Electronic Components Datasheet Search
  Indian  ▼
ALLDATASHEET.IN

X  



4051L-P16-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Pasternack Enterprises US
PE44058

Pasternack Enterprises Key Specifications, Polarity: Standard, Connector Series: UHF, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 300 MHz, Interface Type 1: RG58, Interface Type 2: RG303, Interface Type 3: RG141, Interface Type 4: PE-C195, Interface Type 5: PE-P195, Interface Type 6: LMR-195, Interface Type 7: .195 inch. UHF Female Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0.195 inch. PE44058 UHF female coaxial connector has an interface type of RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, .195 inch and a 50 Ohm impedance. Pasternack UHF female connector uses shield/contact crimp/solder as an attachment method. Our female UHF coaxial connector provides a minimum frequency of DC and a maximum frequency of 300 MHz. The Pasternack UHF female coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack UHF coaxial connector has a brass body with nickel plating. Our PE44058 UHF connector uses brass contact. This UHF female coaxial RF connector is RoHS and REACH compliant. This Pasternack female UHF connector will ship the same day as purchased. Our UHF female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom UHF connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.
1 : $29.79
25 : $28.3
50 : $26.81
100 : $25.62
278
PE3FCA405-10M

Pasternack Enterprises Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to ST UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA405-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 12-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA405-10M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements.
1 : $346.99
5 : $333.11
10 : $319.23
25 : $305.35
23
PE-SR405-NM-BULK

Pasternack Enterprises Key Specifications, Generic Name: 086 Semi Rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, RF Shielding: 165 dB, Frequency, Max: 60 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.125 in, Coax Type: Coax. 0.086 Semi Rigid Non-Magnetic Cable with Silver Plated Copper Conductor. The PE-SR405-NM-BULK part number from Pasternack is a non-magnetic coax cable that is semi-rigid. Pasternack semi-rigid coax RF cable has an impedance of 50 Ohm and a PTFE dielectric. This RF coaxial cable is ideal for general purpose test, custom cable assemblies, medical, military and aerospace and quantum computing applications. This PE-SR405-NM semi-rigid RF cable has a minimum RF shielding of 165 dB. Our coax cable from Pasternack has a maximum frequency of 60 GHz. Additional specifications for this PE-SR405-NM-BULK RF coaxial cable are on our downloadable PDF datasheet above. This semi-rigid coax RF cable has a one-time minimum bend radius of 0.125 inch. Our PE-SR405-NM coax cable can operate at temperatures ranging from -55 to +125 degrees C. The PE-SR405-NM-BULK semi-rigid RF cable has a solid copper center conductor with silver plating. This non-magnetic RF coaxial cable has an outer diameter of 0.086 inches. Pasternack non-magnetic coax cables are part of our RF, microwave, and millimeter wave components. These semi-rigid cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using PE-SR405-NM or other coax can be built and shipped the same business day as well.
1 : $14.19
5 : $13.91
10 : $13.62
25 : $13.34
14
PE15A4053F

Pasternack Enterprises Key Specifications, Frequency, Min: 500 MHz, Frequency, Max: 4 GHz, Gain, Min: 30 dB, 1dB Compression Point, Min: 30 dBm, Voltage, DC Typ: 12 Volts. 1 Watt P1dB, 500 MHz to 4 GHz, Medium Power Amplifier with Heatsink, SMA, 30 dB Gain, 6 dB NF. RF solid state power amplifier (SSPA) PE15A4053F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 1 Watt. Pasternack solid state power amplifier part number PE15A4053F SMA medium power amp has a 30 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 30 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 500 MHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 1 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.
1 : $8,060.0
5 : $7,737.6
10 : $7,415.2
25 : $7,092.8
7
PE3C4057-18

Pasternack Enterprises Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug Right Angle to N Female Bulkhead Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to N female bulkhead cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to N female bulkhead cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and N type bulkhead cable connection on the other. Our right angle MMBX to type N cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to type N cable is a plug to female coax assembly, PE3C4057-18, can also be known as a right angle MMBX male to N type jack cable assembly and will be shipped same-day as it is purchased. MMBX male to type N jack cable assembly PE3C4057-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4057-18 can also be used in the other direction and will be N type female bulkhead to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to type N cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to N female bulkhead cable 18 inch length using RG316-DS coax.
1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93
0
PE3W24405

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female to SMB Plug Cable Using LMR-195 Coax. PE3W24405 is a N female to SMB plug cable using LMR-195 coax. This Pasternack N female to SMB plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. Our female N to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24405 N female to SMB plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3M0405-12

Pasternack Enterprises Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Socket to MIL Size 12 Contact Socket Cable 12 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0405-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0405-12 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0405-12 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 socket to M39029 socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0405-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.
1 : $115.99
10 : $111.35
25 : $106.71
100 : $102.07
0
PE3C7840-50CM

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 7/16 DIN Male Right Angle to 7/16 DIN Female Low PIM Cable 19.68 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male right angle to 7/16 DIN female low PIM cable 19.68 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male right angle to 7/16 DIN female low PIM cable 19.68 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM right angle 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C7840-50CM, can also be known as a low PIM right angle 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C7840-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN right angle male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7840-50CM can also be used in the other direction and will be 7/16 DIN female to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to 7/16 DIN female low PIM cable 19.68 inch length using 1/4 inch superflexible coax.
1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91
0
PE3W04050

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Male Right Angle Cable Using LMR-195 Coax. PE3W04050 is a reverse polarity SMA male right angle to reverse polarity SMA male right angle cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04050 SMA reverse polarity male right angle to SMA reverse polarity male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W24058

Pasternack Enterprises Key Specifications, Connector Series 1: UHF, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. UHF Sexless to N Male Right Angle Cable Using LMR-195-UF Coax. PE3W24058 is a UHF sexless to N male right angle cable using LMR-195-UF coax. This Pasternack UHF sexless to N male right angle cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. UHF to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our sexless UHF to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24058 UHF sexless to N male right angle cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE33405/HS

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm PE-B150 Coax with HeatShrink. PE33405/HS is a BNC male to BNC male cable using PE-B150 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE33405/HS BNC male to BNC male cable assembly is constructed with PE-B150 coax.
0
PE3C5405

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity TNC Male Cable Using LMR-400-UF Coax., Radio frequency assembly N male to reverse polarity TNC male cable using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to reverse polarity TNC male cable using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our type N to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity TNC cable is a male to male coax assembly, PE3C5405, can also be known as a N type plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE3C5405 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5405 can also be used in the other direction and will be reverse polarity TNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male cable using LMR-400-UF coax.
0
PE3M0405-60

Pasternack Enterprises Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Socket to MIL Size 12 Contact Socket Cable 60 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0405-60 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0405-60 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0405-60 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 socket to M39029 socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0405-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.
1 : $128.99
10 : $123.83
25 : $118.67
100 : $113.51
0
PE3C4059

Pasternack Enterprises Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to TNC Female Bulkhead Cable Using RG316-DS Coax. PE3C4059 is a MMBX plug right angle to TNC female bulkhead cable using RG316-DS coax. This Pasternack MMBX plug right angle to TNC female bulkhead cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm TNC for connector 2. MMBX right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4059 MMBX plug right angle to TNC female bulkhead cable assembly is constructed with RG316-DS coax and the maximum VSWR is 1.4:1.
0
PE3W21405

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600-UF Coax. PE3W21405 is a N male to N male cable using LMR-600-UF coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21405 N male to N male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0

Teledyne HiRel
CD4050BMJ//883

Teledyne HiRel HEX NON-INVERTING BUFFER
0
M38510/01405BEA

Teledyne HiRel DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant
0
CD4050BMW//883

Teledyne HiRel HEX NON-INVERTING BUFFER
0
M38510/01405BFA

Teledyne HiRel DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant
0
CD4052BMJ//883

Teledyne HiRel DUAL 4-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER
0

Vyrian
M80-4051405

Harwin PLC Board Connector, 14 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, M2x0.4, Black Insulator, Plug
14,770
XS3A4051PWJ

Nexperia
RoHS : Compliant
12,200
XS3A4052PW

Nexperia DP4T
RoHS : Compliant
5,225
XS3A4051PW

Nexperia Single-Ended Multiplexer
RoHS : Compliant
4,451
XH4052XLBG432C

AMD Xilinx Field Programmable Gate Array, CMOS, PBGA432
RoHS : Not Compliant
4,063
XH4052XLBGG432C

AMD Xilinx Field Programmable Gate Array, CMOS, PBGA432
RoHS : Compliant
4,025
XQ2VP40-5FF1152N

AMD Xilinx Field Programmable Gate Array, 1050MHz, 43632-Cell, CMOS, PBGA1152
RoHS : Not Compliant
3,844
XCZU67DR-L1FFVE1156I5405

AMD Xilinx
3,619
XCZU67DR-2FSVE1156I5405

AMD Xilinx
3,509
XH4052XLPG411I

AMD Xilinx Field Programmable Gate Array, CMOS, CPGA411
3,493
XH4052XLBG432I

AMD Xilinx Field Programmable Gate Array, CMOS, PBGA432
RoHS : Not Compliant
3,062
XH4052XLPG411C

AMD Xilinx Field Programmable Gate Array, CMOS, CPGA411
2,296
XH4052XLBGG432I

AMD Xilinx Field Programmable Gate Array, CMOS, PBGA432
RoHS : Compliant
2,158
XQ2VP40-5FG676N

AMD Xilinx Field Programmable Gate Array, 4848 CLBs, 1050MHz, 43632-Cell, CMOS, PBGA676
RoHS : Not Compliant
1,378
XRA1405IL24-F

Exar Corporation Parallel I/O Port, 16-Bit, 16 I/O, CMOS
RoHS : Compliant
382

Wuhan P&S
MC14051BDR2G

onsemi 8-Channel Analog Multiplexer/Demultiplexer
RoHS : Compliant
1 : $0.48
100 : $0.31
500 : $0.26
1,000 : $0.24
420,000
MC74LVX4053DR2G

onsemi Analog Multiplexer/Demultiplexer
RoHS : Compliant
1 : $0.55
100 : $0.35
500 : $0.29
1,000 : $0.27
65,000
MC14052BDTR2G

onsemi Dual 4-Channel Analog Multiplexer/Demultiplexer
RoHS : Compliant
1 : $0.85
100 : $0.54
500 : $0.45
1,000 : $0.41
42,500
2N6405G

Littelfuse Inc 16 Ampere RMS Reverse Blocking Thyristor
RoHS : Compliant
1 : $0.89
100 : $0.71
500 : $0.65
1,000 : $0.61
10,000
MC74HC4051ADR2G

onsemi Analog Multiplexers /Demultiplexers
RoHS : Compliant
1 : $0.6129
100 : $0.3912
500 : $0.3226
1,000 : $0.2966
10,000
MC74VHC4051DTR2G

onsemi Analog Multiplexer/Demultiplexer
RoHS : Compliant
1 : $0.41
100 : $0.27
500 : $0.22
1,000 : $0.2
2,500

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com