 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
18G-TN3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | 10160855-18GLF | Amphenol Corporation | Connector: wire-board; plug; male; data; 8.5A; PIN: 18; Glow-Wire |
| 4,195 | |
| 10-330952-18G | Amphenol Corporation | 10-330952-18G |
| 43 | ||
| 19-218/GHC-YQ1R2QY/3T | Everlight Electronics Co Ltd | LED; green; SMD; 0603; 72mcd; 120°; 5mA; 518nm; Lens: transparent RoHS : Compliant |
| 0 | ||
| PV5S24018G | E-Switch Inc | Switch: vandal resistant; Pos: 2; SPST-NO; PV5; 2A/36VDC; IP65; gold RoHS : Compliant |
| 0 | ||
| XCSP3918G13 | Telemechanique Sensors | Limit switch |
| 0 | ||
| MKP10H518G-C | Miflex SA | Capacitor: polypropylene; 1.8uF; 600VDC; ±2%; Ø25x51mm; THT; 0.003 |
| 0 | ||
| LQW15AWR18G80D | Murata Manufacturing Co Ltd | Inductor: wire; SMD; 0402; 180nH; 260mA; R: 2.2Ω; ±2%; LQW; 180mm RoHS : Compliant |
| 0 | ||
| PC 3828 18 G | FIBOX | Enclosure: multipurpose; X: 278mm; Y: 378mm; Z: 180mm; SOLID; grey |
| 0 | ||
| SLY11SMD05118G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 18; SMT; 3A; 100V |
| 0 | ||
| STV-BMA/SMA-F/F-18GHZ-50OHM-FL | Ingun Prufmittelbau GmbH | Connector; -65÷125°C; 22.3x19mm; L: 22.3mm; W: 19mm; STV; 50Ω; 18GHz |
| 0 | ||
| 18-218/GHC-YP2R1RX/3T | Everlight Electronics Co Ltd | LED; green; SMD; 0201; 57mcd; 0.65x0.38mm; 120°; 2mA; λd: 518nm; 2.7V |
| 0 | ||
| SB-T-HF-004-18GHZ-02 | Ingun Prufmittelbau GmbH | Interface block; 0÷80°C; side; SB-HF; 50Ω; 18GHz |
| 0 | ||
| MK14X318G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 18; THT; 1.5A |
| 0 | ||
| NBB8-18GM50-E2-3G-3D | PEPPERL+FUCHS GmbH | Sensor: inductive; OUT: PNP / NO; 0÷8mm; 10÷30VDC; M18; 2m; 200mA |
| 0 | ||
| LQW18ANR18G80D | Murata Manufacturing Co Ltd | Inductor: wire; SMD; 0603; 180nH; 310mA; R: 1.65Ω; ±2%; LQW; 180mm RoHS : Compliant |
| 0 | ||
 Avnet Americas | BLM18GG471SN1D | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 36,000 | |
74LVC1G18GW,125 | Nexperia | - Tape and Reel (Alt: 74LVC1G18GW,125) RoHS : Compliant |
| 27,000 | ||
1N5818G | onsemi | - Bulk (Alt: 1N5818G) RoHS : Compliant |
| 15,000 | ||
| LQW18ANR18G8ZD | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQW18ANR18G8ZD) RoHS : Compliant |
| 8,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF - Tape and Reel (Alt: TZMC18-GS08) RoHS : Compliant |
| 7,500 | ||
ZXMP10A18GTA | Diodes Incorporated | - Tape and Reel (Alt: ZXMP10A18GTA) RoHS : Compliant |
| 2,000 | ||
| TSW-108-18-G-S | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 8 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-108-18-G-S) RoHS : Compliant |
| 300 | ||
| SCMR18G604SRBB0 | Kyocera AVX Components | Supercapacitor, EDLC, 0.6 F, 7.5 V, -10%, +30%, 1000 hours @ 65?C, Radial Leaded - Bulk (Alt: SCMR18G604SRBB0) RoHS : Compliant |
| 230 | ||
| TSW-112-18-G-D | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 24 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-112-18-G-D) RoHS : Compliant |
| 152 | ||
| PKU4418GPI | Flex Ltd | Isolated Through Hole DC/DC Converter, Industrial & ITE, 2:1, 45 W, 1 Output, Adj, Fixed, 1.8 V - Bulk (Alt: PKU4418GPI) RoHS : Compliant |
| 58 | ||
| ELB-2018/GV17SDR16UYWB/S | Everlight Electronics Co Ltd | - Bulk (Alt: ELB-2018/GV17SDR16UYWB/S) RoHS : Compliant | 20 | |||
| EK-U1-VCU118-G | AMD | - Boxed Product (Development Kits) (Alt: EK-U1-VCU118-G) RoHS : Compliant |
| 5 | ||
| 10-241866-18G | Amphenol Corporation | - Bulk (Alt: 10-241866-18G) RoHS : Not Compliant |
| 0 | ||
74AUP1G18GS,132 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, XSON - Tape and Reel (Alt: 74AUP1G18GS,132) RoHS : Compliant |
| 0 | ||
| BLMI-304-J-18G-18 | Omega Engineering | MINERAL INSULATED METAL SHEATH THERMOCOUPLE PROBES WITH BARE LEADS - Bulk (Alt: BLMI-304-J-18G-18) RoHS : Compliant |
| 0 | ||
 Newark | LQW15AWR18G80D | Murata Manufacturing Co Ltd | Inductor, 180Nh, 1.3Ghz, 0402; |Murata Manufacturing Co., Ltd. LQW15AWR18G80D RoHS : Compliant |
| 1,447 | |
| LQW15AWR18G80D | Murata Manufacturing Co Ltd | Inductor, 180Nh, 1.3Ghz, 0402; |Murata Manufacturing Co., Ltd. LQW15AWR18G80D RoHS : Compliant |
| 1,447 | ||
| TSW-104-18-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 4Way; |Samtec, Inc. TSW-104-18-G-S RoHS : Compliant |
| 1,426 | ||
| TSW-113-18-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 13Way; |Samtec, Inc. TSW-113-18-G-S RoHS : Compliant |
| 400 | ||
| TSW-105-18-G-S-LL | Samtec Inc | Header, 2.54Mm, Tht Vert, 5Way; |Samtec, Inc. TSW-105-18-G-S-LL RoHS : Compliant |
| 377 | ||
| TSW-126-18-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 26Way; |Samtec, Inc. TSW-126-18-G-S RoHS : Compliant |
| 141 | ||
| LSS18G | nVent Hoffman | Encl Accessory, Straight Section, Grey; |Nvent Hoffman LSS18G RoHS : Not Compliant |
| 79 | ||
| 18G1309 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G1309 RoHS : Compliant |
| 21 | ||
| 1418G6LP | Hammond Manufacturing | Nema 4-12 Encl 16X16X6; |Hammond 1418G6LP RoHS : Not Compliant |
| 19 | ||
| 18G2113 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G2113 RoHS : Compliant |
| 9 | ||
| E57-18GS05-A | Eaton Cutler-Hammer | Inductive Proximity Sensor, E57; |Eaton Cutler Hammer E57-18GS05-A RoHS : Not Compliant |
| 9 | ||
| 18G1709 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G1709 RoHS : Compliant |
| 7 | ||
| PC 3828 18 G ENCLOSURE | FIBOX | Enclosure, Pc, Grey, 380X280X180Mm; |Fibox PC 3828 18 G ENCLOSURE RoHS : Compliant |
| 7 | ||
| PC 3819 18 G-2FSH ENCL. | FIBOX | Enclosure, Multipurpose, Grey, Pc; |Fibox PC 3819 18 G-2FSH ENCL. RoHS : Compliant |
| 7 | ||
| 18G6927 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G6927 RoHS : Compliant |
| 1 | ||
 RS | NBN15-18GM60-US (198082) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR, NON-FLUSH, IP67, NBN15 SERIES |
| 36 | |
| NBB5-18GM50-E2-V1 (84195) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, DC, 025526 |
| 28 | ||
| VS18G517DF312A | Norgren | VALVE, VS18 5/2 SOL/SPRING |
| 15 | ||
| NJ5-18GM-N-V1 (106453) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR, 5MM, NAMUR, M12, IP67, FLUSH, NJ5 SERIES |
| 12 | ||
| SW-3-CS-1.8-G (101542-000) | Smiths Interconnect | BOARD TEST SPRING, PROBE, 0.125 (3.18), CS, SIZE 3, 3A, 4OZ, SW SERIES |
| 11 | ||
| NPFC-D-G18-G14-M (8030270) | Festo | FITTING/NIPPLE, DBL, STRAIGHT, AIR, G1/8 AND G1/4 MALE, NKL PL BRASS |
| 9 | ||
| NBB8-18GM30-E2-V1 (87743) | PEPPERL+FUCHS GmbH | PNP BARRELINDUCTIVE PROXIMITY SENSOR, M18X1,8 MM DETECTION RANGE,10 TO 30VDC, IP67 |
| 6 | ||
| UB500-18GM75-U-V15 (133055) | PEPPERL+FUCHS GmbH | ULTRASONIC PROXIMITY SENSOR,18 MM, CYLINDRICAL, DIFFUSE,0.03-0.5M, ANALOG, M12 5-PIN |
| 5 | ||
| NQXL-18G-24 | Omega Engineering | THERMOCOUPLES, QUICK DISCONNECT T/C'S |
| 4 | ||
| HL18G-P4A3BL (1071037) | SICK AG | PHOTOELECTRIC SENSOR, RETROREFLECTIVE, PNP, LO/DO, M12,RED, BG, TCH |
| 4 | ||
| NJ5-18GM50-E-V1 (282964) | PEPPERL+FUCHS GmbH | INDUCTIVE DC |
| 4 | ||
| NBN12-18GM50-A2-V1 (187656) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR, CYLINDRICAL, NON-FLUSH, NBN12 SERIES |
| 3 | ||
| UB1000-18GM75-I-V15 (204535) | PEPPERL+FUCHS GmbH | ULTRASONIC PROXIMITY SENSOR,18 MM, CYLINDRICAL, DIFFUSE,0.07-1M, ANALOG, M12 5-PIN |
| 2 | ||
| 1418G6LP | Hammond Manufacturing | WALLMOUNT ENCLOSURE, MILD STEEL, NEMA 4,12, 16X16X6 |
| 1 | ||
| NJ8-18GM50-E2 (282965) | PEPPERL+FUCHS GmbH | SENSOR, PROXIMITY, M18 INDUCTIVE, 8MM RANGE, 10-60VDC, PNP-NO, 2M, PVC, 282965 |
| 1 | ||
 Rochester Electronics | 74AUP1G18GM,115 | NXP Semiconductors | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 220,000 | |
| 74LVC1G18GV/S400,125 | NXP Semiconductors | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 1.65V - 5.5V SOT-23-6 T/R RoHS : Compliant |
| 8,131 | ||
| 74AUP1G18GS,132 | Nexperia | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 103,011 | ||
74AUP1G18GM,115 | Nexperia | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 185,000 | ||
NCP5663DS18G | onsemi | IC VOLT REG Fixed 1 REG 1.8V 3A TO-263-6 Tube RoHS : Compliant |
| 313 | ||
2N4918G | onsemi | Trans BJTs Single 40V 1A TO-225-3 Box RoHS : Compliant |
| 50,274 | ||
NCP1117DT18G | onsemi | IC VOLT REG Fixed 1 REG 1.8V 1A TO-252-3 Tube RoHS : Compliant |
| 6,971 | ||
BGS18GA14E6327XTSA1 | Infineon Technologies AG | RF Switch SP8T 100MHz 3.8GHz 14-QFN T/R RoHS : Compliant |
| 949,270 | ||
TLK3118GDV | Texas Instruments | Support Circuit, CMOS, PBGA400 RoHS : Not Compliant |
| 1,943 | ||
| SS9018GBU | Fairchild Semiconductor Corporation | RF BJT Single 15V 50mA TO-226-3 Bag RoHS : Compliant |
| 130,381 | ||
MAX1818EUT18#G16 | Maxim Integrated Products | Fixed/Adjustable Positive LDO Regulator, 1.25V Min, 5V Max, PDSO6 RoHS : Compliant |
| 757 | ||
| MAX9718GEBL+ | Maxim Integrated Products | Audio Amplifier Class AB 1-Channel (Mono) 1.4W RoHS : Compliant |
| 8,711 | ||
| RAA228218GNP#HA0 | Renesas Electronics Corporation | RAA228218 - Digital Single Output, 20-Phase PWM Controller with Adaptive Voltage Scaling Bus (AVSBus) RoHS : Compliant |
| 24,000 | ||
| UPA1818GR-9JG-E1-A | Renesas Electronics Corporation | MOSFET P-Channel 20V 10A 8-SOP T/R RoHS : Compliant |
| 3,000 | ||
| UPA2718GR-E2-AT | Renesas Electronics Corporation | MOSFET P-Channel 30V 13A 8-SOIC T/R RoHS : Compliant |
| 19,780 | ||
 Sager | SD-118-G-28 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
ATS-18G-104-C3-R1 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,SUPER FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-135-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-141-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-154-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
ATS-18G-159-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-160-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-18G-165-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-178-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| ATS-18G-184-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-189-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-190-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-30-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-35-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-18G-48-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | 74AUP1G18GW,125 | Nexperia | IC DEMUX 3-ST LP 6TSSOP RoHS : Compliant | 9,762 | ||
| BD5218G-2CGTR | ROHM Semiconductor | Nano Energy™ 延迟时间自由设置型CMOS电压检测器（复位）IC RoHS : Compliant |
| 6,300 | ||
| BD5218G-2MTR | ROHM Semiconductor | Nano Energy™ 延迟时间自由设置型 CMOS复位IC RoHS : Compliant |
| 3,000 | ||
| ZXMP10A18GTA | Diodes Incorporated | ZXMP10A18 Series 100 V 0.15 Ohm P-Channel Enhancement Mode MOSFET - SOT-223 RoHS : Compliant | 3,000 | |||
| BD18GC0VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 2,750 | ||
| BD18GC0JEFJ-E2 | ROHM Semiconductor | 1A 固定电压输出LDO稳压器 RoHS : Compliant |
| 2,500 | ||
| BD18GA3VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 2,500 | ||
| BD18GA3WNUX-TR | ROHM Semiconductor | 300mA 固定电压输出LDO稳压器 RoHS : Compliant |
| 400 | ||
| BD18GA5MEFJ-LBH2 | ROHM Semiconductor | RoHS : Compliant |
| 250 | ||
| BD18GA5VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 250 | ||
| BD18GA5MEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD5318G-2CGTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU4318G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| BU4818G-TR | ROHM Semiconductor | RoHS : Compliant |
| 40 | ||
| BD18GC0MEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
 ComSIT USA | BZT55C18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.41%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 20,000 | ||
| TZMB18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 17,790 | |||
| ZMY18GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 18V V(Z), 6.41%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 15,000 | |||
| CCONSMAFSTEL18G | Adolf Wuerth Gmbh & Co Kg | Electronic Component RoHS : Compliant | 7,500 | |||
| ZY18GP1AMP | Fagor Electrónica | Electronic Component RoHS : Compliant | 3,865 | |||
| 49SMLB10000018GGCET | Pericom Semiconductor Corporation | HC-49, LOW PROFILE, SMD MINIATURE QUARTZ CRYSTAL Series - Fundamental Quartz Crystal, 10MHz Nom RoHS : Compliant | 3,000 | |||
| NCP1117DT18G | onsemi | 1.0 AMP LOW-DROPOUT POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.2V Dropout, BIPolar, PSSO2 RoHS : Compliant | 1,650 | |||
| UPD78C18GQA36A9401 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 1,250 | |||
| UPD78C18GQA40836 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 535 | |||
| 2N4918G | onsemi | MEDIUM-POWER PLASTIC PNP SILICON TRANSISTOR Power Bipolar Transistor, 3A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, TO-225AA, Plastic/Epoxy, 3 Pin RoHS : Compliant | 500 | |||
| 49S03579518GHCE | Saronix | Electronic Component RoHS : Compliant | 400 | |||
| UPD78C18GQA40736 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 387 | |||
| UPD17P218GT | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 72 | |||
| TDA4918G | Siemens | 0.5 A SWITCHING CONTROLLER Switching Controller, Current-mode, 0.5A, 150kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 32 | |||
| LC71N18GC3D | Nortel Networks | Electronic Component RoHS : Not Compliant | 27 | |||
 Interstate Connecting Components | SMS18GE43K9 | SOURIAU-SUNBANK | 0 | |||
| CN0966B18G11S8-040 | Cinch Connectivity Solutions | 26500 PLUG 10#16 1#2 SKT | 0 | |||
| CN0966B18G14P6-040 | Cinch Connectivity Solutions | 26500 PLUG 14#16 PIN | 0 | |||
| CN0966B18G14S7-000 | Cinch Connectivity Solutions | 26500 PLUG 14#16 SKT | 0 | |||
| CN0966B18G31S8-000 | Cinch Connectivity Solutions | 26500 PLUG 31#20 SKT | 0 | |||
| CN0967C18G08P7-000 | Cinch Connectivity Solutions | 26500 WALL MT 8#12 PIN | 0 | |||
| CN0967C18G11SN-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 SKT | 0 | |||
| CN0967C18G31P10Y040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
| CN0967C18G31SNY040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 SKT | 0 | |||
| CN1020A18G08PN-040 | Cinch Connectivity Solutions | 26500 PLUG 8#12 PIN | 0 | |||
| CN1020A18G14S8-040 | Cinch Connectivity Solutions | 26500 PLUG 14#16 SKT | 0 | |||
| CN1021A18G11P7-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 PIN | 0 | |||
| CN1021A18G31P7Y040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
| ITS4102R24-22PB1F18G2 | Glenair Inc | 0 | ||||
| 004138018G0 | ITT Interconnect Solutions | 45481-16ST240 | 0 | |||
 PEI Genesis | CN1021A18G14PN-200 | Cinch Connectivity Solutions |
| 146 | ||
| CN1021A18G11P7-000 | Cinch Connectivity Solutions |
| 44 | |||
| CN0966B18G31S8-000 | Cinch Connectivity Solutions |
| 32 | |||
| CN0967C18G31SNY040 | Cinch Connectivity Solutions |
| 23 | |||
| CN1020A18G14S8-040 | Cinch Connectivity Solutions |
| 20 | |||
| 10-475935-18G | Amphenol Corporation |
| 0 | |||
| C10-330952-18G | Amphenol Corporation |
| 0 | |||
| CN0966B18G11S8-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G14P6-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G14S7-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G08P7-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G11SN-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G31P10Y040 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A18G08PN-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G08P9-200 | Cinch Connectivity Solutions |
| 0 | |||
 PUI | 1N5818-G | 10,000 | ||||
| ACZRT55C18-G | 6,000 | |||||
| 2012-1X18G00S/083/045R/I2 | 4,258 | |||||
| 2011-2X18G00RB | 2,000 | |||||
| 2141-2X18G00SA | 1,282 | |||||
| 2044-2X18G00SA | 1,106 | |||||
| 2011-2X18G01RB | 921 | |||||
| 2143-A2X18G00DNU-S | 842 | |||||
| 2011-2X18G01SB | 684 | |||||
| 2115-2X18G00DN-4B | 600 | |||||
| 2011-1X18G00SB | 333 | |||||
| 2012-1X18G00S/8.3/4.5/RB | 300 | |||||
| 2011-1X18G00LB | 200 | |||||
| 2538-B18G00DBT | 200 | |||||
 Chip 1 Exchange | LQW18ANR18G00D | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 110,507 | ||
| 49SMLB11.0592-18GGC | Pericom Semiconductor Corporation | INSTOCK | 23,500 | |||
| 49SMLB11.0592-18GGC | PERE | INSTOCK | 18,500 | |||
| MC34118G-S28-R | INSTOCK | 9,743 | ||||
| BZT55C18-GS08 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 2,123 | |||
| ZMY18-GS08 | INSTOCK | 1,930 | ||||
| 49SMLB20.0000-18GGC-E | INSTOCK | 950 | ||||
| AP1117D-18-GZ-13-89 | INSTOCK | 259 | ||||
| PS1R85-118GB-L | INSTOCK | 100 | ||||
| ZL50418GKG2 | INSTOCK | 66 | ||||
| SMS18GE6 | SOU | INSTOCK | 62 | |||
| TDA4918G | Siemens | INSTOCK | 60 | |||
| MSTBV-2,5/18-G-5,08 | INSTOCK | 40 | ||||
| SI5318-G-BC | INSTOCK | 20 | ||||
| MST6U18GL-LF | INSTOCK | 10 | ||||
 Avnet Abacus | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 470 ohm 200 mA EMIFIL BLM18GG Series 1 ohm 25 (Alt: BLM18GG471SN1D) RoHS : Compliant | 84,000 | ||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 12,000 | |||
| DX1118/GN | Bulgin | (Alt: DX1118/GN) RoHS : Compliant | 0 | |||
| TS-118-G-AA | Samtec Inc | Pin Header Precision Machined Terminal BoardtoBoard 254 mm 1 Rows 18 Contacts Through Hole (Alt: TS-118-G-AA) RoHS : Compliant | 0 | |||
| BBS-118-G-B | Samtec Inc | (Alt: BBS-118-G-B) RoHS : Compliant | 0 | |||
| SL-118-G-19 | Samtec Inc | PCB Receptacle Low Profile Hybrid BoardtoBoard 254 mm 1 Rows 18 Contacts (Alt: SL-118-G-19) RoHS : Compliant | 0 | |||
| LQW15AWR18G80D | Murata Manufacturing Co Ltd | (Alt: LQW15AWR18G80D) RoHS : Compliant | 0 | |||
| LQW18ANR18G80D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G80D) RoHS : Compliant | 0 | |||
| LQW18ASR18G0CD | Murata Manufacturing Co Ltd | (Alt: LQW18ASR18G0CD) RoHS : Compliant | 0 | |||
| TSW-106-18-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 12 Contacts Through Hole TSW Series (Alt: TSW-106-18-G-D) RoHS : Compliant | 0 | |||
| HTSW-105-18-G-D | Samtec Inc | Pin Header Vertical BoardtoBoard 254 mm 2 Rows 10 Contacts Through Hole HTSW Series (Alt: HTSW-105-18-G-D) RoHS : Compliant | 0 | |||
| AISC-0603-R18G-T | Abracon Corporation | Wirewound Inductor 180 nH 138 Ohm 2 13 MHz 180 mA 0603 1608 Metric - Tape and Reel (Alt: AISC-0603-R18G-T) RoHS : Compliant | 0 | |||
| M55342K06B18G0RWB | Vishay Intertechnologies | SMD Chip Resistor 18 ohm 2 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B18G0RWB) RoHS : Not Compliant | 0 | |||
| AISC-0603-R018G-T | Abracon Corporation | Wirewound Inductor 18 nH 150 Milliohm 2 55 GHz 550 mA 0603 1608 Metric - Tape and Reel (Alt: AISC-0603-R018G-T) RoHS : Compliant | 0 | |||
| BWCS00292821R18G00 | Pulse Electronics Corporation | Inductor Chip Unshielded Wirewound 180nH 2 25MHZ 45QFactor Ceramic 620mA 1008 TR - Tape and Reel (Alt: BWCS00292821R18G00) RoHS : Compliant | 0 | |||
Avnet Asia | 74AUP1G18GS,132 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, XSON (Alt: 74AUP1G18GS,132) RoHS : Compliant | 0 | ||
| TSW-108-18-G-D | Samtec Inc | (Alt: TSW-108-18-G-D) RoHS : Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | (Alt: EK-U1-VCU118-G) RoHS : Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | (Alt: EK-U1-VCU118-G) RoHS : Compliant | 0 | |||
| KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA | ams OSRAM Group | OOSKW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA (Alt: KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA) RoHS : Compliant | 0 | |||
| SF18G | Taiwan Semiconductor | Diode Super Fast Recovery Rectifier 600V 1A 2-Pin DO-204AL T/R (Alt: SF18G) RoHS : Compliant | 0 | |||
| LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 0 | |||
| SCMR18G604SRBB0 | Kyocera AVX Components | Supercapacitor, EDLC, 0.6 F, 7.5 V, -10%, +30%, 1000 hours @ 65?C, Radial Leaded (Alt: SCMR18G604SRBB0) RoHS : Compliant | 0 | |||
| 74AUP1G18GW,125 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 0 | |||
| 8020.5018.G | Schurter Electronic Components | Fuse, Cartridge, Time Delay, 5 A, 500 VAC, 400 VDC, 6.3mm x 32mm, 0.25" x 1.26"", SHT 6.3x32" (Alt: 8020.5018.G) RoHS : Compliant | 0 | |||
| KS DELPS1.22-UHVH-7-H3L4-20-R18-GA | ams OSRAM Group | OOSKS DELPS1.22-UHVH-7-H3L4-20-R18-GA Q6 (Alt: KS DELPS1.22-UHVH-7-H3L4-20-R18-GA) RoHS : Compliant | 0 | |||
| TSW-108-18-G-S | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 8 Contacts, Through Hole, TSW Series (Alt: TSW-108-18-G-S) RoHS : Compliant | 0 | |||
| 74LVC1G18GW,125 | Nexperia | (Alt: 74LVC1G18GW,125) RoHS : Compliant | 0 | |||
 Avnet Silica | 74LVC1G18GW,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC886 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 21,000 | ||
74LVC1G18GV,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC745 (Alt: 74LVC1G18GV,125) RoHS : Compliant | 12,000 | |||
| 74AUP1G18GW,125 | Nexperia | 1to2 Line Demultiplexer 74AUP 1 Channel 12 800 mV to 36 V 6 Pins TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 12,000 | |||
| 1N5818G | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818G) RoHS : Compliant | 7,000 | |||
| BU4818G-TR | ROHM Semiconductor | Volt Supervisor Detect 09V to 48V 5Pin SSOP TR (Alt: BU4818G-TR) RoHS : Compliant | 0 | |||
| N0118GA,412 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 9A 3Pin TO92 Bulk (Alt: N0118GA,412) RoHS : Compliant | 0 | |||
GS864418GE-150 | GSI Technology | SRAM Chip Sync Dual 25V33V 72MBit 4M x 18 75ns38ns 165Pin FBGA Tray (Alt: GS864418GE-150) RoHS : Compliant | 0 | |||
| MP2018GZD-33-Z | Monolithic Power Systems | (Alt: MP2018GZD-33-Z) RoHS : Compliant | 0 | |||
| 74AUP1G18GS,132 | Nexperia | 1to2 Line Demultiplexer 74AUP 1 Channel 12 800 mV to 36 V 6 Pins XSON (Alt: 74AUP1G18GS,132) RoHS : Compliant | 0 | |||
| GS864418GE-150I | GSI Technology | SRAM Chip Sync Dual 25V33V 72MBit 4M x 18 75ns38ns 165Pin FBGA Tray (Alt: GS864418GE-150I) RoHS : Compliant | 0 | |||
| GS81302T18GE-300 | GSI Technology | SRAM Chip Sync Dual 18V 144MBit 8M x 18 045ns 165Pin FBGA Tray (Alt: GS81302T18GE-300) RoHS : Compliant | 0 | |||
| MPQ4418GJ-AEC1-Z | Monolithic Power Systems | DCDC Switching Synchronous Buck Regulator Adjustable 4V to 36V in 08V324V out 06A out (Alt: MPQ4418GJ-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ2918GL-AEC1-Z | Monolithic Power Systems | (Alt: MPQ2918GL-AEC1-Z) RoHS : Compliant | 0 | |||
| GS82564Z18GB-200 | GSI Technology | (Alt: GS82564Z18GB-200) RoHS : Compliant | 0 | |||
| AS9F18G08SA-45BIN | Alliance Memory Inc | AMSLC PARALLEL NAND FLASHAS9F (Alt: AS9F18G08SA-45BIN) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-0603-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| 1003-CM18-GLB | Digi International Inc | 1003-CM18 Plug-in Cell Modem; CAT 18 |
| 0 | ||
| AISC-1008-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| SI5395B-A10118-GM | Skyworks Solutions Inc | Single PLL jitter attenuator with xtal: 12-outputs up to 350 MHz; integer+fractional RoHS : Compliant |
| 0 | ||
| AISC-Q0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | AP1117E18G-13 | Diodes Incorporated | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,375 | |
| 39D118G030GP6 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 212 | ||
| GM1203PFV1-8GN | SUNON USA | IN STOCK SHIP TODAY |
| 90 | ||
| 39D218G010FP6 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | ||
| TSW-104-18-G-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| EPB5218G | PCA Electronics Inc | IN STOCK SHIP TODAY | 48 | |||
| NT2K18GH-03 | Nortel Networks | IN STOCK SHIP TODAY |
| 20 | ||
| NT2K18GG93 | Nortel Networks | IN STOCK SHIP TODAY | 7 | |||
| NT2K18GH-35 | Nortel Networks | IN STOCK SHIP TODAY | 6 | |||
| 617-H018GAJ103 | Amphenol Corporation | IN STOCK SHIP TODAY | 6 | |||
RT9018B-18GSP | Richtek Technology Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| GM1235PFV1-8.GN | SUNON USA | IN STOCK SHIP TODAY |
| 4 | ||
| NJ5-18GM50-E2 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
| NT2K18GH-93 | Nortel Networks | IN STOCK SHIP TODAY | 1 | |||
| NBB8-18GM50-E0 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | HHC1/4-20X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 5,502 | |
| HHC1/2-20X1-1/8-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 914 | ||
| HXN5/16-18-GR8-STL | HEX NUT | Hex Nut STEEL |
| 95 | ||
| HHC5/16-18X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 74 | ||
| FLW1-1/8-GR8-ZY | FLAT WASHER | Flat Washer GRADE 8 STEEL ZINC YELLOW |
| 73 | ||
| HXN1-8-GR8-ZY | HEX NUT | Hex Nut GRADE 8 STEEL ZINC YELLOW |
| 20 | ||
| 0131218G100 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| M4818GAE | Heyco | SCG 875 BLACK 2-5.2MM | 0 | |||
| M4518GAE | Heyco | LTCG 1/2 BLK 2-5.2MM N/N | 0 | |||
| M4818GAB | Heyco | SCG 875 BLACK 2-4.2MM | 0 | |||
| DCB118-GB-SEF | Avdel | XR FLEXVOLT CHARGER - GB | 0 | |||
| CHC-S18GC | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| CHC-18/GA | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| CHC-18/GB | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| M6018GBZ-SM | Heyco | SSMCG 1-1/2 NPT 11-7.7MMW/9807 | 0 | |||
 EBV Elektronik | TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC18-GS08) RoHS : Compliant | 1,062,500 | ||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 177,500 | |||
| DZ23C18-G3-08 | Vishay Intertechnologies | (Alt: DZ23C18-G3-08) RoHS : Compliant | 12,000 | |||
| BXCP-18G-11L-K13-3-A1-00-0-3 | Bridgelux Inc | CSP 1313 KSeries (Alt: BXCP-18G-11L-K13-3-A1-00-0-3) RoHS : Compliant | 12,000 | |||
| BZT55B18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B18-GS08) RoHS : Compliant | 10,000 | |||
| ZMY18-GS08 | Vishay Intertechnologies | (Alt: ZMY18-GS08) RoHS : Compliant | 9,000 | |||
| 99-218GLM2C/L7277SGY-T/EU | Everlight Electronics Co Ltd | LED Chip Pure White 30mA 2Pin SMD TR (Alt: S10C012467) RoHS : Compliant | 6,000 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| BZT55C18-GS08 | Vishay Intertechnologies | (Alt: BZT55C18-GS08) RoHS : Compliant | 2,500 | |||
| BZT52C18-G RHG | Taiwan Semiconductor | Diode Zener Single 18V 5 035W 2Pin SOD123 Plastic TR (Alt: BZT52C18-G RHG) RoHS : Compliant | 0 | |||
| IAUTN12S5N018GATMA1 | Infineon Technologies AG | Power MOSFET N Channel 120 V 310 A 18 Milliohms HSOG 8 Pins Surface Mount (Alt: SP005629905) RoHS : Compliant | 0 | |||
| 19-218/GHC-YQ1R2QY/3T | Everlight Electronics Co Ltd | LED SMD Top View UniColor Brilliant Green 518nm 0603 Pkg 7TR 3k (Alt: S10B001625) RoHS : Compliant | 0 | |||
| 18-218/GHC-YP2R1RX/3T | Everlight Electronics Co Ltd | LED Single Chip Green 535nm 25mA 2Pin SMD TR (Alt: S10B013839) RoHS : Compliant | 0 | |||
| BXEN-18G-11M-3C-00-0-3 | Bridgelux Inc | LED SMD 2835 mid power (Alt: BXEN-18G-11M-3C-00-0-3) RoHS : Compliant | 0 | |||
| BXEN-18G-11M-3C-00-0-5 | Bridgelux Inc | LED SMD 2835 mid power (Alt: BXEN-18G-11M-3C-00-0-5) RoHS : Compliant | 0 | |||
 Flip Electronics | SS9018GBU | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,570 | |
| NCP1117DT18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,950 | ||
| 2N4918G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| SI5344A-D10218-GM | Skyworks Solutions Inc | Stock, Ship Today RoHS : Compliant |
| 865 | ||
| SI5344D-D10218-GM | Skyworks Solutions Inc | Stock | 865 | |||
| R9A07G044L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 664 | |||
| R9A07G054L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 493 | |||
| NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
 Master Electronics | SD-118-G-7-N | Samtec Inc | RoHS : Compliant |
| 0 | |
| BCH-508VS-18-GN | Phoenix Contact | Header Nominal current: 12 A Rated voltage (III/2): 320 V Number of positions: 18 Pitch: 5.08 mm Color: pastel green Contact surface: Tin Mounting: Wave soldering RoHS : Compliant |
| 0 | ||
| BCP-381-8-GY | Phoenix Contact | Conn PC Terminal Block F 8 POS 3.81mm Screw RA Cable Mount 8A RoHS : Compliant |
| 0 | ||
| APA-318-G-B | Samtec Inc | .100 Screw Machine Dip Adaptor Open Body RoHS : Compliant |
| 0 | ||
| APH-0418-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| NPL2X18-G | Thomas & Betts | PVC CTD COND NIPPLE 2X18IN RoHS : Compliant |
| 0 | ||
| HLT-1718-G-T | Samtec Inc | .100 Screw Machine Terminal Array RoHS : Compliant |
| 0 | ||
| HTSW-138-18-G-D-LL-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-142-18-G-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-144-18-G-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-202-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-210-18-G-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-220-18-G-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-115-18-G-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| APA-318-G-A | Samtec Inc | .100 Screw Machine Dip Adaptor Open Body RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8818/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax. | 471 | ||
| PE3C8818/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax. | 257 | |||
| PE3C8818/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-12 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-36 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C8818/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-72 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax. |
| 26 | ||
| PE3C8818/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-120 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax. |
| 15 | ||
| PE3C8818/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-300 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax. |
| 6 | ||
 Venkel Ltd. | WRFI0603-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | ||
| WRFI0805-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0805;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R18GT | VENKEL LTD | Wirewound RF Inductor;1008;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-R18GT-13 | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | |||
 Vyrian | AP1086K18G-13 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.8V, 1.4V Dropout, PSSO2 | 15,316 | ||
| AP1117K18G-13 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.8V, 1.4V Dropout, BIPolar, PSSO2 | 12,489 | |||
| MAX8510EXK18-G05 | Analog Devices (Maxim Integrated) | 10,449 | ||||
| MAX9718GEBL-TG47 | Analog Devices (Maxim Integrated) | 9,032 | ||||
MT58LC128K18G1LG-4.5 | Micron Technology Inc | Standard SRAM, 128KX18, 4.5ns, CMOS, PQFP100 RoHS : Not Compliant | 6,538 | |||
SMP-18GBC | Analog Devices Inc | Sample and Hold Circuit, 8 Func, Sample, CMOS RoHS : Compliant | 5,910 | |||
| MT58LC256K18G1LG-8.5TR | Micron Technology Inc | Standard SRAM, 256KX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant | 5,726 | |||
| MAX1818EUT18#G16 | Maxim Integrated Products | Fixed/Adjustable Positive LDO Regulator, 1.25V Min, 5V Max, PDSO6 RoHS : Compliant | 5,708 | |||
| MAX8510EXK18-G50 | Analog Devices (Maxim Integrated) | 5,553 | ||||
| MT58LC64K18G1LG-7.5TR | Micron Technology Inc | Standard SRAM, 64KX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant | 5,285 | |||
| MAX1734EUK18-GA8 | Analog Devices (Maxim Integrated) | 4,953 | ||||
| MT58LC256K18G1LG-6.6TR | Micron Technology Inc | Standard SRAM, 256KX18, 3.8ns, CMOS, PQFP100 RoHS : Not Compliant | 4,077 | |||
| MT58LC128K18G1LG-6.6TR | Micron Technology Inc | Standard SRAM, 128KX18, CMOS, PQFP100 RoHS : Not Compliant | 2,974 | |||
| MT18GTF25672FDY-667 | Micron Technology, Inc | 2,908 | ||||
| GM0503PFV1-8.GN | SUNON USA | DC Fan, Axial Construction, 0.14A, 5V, 0.7W RoHS : Compliant | 747 | |||
 Waytek, Inc. | TFFN 18GA YELLOW | Unified Wire and Cable Inc | 18GA Yellow TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 14,000 | |
| TFFN 18GA BLACK | Unified Wire and Cable Inc | 18GA Black TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 4,000 | ||
| TFFN 18GA BLUE | Unified Wire and Cable Inc | 18GA Blue TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 3,500 | ||
| TFFN 18GA BROWN | Unified Wire and Cable Inc | 18GA Brown TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand