28GVCK-R Price, Distributor, Stock

Key Specifications, Waveguide Size: WR-28, Flange Designation: UG, Material: Conductive Silicone Rubber. WR-28 Waveguide Gasket For UG Square Grooved Flanges, Conductive Silicone Elastomer. This conductive gasket is designed to connect two waveguide flanges using stainless steel screws and washers. The PEW28GG01 gasket is specifically made for WR-28 UG Grooved waveguide flanges. The gasket itself is made of Conductive Silicone Rubber, providing a durable and flexible seal. Pasternack has waveguide gaskets (both conductive and non-conductive), screws and other accessories that you need for your waveguides. Often people can forget to order items like screws or waveguide supports. Pasternack has a full line of waveguide accessories available for same day shipment so that you do not have to wait for weeks to get your system working.

1 : $24.89
10 : $23.89
25 : $22.9
100 : $21.9

PE3C1128/GR/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using PE-P142LL Coax with HeatShrink., Pasternack’s PE3C1128/GR/HS type N male to SMA female RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C1128/GR/HS can also be known as a type N plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1128/GR/HS RF cable has an FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to SMA female cable has a maximum VSWR of 1.322:1. This PE3C1128/GR/HS type N plug to SMA jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1128/GR/HS can also be used in the other direction and will be an SMA female to type N male cable assembly if the opposite connectivity is required. This type N plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.

Venkel Ltd.

WRFI0603-S-R28GT

VENKEL LTD

Wirewound RF Inductor;0603;280nH;�2%
RoHS : Not Compliant

28GVCK-R Distributor

Link URL