1253-R2 Price, Distributor, Stock

Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm 1.6/5.6 Plug Right Angle to 75 Ohm 1.6/5.6 Plug Right Angle Cable 12 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.6/5.6 cable connection on one end and right angle 1.6/5.6 cable connection on the other. Our right angle 1.6/5.6 to right angle 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36125-12, can also be known as a right angle 1.6/5.6 male to right angle 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36125-12 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with right angle 1.6/5.6 to right angle 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 right angle plug to 1.6/5.6 right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 right angle male to 1.6/5.6 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

191

PE3FCA231-25M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM5 Multimode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Lime Green-25M. Pasternack’s PE3FCA231-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our lime green fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA231-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements.

1 : $226.99
5 : $217.91
10 : $208.83
25 : $199.75

132

PE3FCA551-25M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA551-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with SC/APC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA551-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $162.99
5 : $156.47
10 : $149.95
25 : $143.43

103

PE3W01125-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Right Angle Cable 9 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W01125-9 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W01125-9 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3FCA201-25M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OM4 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA201-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA201-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $175.99
5 : $168.95
10 : $161.91
25 : $154.87

PE36125-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm 1.6/5.6 Plug Right Angle to 75 Ohm 1.6/5.6 Plug Right Angle Cable 60 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.6/5.6 cable connection on one end and right angle 1.6/5.6 cable connection on the other. Our right angle 1.6/5.6 to right angle 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36125-60, can also be known as a right angle 1.6/5.6 male to right angle 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36125-60 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with right angle 1.6/5.6 to right angle 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 right angle plug to 1.6/5.6 right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 right angle male to 1.6/5.6 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3C5125

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using RG58 Coax., Radio frequency assembly N male to SMA male right angle cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SMA male right angle cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle SMA cable connection on the other. Our N type to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5125, can also be known as a type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5125 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency type N male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5125 can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. N type plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle cable using RG58 coax.

PE3W06125LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W06125LF/HS-48 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W06125LF/HS-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06125LF/HS-48 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

PE3W12532LF

Pasternack Enterprises

PE3W12573LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-195-UF Coax, LF Solder., Radio frequency assembly N male to SMA male low loss cable 24 inch length using LMR-195-UF coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using LMR-195-UF coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12573LF-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12573LF-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W12573LF-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12573LF-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $60.99
10 : $59.77
25 : $58.55
100 : $57.33

PE3W12590

Pasternack Enterprises

PE3W21257/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W21257/HS is a MCX plug right angle to BNC male right angle cable using LMR-100A coax. This Pasternack MCX plug right angle to BNC male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. MCX right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21257/HS MCX plug right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W01254/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug Right Angle to 75 Ohm TNC Female Bulkhead Cable Using 75 Ohm RG179 Coax with HeatShrink. PE3W01254/HS is a SMB plug right angle to TNC female bulkhead cable using RG179 coax. This Pasternack SMB plug right angle to TNC female bulkhead cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm TNC for connector 2. SMB right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W01254/HS SMB plug right angle to TNC female bulkhead cable assembly is constructed with RG179 coax.

PE3W03125/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W03125/HS-48 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W03125/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03125/HS-48 can also be used in the other direction and will be SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink.

1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24

PE3W08125/HS

Pasternack Enterprises

Teledyne HiRel

CY37128P84-125JI

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 125 MHZ

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

CY37128P160-125AXI

Teledyne HiRel

CPLD ULTRA37000 3.8K GATES 128 MCRCLLS 125MHZ

Venkel Ltd.

PHCR2512-504JKB

VENKEL LTD

Precision-High Value CR;2512;500K;�5%;100PPM
RoHS : Compliant

CRG0603-Q-125JT

VENKEL LTD

RoHS 10/10 Green CR;0603;1/10W;1.2M;�5%
RoHS : Compliant

HVCR0402-16W-125JT

VENKEL LTD

High Voltage CR;0402;1/16W;1.2M;�5%
RoHS : Compliant

MLF2012-5R6KT

VENKEL LTD

Multilayer Chip Inductor;0805;5.6uH;�10%
RoHS : Compliant

AGCR0603-QL-125JT

VENKEL LTD

Auto Grade Resistor;0603;1/10W;�200PPM;1.2M;�5%
RoHS : Compliant

PHCR2512-505BCT

VENKEL LTD

Precision-High Value CR;2512;5M;�0.1%;50PPM
RoHS : Compliant

PHCR2512-505FCT

VENKEL LTD

Precision-High Value CR;2512;5M;�1%;50PPM
RoHS : Compliant

AGCR2010-WL-125JT

VENKEL LTD

Auto Grade Resistor;2010;3/4W;�200PPM;1.2M;�5%
RoHS : Compliant

TA035TCR226KER0125

VENKEL LTD

Tantalum Chip Capacitor;35V;TCR;22uF;10%;E;125mohm
RoHS : Compliant

CRG0805-R-125JT

VENKEL LTD

RoHS 10/10 Green CR;0805;1/8W;1.2M;�5%
RoHS : Compliant

TA035TCR226KDR0125

VENKEL LTD

Tantalum Chip Capacitor;35V;TCR;22uF;10%;D;125mohm
RoHS : Compliant

PWCR1210-VK-125JT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;1.2M;�5%
RoHS : Compliant

HVCR0805-8W-125JT

VENKEL LTD

High Voltage CR;0805;1/8W;1.2M;�5%
RoHS : Compliant

CRG0201-N-125JT

VENKEL LTD

RoHS 10/10 Green CR;0201;1/20W;1.2M;�5%
RoHS : Compliant

SWCR2512-ZK-125KT

VENKEL LTD

Surge Withstanding CR;2512;1.5W;�100PPM;1.2M;�10%
RoHS : Compliant

Waytek, Inc.

DFN1.25BK 50' SPOOLS

Techflex Inc

Techflex Heavy-Duty Dura-Flex Sleeving DF1.25BK 50' SPOOLS is black 1.25" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments.

50 : $1.5202
250 : $1.3714

3,250

5550125RD00R5

ShawCor Ltd

DSG-Canusa 5550125RD00R5 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .125" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1,000 : $1.0169
5,000 : $0.9574

3,000

4200125CL0048

ShawCor Ltd

DSG-Canusa CPX-100 100 0125 clear polyolefin heat shrink tubing is clear tubing with a .125" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $1.5362
50 : $1.3271
100 : $1.2044
200 : $1.1044
500 : $1.0408

973

4200125BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 1/8" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $1.4925
50 : $1.2893
100 : $1.1702
200 : $1.073
500 : $1.0112

422

MRBF-125

Eaton Electronics

125A Bussmann MRBF 58V Marine Automotive Battery Fuse SAEJ1117 ISO 8820-3 IP66

1 : $13.05
10 : $12.56
50 : $12.12
100 : $11.14
200 : $10.69
500 : $9.35

362

SDN1.25BK 250

Techflex Inc

Techflex SDN1.25BK 250 Flexo Super Duty Braided Sleeving is black 1.25" nylon sleeving on a 250' spool. It features 20 mil braided construction, fits expansion ranges from 1-1/4" to 2", and resists gasoline, UV, solvents, salt water, and chemicals for high-abrasion applications.

250 : $1.8848
1,250 : $1.643

250

29005-1.25

FTZ Industries

FTZ Industries 29005-1.25 dual-wall adhesive-lined heat shrink tubing is black polyolefin tubing with a 3/16" size in 1-1/4" lengths for sealing and protecting wires, splices, and terminals. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental sealing.

1 : $10.71
5 : $9.55

892-1251-210-50

Trombetta

12V Isolated DC Contactor Intermittent Duty

1 : $9.18
10 : $8.28
50 : $7.61
100 : $7.33
200 : $7.1
500 : $6.92

26006-1.25B

FTZ Industries

FTZ Industries 26006-1.25B thin-wall heat shrink tubing is black polyolefin tubing with a 1/4" size in 1-1/4" lengths and a 2:1 shrink ratio for wire, terminal, and splice protection. Its flexible thin-wall construction supports clean shrink coverage and dependable insulation, with 1,000 pieces per bag.

1 : $46.94
5 : $44.39

HDBB-230-1-250

3M HDBB-230-1-250 heat shrinkable cable breakout boot is a 2-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 3.00"/1.50" outlet dimensions for larger cable breakouts.

1 : $108.69
5 : $101.94
10 : $95.8
25 : $90.88
50 : $87.81

12-110-1250-B4M

Eaton Electronics

1250W Inverter, AC Bypass 40A Batt Charger

1 : $825.02
5 : $783.39
10 : $746.96

684-1251-032-02

Trombetta

Sealed 12V DC Contactor Continuous Duty, L-Bracket Silver Contacts

1 : $40.59
5 : $36.25
10 : $33.83
50 : $31.9
100 : $30.45
200 : $29.0

29006.1.25

FTZ Industries

FTZ Industries 29006-1.25 dual-wall adhesive-lined heat shrink tubing is black polyolefin tubing with a 1/4" size in 1-1/4" lengths for sealing and protecting wires, splices, and terminals. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental sealing.

1 : $11.44
5 : $10.21

29005-1.25B

FTZ Industries

FTZ Industries 29005-1.25B dual-wall adhesive-lined heat shrink tubing is black polyolefin tubing with a 3/16" size in 1-1/4" lengths for sealing and protecting wires, splices, and terminals. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental sealing.

1 : $64.0
5 : $58.95

5701250BK0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1-1/4" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $15.91
10 : $13.71
50 : $12.41
100 : $11.37
500 : $10.77

Win Source Electronics

74LVC1G125SE-7

Diodes Incorporated

IC BUFF/DVR TRI-ST 1BIT SOT353
RoHS : Compliant

5,360 : $0.056
4,300 : $0.0582
3,310 : $0.0605
2,305 : $0.0651
1,490 : $0.0673
700 : $0.0719

66,000

NCP1253BSN65T1G

onsemi

IC PWM CTLR OCP AUTO
RoHS : Compliant

1,665 : $0.1802
1,245 : $0.2009
965 : $0.2079
700 : $0.2148
455 : $0.2217
190 : $0.2702

36,250

74HCT125D

Nexperia

Quad buffer/line driver; 3-state
RoHS : Compliant

2,770 : $0.1084
2,070 : $0.1209
1,600 : $0.125
1,165 : $0.1292
750 : $0.1334
310 : $0.1625

32,608

IR2125STR

Infineon Technologies AG

IC GATE DRVR HIGH-SIDE 16SOIC

108 : $3.12
81 : $3.48
63 : $3.6
46 : $3.72
30 : $3.84
12 : $4.6799

27,190

74LVC1G125DCKTG4

Texas Instruments

IC BUFF/DVR TRI-ST N-INV SC70-5
RoHS : Compliant

1,025 : $0.3285
765 : $0.3664
595 : $0.379
430 : $0.3917
280 : $0.4043
115 : $0.4927

22,350

AP2125N-2.8TRG1

Diodes Incorporated

IC REG LDO 2.8V 0.3A
RoHS : Compliant

980 : $0.3063
735 : $0.3416
570 : $0.3534
415 : $0.3652
270 : $0.377
110 : $0.4594

20,000

CCB3T1G125QDCKRQ1

Texas Instruments

IC BUS SWITCH 1 X 1:1 SC70-5 / Bus Switch 1 x 1:1 SC-70-5
RoHS : Compliant

310 : $0.9697
235 : $1.0816
180 : $1.1188
130 : $1.1561
85 : $1.1934
35 : $1.4545

14,730

MT41K1G8SN-125:A

Micron Technology Inc

IC SDRAM 8GBIT 800MHZ 78FBGA
RoHS : Compliant

14 : $28.0284
11 : $31.2624
8 : $32.34
6 : $33.4189
4 : $34.4964
2 : $42.0433

7,100

ADS1254E/2K5

Texas Instruments

IC ADC 24BIT SER 20.8KHZ 20-QSOP
RoHS : Compliant

25 : $12.402
19 : $13.8329
14 : $14.3099
11 : $14.7869
7 : $15.2639
3 : $18.6029

5,185

DS91M125TMA/NOPB

Texas Instruments

IC MULTIPLEXER LVDS 1CH 16SOIC / LVDS Repeater 250Mbps 0.65V 16-Pin SOIC Tube
RoHS : Compliant

93 : $3.651
69 : $4.0722
54 : $4.2125
39 : $4.353
25 : $4.4934
11 : $5.4764

3,100

FH12-50S-0.5SH(55)

Hirose Electric Co Ltd

CONN FFC BOTTOM 50POS 0.5MM R/A / 50 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle
RoHS : Compliant

620 : $0.4869
465 : $0.5431
360 : $0.5618
260 : $0.5805
170 : $0.5993
70 : $0.7304

2,690

FT600-1250-2

Littelfuse Inc

FUSE BRD MNT 1.25A 600VAC 2SMD
RoHS : Compliant

830 : $0.4072
620 : $0.4543
480 : $0.47
350 : $0.4856
225 : $0.5013
95 : $0.6108

2,300

MT41J256M16HA-125:E

Micron Technology Inc

IC SDRAM 4GBIT 800MHZ 96FBGA
RoHS : Compliant

3 : $111.8182
2 : $116.3637
1 : $120.9091

1,263

AD9640ABCPZ-125

Analog Devices Inc

14-Bit, 80/105/125/150 MSPS, 1.8 V Dual Analog-to-Digital Converter
RoHS : Compliant

3 : $119.5225
2 : $133.3135
1 : $137.9105

433

AD9645BCPZ-125

Analog Devices Inc

IC ADC 14BIT PIPELINED 32LFCSP
RoHS : Compliant

2 : $328.4211
1 : $366.3158

300

Wuhan P&S

RCWE251250L0FNEA

Vishay Intertechnologies

Thick Film Surface Mount Chip Resistors
RoHS : Compliant

1 : $0.4079
100 : $0.1465
500 : $0.1059
1,000 : $0.0981

534,000

MFU0603FF01250P500

Vishay Intertechnologies

Thin Film Chip Fuses
RoHS : Compliant

1 : $0.66
100 : $0.22
500 : $0.21
1,000 : $0.2

105,000

NCP1253BSN100T1G

onsemi

PWM Controller, Current Mode, for Offline Power Supplies
RoHS : Compliant

1 : $0.62
100 : $0.4
500 : $0.33
1,000 : $0.3

21,000

FOD3125SD

onsemi

-
RoHS : Compliant

1 : $4.52
100 : $2.88
500 : $2.38
1,000 : $2.19

18,000

NCP1256BSN65T1G

onsemi

65KHz,Low Power Offline PWM Current Mode Controller with Brown-Out Protection
RoHS : Compliant

1 : $0.56
100 : $0.36
500 : $0.3
1,000 : $0.27

9,000

FCMT125N65S3

onsemi

650V, 24A, 125m��,N-Ch Power MOSFET
RoHS : Compliant

1 : $7.77
100 : $4.96
500 : $4.09
1,000 : $3.76

9,000

NCP1252CDR2G

onsemi

PWM Controller,Current Mode,for Forward and Flyback Applications
RoHS : Compliant

1 : $0.87
100 : $0.56
500 : $0.46
1,000 : $0.42

5,000

NL27WZ125USG

onsemi

Dual Buffer with 3-State Outputs
RoHS : Compliant

1 : $0.19
100 : $0.12
500 : $0.1
1,000 : $0.1

3,000

1253-R2 Distributor

Link URL