| Electronic Components Datasheet Search |
|
35HG-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | EV35H80A | Microchip Technology Inc | KSZ9131 EDS2 Daughter Card, Projected EOL: |
| 30 | |
| APTGT35H120T3G | Microchip Technology Inc | DOR CC3052, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
![]() Richardson RFPD | SA324240F35HLR | CTS Corporation | OSCILLATOR CRYSTAL RoHS : Compliant |
| 0 | |
| LTC2635HUD-HMI8#PBF | Analog Devices Inc | DAC 4-CH 8-bit 16-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| 135HC6700K4TM6 | Knowles CDE | Metalized Film Capacitor RoHS : Compliant |
| 0 | ||
| LTC2635HUD-HMI8#TRPBF | Analog Devices Inc | DAC 4-CH 8-bit 16-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| LTC2635HMSE-LZ8#PBF | Analog Devices Inc | DAC 4-CH 8-bit 10-Pin MSOP EP Tube RoHS : Compliant |
| 0 | ||
| LTC2635HUD-LMO8#PBF | Analog Devices Inc | DAC 4-CH 8-bit 16-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| EGPD630ELL162ML35H | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitors RoHS : Compliant | 0 | |||
| TDH35H200RJE | Ohmite Mfg Co | TDH35H200RJE RoHS : Compliant | 0 | |||
| 135HC3A600K2SM6 | Knowles CDE | Cap Film 1.33uF 600VAC PP 10% (68 X 30.2 X 30mm) S RoHS : Compliant |
| 0 | ||
| EVA2035-H | Lantronix Inc | Evaluation Board For A2035-H RoHS : Not Compliant | 0 | |||
| LTC2635HUD-LMO10#PBF | Analog Devices Inc | DAC 4-CH 10-bit 16-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| EGPD350ELL332MU35H | United Chemi-Con Inc | EGPD350ELL332MU35H RoHS : Compliant | 0 | |||
| EGPD350ELL622MM35H | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitors RoHS : Compliant | 0 | |||
| LTC2635HMSE-LMI10#TRPBF | Analog Devices Inc | DAC 4-CH 10-bit 10-Pin MSOP EP T/R RoHS : Compliant |
| 0 | ||
| 335HC5750KR | Knowles CDE | Cap Film 3.3uF 750VAC PP 10% (80 X 71.5mm) Screw M RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | BSP135H6327XTSA1 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 13,000 | ||
| F6QA2G535H2JG-J | TAIYO YUDEN | INSTOCK | 4,927 | |||
| U635H256-S2K25ZG1 | SMTEK International | INSTOCK | 2,390 | |||
| A2I35H060NR1 | NXP Semiconductors | INSTOCK RoHS : Compliant | 2,000 | |||
| 35HVH150M | SUNC | INSTOCK | 1,941 | |||
| 35HVP100MT+P | SUNC | INSTOCK | 479 | |||
| BSP135 H6327 | Infineon Technologies AG | INSTOCK | 286 | |||
| TA8435H | INSTOCK | 273 | ||||
| LM335H | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 36 | |||
| C35HX739 | INSTOCK | 25 | ||||
| 35HT221MLC10X10,5EC | INSTOCK | 20 | ||||
| HYM71V16635HCT8-H | HYN | INSTOCK | 4 | |||
| HYM71V16635HVT8R-HAA | HYN | INSTOCK | 3 | |||
| TA8435HQ(5,WX) | Toshiba America Electronic Components | INSTOCK | 2 | |||
![]() Avnet Abacus | SA534081F35HDT | CTS Corporation | - Tape and Reel (Alt: SA534081F35HDT) RoHS : Compliant | 5,000 | ||
| HX6135HL | Pulse Electronics Corporation | (Alt: HX6135HL) RoHS : Not Compliant | 0 | |||
TAJD106K035HY![]() | Kyocera AVX Components | Surface Mount Tantalum Capacitor 10 uF 35 V 2917 734331 Metric 10 1 Ohm D Size Code - Tape and Reel (Alt: TAJD106K035HY) RoHS : Not Compliant | 0 | |||
| TAP685K035HSB | Kyocera AVX Components | Tantalum Capacitor 68 uF 35 V 10 Radial Leaded 25 Ohm 6 mm 115 mm (Alt: TAP685K035HSB) RoHS : Compliant | 0 | |||
| SA324240F35HLR | CTS Corporation | - Tape and Reel (Alt: SA324240F35HLR) RoHS : Compliant | 0 | |||
| SA254192F35HAR | CTS Corporation | - Tape and Reel (Alt: SA254192F35HAR) RoHS : Compliant | 0 | |||
| SA324100F35HLR | CTS Corporation | - Tape and Reel (Alt: SA324100F35HLR) RoHS : Compliant | 0 | |||
| SA532080F35HDT | CTS Corporation | Crystal 8MHz 18pF 2Pin SMD TR - Tape and Reel (Alt: SA532080F35HDT) RoHS : Compliant | 0 | |||
| SA254370F35HAR | CTS Corporation | Crystal 37MHz 10pF 4Pin SMD TR - Tape and Reel (Alt: SA254370F35HAR) RoHS : Compliant | 0 | |||
| SA204400F35HAR | CTS Corporation | Crystal 40MHz 10pF 4Pin SMD TR - Tape and Reel (Alt: SA204400F35HAR) RoHS : Compliant | 0 | |||
| SA324327F35HLR | CTS Corporation | Crystal 32768MHz 12pF 4Pin SMD TR - Tape and Reel (Alt: SA324327F35HLR) RoHS : Compliant | 0 | |||
| SRR0735HA-330M | Bourns Inc | Power Inductor SMD 33 H 1 A Shielded 104 A SRR0735HA Series - Tape and Reel (Alt: SRR0735HA-330M) RoHS : Compliant | 0 | |||
| 445C35H16M00000 | CTS Corporation | - Tape and Reel (Alt: 445C35H16M00000) RoHS : Compliant | 0 | |||
445I35H13M00000![]() | CTS Corporation | - Tape and Reel (Alt: 445I35H13M00000) RoHS : Compliant | 0 | |||
| 445A35H12M00000 | CTS Corporation | - Tape and Reel (Alt: 445A35H12M00000) RoHS : Compliant | 0 | |||
![]() Avnet Asia | KS DDLN31.23-5H7H-67-J3T3-200-R18-VL | ams OSRAM Group | (Alt: KS DDLN31.23-5H7H-67-J3T3-200-R18-VL) RoHS : Compliant | 0 | ||
| SA324400F35HLR | CTS Corporation | (Alt: SA324400F35HLR) RoHS : Compliant | 0 | |||
| KS DDLN31.23-5H6H-67-J3T3-200-R18-VL | ams OSRAM Group | OOSKS DDLN31.23-5H6H-67-J3T3-200-R18-VL (Alt: KS DDLN31.23-5H6H-67-J3T3-200-R18-VL) RoHS : Compliant | 0 | |||
TAJD685K035HNJ![]() | Kyocera AVX Components | (Alt: TAJD685K035HNJ) RoHS : Compliant | 0 | |||
| SA532160F35HDT | CTS Corporation | (Alt: SA532160F35HDT) RoHS : Compliant | 0 | |||
| 10127402-35H1400LF | Amphenol Corporation | (Alt: 10127402-35H1400LF) RoHS : Compliant | 0 | |||
| KS DDLN31.23-5H7H-67-J3Q3-200-R18-MAG | ams OSRAM Group | (Alt: KS DDLN31.23-5H7H-67-J3Q3-200-R18-MAG) RoHS : Compliant | 0 | |||
| B39431B3735H110 | Qualcomm RFFE Filter Products | (Alt: B39431B3735H110) RoHS : Compliant | 0 | |||
![]() Avnet Silica | T835H-8I | STMicroelectronics | TRIAC 12A 800V 3Pin TO220AB Tube (Alt: T835H-8I) RoHS : Compliant | 23,750 | ||
T2035H-6T![]() | STMicroelectronics | Thyristor TRIAC 600V 210A 3Pin3Tab TO220AB Tube (Alt: T2035H-6T) RoHS : Compliant | 5,900 | |||
T3035H-6I![]() | STMicroelectronics | Triac 600 V 30 A TO220AB 1 V 270 A 60 mA (Alt: T3035H-6I) RoHS : Compliant | 5,500 | |||
T1035H-6G-TR![]() | STMicroelectronics | Thyristor TRIAC 600V 105A 3Pin2Tab D2PAK TR (Alt: T1035H-6G-TR) RoHS : Compliant | 4,000 | |||
| T1235H-8G | STMicroelectronics | TRIAC 12A 800V 3Pin DPAK Tube (Alt: T1235H-8G) RoHS : Compliant | 3,000 | |||
| T3035H-8G-TR | STMicroelectronics | TRIAC 155V 800V 0005mA 3Pin TO263 TR (Alt: T3035H-8G-TR) RoHS : Compliant | 3,000 | |||
T3035H-6T![]() | STMicroelectronics | Thyristor TRIAC 600V 284A 3Pin3Tab TO220AB Isolated Tube (Alt: T3035H-6T) RoHS : Compliant | 2,800 | |||
| T2035H-6G | STMicroelectronics | Thyristor TRIAC 600V 210A 3Pin2Tab D2PAK Tube (Alt: T2035H-6G) RoHS : Compliant | 2,500 | |||
| T2035H-8I | STMicroelectronics | Triac 800V 20A 35mA 3Pin TO220AB Insulated Through Hole Tube (Alt: T2035H-8I) RoHS : Compliant | 2,300 | |||
| T1635H-8G | STMicroelectronics | TRIAC 800V 16A 3Pin D2PAK Tube (Alt: T1635H-8G) RoHS : Compliant | 2,000 | |||
| T2035H-8G-TR | STMicroelectronics | Triac 800V 20A 35mA 3Pin D2PAK Surface Mount TR (Alt: T2035H-8G-TR) RoHS : Compliant | 2,000 | |||
| T1235H-8I | STMicroelectronics | TRIAC 12A 800V 3Pin TO220AB Tube (Alt: T1235H-8I) RoHS : Compliant | 1,700 | |||
| T3035H-6G | STMicroelectronics | Triac 600 V 30 A TO263 D2PAK 1 V 270 A 60 mA (Alt: T3035H-6G) RoHS : Compliant | 700 | |||
T835H-6I![]() | STMicroelectronics | Thyristor TRIAC 600V 84A 3Pin3Tab TO220AB Insulated Tube (Alt: T835H-6I) RoHS : Compliant | 200 | |||
T1635H-6I![]() | STMicroelectronics | Triac 600 V 16 A 1 V 160 A 35 mA (Alt: T1635H-6I) RoHS : Compliant | 200 | |||
![]() Braemac Americas-Symmetry | EC3AB35HMS | Cincon Electronics Corporation | LOW POWER DC-DC RoHS : Compliant |
| 0 | |
| EC3A35HS-E | Cincon Electronics Corporation | LOW POWER DC-DC RoHS : Compliant |
| 0 | ||
| EC3A35H-E | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| EC3AB35H | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| EC3A35HM-E | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| EC3A35HM | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| EC3AB35HM | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| EC3A35HMS-E | Cincon Electronics Corporation | LOW POWER DC-DC RoHS : Compliant |
| 0 | ||
| A5135H | Lantronix Inc | GNSS A5135H - SiRFstarV-based 52-channel GNSS receiver built-in patch antenna, -147 dBm acquisition sensitivity, -160 dBm navigation sensitivity, I C MEMS interface |
| 0 | ||
| EC3A35HMS | Cincon Electronics Corporation | LOW POWER DC-DC RoHS : Compliant |
| 0 | ||
| EC3A35H | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | LSR22/35HM300 | Nemco Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 400 | ||
| LSR22/35HK | Nemco Electronics Corporation | IN STOCK SHIP TODAY | 370 | |||
| PT1.5/4-3.5-H | Phoenix Contact | IN STOCK SHIP TODAY |
| 355 | ||
| PCT22/35HK | Nemco Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| 196D154X9035HA1 | Vishay Sprague | IN STOCK SHIP TODAY |
| 15 | ||
| LP153M035H9P3 | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 13 | ||
| LP822M035H3P3 | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 2 | ||
| U235H | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY | 1 | |||
| LM335H | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | D5-PR35H032NA | Southco |
| 25 | ||
| 35HSP016B | Essentra Components | HSP 16 HEX SPACER BLACK M111 | 0 | |||
| 35HSP018 | Essentra Components | HEX SELF THREAD STANDOFF, 8 SC | 0 | |||
| 35HSP225 | Essentra Components | HEX SELF THREAD STANDOFF, 6 SC | 0 | |||
| 35HSP001 | Essentra Components | HEX SELF THREAD STANDOFF, 4 SC | 0 | |||
| 35HSP038 | Essentra Components | HEX SELF THREAD STANDOFF, 6 SC | 0 | |||
| 35HSP119 | Essentra Components | HEX SELF THREAD STANDOFF, 4 SC | 0 | |||
| 35HSP008 | Essentra Components | 0 | ||||
| D5-PR35H026NA | Southco | 0 | ||||
| D5-PR35H003NA | Southco | D5-PR35H003NA | 0 | |||
| D5-PR35H015MCYNA | Southco | D5-PR35H015MCYNA | 0 | |||
| D5-PR35H022 | Southco | DZUS PANEL, REC STRIP, RT ANG | 0 | |||
| 35HSP041 | Essentra Components | HEX SELF THREAD STANDOFF, 8 SC | 0 | |||
| 35HSP012 | Essentra Components | HEX SELF THREAD STANDOFF, 8 SC | 0 | |||
| D5-PR35H041NA | Southco | D5-PR35H041NA | 0 | |||
![]() EBV Elektronik | TDA8035HN/C2/S1J![]() | NXP Semiconductors | Specialized Interface Electronic Payments Identification Bank Card Readers Pay TV 27 V (Alt: TDA8035HN/C2/S1J) RoHS : Compliant | 144,000 | ||
| BSP135H6906XTSA1 | Infineon Technologies AG | Trans MOSFET NCH 600V 012A 4Pin SOT223 TR (Alt: SP001058594) RoHS : Compliant | 9,000 | |||
T2035H-6I![]() | STMicroelectronics | Triac 600 V 20 A TO220AB 1 V 200 A 35 mA (Alt: T2035H-6I) RoHS : Compliant | 3,750 | |||
T835H-6G-TR![]() | STMicroelectronics | Triac 600 V 8 A TO263 D2PAK 1 V 80 A 35 mA (Alt: T835H-6G-TR) RoHS : Compliant | 2,000 | |||
| T1235H-8G-TR | STMicroelectronics | TRIAC 12A 800V 3Pin DPAK TR (Alt: T1235H-8G-TR) RoHS : Compliant | 2,000 | |||
| BYS10-35HE3_A/H | Vishay Intertechnologies | (Alt: BYS10-35HE3_A/H) RoHS : Compliant | 1,800 | |||
| T1635H-8I | STMicroelectronics | Triac 800 V 16 A TO220AB 13 V 160 A 35 mA (Alt: T1635H-8I) RoHS : Compliant | 1,650 | |||
T1635H-6I![]() | STMicroelectronics | Triac 600 V 16 A 1 V 160 A 35 mA (Alt: T1635H-6I) RoHS : Compliant | 1,500 | |||
| T2035H-8T | STMicroelectronics | Triac 800 V 20 A TO220AB 13 V 200 A 35 mA (Alt: T2035H-8T) RoHS : Compliant | 1,500 | |||
T1035H-6G-TR![]() | STMicroelectronics | Thyristor TRIAC 600V 105A 3Pin2Tab D2PAK TR (Alt: T1035H-6G-TR) RoHS : Compliant | 1,000 | |||
| T2035H-6G-TR | STMicroelectronics | Triac 600 V 20 A TO263 D2PAK 1 V 200 A 35 mA (Alt: T2035H-6G-TR) RoHS : Compliant | 1,000 | |||
TDA8035HN/C2/S1QL![]() | NXP Semiconductors | Specialized Interface Smart Card Electronic Payments Identification Bank Card Readers Pay TV (Alt: TDA8035HN/C2/S1QL) RoHS : Compliant | 980 | |||
T1235H-6T![]() | STMicroelectronics | Triac 600 V 12 A TO220AB 1 V 120 A 35 mA (Alt: T1235H-6T) RoHS : Compliant | 850 | |||
| T3035H-8T | STMicroelectronics | TRIAC 800V 900V 30A 3Pin ThruHole TO220AB (Alt: T3035H-8T) RoHS : Compliant | 550 | |||
| BXRE-35H1000-C-82 | Bridgelux Inc | V10C Generation 8 (Alt: BXRE-35H1000-C-82) RoHS : Compliant | 280 | |||
![]() Flip Electronics | A5G35H120NT2 | NXP Semiconductors | Stock RoHS : Compliant | 185,123 | ||
| P3T1035HUKAZ | NXP Semiconductors | Stock | 28,000 | |||
| A5G35H110NT4 | NXP Semiconductors | Stock RoHS : Compliant | 20,000 | |||
| S35HS256TFANHI213 | Infineon Technologies AG | Stock | 17,500 | |||
| S35HS256TFANHI210 | Infineon Technologies AG | Stock | 16,900 | |||
| A5G35H055NT4 | NXP Semiconductors | Stock RoHS : Compliant | 2,500 | |||
| S35HL256TFAMHI213 | Infineon Technologies AG | Stock | 1,450 | |||
![]() Maritex | HL-A-2835H203BC-2-S1-08 | Hongli Zhihui Group Co LTD | LED HL-A-2835H203BC-2-S1-08; SMD; 2835 PLCC2; blue; 464-474nm; 1000-1300mcd/60mA; 2.8-3.6V; water clear; 120 degrees; 3.5x2.8x0.7mm |
| 278,970 | |
| HL-AM-2835H421W-S1-08-HR3 3000K 3-STEP | Hongli Zhihui Group Co LTD | LED HL-AM-2835H421W-S1-08-HR3; SMD; PLCC2 2835; warm white 3000K; 3-step; min. 27lm/60mA; 2.6-3.2V; CRI min 80; 120 deg; yellow diffused lens; 3.3x2.8x0.7mm |
| 10,279 | ||
| BSP135H6327XTSA1 | Infineon Technologies AG | MOSFETs; BSP135H6327XTSA1; INFINEON TECHNOLOGIES; 600 V; 120 mA; 20 V; 1.8 W RoHS : Compliant |
| 9,257 | ||
| TACTD35H25B250 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions 3.4x4.7; h=2.5mm; vertical; operating force 250gf; button: round |
| 5,703 | ||
| TACTDB35H50B160-CT | CONNTHERM | Tact Switch; SMD; dimensions 3.0x6.0; h=3.5mm; right angle; operating force 160gf |
| 4,560 | ||
| AM-2835H421W-S1-08-HR3-3SDCM 5000K 3STEP | Hongli Zhihui Group Co LTD | LED PLCC2 2835; neutral white (daylight) 5000K; 3-step; typ. 28lm/60mA; 2.6-3.2V; CRI min 80; 120 deg; yellow diffused lens; 3.3x2.8x0.7mm; Honglitronic |
| 4,000 | ||
| BSP135H6433XTMA1 | Infineon Technologies AG | MOSFETs; BSP135H6433XTMA1; INFINEON TECHNOLOGIES; 600 V; 120 mA; 20 V; 1.8 W |
| 4,000 | ||
| AM-2835H489W-S1-08HL-HR3(R9)-3SDCM 6000K | Hongli Zhihui Group Co LTD | LED LED HL-AM-2835H489W-S1-08HL-HR3(R9)-3SDCM; PLCC2 2835; cool white 6000K; min. 25lm/60mA; 2.8-3.4V; CRI min 80; 120 deg; yellow diffused lens; 3.3x2.8x0.7mm; Honglitronic /16000 |
| 3,950 | ||
| AM-2835H489W-S1-08HL-HR3(R9)-3SDCM 4000K | Hongli Zhihui Group Co LTD | LED LED HL-AM-2835H489W-S1-08HL-HR3(R9)-3SDCM; PLCC2 2835; neutral white 4000K; min. 25lm/60mA; 2.8-3.4V; CRI min 80; 120 deg; yellow diffused lens; 3.3x2.8x0.7mm; Honglitronic /16000 |
| 3,480 | ||
| TACTD35H50I250 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions 3.0x6.0; h=5.0mm; vertical; operating force 260gf; button: rectangular |
| 2,805 | ||
| HL-AM-2835H489W-S1-08L-HR3 6500K3-STEP | Hongli Zhihui Group Co LTD | LED HL-AM-2835H489W-S1-08L-HR3; SMD; PLCC2 2835; cool white 6500K; 3-step; typ. 25lm/60mA; 2.8-3.4V; CRI min 80; 120 degrees; yellow diffused; 3.5x2.8x0.7mm |
| 1,129 | ||
| TACTS35H43B500 | Innocent Electronics Co Ltd | Tact Switch; THT; dimensions 6x3.5; h=4.3mm; vertical; operating force 520gf; button: rectangular |
| 95 | ||
| TACTS35H50B160-JL | Jialong | Tact Switch; THT; dimensions 3.5x6.0; h=5.0mm; vertical; operating force 160gf; button: rectangular |
| 26 | ||
| TACTD35H50B160-CT | CONNTHERM | Tact Switch; SMD; dimensions 3.0x6.0; h=5.0mm; vertical; operating force 160gf; button: rectangular |
| 10 | ||
| TACTDK35H50R160-CT | CONNTHERM | Tact Switch; SMD; dimensions 3.0x6.0; h=2.5mm; vertical; operating force 160gf; button: rectangular |
| 3 | ||
![]() Master Electronics | PT-1-5/-9-3-5-H | Phoenix Contact | PCB terminal block - nominal current: 17.5 A - rated voltage (III/2): 200 V - nominal cross section: 1.5 mm² - pitch: 3.5 mm - number of positions: 9 - connection method: Screw connection with wire protector - mounting: Wave soldering - conductor/PCB connection direction: 0 ° - color: green - Pin layout: Linear pinning - Solder pin [P]: 4.5 mm RoHS : Compliant |
| 534 | |
| 35HDBAU | Switchcraft Conxall | Phone Audio Connector - 3 Contacts - Plug - 3.5 mm - Cable Mount - Gold Plated Contacts - Metal Body. RoHS : Compliant |
| 238 | ||
| PC-35-HC/-5-GF-15-00 | Phoenix Contact | PCB headers - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 5 - pitch: 15 mm - color: green - contact surface: Silver - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 4.6 mm RoHS : Compliant |
| 0 | ||
| CW1K-3DE03-5H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| CW4K-3EE03-5H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| IPC-35-HC/-5-STGF-15-00 | Phoenix Contact | PCB connector - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 5 - pitch: 15 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Silver RoHS : Compliant |
| 0 | ||
| IPCV-35-HC/-6-GF-15-00 | Phoenix Contact | PCB headers - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 6 - pitch: 15 mm - color: green - contact surface: Silver - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 4.6 mm RoHS : Compliant |
| 0 | ||
| PCV-35-HC/-6-GF-15-00 | Phoenix Contact | PCB headers - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 6 - pitch: 15 mm - color: green - contact surface: Silver - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 4.6 mm RoHS : Compliant |
| 0 | ||
| M80X335H | RAF Electronic Hardware | Brass Tapered Heat-Set Threaded Inserts - M8.0X1.25 mm Thread Size - 0.335 Installed Length RoHS : Compliant |
| 0 | ||
| SRR0735HA-821M | Bourns Inc | Ind 7.3x7.3x3.5 820uH 20% 0.19A shd RoHS : Compliant |
| 0 | ||
| MKDS-1/-4-3-5-HT-BK | Phoenix Contact | PCB terminal block - nominal current: 13.5 A - rated voltage (III/2): 200 V - nominal cross section: 1.5 mm² - pitch: 3.5 mm - number of positions: 4 - connection method: Screw connection with tension sleeve - mounting: THR soldering - conductor/PCB connection direction: 0 ° - color: black - Pin layout: Linear pinning - Solder pin [P]: 3.5 mm RoHS : Compliant |
| 0 | ||
| PC-35-HC/-2-GF-15-00 | Phoenix Contact | PCB headers - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 2 - pitch: 15 mm - color: green - contact surface: Silver - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 4.6 mm RoHS : Compliant |
| 0 | ||
| IPCV-35-HC/-3-GF-15-00 | Phoenix Contact | PCB headers - nominal current: 125 A - rated voltage (III/2): 1000 V - nominal cross section: 35 mm² - number of positions: 3 - pitch: 15 mm - color: green - contact surface: Silver - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 4.6 mm RoHS : Compliant |
| 0 | ||
| CW1K-32DE11N3-5H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| CW4K-3GE03-5H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06735/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMA Male Right Angle Cable Using LMR-195 Coax with HeatShrink. PE3W06735/HS is a SMB plug right angle to SMA male right angle cable using LMR-195 coax. This Pasternack SMB plug right angle to SMA male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06735/HS SMB plug right angle to SMA male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 17,217 | ||
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,106 | ||
| PE3C1135/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with heatshrink. |
| 2,106 | ||
| PE33635/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to BNC Male Cable 48 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N male right angle to BNC male cable 48 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to BNC male cable 48 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assembly has male gender on end 1 and male on end 2. PE33635/HS-48 can also be known as a right angle type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. N type plug to BNC plug cable assembly PE33635/HS-48 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33635/HS-48 RF cable are available on our downloadable PDF datasheet.PE33635/HS-48 can also be used in the other direction and will be BNC male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 2,022 | ||
| PE3C5535/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. FME Jack to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FME cable connection on one end and a right angle SMA cable connection on the other. Our low loss FME to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3C5535/HS-48 can also be known as a low loss FME female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5535/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. FME female to SMA plug cable assembly PE3C5535/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5535/HS-48 can also be used in the other direction and will be a right angle SMA male to FME jack cable assembly if the opposite connectivity is required. Low loss FME female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to SMA cable assembly for quick shipment worldwide. Variations of FME and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 384 | ||
| PE3C5535/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. FME Jack to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly FME jack to SMA male right angle low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The FME jack to SMA male right angle low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FME cable connection on one end and a right angle SMA cable connection on the other. Our low loss FME to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3C5535/HS-24 can also be known as a low loss FME female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5535/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. FME female to SMA plug cable assembly PE3C5535/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5535/HS-24 can also be used in the other direction and will be a right angle SMA male to FME jack cable assembly if the opposite connectivity is required. Low loss FME female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to SMA cable assembly for quick shipment worldwide. Variations of FME and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 384 | ||
| PE3C6335/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to UHF Female Low Loss Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 36 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-36 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-36 can also be used in the other direction and will be UHF female to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 36 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3W06535/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMB Plug Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax with HeatShrink. PE3W06535/HS is a SMB plug right angle to SMA male right angle cable using RG55 coax. This Pasternack SMB plug right angle to SMA male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W06535/HS SMB plug right angle to SMA male right angle cable assembly is constructed with RG55 coax. | 0 | |||
| PE3W15135/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug to 75 Ohm F Male Cable Using 75 Ohm RG59 Coax with HeatShrink. PE3W15135/HS is a SMB plug to F male cable using RG59 coax. This Pasternack SMB plug to F male cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm F for connector 2. Our plug SMB to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W15135/HS SMB plug to F male cable assembly is constructed with RG59 coax. | 0 | |||
| PE3W22935/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Right Angle Bulkhead Cable Using RG316 Coax with HeatShrink. PE3W22935/HS is a SMA male right angle to SMA female right angle bulkhead cable using RG316 coax. This Pasternack SMA male right angle to SMA female right angle bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22935/HS SMA male right angle to SMA female right angle bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3635/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Cable Using RG213 Coax with HeatShrink. PE3635/HS is a UHF male to UHF male cable using RG213 coax. This Pasternack UHF male to UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male UHF to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3635/HS UHF male to UHF male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W00335/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-200 Coax with HeatShrink. PE3W00335/HS is a N male right angle to N male right angle cable using LMR-200 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00335/HS N male right angle to N male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03435/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Jack to SMA Male Cable Using RG316 Coax with HeatShrink., Radio frequency assembly SMB jack to SMA male cable using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to SMA male cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a SMA cable connection on the other. Our a SMB to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W03435/HS can also be known as a SMB female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W03435/HS RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. SMB female to SMA plug cable assembly PE3W03435/HS is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03435/HS can also be used in the other direction and will be SMA male to SMB jack cable assembly if the opposite connectivity is required. SMB female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMA RF cable assembly as per your requirements. | 0 | |||
| PE3835/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3835/HS, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3835/HS is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3835/HS can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable using RG316 coax with heatshrink. | 0 | |||
| PE35135/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. N Male to MCX Plug Cable Using RG178 Coax with HeatShrink. PE35135/HS is a N male to MCX plug cable using RG178 coax. This Pasternack N male to MCX plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. Our male N to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35135/HS N male to MCX plug cable assembly is constructed with RG178 coax. | 0 | |||
![]() Vyrian | T835H-6G![]() | STMicroelectronics | TRIAC, 600V V(DRM), 8A I(T)RMS RoHS : Compliant | 13,041 | ||
| LTC2635HUD-LMI8-PBF | Analog Devices Inc | 11,881 | ||||
T2035H-600TRG![]() | STMicroelectronics | Snubberless TRIAC, 600V V(DRM), 20A I(T)RMS, TO-220AB RoHS : Compliant | 11,742 | |||
| MAX16135HRB-V-T | Analog Devices (Maxim Integrated) | 11,645 | ||||
| LTC2635HMSE-LMX10-TRPBF | Analog Devices Inc | 11,173 | ||||
| LTC2635HMSE-LMI8-TRPBF | Analog Devices Inc | 9,734 | ||||
| LTC2635HMSE-LMX10-PBF | Analog Devices Inc | 9,144 | ||||
| LTC2635HMSE-LZ8#PBF | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 3.5us Settling Time, PDSO10 RoHS : Compliant | 8,962 | |||
| LTC2635HUD-HMI8#PBF | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 3.9us Settling Time, PQCC16 RoHS : Compliant | 8,704 | |||
| LTC2335HLX-18 | Analog Devices Inc | 7,903 | ||||
| LTC2635HUD-HMI8#TRPBF | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 3.9us Settling Time, PQCC16 RoHS : Compliant | 5,483 | |||
| LTC2635HMSE-HMX12#TRPBF | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 5us Settling Time, PDSO10 RoHS : Compliant | 5,177 | |||
| STGFW35HF60W | STMicroelectronics | Insulated Gate Bipolar Transistor, 36A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant | 4,134 | |||
| EP610LC-35H | Altera Corporation | 2,893 | ||||
| TA8435HQ(5) | Toshiba America Electronic Components | 263 | ||||
![]() Win Source Electronics | BSP135 H6327 | Infineon Technologies AG | Trans MOSFET N-CH 600V 0.12A Automotive 4-Pin(3+Tab) SOT-223 T/R |
| 61,042 | |
| BSP135H6327XTSA1 | Infineon Technologies AG | MOSFET N-CH 600V 120MA SOT-223 RoHS : Compliant |
| 54,170 | ||
| LPS35HWTR | STMicroelectronics | MEMS PRESSURE SENSOR: 260-1260 H RoHS : Compliant |
| 53,802 | ||
T3035H-6I![]() | STMicroelectronics | Snubberless high temperature 30 A Triacs RoHS : Compliant |
| 20,000 | ||
| PCA9535HF | Nexperia | IC I/O EXPANDER I2C 16B 24HWQFN |
| 6,000 | ||
| TDA8035HN/C1 | Nexperia | Smart Card Interface 3.3V 450mW 32-Pin HVQFN EP / IC SMARD CARD INTERFACE 32HVQFN |
| 4,029 | ||
T2035H-6I![]() | STMicroelectronics | TRIAC ALTERNISTOR 600V TO220ABFP RoHS : Compliant |
| 2,000 | ||
TA8435HQ![]() | Toshiba America Electronic Components | PWM CHOPPER TYPE BIPOLAR STEPPING MOTOR DRIVER |
| 1,986 | ||
TA8435H![]() | Toshiba America Electronic Components | PWM CHOPPER TYPE BIPOLAR STEPPING MOTOR DRIVER RoHS : Not Compliant |
| 1,980 | ||
T1635H-6I![]() | STMicroelectronics | TRIAC ALTERNISTOR 600V TO220AB RoHS : Compliant |
| 260 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |