1663P52 Price, Distributor, Stock

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

AEA10R166

PennEngineering (PEM)

#10

AEA10RB166

PennEngineering (PEM)

#10

AES10K166ZYR

PennEngineering (PEM)

D3-316-611-191

Southco

D3-316-611-191

D8-316-611-170

Southco

Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o

D1-166-070-030SE

Southco

These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement

M1660-B-2545-B-5

RAF Electronic Hardware

STANDARD BRASS PARTIAL KNURL SHANK SWAGE MOUNT STANDOFF

M2166-3005-AL

RAF Electronic Hardware

R4-81-661-50-KD10

Southco

R4-81-661-50-KD10

FH-116-6ZI

PennEngineering (PEM)

PIN, FLUSH, STEEL NOM DIA = 0.116

IBC-0616-6

Standard Insert

Blind-end protects the threads from plastic intrusion.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

D8-316-627-191

Southco

D8-316-637-190

Southco

491661

Essentra Components

EBV Elektronik

HSMF-C166

Broadcom Limited

LED MultiColor Chip YellowGreen 586572nm 20mA 4Pin 0603 1608 Metric (Alt: HSMF-C166)
RoHS : Compliant

156,000

BTB16-600SWRG

STMicroelectronics

Triac 600 V 16 A 13 V 160 A 15 mA (Alt: BTB16-600SWRG)
RoHS : Compliant

138,150

BTA16-600BWRG

STMicroelectronics

Triac 600 V 16 A 13 V 50 mA ITO220AB 3 Pins (Alt: BTA16-600BWRG)
RoHS : Compliant

96,350

BTA316-600ET,127

WeEn Semiconductor Co Ltd

(Alt: BTA316-600ET,127)
RoHS : Compliant

27,000

BTA16-600BRG

STMicroelectronics

Triac 600 V 16 A TO220AB 15 V 160 A 50 mA (Alt: BTA16-600BRG)
RoHS : Compliant

16,150

BTA16-600SWRG

STMicroelectronics

Thyristor TRIAC 600V 168A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA16-600SWRG)
RoHS : Compliant

13,900

2STD1665T4

STMicroelectronics

Bipolar BJT Single Transistor NPN 65 V 6 A 15 W TO252 DPAK Surface Mount (Alt: 2STD1665T4)
RoHS : Compliant

7,500

BTB16-600CWRG

STMicroelectronics

Thyristor TRIAC 600V 168A 3Pin3Tab TO220AB Tube (Alt: BTB16-600CWRG)
RoHS : Compliant

1,850

CA11663_HEIDI-RS

LEDIL

Heidi Lens With Transparent Color (Alt: CA11663_HEIDI-RS)
RoHS : Compliant

816

MBRB1660-M3/I

Vishay Intertechnologies

(Alt: MBRB1660-M3/I)
RoHS : Compliant

800

BTA16-600CRG

STMicroelectronics

Thyristor TRIAC 600V 168A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA16-600CRG)
RoHS : Compliant

650

MCF5274LVM166

NXP Semiconductors

Microprocessor 1 Core 32bit ColdFire V2 166 MHz MAPBGA 196 Pins (Alt: MCF5274LVM166)
RoHS : Compliant

504

MC33166TVG

onsemi

Buck Boost Inverting Regulator Switching 30 A TA 40C to 85C (Alt: MC33166TVG)
RoHS : Compliant

150

BTB16-600BRG

STMicroelectronics

Thyristor TRIAC 600V 168A 3Pin3Tab TO220AB Tube (Alt: BTB16-600BRG)
RoHS : Compliant

C16688_ILONA-W

LEDIL

Lens Single Socket Fastening 35Angle Wide Beam 498mm (Alt: C16688_ILONA-W)
RoHS : Compliant

ECCO

97-3057-1016(676)

Amphenol Industrial Operations

5 : $9.56

995

97-3057-1016(676)

Amphenol Industrial Operations

5 : $9.56

995

10-821668-000

Amphenol Industrial Operations

5 : $11.41

964

10-821663-000

Amphenol Industrial Operations

5 : $14.68

568

97-3102A-16(621)(0850)

Amphenol Industrial Operations

50 : $5.22

505

97-3055-28-16(621)

Amphenol Industrial Operations

1 : $20.76

104

97-3055-28-16(621)

Amphenol Industrial Operations

5 : $37.13

104

MS3108R16S-1SF80F166

ITT Interconnect Solutions

CA3108R16S-1SF80F166

ITT Interconnect Solutions

97-3057-16(621)

Amphenol Industrial Operations

5 : $13.31

97-3057-16(621)

Amphenol Industrial Operations

5 : $13.31

97-3057-1016(621)

Amphenol Industrial Operations

5 : $13.35

97-3057-1016(621)

Amphenol Industrial Operations

5 : $13.35

97-3055-16-6

Amphenol Industrial Operations

5 : $28.98

97-3055-16-6

Amphenol Industrial Operations

5 : $28.98

Flip Electronics

NTHS4166NT1G

onsemi

Stock, Ship Today
RoHS : Compliant

108,000

MC56F81668LVLH

NXP Semiconductors

Stock
RoHS : Compliant

14,080

MC56F81666LVLF

NXP Semiconductors

Stock
RoHS : Compliant

11,000

IDTQS5LV931-66Q

Integrated Device Technology Inc

Stock
RoHS : Not Compliant

9,432

NCP81166HMNTBG

onsemi

Stock, Ship Today

6,000

TSI381-66IL

Integrated Device Technology Inc

Stock
RoHS : Not Compliant

5,975

CY7C1354C-166AXCT

Cypress Semiconductor

Stock, Ship Today
RoHS : Compliant

5,794

74LVTH16646MTDX

onsemi

Stock, Ship Today
RoHS : Compliant

4,000

74LCX16646MTD

onsemi

Stock, Ship Today
RoHS : Compliant

1,755

CY7C1327G-166AXC

Infineon Technologies AG

Stock, Ship Today
RoHS : Compliant

866

MBRB1660-E3/81

Vishay Intertechnologies

Stock
RoHS : Compliant

800

CY7C1356CV25-166AXC

Infineon Technologies AG

Stock, Ship Today

224

CY7C1356CV25-166AC

Cypress Semiconductor

Stock

224

MCF5207CVM166

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

194

71T75602S166BGI

Renesas Electronics Corporation

Stock
RoHS : Not Compliant

Maritex

166051-1

TE Connectivity

D-Sub Connectors; 166051-1; TE CONNECTIVITY; Socket; Yes; Straight; 14.4 mm
RoHS : Compliant

100,000 : $0.122
50,000 : $0.132
12,500 : $0.151
3,000 : $0.215
1,000 : $0.251
100 : $0.34
1 : $1.0625

22,958

166291-1

TE Connectivity

D-Sub Connectors; 166291-1; TE CONNECTIVITY; Socket; Yes; Straight; 2 A
RoHS : Compliant

1,000 : $0.311
500 : $0.382
100 : $0.511
10 : $0.775
1 : $0.9333

12,846

166052-1

TE Connectivity

D-Sub Connectors; 166052-1; TE CONNECTIVITY; Socket; Yes; Straight; 14.4 mm
RoHS : Compliant

1,000 : $0.138
500 : $0.151
100 : $0.173
10 : $0.221
1 : $0.29

12,474

3403.0166.24

Schurter Electronic Components

SMD fuse; time-lag T; 1A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C
RoHS : Compliant

6,000 : $0.419
2,000 : $0.44
500 : $0.464
250 : $0.48
200 : $0.488
100 : $0.506
50 : $0.556
10 : $0.791
5 : $0.88
1 : $1.0097

3,990

5-166053-1

TE Connectivity

D-Sub Connectors; 5-166053-1; TE CONNECTIVITY; Male; 14.9 mm; Straight
RoHS : Compliant

500 : $0.282
300 : $0.306
100 : $0.327
30 : $0.432
10 : $0.561
1 : $0.7092

2,500

FBMA-11-451616-600A50T

King Core Electronics Inc

Ferrite bead -FBMA1806-451616; SMD; Z=60Ohm; Rdc=0.02R; Imax=5A

12,000 : $0.038
4,000 : $0.044
1,000 : $0.048
1 : $0.067

1,006

BTA16-600BQ

WeEn Semiconductor Co Ltd

Triac; 600V; 16A; Igt:50/70mA; Ifsm:160A; sensitive gate; 4Q; -40+150 deg.C; THT; TO220AB
RoHS : Compliant

5,000 : $0.419
2,000 : $0.506
1,000 : $0.572
500 : $0.635
100 : $0.786
50 : $0.849
10 : $0.989
1 : $1.1205

891

5-166052-1

TE Connectivity

D-Sub Connectors; 5-166052-1; TE CONNECTIVITY; Female; 14.4 mm; Straight
RoHS : Compliant

1 : $0.5747

565

3403.0166.11

Schurter Electronic Components

SMD fuse; time-lag T; 1A; 250V AC/125V DC; 10.1�3�3mm; -55+125 deg.C
RoHS : Compliant

500 : $0.567
100 : $0.609
50 : $0.63
30 : $0.648
10 : $0.68
5 : $0.704
1 : $0.8331

500

166569-1

TE Connectivity

DIN 41612 Connectors; 166569-1; TE CONNECTIVITY; Free Hanging, Panel; Straight; 5.08 mm; Snap in
RoHS : Compliant

1,000 : $5.816
300 : $6.457
100 : $7.609
30 : $8.141
10 : $10.706
1 : $13.7381

217

C146 10G016 600 1

Amphenol Tuchel

Entry Hood C14610G0166001; single top; low profile; IP65; PG21

100 : $3.62
25 : $3.833
10 : $4.303
1 : $5.536

178

BTA16-600BWRG

STMicroelectronics

Thyristors & SCRs; BTA16-600BWRG; STMICROELECTRONICS; 16 A; No; TO-220AB; 3
RoHS : Compliant

1,000 : $0.675
1 : $0.8647

149

LM5166DRCR

Texas Instruments

DC DC Converters; LM5166DRCR; TEXAS INSTRUMENTS; 10; Buck; 1; 3 mm
RoHS : Compliant

1,000 : $0.886
500 : $0.954
100 : $1.06
10 : $1.192
1 : $1.353

216604-2

TE Connectivity

Female Socket Headers; 216604-2; TE CONNECTIVITY; 2; 2; 3 A; 2
RoHS : Compliant

1 : $1.5581

C16670_VICTORIA-W

LEDIL

Lens for LED mid power; angle: 62 to 76 degrees FWHM; Number of LEDs: 80; Dimensions: round 300mm; Height: 20mm; meterial: PMMA; Fastening: screw

1,000 : $12.082
520 : $12.515
120 : $13.061
10 : $14.977
1 : $21.036

Pasternack Enterprises US

PE38166-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. SHV Plug to Straight Cut Lead Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SHV plug to straight cut lead cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to straight cut lead cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SHV to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SHV cable connection on one end and a straight cut lead cable connection on the other. Our SHV to straight cut lead cable assembly has a plug gender on end 1 and a sexless on end 2. PE38166-12 can also be known as a SHV male to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE38166-12 RF cable has a PVC (NC) jacket of 0.242-inch diameter. The flexible RF cable has a between series connection. SHV male to straight cut lead sexless cable assembly PE38166-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE38166-12 can also be used in the other direction and will be a straight cut lead sexless to SHV plug cable assembly if the opposite connectivity is required. SHV male to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SHV to straight cut lead cable assembly for quick shipment worldwide. Variations of SHV and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SHV to Straight Cut Lead RF cable assembly as per your requirements.

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

787

PE39416-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male Right Angle to SMA Male Right Angle Semi-Flexible Precision Cable 6 Inch Length Using PE-SR405FL Coax, RoHS., Radio frequency assembly SMA male right angle to SMA male right angle semi-flexible precision cable 6 inch length using PE-SR405FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle semi-flexible precision cable 6 inch length using PE-SR405FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our precision right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE39416-6, can also be known as a precision right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE39416-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle semi-flexible precision cable 6 inch length using PE-SR405FL coax, RoHS.

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

758

PE3W16636LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to BNC Female Bulkhead Cable 36 Inch Length Using RG316-DS Coax, LF Solder., Radio frequency assembly SMA male right angle to BNC female bulkhead cable 36 inch length using RG316-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC female bulkhead cable 36 inch length using RG316-DS coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a BNC bulkhead cable connection on the other. Our right angle SMA to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W16636LF-36 can also be known as a right angle SMA plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16636LF-36 RF cable has a FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our right angle SMA male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. SMA plug to BNC jack cable assembly PE3W16636LF-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16636LF-36 can also be used in the other direction and will be a BNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC RF cable assembly as per your requirements.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

209

PE3MP2166-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB Plug to TRB Plug Right Angle 1553 Cable 48 Inch Length Using 78 Ohm M17/176-00002 Coax., Radio frequency assembly TRB plug to TRB plug right angle 1553 cable 48 inch length using 78 Ohm M17/176-00002 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB plug to TRB plug right angle 1553 cable 48 inch length using 78 Ohm M17/176-00002 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and right angle TRB cable connection on the other. Our 1553 TRB to right angle TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MP2166-48 can also be known as a 1553 TRB male to right angle TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MP2166-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to right angle TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2166-48 can also be used in the other direction and will be right angle TRB plug to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB plug to TRB plug right angle 1553 cable 48 inch length using 78 Ohm M17/176-00002 coax.

1 : $487.99
25 : $463.59
50 : $439.19
100 : $419.67

PE3M0416-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 Contact Socket to SMPM Size 12 Contact Socket Cable 6 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0416-6 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP socket contact connection on one end and a mini SMP socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to mini SMP cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0416-6 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. Our mini SMP socket to mini SMP socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0416-6 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. Mini SMP socket to mini SMP socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0416-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to mini SMP RF cable are available on our downloadable PDF datasheet. Mini SMP socket to mini SMP socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to mini SMP RF cable assembly as per your requirements.

1 : $135.99
10 : $130.55
25 : $125.11
100 : $119.67

PE3166LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMB Plug to SMB Plug Cable 36 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly SMB plug to SMB plug cable 36 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug cable 36 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3166LF-36, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3166LF-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug cable 36 inch length using RG223 coax, RoHS.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE34166

Pasternack Enterprises

PE34166LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using PE-SR401FL Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 36 inch length using PE-SR401FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using PE-SR401FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34166LF-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34166LF-36 is built with PE-SR401FL which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using PE-SR401FL coax, RoHS.

1 : $207.99
25 : $197.59
50 : $187.19

PE3W10166

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. N Female to C Female 4 Hole Flange Cable Using RG214 Coax. PE3W10166 is a N female to C female 4 hole flange cable using RG214 coax. This Pasternack N female to C female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm C for connector 2. Our female N to female C 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10166 N female to C female 4 hole flange cable assembly is constructed with RG214 coax.

PE3W16612/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMB Plug Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W16612/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-36 can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-36 can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3W16665

Pasternack Enterprises

PE3W16694/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male to SMB Jack Bulkhead Cable Using RG223 Coax with HeatShrink. PE3W16694/HS is a N male to SMB jack bulkhead cable using RG223 coax. This Pasternack N male to SMB jack bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. Our male N to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16694/HS N male to SMB jack bulkhead cable assembly is constructed with RG223 coax.

PE3C1669LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm.

PE3W11660

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. UHF Male to BNC Female Cable Using RG142 Coax. PE3W11660 is a UHF male to BNC female cable using RG142 coax. This Pasternack UHF male to BNC female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. Our male UHF to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11660 UHF male to BNC female cable assembly is constructed with RG142 coax.

1663P52 Distributor

Link URL