220MF61PUN-R2 Price, Distributor, Stock

Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo

STKA-032-20

Standard Insert

Uniform knurl diameter reduces the risk of sink marks.Available in varying lengths for injection molding assemblies.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

STP189220A

Essentra Components

TAPERED PLUGSILICON NATURAL

22001095

Essentra Components

ACCESSORIES

2200GL-8001

Sugatsune Kogyo Co Ltd

GLASS DOOR LOCK

262200001

Essentra Components

LATCH, QTR TURN - PADLOCKABLE

12205

Pop Rivets

DPM400-230

1220724

Essentra Components

3801032200SD

Essentra Components

THREADED STUD, 10-32 THREAD, 2

492203

Essentra Components

504112201530

Essentra Components

LINEAR HANDLE LATCH V1 D15 C30

1220725

Essentra Components

1220770

Essentra Components

13SP220B

Essentra Components

ROUND SPACER, .194 ID, .500 OD

EBV Elektronik

IRFR220NTRPBF

Infineon Technologies AG

Power MOSFET N Channel 200 V 5 A 06 ohm TO252AA Surface Mount (Alt: SP001577980)
RoHS : Compliant

44,000

NCX2200GMAZ

NXP Semiconductors

Low Voltage Comparator RailtoRail IO 13V to 55V 6Pin XSON TR (Alt: NCX2200GMAZ)
RoHS : Compliant

15,000

LDK220C50R

STMicroelectronics

LDO Regulator Pos 5V 5Pin SOT323 TR (Alt: LDK220C50R)
RoHS : Compliant

12,000

BZT03C220-TR

Vishay Intertechnologies

ZENER DIODE SOD57 (Alt: BZT03C220-TR)
RoHS : Compliant

10,000

BYM12-200-E3/96

Vishay Intertechnologies

1A200V50NSUF SURPERECTMELF (Alt: BYM12-200-E3/96)
RoHS : Compliant

6,000

RGP02-20E-E3/54

Vishay Intertechnologies

(Alt: RGP02-20E-E3/54)
RoHS : Compliant

5,500

SFH2200A01

ams OSRAM Group

Photodiode Chip 940nm 07AW 2Pin SMD TR (Alt: Q65112A0249)
RoHS : Compliant

3,000

PIC10F220T-I/OT

Microchip Technology Inc

8 Bit MCU Flash PIC10 Family PIC10F22x Series Microcontrollers PIC10 8 MHz 384 Byte 6 Pins (Alt: PIC10F220T-I/OT)
RoHS : Compliant

3,000

SM6T220CA

STMicroelectronics

Diode TVS Single BiDir 188V 600W 2Pin SMB TR (Alt: SM6T220CA)
RoHS : Compliant

2,500

IRFU220PBF

Vishay Intertechnologies

MOSFET NCHANNEL 200V (Alt: IRFU220PBF)
RoHS : Compliant

2,400

IMZ120R220M1HXKSA1

Infineon Technologies AG

(Alt: SP001946190)
RoHS : Compliant

480

HCPL-2200-300E

Broadcom Limited

Optocoupler LogicOut Three State DCIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-2200-300E)
RoHS : Compliant

300

MPX2200GP

STMicroelectronics

(Alt: MPX2200GP)
RoHS : Compliant

200

PTI 70/220-240 S

Inventronics (Hangzhou) Inc

POWERTRONIC INTELLIGENT PTi S EVG fr HIDLampen zum Leuchteneinbau (Alt: 4008321049629)
RoHS : Compliant

120

PTI 150/220-240 I

Inventronics (Hangzhou) Inc

Electronic Control Gear 198V to 254V 250VOUT 160W Screw Mount Box (Alt: 4008321915535)
RoHS : Compliant

ECCO

075-0322-012

ITT Interconnect Solutions

5 : $4.3

1,015

97-3102A-22(0850)

Amphenol Industrial Operations

50 : $5.57

903

97-3102A-22(0850)

Amphenol Industrial Operations

50 : $5.57

903

143-3622-000-MS

ITT Interconnect Solutions

1 : $106.22

558

075-0322-032

ITT Interconnect Solutions

5 : $3.75

231

075-0322-020

ITT Interconnect Solutions

10 : $2.3

176

075-0322-018

ITT Interconnect Solutions

10 : $1.93

126

97-3108B-22(0850)

Amphenol Industrial Operations

1 : $28.4

97-3108B-22(0850)

Amphenol Industrial Operations

1 : $28.4

97-22-20S

Amphenol Industrial Operations

5 : $14.48

2373022000

ITT Interconnect Solutions

5 : $6.68

237-3022-000

ITT Interconnect Solutions

5 : $6.68

MS3108B22-20S

Amphenol Industrial Operations

0750322022

ITT Interconnect Solutions

10 : $2.9

10-820072-20S

Amphenol Industrial Operations

1 : $28.17

FDH Electronics

EE22759/32-20-95

TE Connectivity

Wire and Cable

34,711

78013-0022-0028

Silver State Wire & Cable

Wire and Cable

1,000

78013-0122-0012

Silver State Wire & Cable

Wire and Cable

1,000

BC220PT025220A

BTC Electronic Components

PC Tail Contact

550

342-2022-011

Corsair Electrical Connectors Inc

Connector 5015

1662-202-2031

TE Connectivity

Elec. Contact

2562-202-2090

TE Connectivity

Connector Acc
RoHS : Not Compliant

311AA001M2208

Glenair Inc

Connector
RoHS : Compliant

311AB001B2204

Glenair Inc

Connector
RoHS : Not Compliant

311AJ001B2203E

Glenair Inc

Connector
RoHS : Not Compliant

311AS001M2205ET

Glenair Inc

Connector
RoHS : Compliant

311AS001M2209E

Glenair Inc

Connector
RoHS : Compliant

311AS001NF2207

Glenair Inc

Connector
RoHS : Not Compliant

319AS001B2208-6

Glenair Inc

Connector
RoHS : Not Compliant

319HS001M1502-20

Glenair Inc

Connector
RoHS : Compliant

Pasternack Enterprises US

PE3W08482-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. Fire Rated 4.1/9.5 Mini DIN Female Bulkhead to 4.3-10 Female 4 Hole Flange Low Pim Cable 200 Cm Length Using SPF-250 Coax., Radio frequency assembly fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN bulkhead cable connection on one end and 4.3-10 4 hole flange cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. PE3W08482-200CM can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly PE3W08482-200CM is built with SPF-250 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08482-200CM can also be used in the other direction and will be 4.3-10 female 4 hole flange to 4.1/9.5 mini DIN female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack bulkhead to 4.3-10 jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE2203-30

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 2.6 GHz, Maximum Frequency: 5.2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 30 dB. Directional 30 dB SMA Coupler From 2.6 GHz to 5.2 GHz Rated To 50 Watts. RF coupler part number PE2203-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2.6 GHz and a maximum frequency of 5.2 GHz. Directional coupler part # PE2203-30 is constructed with a coupling value of 30 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.25. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2203-30 directional 30 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $910.0
10 : $873.6
25 : $837.2

PE2202-20

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 2 GHz to 4 GHz Rated To 50 Watts. RF coupler part number PE2202-20 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. Directional coupler part # PE2202-20 is constructed with a coupling value of 20 dB and a coupler directivity of 22 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.15. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2202-20 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $439.99
10 : $422.39
25 : $404.79

PE3M0132-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Temperature Conditioned SMA Male to N Male Low Loss Cable 200 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male to N male low loss cable 200 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0132-200CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and type N connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly. PE3M0132-200CM can also be known as a temperature conditioned low loss SMA plug to N type plug cable assembly and will be shipped the same day after it is purchased. SMA plug to type N plug cable assembly PE3M0132-200CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to N type male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0132-200CM can be used in the other direction and will be type N male to SMA male cable assembly. Pasternack high reliability low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for same-day shipment worldwide. Variations of PE44826 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to N male low loss cable 200 cm length using PE-P142LL coax.

1 : $570.0
25 : $541.5
50 : $513.0
100 : $490.2

PE3W22032LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Male to 1.0/2.3 Jack Bulkhead Cable Using PE-P086HF Coax, LF Solder. PE3W22032LF is a 2.4mm male to 1.0/2.3 jack bulkhead cable using PE-P086HF coax. This Pasternack 2.4mm male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male 2.4mm to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22032LF 2.4mm male to 1.0/2.3 jack bulkhead cable assembly is constructed with PE-P086HF coax.

PE3W22063

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. SMA Female to N Female Cable Using 1/4 inch Superflexible Coax. PE3W22063 is a SMA female to N female cable using 1/4" Superflexible coax. This Pasternack SMA female to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA to female N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22063 SMA female to N female cable assembly is constructed with 1/4" Superflexible coax.

PE3C2204

Pasternack Enterprises

PE3C2220/HS2

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm.

PE3C8232-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.1/9.5 Mini DIN Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN 4 hole flange cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8232-200CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 7/16 DIN jack cable assembly PE3C8232-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8232-200CM can also be used in the other direction and will be 7/16 DIN female 4 hole flange to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 200 cm length using TFT-402 coax using Times Microwave components.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3C9622-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-200CM can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-200CM can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $189.99
10 : $186.19
25 : $182.39
100 : $178.59

PE3W00832-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Male Low Loss Cable 200 cm Length Using LMR-400 Coax., Radio frequency assembly SMA male to N male low loss cable 200 cm length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male low loss cable 200 cm length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3W00832-200CM, can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W00832-200CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00832-200CM can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 200 cm length using LMR-400 coax.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE3W08220

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to QMA Male Right Angle Cable Using LMR-240-UF Coax. PE3W08220 is a reverse polarity TNC female to QMA male right angle cable using LMR-240-UF coax. This Pasternack reverse polarity TNC female to QMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm QMA for connector 2. TNC to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08220 TNC reverse polarity female to QMA male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13672-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Push-On SMP Female to Smooth Bore SMP Male Bulkhead Cable Using PE-SR405AL Coax in 200CM., Radio frequency assembly push-on SMP female to smooth bore SMP male bulkhead cable using PE-SR405AL coax in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Push-on SMP female to smooth bore SMP male bulkhead cable using PE-SR405AL coax in 200CM, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP bulkhead cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and male on end 2. This SMP to SMP cable is a female to male coax assembly, PE3W13672-200CM, can also be known as a SMP jack to SMP plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP plug cable assembly PE3W13672-200CM is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP male bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13672-200CM can also be used in the other direction and will be SMP male bulkhead to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP plug bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to smooth bore SMP male bulkhead cable using PE-SR405AL coax in 200CM.

1 : $193.99
25 : $184.29
50 : $174.59
100 : $166.83

PE3W22017

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 1.85mm Female Bulkhead to BNC Female Bulkhead Cable Using PE-P086HF Coax. PE3W22017 is a 1.85mm female bulkhead to BNC female bulkhead cable using PE-P086HF coax. This Pasternack 1.85mm female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 1.85mm bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22017 1.85mm female bulkhead to BNC female bulkhead cable assembly is constructed with PE-P086HF coax.

PE3W22062

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Cable Using RG405 Coax. PE3W22062 is a TNC male to TNC female cable using RG405 coax. This Pasternack TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22062 TNC male to TNC female cable assembly is constructed with RG405 coax.

Teledyne HiRel

5962-9172202Q2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9322001M2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9220206MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

M38510/32203BFA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-87622012A

Teledyne HiRel

DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant

5962-9220101MCA

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT
RoHS : Not Compliant

5962-9172202QEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9220206M2A

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9220202MFA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9322001QRA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9172202QFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9172201MXA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9052201GA

Teledyne HiRel

PERIPHERAL DRIVER, DUAL NAND, CMOS-COMPATIBLE, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9220001M3A

Teledyne HiRel

LATCH, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9220202MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

Venkel Ltd.

SAFC2208C0G502-220JNE

VENKEL LTD

Safety Cap;2208;C0G;X1/Y2;22pF;�5%
RoHS : Compliant

SAFC2220C0G502-220JNE

VENKEL LTD

Safety Cap;2220;C0G;X1/Y2;22pF;�5%
RoHS : Compliant

SAFC2208C0G502-181JNE

VENKEL LTD

Safety Cap;2208;C0G;X1/Y2;180pF;�5%
RoHS : Compliant

RMPI252012GE-220MT

VENKEL LTD

Rect Min Power Inductor;252012;General;Epoxy;22uH;�20%
RoHS : Compliant

PWCR0402-AK-2202FT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;22K;�1%
RoHS : Compliant

PWCR0402-AK-4220DT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;422R;�0.5%
RoHS : Compliant

PWCR0805-RK-2204DT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;2.2M;�0.5%
RoHS : Compliant

PWCR1206-VK-4220FT

VENKEL LTD

Pulse Withstanding CR;1206;1/2W;�100PPM;422R;�1%
RoHS : Compliant

TFCR0402-16W-C-4220CT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;422R;�0.25%
RoHS : Compliant

TFCR0402-16W-K-2201CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;2.2K;�0.25%
RoHS : Compliant

TFCR0603-10W-E-2201BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;2.2K;�0.1%
RoHS : Compliant

TFCR0603-10W-E-4220FT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;422R;�1%
RoHS : Compliant

TFCR0603-16W-E-2202BT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;22K;�0.1%
RoHS : Compliant

TFCR0805-10W-E-2203CT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;220K;�0.25%
RoHS : Compliant

TFCR0805-8W-C-2203CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;220K;�0.25%
RoHS : Compliant

220MF61PUN-R2 Distributor

Link URL