 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1375-R6BK Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ComSIT USA | 86092645113755ELF | FCI/BERG/AMPHENOL COMMUNICATIONS SOLUTIONS | AVAILABLE EU | 18 | ||
 NexGen Digital | 86092325313755ELF | Amphenol FCi | RoHS : Compliant | 474 | ||
 Avnet Silica | R7F701375EAFP-C#KA2 | Renesas Electronics Corporation | 32bit MCU G3M 8 MHz 2 MB 192 KB 100 Pins LFQFP (Alt: R7F701375EAFP-C#KA2) RoHS : Compliant | 0 | ||
| CA13753_STRADA-SQ-FW | LEDIL | Square Lens For MKR LED (Alt: CA13753_STRADA-SQ-FW) RoHS : Compliant | 0 | |||
| CA13752_STRADA-SQ-FT | LEDIL | LED Square Lens For MX3 MX6 LUXEON M XML LUXEON MZ LED (Alt: CA13752_STRADA-SQ-FT) RoHS : Compliant | 0 | |||
| C13757_STRADA-SQ-FS-NP | LEDIL | Square Lens For LUXEON MKR XTE XML LED (Alt: C13757_STRADA-SQ-FS-NP) RoHS : Compliant | 0 | |||
| CA13758_STRADA-SQ-FS-NP | LEDIL | Square Lens Assembly For LUXEON MZ LUXEON M MKR XML XTE LED (Alt: CA13758_STRADA-SQ-FS-NP) RoHS : Compliant | 0 | |||
| CS13756_STRADA-IP-2X6-DWC | LEDIL | POLICARBONATE LENS ARRAY 12 POS173X714MM D ASSYMETRIC (Alt: CS13756_STRADA-IP-2X6-DWC) RoHS : Compliant | 0 | |||
| CS13756_STRADA-IP-2X6-DWC-PC | LEDIL | Optical Lens Array Clear Polycarbonate Box (Alt: CS13756_STRADA-IP-2X6-DWC-PC) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | CCD279137533D000100 | Taoglas Antenna Solutions | IPEX MHFI (U.FL Compatible) PLUG GOLD (Female Socket) to 1.37 Micro Coax Black 100mm to SMA(F) BulkHead with O-ring |
| 0 | |
 DB Roberts | 137540001 | Tinnerman Fasteners | CLIP .115-.135 PHOS&OLIVE DRAB |
| 36 | |
| 1375 | Heyco | SR 15-1 WHITE | 0 | |||
| FH-137-5ZI | PennEngineering (PEM) | PIN, FLUSH, STEEL NOM DIA = 0.137 | 0 | |||
| 0137516T100B | Essentra Components | 38-16 1 SOCKET SET BLK M111 | 0 | |||
| 13RS137522B | Essentra Components | ROUND SPACER, .795 ID, 1.375 O | 0 | |||
| FHS-137-5 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| 0137516G050B | Essentra Components | 38-16X12 GRUB SCREW BLK M111 | 0 | |||
| 0137516T075B | Essentra Components | 38-16 X 34 SKT SET BLACK M111 | 0 | |||
| RS-2517-1375 | Heyco | RS 0250 OD X171 ID X1375 LG NA | 0 | |||
| FHN-137-5ZI | PennEngineering (PEM) | 0 | ||||
| DM1375-1A | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
| 13RS137520 | Essentra Components | ROUND SPACER, .656 ID, 1.375 O | 0 | |||
| 0137516T050B | Essentra Components | 38-16 X 12 SOC SET BLK M111 | 0 | |||
| 0137524S041 | Essentra Components | SET SCREW, SLOTTED HEAD, 38-24 | 0 | |||
| 0137516T100 | Essentra Components | SET SCREW, SOCKET HEAD, 38-16 | 0 | |||
 Flip Electronics | MRF13750HR5 | NXP Semiconductors | Stock RoHS : Compliant | 32 | ||
 Pasternack Enterprises US | PE3W13755 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 50 Ohm TNC Male to 75 Ohm N Male Cable Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm TNC male to 75 Ohm N male cable using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm TNC male to 75 Ohm N male cable using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W13755 can also be known as a TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W13755 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W13755 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13755 can also be used in the other direction and will be a type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. | 435 | ||
| PE3W13755-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 50 Ohm TNC Male to 75 Ohm N Male Cable 24 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm TNC male to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm TNC male to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W13755-24 can also be known as a TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W13755-24 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W13755-24 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13755-24 can also be used in the other direction and will be a type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 87 | ||
| PE3W13755-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 50 Ohm TNC Male to 75 Ohm N Male Cable 36 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm TNC male to 75 Ohm N male cable 36 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm TNC male to 75 Ohm N male cable 36 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W13755-36 can also be known as a TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W13755-36 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W13755-36 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13755-36 can also be used in the other direction and will be a type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 87 | ||
| PE3W13755-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 50 Ohm TNC Male to 75 Ohm N Male Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm TNC male to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm TNC male to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W13755-12 can also be known as a TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W13755-12 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W13755-12 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W13755-12 can also be used in the other direction and will be a type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 87 | ||
| PE3W13753LF | Pasternack Enterprises | 0 | ||||
| PE3W13758 | Pasternack Enterprises | 0 | ||||
| PE3FCA137-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC APC, NK to ST UPC, SM OS2, 2.0mm PVC, Yellow-5M. Pasternack’s PE3FCA137-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with simplex FC/APC to ST/UPC connectors. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA137-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of FC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W13755LF | Pasternack Enterprises | 0 | ||||
| PE3W13759 | Pasternack Enterprises | 0 | ||||
| PE3W13751 | Pasternack Enterprises | 0 | ||||
| PE3W13757/HS | Pasternack Enterprises | 0 | ||||
| PE3W13752/HS | Pasternack Enterprises | 0 | ||||
| PE3W13756 | Pasternack Enterprises | 0 | ||||
| PE3W11375/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug Right Angle to N Male Cable Using LMR-195-FR Coax with HeatShrink. PE3W11375/HS is a 1.0/2.3 plug right angle to N male cable using LMR-195-FR coax. This Pasternack 1.0/2.3 plug right angle to N male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm N for connector 2. 1.0/2.3 right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug 1.0/2.3 right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11375/HS 1.0/2.3 plug right angle to N male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C11375 | Pasternack Enterprises | 0 | ||||
 Win Source Electronics | 6N137-500E | Broadcom Limited | OPTOISO 3.75KV OPEN COLL 8DIP GW / Optocoupler Logic-Out Open Collector DC-IN 1-CH 8-Pin PDIP SMD T/R RoHS : Compliant |
| 30,000 | |
| HCNW137-500E | Broadcom Limited | Optocoupler Logic-Out Open Collector DC-IN 1-CH 8-Pin PDIP W SMD T/R / OPTOISO 5KV OPEN COLL 8DIP GW RoHS : Compliant |
| 30,000 | ||
| 0251.375NRT1L | Littelfuse Inc | 251/253 Series, PICO® II, Very Fast-Acting Fuse | FUSE BOARD MNT 375MA 125VAC/VDC RoHS : Compliant |
| 20,000 | ||
| 6N137-560E | Broadcom Limited | OPTOISO 3.75KV 1CH OPN COLL 8SMD RoHS : Compliant |
| 12,757 | ||
HCNW137#500 | Broadcom Limited | OPTOISO 5KV OPEN COLLECTOR 8SO RoHS : Not Compliant |
| 7,440 | ||
| 1375820-3 | TE Connectivity | CONN RCPT HSG 3POS 2.54MM / 3 Rectangular Connectors - Housings Receptacle White 0.100" (2.54mm) RoHS : Compliant |
| 5,000 | ||
| 0451.375MRL | Littelfuse Inc | FUSE BOARD MNT 375MA 125VAC/VDC RoHS : Compliant |
| 4,000 | ||
ADSP-21375KSWZ-2B | Analog Devices Inc | IC DSP 32BIT 266MHZ 208-MQFP RoHS : Compliant |
| 1,980 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand