 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1132-P-AB3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Ameya Holding Limited | MSP430F1132IDWR | Texas Instruments | SOIC20/I°/16-bit Ultra-Low-Power Microcontroller, 8kB Flash, 256B RAM, 10 b RoHS : Compliant | 35,325 | ||
 ComSIT USA | MAX11328ATJ+ | Analog Devices Inc | AVAILABLE EU RoHS : Compliant | 1,447 | ||
| FAB0113202ESFE | SHENNAN CIRCUITS-LG2 CHINA | AVAILABLE EU | 3 | |||
 PUI | 2113-2X35G00S/2.8/5.0/22. | 197 | ||||
 Richardson RFPD | MAAM-011322-TR1000 | MACOM | RF MW DRIVER AMPLIER RoHS : Compliant |
| 994 | |
| MAAM-011326:MW | MACOM | 21 dB Gain Amplifier, Die RoHS : Compliant |
| 587 | ||
| SI5341B-D11329-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5394E-A11327-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 644.53125MHz RoHS : Compliant | 0 | |||
| SI5332DD11324-AM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| RFB-1132 | RF Industries | BNC Male to BNC Female Right angle Adapter RoHS : Not Compliant |
| 0 | ||
| CCPD-033-50-161.1328 | Crystek Corporation | 5X7mm SMD LVPECL Clock Oscillator RoHS : Compliant | 0 | |||
| MAAP-011327-DIE | MACOM | RF & MW POWER AMPLIF RoHS : Compliant |
| 0 | ||
| CER1132A | CTS Corporation | Surface Mount Ceramic Bandpass Filter RoHS : Compliant | 0 | |||
| 514CCC001132AAG | Skyworks Solutions Inc | Oscillator XO 4.096MHz ±30ppm CMOS 52% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| SI5395J-A11325-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| K311113218SK0L140 | Kendeil srl | FILM CAPACITOR RoHS : Compliant | 0 | |||
| A-1PA-113-204B2 | Amphenol Corporation | Cable Assembly 1.13mm Cable 0.204m AMC to AMC PL-P RoHS : Compliant |
| 0 | ||
| SI51210-B11323-GM | Skyworks Solutions Inc | Clock Generator 3MHz to 165MHz-IN 170MHz-OUT 6-Pin RoHS : Compliant | 0 | |||
| HMC1132PM5ETR | Analog Devices Inc | RF Amp Single Power Amp 32GHz 6V 32-Pin LFCSP EP T RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | CR32A1132FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 10,000 | |
| CR0805F1132T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| RN50C1132F | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,150 | ||
| RR1220P-1132-B-M | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 1,000 | ||
| M39014/01-1327 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 113 | ||
| M39014/01-1323 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 51 | ||
| M39014/01-1327 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 45 | ||
| M39014/01-1321 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 42 | ||
| RFB-1132 | RF CONNECTOR | IN STOCK SHIP TODAY |
| 40 | ||
| M39014/01-1321 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 37 | ||
| M39014/01-1323 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| M39014/01-1326 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| JAN1N1132 | Alpha Industries | IN STOCK SHIP TODAY | 3 | |||
| KD1206PTB1-13.2(2).F.GN | SUNON USA | IN STOCK SHIP TODAY |
| 1 | ||
| G-1132-0003 | CW Industries | IN STOCK SHIP TODAY |
| 1 | ||
 Pasternack Enterprises US | PE36113-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm 1.6/5.6 Plug Cable 24 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 24 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 24 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and 1.6/5.6 cable connection on the other. Our 1.6/5.6 to 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36113-24, can also be known as a 1.6/5.6 male to 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36113-24 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to 1.6/5.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 male to 1.6/5.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 24 inch length using 75 Ohm RG187 coax. |
| 95 | |
| PE6TR1132 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.25:1, Maximum Power: 5 Watt. 5 Watt RF Load (Termination) Up to 12.4 GHz With N Male Input Aluminum Body. Pasternack's PE6TR1132 RF load termination (also known as a dummy load) has a N male connector. This Pasternack 5 watt N male load / termination is rated for a maximum frequency of 12.4 GHz. Our N male termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. This N coax terminator is manufactured with a aluminum housing body. Pasternack's 50 Ohm N coaxial termination has a maximum input power of 5 Watts and a maximum VSWR of 1.25:1. Additional N male RF load specs for this component can be found on its radio frequency termination load PDF specification datasheet above. Pasternack's PE6TR1132 has a N connector and is designed to withstand temperatures between -55 to +85 deg C. This RF load termination has a 5 Watts and a maximum input power and 1,000 Watts peak power. Our coax termination is suitable for WIFI 6E, 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication applications. Pasternack is where to buy a 12.4 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt N male load termination is one of over 40,000 RF, microwave, and millimeter wave components in-stock at Pasternack. Our N male 5 watt termination load will ship worldwide the same day as purchased. |
| 4 | ||
| PEWCA1132 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-510, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 1.45 GHz, Maximum Frequency: 2.2 GHz, Maximum VSWR: 1.25:1. WR-510 CPR510F Flange to N-Type Female Waveguide to Coax Adapter Operating From 1.45 GHz to 2.2 GHz. The PEWCA1132 WR-510 waveguide to coax adapter is also known as a WR-510 waveguide transition. This Pasternack waveguide to coax adapter/transition is constructed as a WR-510 to type N connector and a female gender. Our right angle WR510 to type N waveguide to coaxial cable transition/adapter has a minimum frequency of 1.45 GHz and a maximum frequency of 2.2 GHz. This PEWCA1132 transition adapter for coax from Pasternack is designed with a waveguide material of aluminum and has chromate conversion plating. The right angle waveguide adapter transition has a maximum VSWR of 1.25:1 and a maximum insertion loss of 0.2 dB. Our WR510 to type N female waveguide to coax adapter is manufactured to precise radio frequency industry specs, and you can find more waveguide adapter/transition datasheet specifications above. Pasternack’s PEWCA1132 WR510 waveguide to coax adapter/transition is suitable for applications including test benches, radar, satellite, microwave radio systems, military and space and communication systems. Our WR510 to type N waveguide to coax adapter operates at temperatures ranging from -40 deg C to 70 deg C. This WR510 waveguide adapter transition features a maximum peak power of 5,000 Watts. This PEWCA1132 is available in a grey paint finish. This WR510 waveguide to N type transition adapter to coax PEWCA1132 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-510 waveguide adapter transition with a type N interface can ship worldwide the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and trained sales team can get you the ideal WR-510 waveguide to coax adapter as per your requirements. |
| 3 | ||
| PE3W11322 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11326 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using PE-P195 Coax. PE3C11326 is a SMA male to TNC male cable using PE-P195 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11326 SMA male to TNC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W11132 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE51113-2 | Pasternack Enterprises | Key Specifications, Antenna Type: Mobile, Polarization: Vertical, Minimum Frequency: 880 MHz, Maximum Frequency: 2.17 GHz, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 3 dB, Maximum Input VSWR: 2:1. Mobile Dual Band Antenna Operates From 880 MHz to 2.17 GHz With a Nominal 3 dBi Gain N Female Input Connector. Mobile antenna PE51113-2 from Pasternack is part of our extensive in-stock omni-directional radio antenna selection. This dual band mobile antenna has a frequency range of 880 MHz to 965 MHz, 1.71 GHz to 2.17 GHz and a 3 nominal dBi gain. Our mobile antenna uses N input and is rated for 50 Watts input. PE51113-2 mobile radio antenna is one of over 40,000 RF, microwave and millimeter wave components supplied from Pasternack. Our mobile aerial can be bought and shipped worldwide the same-day as with our other in-stock RF parts. |
| 0 | ||
| PE3C11327 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Right Angle Cable Using LMR-240-UF Coax. PE3C11327 is a BNC male to SMA male right angle cable using LMR-240-UF coax. This Pasternack BNC male to SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11327 BNC male to SMA male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11321LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11325 | Pasternack Enterprises | 0 | ||||
| PE3W11329/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Cable Using LMR-240 Coax with HeatShrink. PE3W11329/HS is a 7/16 DIN male right angle to N male cable using LMR-240 coax. This Pasternack 7/16 DIN male right angle to N male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. 7/16 DIN right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11329/HS 7/16 DIN male right angle to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11325 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W11324 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11321 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Male to TNC Female Cable Using RG8 Coax. PE3C11321 is a N male to TNC female cable using RG8 coax. This Pasternack N male to TNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11321 N male to TNC female cable assembly is constructed with RG8 coax. | 0 | |||
| PE3W11328 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. SMA Male to 7/16 DIN Male Right Angle Cable Using LMR-400-DB Coax. PE3W11328 is a SMA male to 7/16 DIN male right angle cable using LMR-400-DB coax. This Pasternack SMA male to 7/16 DIN male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. SMA to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11328 SMA male to 7/16 DIN male right angle cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Venkel Ltd. | MELFC0102-RZ-1132FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�15PPM;11.3K;�1% RoHS : Compliant | 0 | ||
| MELFC0102-UC-1132DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;11.3K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XZ-1132FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�15PPM;11.3K;�1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1132AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;11.3K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1132DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;11.3K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1132AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;11.3K;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-RN-1132UT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;11.3K;�0.01% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1132AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;11.3K;�0.05% RoHS : Compliant | 0 | |||
| PWCR0603-QK-1132DT | VENKEL LTD | Pulse Withstanding CR;0603;1/10W;�100PPM;11.3K;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-JK-1132FT | VENKEL LTD | Pulse Withstanding CR;2512;2W;�100PPM;11.3K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZN-1132FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�10PPM;11.3K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-1132BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;11.3K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-1132BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;11.3K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-1132DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;11.3K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1132AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;11.3K;�0.05% RoHS : Compliant | 0 | |||
 Waytek, Inc. | C1132/20 SA5005 | APM HEXSEAL | APM Hexseal C1132/20 black half toggle boot protects toggle switch bushings from weather and salt spray while allowing the round handle to protrude. It features black silicone rubber construction, 15/32-32 thread sizing, and a half-boot sealing style. |
| 2,457 | |
| C1132/20 2501 | APM HEXSEAL | APM Hexseal C1132/20 2501 gray half toggle switch boot protects the toggle bushing while leaving the bat handle exposed. It fits 15/32-32 thread toggle switches, accepts 0.155"-0.240" toggle diameters, and provides a gray sealing boot option for illuminated or standard toggles. |
| 570 | ||
 Win Source Electronics | KK23011-32-7H | Foxconn Interconnect Technology Limited | Connector Receptacle IPEX Male Pin Surface Mount RoHS : Compliant |
| 450,000 | |
| 0402WGF1132TCE | Royal Electronic Factory (Thailand) Co Ltd | 0402WGF1132TCE Royalohm Thick Film Resistors - SMD RMC 0402 1/16W 1% T/R-10000 datasheet, inventory, & pricing. RoHS : Compliant |
| 83,000 | ||
S-1132B30-I6T2G | ABLIC Inc. | IC REG LDO 3V 0.3A SNT6A RoHS : Compliant |
| 59,000 | ||
| S-1132B33-I6T2G | ABLIC Inc. | IC REG LDO 3.3V 0.3A SNT6A RoHS : Compliant |
| 25,000 | ||
| CN113-230-0001(01)VE | Yamaichi Electronics Co Ltd | 230-PIN, 0.5MM PITCH INFOTAINMEN / 230 Position Female Connector Gold-Nickel 0.020" (0.50mm) Black |
| 3,571 | ||
| 74271132 | Wurth Elektronik | FERRITE CORE 241 OHM HINGED RoHS : Compliant |
| 1,021 | ||
| HMC1132PM5ETR | Analog Devices Inc | IC RF POWER AMP 32LFCSP / RF Amplifier IC 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 950 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand