085) RoHS : Compliant |
| 4,000 | ||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant |
| 2,000 | ||
ATS-PCBT1085![]() | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| TMS-108-51-T-S | Samtec Inc | Pin Header, Board-to-Board, 1.27 mm, 1 Rows, 8 Contacts, Through Hole, TMS Series - Rail/Tube (Alt: TMS-108-51-T-S) RoHS : Compliant |
| 0 | ||
| 440HS148M2108-5S | Glenair Inc | - Bulk (Alt: 440HS148M2108-5S) RoHS : Not Compliant |
| 0 | ||
| 1-2273108-5 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-2273108-5) RoHS : Compliant |
| 0 | ||
| 20010850-00 | TE Connectivity | PCA-375-100 05BL5M - Bulk (Alt: 20010850-00) RoHS : Not Compliant |
| 0 | ||
| 217-1085-001 MS | ITT Interconnect Solutions | - Bulk (Alt: 217-1085-001 MS) RoHS : Not Compliant |
| 0 | ||
| 1010850189 | Weidmüller Interface GmbH & Co. KG | IE-C5DB4RE0189MCSMCS-E - Bulk (Alt: 1010850189) RoHS : Not Compliant |
| 0 | ||
| 10127721-085LF | Amphenol Corporation | Connector Power Header 8 Position 3mm Solder Straight Through Hole 8 Terminal 1 Port Tray - Trays (Alt: 10127721-085LF) RoHS : Not Compliant |
| 0 | ||
| 11108544-00 | TE Connectivity | AST4530I00069H4X9353:CTO-13000000-02 - Bag (Alt: 11108544-00) RoHS : Not Compliant |
| 0 | ||
| ZML-108-53-G-D-700-SM | Samtec Inc | - Bulk (Alt: ZML-108-53-G-D-700-SM) RoHS : Compliant | 0 | |||
| 217-1085-001 | ITT Interconnect Solutions | NUT PV7G-24 JAM - Bulk (Alt: 217-1085-001) RoHS : Not Compliant |
| 0 | ||
![]() Newark | DW-05-14-L-D-1085 | Samtec Inc | CONN STACK BRD, 2.54MM, 10POS, HDR; RoHS : Compliant |
| 251 | |
| TMS-108-51-T-S | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 8POS; RoHS : Compliant |
| 188 | ||
| DW-08-14-T-D-1085 | Samtec Inc | CONN STACK BRD, 2.54MM, 16POS, HDR; RoHS : Compliant |
| 188 | ||
| TMS-108-51-S-S | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 8POS; RoHS : Compliant |
| 187 | ||
| HTMS-108-53-G-S | Samtec Inc | PIN HEADER, HTMS-108-53-G-S; RoHS : Compliant |
| 187 | ||
| HTMS-108-52-G-S | Samtec Inc | PIN HEADER, HTMS-108-52-G-S; RoHS : Compliant |
| 187 | ||
| MTMS-108-51-T-S-155 | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 8POS; RoHS : Compliant |
| 187 | ||
| MTMS-108-55-S-S-345 | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 8POS; RoHS : Compliant |
| 184 | ||
| MTMS-108-55-S-D-250 | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 16POS; RoHS : Compliant |
| 168 | ||
| TMS-108-58-G-D | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 16POS; RoHS : Compliant |
| 155 | ||
| 1085 | Weller Hand Tools GmbH | BAFFLE KIT; RoHS : Not Compliant |
| 144 | ||
| ESW-108-59-G-S | Samtec Inc | CONNECTOR, RCPT, 8POS, 1ROW, 2.54MM; RoHS : Compliant |
| 49 | ||
| XF-1085-FAR | Labfacility Limited | THERMOCOUPLE, N TYPE, 2M, 1100 DEG C; RoHS : Compliant |
| 10 | ||
| 1.15.108.551/0000 | RAFI GmbH & Co Kg | SWITCH, PUSHBUTTON, LATCHING, ILLUM; RoHS : Compliant |
| 8 | ||
| ARK1085CHFSSL | FIBOX | ENCLOSURE PLAST, SMALL, POLYCARBONATE; RoHS : Compliant |
| 3 | ||
![]() NXP Semiconductors | P3T1085UKZ | NXP Semiconductors | ±0.7 °C Accuracy Temperature Sensor with I3C/I²C Interface in WLCSP6 package, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 8,043 | |
| P3T1085UK-ARD | NXP Semiconductors | P3T1085UK Arduino® Shield Evaluation Board, RoHS : Compliant |
| 5 | ||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay active star coupler (4 branches), Reel 13" Q1/T1 in Sulfur Barrier Bag RoHS : Compliant |
| 895 | ||
![]() RS | 97-3102A-22(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLID BACKSHELL 22 -55 C +125, MIL-5015 TYPE, 97 SERIES |
| 171 | |
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations | CABLE RECEPTACLE SHELL, METAL SZ 18, BLACK, MIL-5015 TYPE 97 SERIES |
| 102 | ||
| 1710852 | RS Pro | CONTINUOUS EXTERNAL PIEZO BUZZER 30VAC 75DB 4.5KHZ 1MA 16.5 X 6.7MM |
| 50 | ||
| 66261085067 | Norton Winter | BLAZE CLOTH FILLE BELT 120 GRIT R980P CA, 1 X 24 IN. |
| 50 | ||
| RLY3-OSSD100 (1085343) | SICK AG | SAFETY RELAY, OSSD CODED SIGNALS, 24 VDC, RLY3 SERIES |
| 23 | ||
| 2010851 | RS Pro | M5 LOCKING HALF NUT ZINC PLATED |
| 22 | ||
| 1.15.108.551/0000 | RAFI GmbH & Co Kg | PUSHBUTTON SWITCH, LUMOTAST 75,1NC+1NO, RND, LATCHING,16.2MM, LED,4A,250V, IP40,SLDR RoHS : Compliant |
| 12 | ||
| CK 19-0 (U0108-55) | TURCK Inc | CONNECTOR 12 - 16 AND 19 PIN MULTIFASTINLINE NICKEL PLATED |
| 5 | ||
| 2108588 | RS Pro | PA 6 CABLE SPIRAL WRAPPING 0.59" TO 0.63"(15 TO 16MM) CABLE DIA 16 5" BLACK |
| 3 | ||
| 1085488 | Phoenix Contact | PANEL-MOUNTING ACCESSORY FOR 5/8 PORT SWITCHES, FL PANEL ADAPTER 22.5 RoHS : Compliant |
| 2 | ||
| 56108 (56108-5) | Klein Tools Inc | POLY PULL LINE WITH ORANGE TRACER 500-FEET |
| 2 | ||
| 1085267 | Phoenix Contact | PRINTER, THERMAL TRANSFER, TOUCH SCREEN, WIRE & CABLE MARKING, THERMOMARK CARD,2.0 RoHS : Compliant |
| 1 | ||
| 116210-85 | AMETEK Inc | VACUUM MOTOR, AMETEK LAMB, 120V, 5.7", 2-STAGE, TANGENTIAL, 9A |
| 1 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
![]() Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
![]() Rochester Electronics | LT1085CT-5#PBF | Analog Devices Inc | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 229 | |
| LT1085CT-12#PBF | Analog Devices Inc | IC VOLT REG Adjustable Step-Down Buck 1 OUT 1.24V - 30V 550mA (Switch) 16-SOIC Tube RoHS : Compliant |
| 2 | ||
TPS61085TPWR![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP T/R RoHS : Compliant |
| 12,984 | ||
TPS61085PW![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP Tube RoHS : Compliant |
| 43 | ||
LT1085CT![]() | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 6 | ||
LT1085CT-5#PBF![]() | Linear Technology | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 43 | ||
LT1085IM-3.6#PBF![]() | Linear Technology | IC VOLT REG Fixed 1 REG 3.6V 3A TO-263-4 Tube RoHS : Compliant |
| 22 | ||
LT1085IT![]() | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 9 | ||
LT1085IT-12![]() | Linear Technology | Fixed Positive LDO Regulator, 12V, 1.2V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 1,102 | ||
DS1085LZ-25+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,067 | ||
MAX1085BCSA![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant |
| 9 | ||
| LM1085ISX-ADJ | National Semiconductor Corporation | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 1 | ||
| RAA2108502GLG#HG0 | Renesas Electronics Corporation | Switching Regulator, 1067kHz Switching Freq-Max, Hybrid, PXMA58 RoHS : Compliant |
| 200 | ||
LD1085D2T33R![]() | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-3 T/R RoHS : Compliant |
| 3,000 | ||
| SMP1331-085LF | Skyworks Solutions Inc | PIN Diode PIN - Single 200V 2.5W 3-SMD T/R RoHS : Compliant |
| 1,665 | ||
![]() Sager | TMS-108-51-T-S | Samtec Inc | Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 187 | |
| PTT-11085 | BUD Industries Inc | JUNCTION BOX 10 SIDE TERMINAL BLOCKS (4.9 X 3 X 1.7 IN) |
| 119 | ||
| 1085267 | Phoenix Contact | Printers THERMOMARK CARD 2.0 RoHS : Compliant |
| 1 | ||
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| TW-12-07-L-D-611-085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 1-2273108-5 | TE Connectivity | Sensor Cables / Actuator Cables M8 strght plug to M12 strgt socket AA RoHS : Compliant |
| 0 | ||
| 20010850-00 | TE Connectivity | TE Connectivity PCA-375-100 05BL5M |
| 0 | ||
| 511-91-085-11-041001 | Mill-Max Mfg Corp | Circuit Board Hardware - PCB STANDRD SOLDER TAIL PGA SOCKET RoHS : Not Compliant | 0 | |||
| 515-91-085-13-042002 | Mill-Max Mfg Corp | IC & Component Sockets STANDRD SOLDER TAIL PGA SOCKET | 0 | |||
| 1085186 | Phoenix Contact | Screws & Fasteners HC-LSM-M4 |
| 0 | ||
| 11108544-00 | TE Connectivity | AST4530I00069H4X9353:CTO-13000000-02 |
| 0 | ||
| ZML-108-53-G-D-700-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 4788AB51S01085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding GK,SnCu,NRS,PU,V0,Rec .125x.250x10.850 | 0 | |||
| 511-91-085-11-041002 | Mill-Max Mfg Corp | Circuit Board Hardware - PCB STANDRD SOLDER TAIL PGA SOCKET | 0 | |||
| 515-91-085-13-042003 | Mill-Max Mfg Corp | IC & Component Sockets STANDRD SOLDER TAIL PGA SOCKET | 0 | |||
![]() TME | 1310851-1 | TE Connectivity | Connector: SMB; socket; straight; 50Ω; soldering,THT; on PCBs RoHS : Compliant |
| 620 | |
| 096522-1085 | ITT Interconnect Solutions | Connector: D-Sub |
| 13 | ||
| 5410853039242 | Panasonic Electronic Components | Battery: alkaline; C; 1.5V; non-rechargeable; 2pcs; BRONZE |
| 0 | ||
| 108 522 E | RUKO GmbH | Drill bit; core; Ø: 22mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 529 | RUKO GmbH | Drill bit; core; Ø: 29mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 559 E | RUKO GmbH | Drill bit; core; Ø: 59mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 01-085 | NEO TOOLS | Pliers; for circlip; external; 10÷25mm; Pliers len: 150mm; Ø: 1.3mm |
| 0 | ||
| MB 10857 SET | FIBOX | Multigate grommet; Holes no: 12; Kit: rivet set |
| 0 | ||
| LM1085RS-ADJ | HTC Korea | IC: voltage regulator; LDO,adjustable; 3A; TO252; SMD; LM1085; ±2% |
| 0 | ||
| SL1910852S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 52; THT; 3A; 250V; 2x26 |
| 0 | ||
| SLY108541G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 41; THT; 3A; 100V; 2mm RoHS : Compliant |
| 0 | ||
| 108 512 F | RUKO GmbH | Drill bit; core; Ø: 12mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 540 E | RUKO GmbH | Drill bit; core; Ø: 40mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 547 | RUKO GmbH | Drill bit; core; Ø: 47mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 549 F | RUKO GmbH | Drill bit; core; Ø: 49mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
![]() Ameya Holding Limited | TPS61085PWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant | 80,503 | ||
LM1085IS-5.0/NOPB![]() | Texas Instruments | TO-263//3A POSITIVE LOW DROPOUT REG RoHS : Compliant | 1,305 | |||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | TO-220//3A POSITIVE LOW DROPOUT REG RoHS : Compliant | 1,050 | |||
LM1085IS-12/NOPB![]() | Texas Instruments | LM1085IS-12/NOPB , LDO 电压调节器, 3A, 12 V输出, 2.6 → 18 V输入, 3针 TO-263封装 RoHS : Compliant | 1,000 | |||
LM1085ISX-5.0/NOPB![]() | Texas Instruments | IC REG LDO 5V 3A DDPAK RoHS : Compliant | 1,000 | |||
![]() ComSIT USA | LT1085CTPBF | LINEAR TECHNOLOGY/ANALOG DEVICES | AVAILABLE EU | 2 | ||
| 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | |||
| 3604H4M2*1085456 | DFXIAO | AVAILABLE EU | 4,300 | |||
ZXCT1085E5TA![]() | Diodes Incorporated | AVAILABLE EU RoHS : Compliant | 989 | |||
| LM1085ISX33NOPB | Texas Instruments | AVAILABLE EU | 225 | |||
![]() ComSIT USA | LD1085D2MR | STMicroelectronics | Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | ||
LD1085D2M18R![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 3,000 | |||
| LT1085IM36TR | Linear Technology | 3A LOW DROPOUT POSITIVE FIXED REGULATOR Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 1,118 | |||
LT1085CT![]() | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 1,019 | |||
| LD1085D2M33R | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 1,000 | |||
| LM1085ISADJ | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 472 | |||
| LD1085V | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 350 | |||
| LD1085V18 | SGS Semiconductor Ltd | 3AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar RoHS : Not Compliant | 250 | |||
| LM1085IT33 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 209 | |||
| LH1085 | Siemens | Electronic Component RoHS : Not Compliant | 200 | |||
| LM1085ISADJNOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 154 | |||
| 2510108530 | Wieland Electric GmbH | Electronic Component RoHS : Not Compliant | 143 | |||
| AZ1085S18EI | Diodes-BCD | Electronic Component RoHS : Compliant | 125 | |||
| LM1085IT12 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 109 | |||
| LT1085CTPBF | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Compliant | 88 | |||
![]() GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
![]() Interstate Connecting Components | 1-2273108-5 | TE Connectivity | M8 STRGHT PLUG TO M12 STRGT SO RoHS : Compliant |
| 0 | |
| 20010850-00 | TE Connectivity | PCA-375-100 05BL5M | 0 | |||
| 10127721-085LF | Amphenol FCi | 10127721-085LF-MTK 3.0 08P DR | 0 | |||
| 11108544-00 | TE Connectivity | AST4530I00069H4X9353:CTO-13000 | 0 | |||
| 440HS148M2108-5S | Glenair Inc | BANDING CRIMP ADAPTER |
| 0 | ||
| 710-858NF141212BT | Glenair Inc | 0 | ||||
| 710-858NF323232 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 217-1085-001 | ITT Interconnect Solutions | NUT PV7G-24 JAM | 0 | |||
| 11108599-00 | TE Connectivity | AST45PT5L00050P4X1N003:CTO-130 | 0 | |||
| 120-108-56B | Glenair Inc | CONDUIT UNSHIELDED | 0 | |||
| 447HS361NF2108-5S30 | Glenair Inc | 0 | ||||
| EK1085-000 | TE Connectivity | TXR54AZ00-0806AI RoHS : Compliant | 0 | |||
| 11108507-00 | TE Connectivity | AST4520Y00015P4X1354-SS:CTO-13 | 0 | |||
| 11108552-00 | TE Connectivity | AST4530I00208H4X9354:CTO-13000 | 0 | |||
| 11108589-00 | TE Connectivity | AST45PT3L00005P4X1H065:CTO-130 | 0 | |||
![]() NexGen Digital | LT1085CT-3.3![]() | Linear Technology | RoHS : Not Compliant | 15 | ||
![]() PEI Genesis | 217-1085-001 | ITT Interconnect Solutions |
| 0 | ||
| 4214108-57 | SOURIAU-SUNBANK |
| 0 | |||
| C10-117931-085 | Amphenol Corporation |
| 0 | |||
| C10-123011-085 | Amphenol Corporation |
| 0 | |||
| C146-21R010-854-4 | Amphenol Tuchel |
| 0 | |||
| M85049/10-85W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/10-85W | Amphenol PCD |
| 0 | |||
| C146-10R010-852-1 | Amphenol Tuchel |
| 0 | |||
| TP1085-1 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 110855-0013 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| J1085B-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| TP1085 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1085-3 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 4214108-5 | SOURIAU-SUNBANK |
| 0 | |||
| D110853-1 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 1310851-1 | TE Connectivity | SMB RoHS : Compliant |
| 443 | |
| DW-05-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 166 | ||
| DW-08-14-T-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 124 | ||
| TMS-108-51-T-S | Samtec Inc | .050 x .100 Micro Terminal Strip RoHS : Compliant |
| 123 | ||
| HTMS-108-53-G-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| TMS-108-51-S-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| HTMS-108-52-G-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| MTMS-108-51-T-S-155 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| TMS-108-53-L-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| MTMS-108-55-S-D-250 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 111 | ||
| TMS-108-58-G-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 102 | ||
| ESQ-108-58-G-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 60 | ||
| EK1085-000 | TE Connectivity | Tinel-Lock RoHS : Compliant |
| 50 | ||
| RP1085 | Hammond Manufacturing | ABS WATERTIGHT |
| 34 | ||
| ESW-108-59-G-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 32 | ||
![]() Chip 1 Exchange | 66108-5 | TE Connectivity | INSTOCK RoHS : Compliant | 93,600 | ||
| 26-48-1085 | Molex | INSTOCK RoHS : Compliant | 17,843 | |||
LM1085IS-ADJ/NOPB![]() | Texas Instruments | INSTOCK RoHS : Compliant | 13,507 | |||
| 5-2324108-5 | TE Connectivity | INSTOCK RoHS : Compliant | 7,888 | |||
| 3-1419108-5 | TE Connectivity | INSTOCK RoHS : Compliant | 2,970 | |||
| L1085DG | Niko Semicondutor Co Ltd | INSTOCK | 2,059 | |||
| LT1085CT | INSTOCK | 2,032 | ||||
| ACS108-55N | INSTOCK | 880 | ||||
| TEA1085/C1 | Philips Semiconductors | INSTOCK | 510 | |||
| PT12-B1-1-11.10857 | INSTOCK | 500 | ||||
| LD1085D2T33R | Intel Corporation | INSTOCK | 464 | |||
| LH701085 | Sharp Microelectronics of the Americas | INSTOCK | 200 | |||
| TEA1085C1 | Philips Semiconductors | INSTOCK | 194 | |||
| TDA1085A | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 190 | |||
| LTA-1085 | INSTOCK | 116 | ||||
![]() Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1085843 | Phoenix Contact | MSTBTP 25 4ST 35CP13BD54 MSTBTP254ST35CP13BD54 (Alt: 1085843) RoHS : Compliant | 0 | |||
| 1085492 | Phoenix Contact | PTS 15 9PH50 GY PTS159PH50GY (Alt: 1085492) RoHS : Compliant | 0 | |||
| 1891085-1 | TE Connectivity | AMP18910851 (Alt: 1891085-1) RoHS : Not Compliant | 0 | |||
| 108505710 | OmniOn Power Inc | (Alt: 108505710) RoHS : Not Compliant | 0 | |||
| 1108540-1 | TE Connectivity | HIPK2464STO221G (Alt: 1108540-1) RoHS : Compliant | 0 | |||
| 1310851-1 | TE Connectivity | Conn SMB RCP 50Ohm Solder ST ThruHole Gold (Alt: 1310851-1) RoHS : Compliant | 0 | |||
| 1310851-1 | TE Connectivity | Conn SMB RCP 50Ohm Solder ST ThruHole Gold (Alt: 1310851-1) RoHS : Compliant | 0 | |||
| 1108573-5 | TE Connectivity | (Alt: 1108573-5) RoHS : Compliant | 0 | |||
| CV1085-000 | TE Connectivity | (Alt: CV1085-000) RoHS : Compliant | 0 | |||
| 10-06-1085 | Molex | (Alt: 10061085) RoHS : Compliant | 0 | |||
| 1-2273108-5 | TE Connectivity | (Alt: 1-2273108-5) RoHS : Compliant | 0 | |||
| 11108552-00 | TE Connectivity | AST4530I00208H4X9354CTO1300000002 (Alt: 11108552-00) | 0 | |||
![]() Avnet Asia | BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | |
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| VSMA1085250 | Vishay Intertechnologies | (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| 2150711085 | Molex | (Alt: 2150711085) RoHS : Compliant | 0 | |||
| 10127721-085SLF | Amphenol Corporation | Connector Power Header 8 Position 3mm Solder Straight Through Hole 8 Terminal 1 Port Tray (Alt: 10127721-085SLF) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 811085-000 | TE Connectivity | (Alt: 811085-000) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | Connector Power Header 8 Position 3mm Solder Straight Through Hole 8 Terminal 1 Port T/R (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| 2108517-2 | TE Connectivity | Stamped Antenna, Dual Band, 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.875 GHz, Surface Mount (Alt: 2108517-2) RoHS : Compliant | 0 | |||
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 301085589 | Qnity Laird | (Alt: 301085589) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LD1085D2M25R![]() | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
LD1085D2M18R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
LD1085V50![]() | STMicroelectronics | LDO Regulator Pos 5V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V50) RoHS : Compliant | 0 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| KMX64-1085 | ROHM Semiconductor | (Alt: KMX64-1085) RoHS : Compliant | 0 | |||
| OM11085,598 | NXP Semiconductors | IAR LPC1114 Series Microcontroller Evaluation Board (Alt: OM11085,598) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
| STA1085EOA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA TR (Alt: STA1085EOA3TR) RoHS : Compliant | 0 | |||
| STA1085POA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 600MHz 33V 361Pin LFBGA TR (Alt: STA1085POA3TR) RoHS : Compliant | 0 | |||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 4Pin3Tab SOT223 TR (Alt: TC1108-5.0VDBTR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | 1085A | Essentra Components | PLUG 2.020 - 2.100 CAP 2.140 | 0 | ||
| E3-121-085 | Southco | 0 | ||||
| E5-1-085-021 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1011-0859 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-1-085-020 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-101 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10852 | Heyco | HCPS-18 NATURAL | 0 | |||
| 110859 | Essentra Components | 0 | ||||
| OPT2-610-8.5 | SHEREX FASTENING SO | 0 | ||||
| E5-1-085-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-170 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-190 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 110854 | Essentra Components | 0 | ||||
| 07005-01085 | Avdel | POLY TUBE BLUE DIA 6 X 153MM | 0 | |||
| E5-1-085-051 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | LD1085V![]() | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
LD1085V50![]() | STMicroelectronics | LDO Regulator Pos 5V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V50) RoHS : Compliant | 0 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| STA1085EOATR | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOATR) RoHS : Compliant | 0 | |||
| P3T1085UK-ARD | NXP Semiconductors | Evaluation Board P3T1085UK Digital Temperature Sensor Sensor (Alt: P3T1085UK-ARD) RoHS : Compliant | 0 | |||
| VSMA1085750X02 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm e3 (Alt: VSMA1085750X02) RoHS : Compliant | 0 | |||
| SIM7912G-M2 S2-1085D | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085D) RoHS : Compliant | 0 | |||
| SIM7906E-PCIE S2-1085H | SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 33V to 43V 30mm x 51mm x 43mm (Alt: SIM7906E-PCIE S2-1085H) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3102A-22(621)(0850) | Amphenol Industrial Operations |
| 1,835 | ||
| 97-3102A-20(621)(0850) | Amphenol Industrial Operations |
| 660 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 586 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 586 | |||
| 97-3102A-16(621)(0850) | Amphenol Industrial Operations |
| 505 | |||
| 97-3102A-16(621)(0850) | Amphenol Industrial Operations |
| 505 | |||
| 97-3106A-18(621)(0850) | Amphenol Industrial Operations |
| 259 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3108B-14S(621)(0850) | Amphenol Industrial Operations |
| 72 | |||
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations |
| 50 | |||
| 97-3108A-16S(621)(0850) | Amphenol Industrial Operations | 25 | ||||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3108A-28(621)(0850) | Amphenol Industrial Operations | 1 | ||||
![]() Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant | 4,000 | ||
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today | 1,568 | |||
![]() Master Electronics | 680-1085-6-00 | Hirose Electric Co Ltd | Socket Contact - DF22 Series - 14 to 16 AWG - 8.00µin (0.203µm) Gold Contact Finish - Crimp Termination - 2500 Pcs. Per Reel. RoHS : Compliant |
| 2,000 | |
| 1085267 | Phoenix Contact | Thermal transfer printer for card materials - including Euro/US power cable and USB cable. Support CD includes user manuals in several languages - links to firmware - drivers - and planning and marking software. User manual printed in German and English. Magazine for UCT-TM... sheets and magazines for US-... cards. One Pcs./Pkt. each UCT-TM 6 - US-EMLP (85 6x54) - ink ribbon = 50 m RoHS : Compliant |
| 1 | ||
| TMS-108-51-T-S | Samtec Inc | Conn Unshrouded Header HDR 8 POS 1.27mm Solder ST Top Entry Thru-Hole Tube RoHS : Compliant |
| 0 | ||
| TW-12-07-L-D-611-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RP1085 | Hammond Manufacturing | enclosure - plastic RoHS : Compliant |
| 0 | ||
| 096522-1085 | ITT Interconnect Solutions | MDM96522-1085; Micros; Micro RoHS : Compliant |
| 0 | ||
| 1-2273108-5 | TE Connectivity | M8 STRGHT PLUG TO M12 STRGT SOCKET AA MOQ Reduction RoHS : Compliant |
| 0 | ||
| 20010850-00 | TE Connectivity | PCA-375-100 05BL5M MOQ Reduction RoHS : Compliant |
| 0 | ||
| S1SS-05-30C-GF-10.85-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RCV-00108577 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| PTT-11085 | BUD Industries Inc | Abs- 10 side terminal block box(75x125x43 mm) - External 4.92 x 2.96 x 1.69 Inches - Internal 4.65 x 2.69 x 1.46 Inches RoHS : Compliant |
| 0 | ||
| 1085186 | Phoenix Contact | HC-LSM-M4 RoHS : Compliant |
| 0 | ||
| 1085799 | Phoenix Contact | EV-T2CCS-MF-M4X10-BIT-CTS RoHS : Compliant |
| 0 | ||
| 11108544-00 | TE Connectivity | AST4530I00069H4X9353:CTO-13000000-02 MOQ Reduction RoHS : Compliant |
| 0 | ||
| ZML-108-53-G-D-700-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1085219 | Phoenix Contact | Industrial Ethernet Switch, 16 RJ45 ports with 10/100/1000 Mbps, FL SWITCH 1116N RoHS : Compliant |
| 123 | |
| 1085 | Adafruit Industries | Data Conversion IC Development Tools ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic |
| 50 | ||
| 1085163 | Phoenix Contact | Ethernet Modules FL SWITCH 1105NT RoHS : Compliant |
| 50 | ||
| 1085488 | Phoenix Contact | Mounting Hardware FL Panel Adapter 22.5 RoHS : Compliant |
| 50 | ||
| 1085173 | Phoenix Contact | Ethernet Switch, 4 RJ45 10/100/1000 Mbps, 1 SFP 100/1000 Mbps (full duplex), FL SWITCH 1104N-SFP RoHS : Compliant |
| 50 | ||
| 1085254 | Phoenix Contact | Industrial Gigabit Ethernet Switch, 5x10/100/1000 Mbps Ports, Unmanaged, FL SWITCH 1105N RoHS : Compliant |
| 50 | ||
| 1085256 | Phoenix Contact | Industrial Ethernet Switch, 8 Port with 10/100 Mbps, Unmanaged, FL SWITCH 1008N RoHS : Compliant |
| 50 | ||
| 1085800 | Phoenix Contact | EV Charger Accessories EV-T1CCS-MF-M4X10 |
| 14 | ||
| 610851F00000 | Boyd Corporation | Heat Sinks 8FT EXTRUSION 1.31 X 5.38 X 8 |
| 12 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET,SGS-SA2Z W F3 24V, 24V RESET |
| 3 | ||
| 116210-85 | AMETEK Inc | Vacuum Motor, Ametek Lamb, 120V, 5.7", 2-stage, tangential, 9A |
| 1 | ||
| 1085776 | Phoenix Contact | I/O Modules Plug for cold junction compensation for thermocouples in combination with MACX MCR(-EX)-TC... temperature transducers RoHS : Compliant |
| 0 | ||
| B6-30-10-85 | ABB Low Voltage Products and Systems | Mini Contactor, 3P, Control: 380-415VAC, Main: 3NO, Aux: 1NO, Screw Terminals, GJL1211001R8105 |
| 0 | ||
| 1085177 | Phoenix Contact | Ethernet Modules FL SWITCH 1004N-SFX RoHS : Compliant |
| 0 | ||
| 1085170 | Phoenix Contact | Industrial Ethernet Switch, 5 RJ45 ports with 10/100 Mbps on all ports, FL SWITCH 1005NT RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10858 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10858 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 50 | ||
| PE3C10850-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10852 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Right Angle Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10852 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 4 | |||
| PE3C10852-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-12 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-12 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-12 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-12 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 4 | ||
| PE3C10855-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10855-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-24 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-24 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-24 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10851-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-9 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-9 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Non-Magnetic Cable 60 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-60 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-60 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-60 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. C Female to N Female Cable 72 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 72 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 72 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-72 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-72 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-72 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-72 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10854-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-9 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-9 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-9 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. | 0 | |||
| PE3W10855 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C10854-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-12 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-12 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-12 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10852-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-18 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-18 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-18 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-18 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-36 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 61085-1 | TE Connectivity | .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity RoHS : Compliant |
| 5,449 | |
| 1-66108-5 | TE Connectivity | III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity RoHS : Compliant |
| 4,000 | ||
| 141085-2 | TE Connectivity | TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity RoHS : Compliant |
| 3,210 | ||
| 2108504-1 | TE Connectivity | 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity RoHS : Compliant |
| 2,405 | ||
| 1-2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity RoHS : Compliant |
| 88 | ||
| 2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Vyrian | 746-108-525-601 | EDAC Inc | Card Edge Connector, 108 Contact(s), 2 Row(s), Female, Straight, 0.125 inch Pitch, Solder Terminal, Black Insulator RoHS : Compliant | 12,655 | ||
| LT1085CT-12-PBF | Analog Devices Inc | 11,727 | ||||
| 5962-01-085-3467 | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 10V, Trim/Adjustable, MBCY8 RoHS : Not Compliant | 10,812 | |||
| 345-108-525-588 | EDAC Inc | Card Edge Connector, 108 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Guide Set, Green Insulator RoHS : Compliant | 9,782 | |||
| BUK108-50DL | Nexperia | Buffer/Inverter Based Peripheral Driver RoHS : Compliant | 9,498 | |||
5962-01-085-1442![]() | Analog Devices Inc | D/A Converter, 1 Func, CDIP18 RoHS : Not Compliant | 7,380 | |||
| LT1085IM-PBF | Analog Devices Inc | 6,546 | ||||
| 1085488 | Phoenix Contact | RoHS : Compliant | 6,419 | |||
| LM1085I-ADJMDC | Texas Instruments | 1.5V Dropout, BIPolar RoHS : Compliant | 5,378 | |||
TVP3010-85FNR![]() | Texas Instruments | Palette DAC, 1600 X 1280 Pixels, CMOS, PQCC84 RoHS : Not Compliant | 5,272 | |||
MAX1085AESA![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant | 5,128 | |||
| 5962-01-085-7965 | Texas Instruments | OTP ROM, 256X8, 70ns, TTL, PDIP20 RoHS : Not Compliant | 3,625 | |||
| 1.15.108.551/0000 | Rafi & Kg | Pushbutton Switch | 895 | |||
| 25.161.0853.0 | Wieland Electric | Strip Terminal Block, 16A, 4mm2, 1 Row(s), 1 Deck(s) | 889 | |||
| 61085 | Boyd | Heat Sink | 683 | |||
![]() Waytek, Inc. | 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 7,443 | |
![]() Win Source Electronics | TPS61085DGKRG4![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 163,990 | |
TPS61085DGKR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 100,000 | ||
TPS61085ATDGKRQ1![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 50,000 | ||
| CLA4611-085LF | Skyworks Solutions Inc | 2 X 2 QFN PIN LIMITER DIODE RoHS : Compliant |
| 50,000 | ||
LM1085ISX-ADJ![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK RoHS : Not Compliant |
| 31,500 | ||
LM1085IS-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 28,480 | ||
TPS61085TPWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 22,000 | ||
TPS61085PW![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 13,446 | ||
LM1085IS-3.3![]() | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 8,810 | ||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 5,740 | ||
| LM1085RS-ADJ | HTC Korea |
| 5,273 | |||
| 52207-1085 | Molex | 1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging RoHS : Compliant |
| 3,610 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 1,027 | ||
LT1085CT![]() | Linear Technology | LT1085 - 1 to 60 MHz, Stratum 3 RoHS : Not Compliant |
| 1,000 | ||
LT1085CM-3.3![]() | Linear Technology | 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators RoHS : Not Compliant |
| 620 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |