| Electronic Components Datasheet Search |
|
4343-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | PM4343.682NLT | YAGEO Corporation | Inductor: wire; SMD; 6.8uH; ±20%; 14x12.8x6.5mm; 18A; H: 6.5mm RoHS : Compliant |
| 299 | |
| T4343M 09 | CK tools | Wrench: combination spanner; double-sided; 9mm; L: 130mm |
| 38 | ||
| 343430-58V | Eska | Fuse: fuse; 29mm; automotive; 20A; 58VDC; MAXI; zinc alloy |
| 19 | ||
| 48434331.HMT1 | Bopla | Enclosure: desktop; BoVersa; X: 120mm; Y: 170mm; Z: 52mm; white |
| 3 | ||
| T4343M 13 | CK tools | Wrench: combination spanner; double-sided; 13mm; L: 170mm |
| 2 | ||
| 48434331.HMT2 | Bopla | Enclosure: desktop; BoVersa; X: 120mm; Y: 216mm; Z: 55mm; white |
| 1 | ||
| 10043434 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 10; THT; 1.5A |
| 0 | ||
| 4-343-VDE | Bernstein AG | Screwdriver: voltage tester; insulated |
| 0 | ||
| 77 3434 3405 20004-0200 | Binder UK Ltd | Cable: for sensors; PIN: 4; M12 female angled,M8 male straight |
| 0 | ||
| 77 3434 3429 20003-0100 | Binder UK Ltd | Cable: for sensors; PIN: 3; M12 male straight,M12 female angled |
| 0 | ||
| 77 3434 3429 50708-1000 | Binder UK Ltd | Cable: for sensors; PIN: 8; M12 male straight,M12 female angled |
| 0 | ||
| 77 3434 3429 50712-1000 | Binder UK Ltd | Cable: for sensors; PIN: 12; M12 male straight,M12 female angled |
| 0 | ||
| 10043433 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 10; THT; 1.5A |
| 0 | ||
| 77 3434 3405 20003-0200 | Binder UK Ltd | Cable: for sensors; PIN: 3; M12 female angled,M8 male straight |
| 0 | ||
| 00104343 | GSR | Tap: metric; M33; right hand thread; 3.5; L: 125mm; finishing; 20mm |
| 0 | ||
![]() Avnet Americas | CYW43439KUBGT | Infineon Technologies AG | Multiprotocol Module, Bluetooth 5.0 LE/5.2 EDR/5.4, IEEE 802.11b/g/n, 2.4GHz to 2.5GHz - Tape and Reel (Alt: CYW43439KUBGT) RoHS : Compliant |
| 5,000 | |
| PA4343.272NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PA4343.272NLT) RoHS : Compliant |
| 2,500 | ||
| 45984-4343 | Molex | - Trays (Alt: 0459844343) RoHS : Compliant |
| 855 | ||
| CY8CPROTO-062S3-4343W | Infineon Technologies AG | 150-MHz Arm Cortex-M4 Dual-Core Wi-Fi BT Prototyping Kit - Bulk (Alt: CY8CPROTO-062S3-4343W) RoHS : Compliant |
| 18 | ||
| CYW9P62S1-43438EVB-01 | Infineon Technologies AG | PSOC 62S1 Wi-Fi BT Pioneer Kit - Bulk (Alt: CYW9P62S1-43438EVB-01) RoHS : Not Compliant | 15 | |||
| PA4343.103NLT | Pulse Electronics Corporation | Ind Power Shielded/Molded 10uH 20% 100kHz 10A (14 X 12.8 X 6.5mm) T/R - Tape and Reel (Alt: PA4343.103NLT) RoHS : Compliant |
| 0 | ||
| PA4343.473NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PA4343.473NLT) RoHS : Compliant |
| 0 | ||
FHL43-43-17/T710/T![]() | CTS Corporation | - Trays (Alt: FHL43-43-17/T710/T) RoHS : Compliant | 0 | |||
| R434314409 | Radiall | DIV 4W SMA 2-4GHZ - Bulk (Alt: R434314409) RoHS : Not Compliant |
| 0 | ||
| PM4343.142NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PM4343.142NLT) RoHS : Compliant |
| 0 | ||
| PM4343.223NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PM4343.223NLT) RoHS : Compliant |
| 0 | ||
| ARC6-24-34.3-LU-LD-2-1 | Samtec Inc | - Bulk (Alt: ARC6-24-34.3-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
| AER43432831725T | CTS Corporation | - Trays (Alt: AER43432831725T) RoHS : Compliant | 0 | |||
| S41X043430FP | CTS Corporation | - Tape and Reel (Alt: S41X043430FP) RoHS : Compliant | 0 | |||
| S42C043432JP | CTS Corporation | - Tape and Reel (Alt: S42C043432JP) RoHS : Compliant |
| 0 | ||
![]() Newark | 5-2394343-1 | TE Connectivity | Conn Housing, Rcpt, 3Pos, Natural; |Te Connectivity Amp 5-2394343-1 RoHS : Compliant |
| 35,400 | |
| CYW43438LKUBGT | Infineon Technologies AG | Single-Chip Combo Device, Bluetooth/Wifi; |Infineon Technologies CYW43438LKUBGT RoHS : Compliant |
| 5,000 | ||
| PA4343.301NLT | Pulse Electronics Corporation | Inductor, Shielded, Aec-Q200, 300Nh, 48A; |Pulse Electronics PA4343.301NLT RoHS : Compliant |
| 450 | ||
| PA4343.473NLT | Pulse Electronics Corporation | Power Inductor, 47Uh, Shielded, 9.5A; In |Pulse Electronics PA4343.473NLT RoHS : Compliant |
| 370 | ||
| PA4343.473NLT | Pulse Electronics Corporation | Power Inductor, 47Uh, Shielded, 9.5A; In |Pulse Electronics PA4343.473NLT RoHS : Compliant |
| 370 | ||
| PA4343.451NLT | Pulse Electronics Corporation | Inductor, Shielded, Aec-Q200, 450Nh, 42A; |Pulse Electronics PA4343.451NLT RoHS : Compliant |
| 290 | ||
| PA4343.451NLT | Pulse Electronics Corporation | Inductor, Shielded, Aec-Q200, 450Nh, 42A; |Pulse Electronics PA4343.451NLT RoHS : Compliant |
| 290 | ||
| 1834343 | Phoenix Contact | Cable Housing, 2Pos, 3.81Mm, Green; |Phoenix Contact 1834343 RoHS : Compliant |
| 54 | ||
| CY8CPROTO-062S3-4343W | Infineon Technologies AG | Prototyping Kit, Arm, Bluetooth And Wifi; |Infineon Technologies CY8CPROTO-062S3-4343W RoHS : Compliant |
| 12 | ||
| 74434301008220 | Wurth Elektronik | Inductor, 22Uh, Shielded, 2A; |Würth Elektronik 74434301008220 RoHS : Compliant |
| 8 | ||
| 74434301008220 | Wurth Elektronik | Inductor, 22Uh, Shielded, 2A; |Würth Elektronik 74434301008220 RoHS : Compliant |
| 8 | ||
| CY8CKIT-064S0S2-4343W | Infineon Technologies AG | Dev Kit, Bluetooth And Wifi; |Infineon Technologies CY8CKIT-064S0S2-4343W RoHS : Compliant |
| 3 | ||
| 4343 | Visual Communications Company | Lens, Dome, Polycarbonate, Amber; Lens Type:Panel Mount; Beam Type:Narrow; Led Lens Color:Amber; Lens Diameter:0.39"; Lens Shape:Dome; Lens Material:Pc (Polycarbonate); Product Range:- Rohs Compliant: Yes |Vcc/visual Communications Company 4343 RoHS : Compliant |
| 0 | ||
| 4343 | Adafruit Industries | Adafruit Monster M4Sk - Diy Electronic Eyes Mask |Adafruit 4343 RoHS : Not Compliant |
| 0 | ||
| 4343 | Keystone Electronics Corp | Nut; |Keystone 4343 RoHS : Compliant |
| 0 | ||
![]() RS | S1A-434313SW | New Age Enclosures | SQUARE UTILITY WITH WALL MOUNT, WHITE |
| 26 | |
| S3A-434313S | New Age Enclosures | SQUARE UTILITY, BLACK |
| 25 | ||
| S3A-434313SW | New Age Enclosures | SQUARE UTILITY WITH WALL MOUNT, BLACK |
| 25 | ||
| 2084343 | RS Pro | FEMALE HEAVY DUTY POWER CONNECTOR INSERT 7 POSITION 10A 250V CRIMP |
| 6 | ||
| 45984-4343 | Molex | LPH RCPT ASSY RTAN 04 PWR 24 SIG SHORT RoHS : Compliant |
| 4 | ||
| 1954343 | RS Pro | AV ADAPTER MALE HDMI TO FEMALE DISPLAYPORT 150MM CABLE + AUDIO +POWER |
| 2 | ||
| IEGHF66-1REC4-34391-50-UV | Sensata Technologies | CIRCUIT BREAKER HYDMAG 2 PL 250VAC 50A AUX SW |
| 2 | ||
| BCC0EP7 (BCC M415-0000-1A-003-PX0434-300) | Balluff Inc | CONNECTOR/CABLE, FEMALE M12, PUR, 30.00 M |
| 2 | ||
| 104343 | Brady Worldwide Inc | 3" X 100 B514 RED FLOOR TAPE |
| 1 | ||
| 2243438 | RS Pro | ATG TISSUE TAPE HB 4807 WHITE FOAM TAPE 12MM X 33M, 0.15MM THICK |
| 1 | ||
| 4343 | Adafruit Industries | ADAFRUIT MONSTER M4SK - DIY ELECTRONIC EYES MASK |
| 0 | ||
| 4343 | Keystone Electronics Corp | NUT, BLIND CAPTIVE, PRESS-FIT, THREADED, 8-32, MOLDED NYLON, BRASS INSERT, .500 |
| 0 | ||
| 4343 | Visual Communications Company | PANEL MOUNT LENS FOR T1 LED AMBER RoHS : Compliant |
| 0 | ||
| 4343 | Greenlee Textron Inc | SEAL KIT REPAIR FOR 767 HYDRAULIC HAND PUMP, SERIAL CODE ABM,11 PIECES |
| 0 | ||
| 4343 | 80/20 Inc | COUNTERSINK "L" PIVOT ARM |
| 0 | ||
![]() Microchip Technology Inc | AC164343 | Microchip Technology Inc | MPLAB PM3 Socket Module for 64L QFN (9x9mm body size), Projected EOL: |
| 9 | |
![]() Rochester Electronics | IP4343CX5/LF,135 | NXP Semiconductors | Data Line Filter RoHS : Compliant |
| 4,500 | |
MJE4343G![]() | onsemi | Trans BJTs Single 160V 16A TO247 Tube RoHS : Compliant |
| 5,759 | ||
| CYW43438LKUBGT | Infineon Technologies AG | RF Transceiver (Board Mount) TxRx + MCU Bluetooth, WiFi 63-BGA T/R RoHS : Not Compliant |
| 11,147 | ||
| CYW43439KUBGT | Infineon Technologies AG | CYW43439 - WICED Wi-Fi/Bluetooth Combos RoHS : Compliant |
| 5,448 | ||
| CYW4343WKWBGT | Infineon Technologies AG | CYW4343WKWBGT - WICED Wi-Fi/Bluetooth Combos RoHS : Compliant |
| 2,373 | ||
OPA4343EA/250![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Compliant |
| 1,370 | ||
OPA4343EA/2K5![]() | Texas Instruments | Op Amp Standard 5.5MHz 16-SOP T/R RoHS : Compliant |
| 2,000 | ||
| ATOPA4343NA/2K5 | Texas Instruments | OP AMP, QUAD RAIL-TO-RAIL RoHS : Compliant |
| 7,500 | ||
OPA4343NA/250![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant |
| 16,791 | ||
| OPA4343EA | Burr-Brown Corp | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Not Compliant |
| 189 | ||
| OPA4343EA/250G4 | Burr-Brown Corp | Op Amp Standard 5.5MHz 16-SOP T/R RoHS : Compliant |
| 230 | ||
| OPA4343EA/2K5 | Burr-Brown Corp | Op Amp Standard 5.5MHz 16-SOP T/R RoHS : Compliant |
| 4,015 | ||
| OPA4343UA | Burr-Brown Corp | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant |
| 696 | ||
| CY7C64343-32LQXCKG | Cypress Semiconductor | Specific Microcontroller M8C USB Microcontroller |
| 466 | ||
| 1124343 | Qorvo | 2.4GHz Wi-Fi FCC edgeBoost BAW Filter RoHS : Compliant |
| 183,500 | ||
![]() Sager | 4343 | Keystone Electronics Corp | Screws & Fasteners BLIND CAPTIVE NUT |
| 0 | |
| 4343 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RFLS-47-0.250-PSA | 0 | |||
| 043433-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TXR40AC00-2012BI RoHS : Compliant | 0 | |||
| 1143432 | Phoenix Contact | DIN Rail Terminal Blocks UT 16 BN RoHS : Compliant |
| 0 | ||
| 11543435 | TE Connectivity | TE Connectivity | 0 | |||
| 0395434321 | Molex | Fixed Terminal Blocks 5.0MM EUROBLOCK PC 45 BLK 21CKT RoHS : Compliant |
| 0 | ||
| 614-43-432-31-007000 | Mill-Max Mfg Corp | IC & Component Sockets 32P DIP CARRIER SKT .146L LOW PROFILE RoHS : Compliant |
| 0 | ||
| ARC6-24-34.3-LU-LD-2-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| 70230-4343 | ARATAS Americas | Safety Light Curtains TYPE MS4800A-20-1040-10X-10R-RM2A SAFETY LIGHT CURTAIN | 0 | |||
| 126-43-432-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets 32P PLUGABLE WRAPOST TAIL SKT .425L RoHS : Compliant | 0 | |||
| 0434301015 | Molex | Molex | 0 | |||
| 0434301303 | Molex | Molex | 0 | |||
| 0434341002 | Molex | Molex | 0 | |||
| LELBXB1-1RS4-38434-30 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| LEL1-1RS4-28434-3601 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() Coilcraft Direct | Q4343-BL | Coilcraft Inc | Transformer, for NSC LM258x, RoHS RoHS : Compliant |
| 12 | |
![]() ComSIT USA | 434331013822 | Adolf Wuerth Gmbh & Co Kg | WS-TASU SMT TACT SWITCH Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.94N, Solder Terminal, Surface Mount-right Angle RoHS : Compliant | 3,400 | ||
| PA4343102ANLT | Pulse Electronics Corporation | IND FIXED Molded 1uH 29A 0.0018 OHM (Max) �20% T/R RoHS : Compliant | 490 | |||
![]() Interstate Connecting Components | M24643/43-08UO | MISC MIL-AERO | SHIPBOARD CABLE | 87 | ||
| 4343 | Keystone Electronics Corp |
| 23 | |||
| 000943430 | ITT Interconnect Solutions | VBN340A60PNT39VO | 0 | |||
| 440AS030N1434-3-B | Glenair Inc | 0 | ||||
| 440AS063N2434-3 | Glenair Inc | 0 | ||||
| 1-2176434-3 | TE Connectivity | CRGH0402 1% 430K 0.1W RoHS : Compliant |
| 0 | ||
| 5-2394343-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 440AS069Z11434-3 | Glenair Inc | BANDING BACKSHELL STRAIGHT | 0 | |||
| 3043434011 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCNTFR-7/8-0SPCS7029 | 0 | |||
| 06243433 | TE Connectivity | 06243433 RoHS : Compliant | 0 | |||
| 06243430 | TE Connectivity | 06243430 RoHS : Compliant | 0 | |||
| 8874343003 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A0111-24-2L RoHS : Compliant | 0 | |||
| 440AS030M1434-3B | Glenair Inc | RoHS : Compliant | 0 | |||
| 440DS001B1434-3 | Glenair Inc | 0 | ||||
| 440SS030M1434-3B | Glenair Inc | 0 | ||||
![]() PEI Genesis | 10-497643-435 | Amphenol Corporation | 10,240 | |||
![]() Powell Electronics | 3-644343-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 26,862 | |
| 2-204343-0 | TE Connectivity | Connectors |
| 26,400 | ||
| 043437-000 | TE Connectivity | Wire & Cable RoHS : Compliant |
| 5,118 | ||
| 2350434-3 | TE Connectivity | TE COMPONENT (REF 2350434-3) RoHS : Compliant |
| 1,426 | ||
| 3-640434-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,141 | ||
| 6643432-1 | TE Connectivity | Power Connectors RoHS : Compliant |
| 469 | ||
| ME1016843433701 | Amphenol Corporation | Connector |
| 315 | ||
| 31-4343 | Amphenol RF | RF Connector |
| 100 | ||
3043434002![]() | TE Connectivity | Connectors RoHS : Compliant |
| 66 | ||
| 776434-3 | TE Connectivity | TE COMPONENT (REF 776434-3) RoHS : Compliant |
| 50 | ||
| 322A434-3-0 | TE Connectivity | Connectors RoHS : Compliant |
| 17 | ||
| 43430001 | Hartmann Electronic | AERO RELAY/CONTACTOR 43430001 |
| 4 | ||
| 043433-000 | TE Connectivity | connector accessories RoHS : Compliant |
| 3 | ||
| 43433001 | Hartmann Electronic | AERO RELAY/CONTACTOR 43433001 |
| 3 | ||
| 322A434-3-0-CS5425 | TE Connectivity | MOLDED BOOT 322A434-3-0-CS5425 |
| 1 | ||
![]() PUI | 12.94343 | 1,310 | ||||
![]() Chip 1 Exchange | 8043433030- | Lelon Electronics Corp | INSTOCK | 12,000 | ||
| 12.94343 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 1,310 | |||
| ICS-43432 | INVEN | INSTOCK | 987 | |||
| 1834343 | INSTOCK | 974 | ||||
| 15434314 | INSTOCK | 2 | ||||
| PTL-43-439-RD | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1834343 | Phoenix Contact | KGGMC 15 2 KGGMC152 (Alt: 1834343) RoHS : Compliant | 20 | ||
| 1434392 | Phoenix Contact | PTSA 15 335Z MCRDGYBU PTSA15335ZMCRDGYBU (Alt: 1434392) RoHS : Compliant | 0 | |||
| 532434-3 | TE Connectivity | (Alt: 532434-3) RoHS : Not Compliant | 0 | |||
| 1544343-1 | TE Connectivity | Conn Housing 1 Crimp Cable Mount (Alt: 1544343-1) RoHS : Compliant | 0 | |||
| 6643436-1 | TE Connectivity | (Alt: 6643436-1) RoHS : Compliant | 0 | |||
| 6643438-1 | TE Connectivity | (Alt: 6643438-1) RoHS : Compliant | 0 | |||
| 6434357-5 | TE Connectivity | AMP64343575 (Alt: 6434357-5) RoHS : Compliant | 0 | |||
| 1243436001 | TE Connectivity | (Alt: 1243436001) RoHS : Compliant | 0 | |||
| 1243436001 | TE Connectivity | (Alt: 1243436001) RoHS : Compliant | 0 | |||
| 043433-000 | TE Connectivity | (Alt: 043433-000) RoHS : Compliant | 0 | |||
| 5-2394343-1 | TE Connectivity | (Alt: 5-2394343-1) RoHS : Compliant | 0 | |||
| S42C043432JP | CTS Corporation | Fixed Network Resistor 43 kohm Isolated 2 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: S42C043432JP) RoHS : Compliant | 0 | |||
| PA4343.103NLT | Pulse Electronics Corporation | Ind Power ShieldedMolded 10uH 20 100kHz 10A 14 X 128 X 65mm TR - Tape and Reel (Alt: PA4343.103NLT) RoHS : Compliant | 0 | |||
| PA4343.473NLT | Pulse Electronics Corporation | Power Inductor SMD 47 H 65 A Shielded 95 A PA4343XXXNLT Series - Tape and Reel (Alt: PA4343.473NLT) RoHS : Compliant | 0 | |||
| PM4343.223NLT | Pulse Electronics Corporation | Inductor Molded PowerShielded 22uH 20 100KHz 9A TR - Tape and Reel (Alt: PM4343.223NLT) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PA4343.223ANLT | Pulse Electronics Corporation | (Alt: PA4343.223ANLT) RoHS : Compliant | 5,000 | ||
| PA4343.301NLT | Pulse Electronics Corporation | (Alt: PA4343.301NLT) RoHS : Compliant |
| 2,000 | ||
| PA4343.222NLT | Pulse Electronics Corporation | (Alt: PA4343.222NLT) RoHS : Compliant |
| 1,000 | ||
| PA4343.103NLT | Pulse Electronics Corporation | Ind Power Shielded/Molded 10uH 20% 100kHz 10A (14 X 12.8 X 6.5mm) T/R (Alt: PA4343.103NLT) RoHS : Compliant | 0 | |||
| PM4343.223NLT | Pulse Electronics Corporation | (Alt: PM4343.223NLT) RoHS : Compliant | 0 | |||
| PA4343.562ANLT | Pulse Electronics Corporation | (Alt: PA4343.562ANLT) RoHS : Compliant | 0 | |||
| PM4343.222NLT | Pulse Electronics Corporation | (Alt: PM4343.222NLT) RoHS : Compliant | 0 | |||
| PM4343.473NLT | Pulse Electronics Corporation | (Alt: PM4343.473NLT) RoHS : Compliant | 0 | |||
| 643430-1 | TE Connectivity | (Alt: 643430-1) RoHS : Compliant | 0 | |||
| SLG4L43432V | Renesas Electronics Corporation | GPAK MIXED SIGNAL MATRIX,ASKEY (Alt: SLG4L43432V) RoHS : Compliant | 0 | |||
| 374343-E | TE Connectivity | Protective Cap for M12 Female Circular Connectors Polyethylene Yellow (Alt: 374343-E) RoHS : Compliant | 0 | |||
| PA4343.153NLT | Pulse Electronics Corporation | (Alt: PA4343.153NLT) RoHS : Compliant | 0 | |||
| PA4343.822ANLT | Pulse Electronics Corporation | (Alt: PA4343.822ANLT) RoHS : Compliant | 0 | |||
| PA4343.223NLT | Pulse Electronics Corporation | (Alt: PA4343.223NLT) RoHS : Compliant | 0 | |||
| PA4343.472NLT | Pulse Electronics Corporation | (Alt: PA4343.472NLT) RoHS : Compliant | 0 | |||
![]() Avnet Silica | B39262B4343P810 | Qualcomm RFFE Filter Products | SAW Filters Band Pass 2575GHz to 2615GHz 5 Pins SMD (Alt: B39262B4343P810) RoHS : Compliant | 0 | ||
| ADD5043-433-2-GEVK | onsemi | AX5043 RF Transceiver DVK2 Evaluation Kit Addon Kit (Alt: ADD5043-433-2-GEVK) RoHS : Not Compliant | 0 | |||
| CLM1C-WKB-CX1X4343 | Cree, Inc. | (Alt: CLM1C-WKB-CX1X4343) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SIW917Y-RB4343A | Silicon Laboratories Inc | SiWG917Y SoC Radio Board for Module, Wi-Fi 6 2.4 GHz Bluetooth LE 5.4, 8MB Flash, RF-Pin |
| 0 | |
| SIW917Y-RB4343C | Silicon Laboratories Inc | 917 Wi-Fi 6 2.4 GHz Module (SoC) Radio Board, Bluetooth LE, 8MB Flash,Integrated Antenna, w/32KHz crystal |
| 0 | ||
![]() Component Electronics, Inc | 45984-4343 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | |
| PE-64343 | Pulse Electronics Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 4343 | Heyco | 0 | |||
| 34343 | Essentra Components | 0 | ||||
| M4343 | Heyco | RLTCG M25 GRAYW/M9137 NUT | 0 | |||
| 4343400-MT | PennEngineering (PEM) | 0 | ||||
| 1343438 | Essentra Components | RIBBED PIPE PLUGLDPE BLUE | 0 | |||
| 1343439 | Essentra Components | RIBBED PIPE PLUGLDPE BLUE | 0 | |||
| 20594343 | Essentra Components | 25X25MM1-3MMWT SQUARE INSERT G | 0 | |||
![]() EBV Elektronik | BCM43431KMLG | Broadcom Limited | (Alt: BCM43431KMLG) RoHS : Compliant | 0 | ||
| CYW43439KUBG | Infineon Technologies AG | WLBGA63 30 to 70 24 GHz singleband WLAN (Alt: SP005652997) RoHS : Compliant | 0 | |||
| CYW43438KUBGT | Infineon Technologies AG | SingleChip 24GHz IEEE 80211ac bgn MACBasebandRadio with Integrated Bluetooth 41 and FM Rece (Alt: SP005652985) RoHS : Compliant | 0 | |||
| CYW43439KUBGT | Infineon Technologies AG | Multiprotocol Module Bluetooth 50 LE52 EDR54 IEEE 80211bgn 24GHz to 25GHz (Alt: SP005653001) RoHS : Compliant | 0 | |||
| CYW4343WKUBGT | Infineon Technologies AG | (Alt: SP005653017) RoHS : Compliant | 0 | |||
| BCM43436PXKUBG | Broadcom Limited | 80211n WiFi Bluetooth 42 and FM Combo Chip (Alt: BCM43436PXKUBG) RoHS : Compliant | 0 | |||
| CD8069504343701S RG1W | Intel Corporation | (Alt: 999H4H) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CYW4343WKWBG | Cypress Semiconductor | Stock | 19,297 | ||
| CYW4343WKWBGT | Infineon Technologies AG | Stock, Ship Today |
| 15,000 | ||
| CYW4343WKUBGT | Infineon Technologies AG | Stock RoHS : Compliant | 15,000 | |||
| CYW4343W1KUBG | Infineon Technologies AG | Stock | 4,297 | |||
| CYW4343W1KUBGT | Infineon Technologies AG | Stock, Ship Today |
| 4,297 | ||
| BCM4343W1KUBG | Broadcom Limited | Stock | 4,297 | |||
| CYW4343WKUBG | Infineon Technologies AG | Stock | 4,297 | |||
MJE4343G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 39 | ||
![]() Master Electronics | PA4343.103NLT | Pulse Electronics Corporation | PA4343 SMT Molded Power Inductor Series up to 55A 6.5mm Max Height RoHS : Compliant |
| 3,000 | |
| PA4343.473NLT | Pulse Electronics Corporation | PA4343 SMT Molded Power Inductor Series up to 55A 6.5mm Max Height RoHS : Compliant |
| 3,000 | ||
| 132043-4343 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 7 Pin 5 A PLB Series | ITT Cannon PLB4G620J07 RoHS : Compliant |
| 0 | ||
| 1243436001 | TE Connectivity | CGPT-R-19-0 RoHS : Compliant |
| 0 | ||
| 132043-4332 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 5 Pin 7 A PLB Series | ITT Cannon PLB4G220J05 RoHS : Compliant |
| 0 | ||
| 132043-4369 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 10 Pin 3 A PLB Series | ITT Cannon PLB4G520J10 RoHS : Compliant |
| 0 | ||
| 043433-000 | TE Connectivity | TXR40AC00-2012BI RoHS : Compliant |
| 0 | ||
| 1143432 | Phoenix Contact | DIN Rail Terminal Blocks UT 16 BN RoHS : Compliant |
| 0 | ||
| 444343-1 | TE Connectivity | HEADER 5P JPT TAB A RoHS : Compliant |
| 0 | ||
| 7100243430 | 3M Interconnect | .050 RIBBON CABLE SOCKET RoHS : Compliant |
| 0 | ||
| PM4343.223NLT | Pulse Electronics Corporation | PA4343 SMT Molded Power Inductor Series up to 55A 6.5mm Max Height RoHS : Compliant |
| 0 | ||
| ARC6-24-34.3-LU-LD-2-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 132043-4311 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 14 Pin 2 A PLB Series | ITT Cannon PLB4G220H14 RoHS : Compliant |
| 0 | ||
| 132043-4348 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 7 Pin 5 A PLB Series | ITT Cannon PLB4G520J07 RoHS : Compliant |
| 0 | ||
| 132043-4393 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 3 Pin 10 A PLB Series | ITT Cannon PLB4G020C03 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 15544343 | Aptiv PLC | Connectors 31 way Male HES Circular Series Black CONN |
| 50 | |
| 2434390000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AFS,4 2C 100-250V BK RoHS : Compliant |
| 50 | ||
| 2434340000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AMC 2.5 RoHS : Compliant |
| 50 | ||
| 2434370000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Interface Modules AMC 2.5 800V RoHS : Compliant |
| 11 | ||
| 21343435445100 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 10m |
| 10 | ||
| 21343435445010 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 1,0m |
| 10 | ||
| 2943437 | Phoenix Contact | Terminal Block Interface Modules EMG 12-TR/INV RoHS : Compliant |
| 3 | ||
| 1834343 | Phoenix Contact | Cable Housing, 3.81mm 2 Position, KGG-MC 1,5/ 2 RoHS : Compliant |
| 0 | ||
| 21343435445050 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 5,0m RoHS : Unknown |
| 0 | ||
| 21343435445015 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 1,5m |
| 0 | ||
![]() Pasternack Enterprises US | PE3W14343 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1,231 | ||
| PE3W14343-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-12 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-12 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 737 | ||
| PE3W14343-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-36 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-36 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 245 | ||
| PE3W14343-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-60 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-60 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 147 | ||
| PE3W12434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W12434-36 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W12434-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 jack to NEX10 jack cable assembly PE3W12434-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3W14343-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-120 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-120 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-120 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 73 | ||
| PE3W14343-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-300 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-300 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 29 | ||
| PE3FCA434-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber SC UPC to ST UPC, OM3 Multimode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA434-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA434-30M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 23 | ||
| PE3W04343LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. MHV Female 4 Hole Flange to MHV Female 4 Hole Flange Cable Using RG58 Coax, LF Solder, RoHS. PE3W04343LF is a MHV female 4 hole flange to MHV female 4 hole flange cable using RG58 coax. This Pasternack MHV female 4 hole flange to MHV female 4 hole flange cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. Our female MHV 4 hole flange to female MHV 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04343LF MHV female 4 hole flange to MHV female 4 hole flange cable assembly is constructed with RG58 coax. | 0 | |||
| PE3M0434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Pin to MIL Size 12 Contact Socket Cable 36 Inch Length Using M17/113-RG316 Coax with Heat Shrink, LF Solder. The PE3M0434-36 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0434-36 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0434-36 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0434-36 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W14343LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-500-UF Coax, LF Solder. PE3W14343LF is a N male to N male cable using LMR-500-UF coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14343LF N male to N male cable assembly is constructed with LMR-500-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Limited Detent SMP Male Bulkhead to MMCX Plug Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly limited detent SMP male bulkhead to MMCX plug cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The limited detent SMP male bulkhead to MMCX plug cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP bulkhead cable connection on one end and a MMCX cable connection on the other. Our SMP to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W16434-36 can also be known as a SMP plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has a between series connection. Our bulkhead SMP male to MMCX plug cable has a maximum VSWR of 1.4:1. SMP plug to MMCX male cable assembly PE3W16434-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16434-36 can also be used in the other direction and will be a MMCX plug to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to MMCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4343 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-200-UF Coax. PE3C4343 is a SMA male to SMA male right angle cable using LMR-200-UF coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4343 SMA male to SMA male right angle cable assembly is constructed with LMR-200-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04343 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. MHV Female 4 Hole Flange to MHV Female 4 Hole Flange Cable Using RG58 Coax. PE3W04343 is a MHV female 4 hole flange to MHV female 4 hole flange cable using RG58 coax. This Pasternack MHV female 4 hole flange to MHV female 4 hole flange cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. Our female MHV 4 hole flange to female MHV 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04343 MHV female 4 hole flange to MHV female 4 hole flange cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W24343 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female to MHV Male Cable Using RG223 Coax. PE3W24343 is a N female to MHV male cable using RG223 coax. This Pasternack N female to MHV male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MHV for connector 2. Our female N to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24343 N female to MHV male cable assembly is constructed with RG223 coax. | 0 | |||
![]() Vyrian | 2943437 | Phoenix Contact | Switches/Accessories RoHS : Compliant | 13,276 | ||
| AD9434-370EBZ | Analog Devices Inc | 9,875 | ||||
OPA4343UA/2K5G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 9,515 | |||
OPA4343NA/2K5G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 7,970 | |||
OPA4343EA/250G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Compliant | 6,374 | |||
OPA4343UAG4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 6,271 | |||
| OPA4343EA | Texas Instruments | 5,913 | ||||
| 1-1393434-3 | TE Connectivity | Connector Accessory | 5,827 | |||
| 1943438 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,227 | |||
| ADD5043-433-2-GEVK | onsemi | 5,108 | ||||
| 1704343 | Phoenix Contact | Strip Terminal Block, 14A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,474 | |||
OPA4343EA/2K5G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Compliant | 4,366 | |||
MJE4343G![]() | onsemi | Power Bipolar Transistor, 16A I(C), 160V V(BR)CEO, 1-Element, NPN, Silicon, TO-247, Plastic/Epoxy, 3 Pin RoHS : Compliant | 3,929 | |||
OPA4343NA/250G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 3,510 | |||
| 132043-4371 | ITT Interconnect Solutions | Circular Connector, 14 Contact(s), Female, Solder Terminal, Receptacle | 748 | |||
![]() Win Source Electronics | CYW43438KUBGT | Cypress Semiconductor | IC RF TXRX+MCU BLUETOOTH 63UFBGA / IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.0 2.4GHz 63-UFBGA, WLBGA |
| 90,000 | |
| ICS-43434 | TDK Invensense | MIC MEMS MULTI-MODE OMNI -26DB / Multi-Mode Microphone with I2S Digital Output |
| 22,682 | ||
ICS-43432![]() | TDK Invensense | MIC MEMS DIGITAL I2S OMNI -26DB / Low‐Noise Microphone with I2S Digital Output RoHS : Compliant |
| 7,520 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |