| Electronic Components Datasheet Search |
|
4815L-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | SK481-50-SA | Fischer Elektronik GmbH & Co KG | Heatsink: extruded; black; L: 50mm; W: 30mm; H: 45mm; aluminium |
| 1,157 | |
| 3304815 | Bossard Group | Screw; for plastic; 3x12; Head: cheese head; Torx® PLUS; 10IP; zinc |
| 1,000 | ||
| 53048-1510 | Molex | Connector: wire-board; socket; male; data; PicoBlade™; PIN: 15; 1A RoHS : Compliant |
| 118 | ||
| 4815 | Keystone Electronics Corp | Screwed spacer sleeve; hexagonal; polyamide; UNC6-32; UNC6-32 |
| 0 | ||
| 1548150000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; A; 24A; 800V; push-in; wemid; L: 50.5mm; TS35 RoHS : Compliant |
| 0 | ||
| 10054815 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 18; THR,THT; 3A |
| 0 | ||
| 3DAW4_4815D6 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 3W; Uin: 18÷75VDC; Uout: 15VDC; Uout2: -15VDC; THT |
| 0 | ||
| AM50E-4815SZ-K | Aimtec | Converter: DC/DC; 50W; Uin: 36÷75VDC; Uout: 15VDC; Iout: 3333mA; THT RoHS : Compliant |
| 0 | ||
| RP30-4815SEW | RECOM Power GmbH | Converter: DC/DC; 30W; Uin: 18÷75VDC; Uout: 15VDC; Iout: 2A; THT RoHS : Compliant |
| 0 | ||
| CCG10-48-15DR | TDK-Lambda Corporation | Converter: DC/DC; 10.2W; Uin: 18÷76VDC; Uout2: -15VDC; Iout: 340mA |
| 0 | ||
| KL-148/150/SW | Seifert Electronic GmbH & Co Kg | Heatsink: extruded; grilled; black; L: 150mm; W: 160mm; H: 40mm |
| 0 | ||
| REC10K-4815DAW/H2 | RECOM Power GmbH | Converter: DC/DC; 10W; Uin: 18÷75VDC; Uout: 15VDC; Uout2: -15VDC RoHS : Compliant |
| 0 | ||
| REC3-4815DRWZ/H2/A | RECOM Power GmbH | Converter: DC/DC; 3W; Uin: 36÷72VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
| REC8E-4815D/CTRL/X1 | RECOM Power GmbH | Converter: DC/DC; 8W; Uin: 20÷60VDC; Uout: 15VDC; Uout2: -15VDC; THT RoHS : Compliant |
| 0 | ||
| 09 3481 57 08 | Binder UK Ltd | Connector: M12; industrial |
| 0 | ||
![]() Avnet Americas | SRU1048-150Y | Bourns Inc | - Tape and Reel (Alt: SRU1048-150Y) RoHS : Compliant |
| 4,200 | |
LPC2102FBD48,151![]() | NXP Semiconductors | - Trays (Alt: LPC2102FBD48,151) RoHS : Compliant |
| 1,900 | ||
| 294815-E | TE Connectivity | - Trays (Alt: 294815-E) RoHS : Not Compliant |
| 84 | ||
| CCG10-48-15DR | TDK Corporation | - Bulk (Alt: CCG10-48-15DR) RoHS : Not Compliant |
| 20 | ||
| CCG10-48-15SR | TDK Corporation | - Bulk (Alt: CCG10-48-15SR) RoHS : Not Compliant |
| 20 | ||
| CCG10-48-15SF | TDK Corporation | - Bulk (Alt: CCG10-48-15SF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15DR | TDK Corporation | - Bulk (Alt: CCG6-48-15DR) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15SF | TDK Corporation | - Bulk (Alt: CCG6-48-15SF) RoHS : Not Compliant |
| 20 | ||
| CCG10-48-15DF | TDK Corporation | - Bulk (Alt: CCG10-48-15DF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15DF | TDK Corporation | - Bulk (Alt: CCG6-48-15DF) RoHS : Not Compliant |
| 20 | ||
| CCG6-48-15SR | TDK Corporation | - Bulk (Alt: CCG6-48-15SR) RoHS : Not Compliant |
| 20 | ||
| AM30EW-4815DLPZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE & Industrial, DIP-6, Module, 4:1, 30 W, 2 Output, 15 V - Rail/Tube (Alt: AM30EW-4815DLPZ) RoHS : Compliant |
| 10 | ||
| AM40CW-4815SLPZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE & Industrial, DIP-6, Module, 4:1, 40 W, 1 Output - Rail/Tube (Alt: AM40CW-4815SLPZ) RoHS : Compliant |
| 5 | ||
| AM6CW-4815DEZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE & Industrial, 4:1, 6 W, 2 Outputs, Fixed, 15 V/-15 V - Rail/Tube (Alt: AM6CW-4815DEZ) RoHS : Compliant |
| 5 | ||
| AM10EW-4815SLPZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE, Industrial & Railway, DIP-6, Module, 4:1, 10 W - Rail/Tube (Alt: AM10EW-4815SLPZ) RoHS : Compliant |
| 5 | ||
![]() Newark | 53048-1510 | Molex | Connector, Header, 15Pos, 1Row, 1.25Mm; |Molex 53048-1510 (Alternate Part Number: 800753750227 RoHS : Compliant |
| 301 | |
| REC6K-4815SAW | RECOM Power GmbH | 6W Dc/Dc-Converter/Regulated Dc-Dc Converter/Isolated Output/4:1 Input |Recom Power REC6K-4815SAW RoHS : Not Compliant |
| 72 | ||
| FMCA2348-150CM | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2348-150CM RoHS : Not Compliant |
| 42 | ||
| 1776-C4815 | Caddock Electronics Inc | Res, Net, Volt Div, 10M/1.11M, 0.1%, Rdl; Resistance R1:10Mohm; Product Range:1776 Series; Resistance R2:1.11Mohm; No. Of Elements:5Elements; Network Circuit Type:Voltage Divider; Resistor Case/Package:Radial Leaded Rohs Compliant: Yes |Caddock 1776-C4815 RoHS : Compliant |
| 38 | ||
| CCG10-48-15SR | TDK-Lambda Corporation | Dc-Dc Converter, 15V, 0.7A; |Tdk-Lambda CCG10-48-15SR RoHS : Compliant |
| 20 | ||
| THL 3-4815WISM | Traco Power | Dc-Dc Converter, 24V, 0.125A; Power Supply Applications:Ite; Dc/Dc Converter Type:-; Input Ratio:4:1; Output Power Max:3W; No. Of Outputs:1 Output; Output Voltage - Output 1:24V; Output Current - Output 1:125Ma; Width:13.7Mm Rohs Compliant: Yes RoHS : Compliant |
| 10 | ||
| MGW154815 | Cosel USA Inc | Dc-Dc Converter, 15V/-15V, 0.5A; |Cosel MGW154815 RoHS : Compliant |
| 9 | ||
| FMCA2048-150CM | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2048-150CM RoHS : Not Compliant |
| 9 | ||
| MGFS1R54815 | Cosel USA Inc | Dc-Dc Converter, 15V, 0.1A; |Cosel MGFS1R54815 RoHS : Compliant |
| 7 | ||
| TMR 10-4815WI | Traco Power | Dc-Dc Converter, 24V, 0.416A; |Traco Power TMR 10-4815WI RoHS : Compliant |
| 7 | ||
| THN 10-4815WIR | Traco Power | Dc-Dc Converter, 24V, 0.42A; |Traco Power THN 10-4815WIR RoHS : Compliant |
| 7 | ||
| CCG10-48-15DR | TDK-Lambda Corporation | Dc-Dc Converter, 15V/-15V, 0.34A/-0.34A; |Tdk-Lambda CCG10-48-15DR RoHS : Compliant |
| 6 | ||
| MHFS34815 | Cosel USA Inc | Dc-Dc Converter, 15V, 0.2A; |Cosel MHFS34815 RoHS : Compliant |
| 5 | ||
| AM6GO-4815SNZ | Aimtec | Dc-Dc Converter, 15V, 0.4A; Power Supply Applications:Ite; Dc/Dc Converter Type:Open Frame; Input Ratio:-; Output Power Max:6W; No. Of Outputs:1 Output; Output Voltage - Output 1:15V; Output Current - Output 1:400Ma; Width:8.2Mm Rohs Compliant: Yes RoHS : Compliant |
| 5 | ||
| 4815 | Keystone Electronics Corp | Spacer/Standoff, Hex Nylon 6.4Mm X 9.5Mm; |Keystone 4815 RoHS : Compliant |
| 0 | ||
![]() RS | SSI-LXR4815SRD-150 | ITW Lumex | PANEL MOUNT INDICATOR RED LED 0.323" THREADED 1.8 VDC LEADS SSI SERIES RoHS : Compliant |
| 17,381 | |
| 4815 | Keystone Electronics Corp | STANDOFF, 1/4 HEX, M-F, THREADED 6.32, LENGTH .375, NYLON 6/6 |
| 6,981 | ||
| 794815-1 | TE Connectivity | CONN CAP HSG 2 POS UNIV MATE-N-LOK HI TEMP RoHS : Compliant |
| 3,273 | ||
| SSI-LXR4815ID | ITW Lumex | INDICATOR PANEL MOUNT LED MNT-SZ 0.323" SCREW RED 2V LEADS RoHS : Compliant |
| 2,742 | ||
| 120084-8152 | Woodhead Molex | REC U12 5P AC MA M16 FM WIR UNSH 0.3M |
| 500 | ||
| 548158 | RS Pro | REPLACEMENT CABLE STRIPPER BLADE FOR USE WITH WIRE STRIPPERS |
| 20 | ||
| DIB02CD48150MV | Carlo Gavazzi Holding AG | MONITORING RELAY, CURRENT, TRMS AC/DC OVER OR UNDER CURRENT, SPDT, DIB SERIES |
| 8 | ||
| RPC4815 | Crydom Inc | PROPORTIONAL CONTROL SSR, PANEL MOUNT, 480VAC/15A, POTENTIOMETER CONTROL RoHS : Compliant |
| 7 | ||
| 2454815 (25534015) (SFIA0620250-025RS) | RS Pro | SCREW, 5/8-18 X 2 1/2 SOCKET HEAD CAP, PLAIN FINISH |
| 5 | ||
| MGW154815 | Cosel USA Inc | DC-DC CONVERTER,15V,0.5A,-15,0.5A,36-76V IN, ENCAPSULATED, THRU HOLE, MG SERIES RoHS : Compliant |
| 4 | ||
| 5481 (55996-9) | Klein Tools Inc | TOOL POUCH, LEATHER POCKET TOOL ORGANIZER, 6-POCKETS, 5.75X2.5X10-INCH |
| 3 | ||
| DFS20A-A2BAC000500 (1094815) | SICK AG | INCREMENTAL ENCODER, 2" FLANGE, 3/8" SOL SHAFT, 500 PPR, HTL |
| 3 | ||
| 120094-8155 | Woodhead Molex | CABLE ASSEMBLIES, 5000 MM LENGTH, M23X1, 19 POLE, FEMALE, BLACK, TPU, 600V |
| 2 | ||
| PIB02CD48150MV | Carlo Gavazzi Holding AG | MONITORING RELAY SPDT SINGLE PHASE CURRENT MONITOR 24-48 VAC/VDC PIB02 SERIES |
| 1 | ||
| 4815 | Exair LLC | CABINET COOLER SYSTEM, WITH THERMOSTAT CONTROL, 1000 BTU/HR., NEMA 4 |
| 0 | ||
![]() Bisco Industries | 572-4815-01-05-16 | Cambion Electronics Ltd | RoHS : Not Compliant | 3,052 | ||
| 5624-81-5 | Seastrom Mfg | 2,319 | ||||
| 4815 | Keystone Electronics Corp | 254 | ||||
| AT-48 (150 QTY A BOX) | MISCELLANEOUS | 100 | ||||
| SS1-LXR4815SUGD15B | ITW Lumex | 97 | ||||
| MS124815 | MS Inserts | 85 | ||||
| SS1-LXR4815SYD-150 | ITW Lumex | 79 | ||||
| SS1-LXR4815SYSU3B6 | ITW Lumex | 72 | ||||
| MS51848-15 | MS Washers | 49 | ||||
| SS1-LXR4815SYD-150B | ITW Lumex | 40 | ||||
| SS1-LXR4815SUGD150 | ITW Lumex | 35 | ||||
| 0481.500VXL | Littelfuse Inc | RoHS : Compliant | 15 | |||
| SS1-LXR4815GD | ITW Lumex | 11 | ||||
| SS48152K1110 EQ | MISC. INDUSTRIAL HRD | 8 | ||||
| MS19060-4815 | MS Bearings/Bushings | 6 | ||||
![]() Rochester Electronics | LPC1345FBD48,151![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 72MHz, CMOS, PQFP48 RoHS : Compliant |
| 192 | |
SC16C652BIB48,151![]() | NXP Semiconductors | IC 2, DUART CH 32B IrDA 5Mbps 2.25V, 2.97V, 4.5V - 2.75V, 3.63V, 5.5V 48-QFP Tray RoHS : Compliant |
| 23 | ||
LPC1346FBD48,151![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 48kB (48k x 8) 72MHz 48-QFP Tray RoHS : Compliant |
| 400 | ||
LPC1343FBD48,151![]() | NXP Semiconductors | LPC1343 - 32-bit Microcontroller (MCU) based on ARM Cortex-M3 Core RoHS : Compliant |
| 17 | ||
LPC2102FBD48,151![]() | NXP Semiconductors | IC MCU ARM7TDMI-S 16Bit, 32Bit 1 Core FLASH 16kB (16k x 8) 70MHz 48-QFP Tray RoHS : Compliant |
| 245 | ||
LPC2103FBD48,151![]() | NXP Semiconductors | IC MCU ARM7TDMI-S 16Bit, 32Bit 1 Core FLASH 32kB (32k x 8) 70MHz 48-QFP Tray RoHS : Compliant |
| 1 | ||
| NTD4815NHT4G | onsemi | MOSFET N-Channel 30V 6.9A (Ta), 35A (Tc) TO-252-3 T/R RoHS : Compliant |
| 597,241 | ||
| STD4815NT4G | onsemi | MOSFET NFET 30V 35A 15MOHM RoHS : Compliant |
| 12,500 | ||
| NTD4815N-1G | onsemi | Power Field-Effect Transistor, 6.9A I(D), 30V, 0.025ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 910 | ||
| NTD4815N-35G | onsemi | MOSFET N-Channel 30V 6.9A (Ta), 35A (Tc) I-Pak Tube RoHS : Compliant |
| 66,975 | ||
| NTD4815NT4G | onsemi | MOSFET N-Channel 30V 6.9A (Ta), 35A (Tc) TO-252-3 T/R RoHS : Compliant |
| 13,300 | ||
| ML4815CP | Fairchild Semiconductor Corporation | Switching Controller, Current-mode, 2A, 2000kHz Switching Freq-Max, PDIP16 RoHS : Not Compliant |
| 1,500 | ||
ML4815CP![]() | RF Micro Devices Inc | Switching Controller, Current-mode, 2A, 2000kHz Switching Freq-Max, PDIP16 RoHS : Not Compliant |
| 878 | ||
| 2SC4815-T-AZ | Renesas Electronics Corporation | Trans BJTs Single 60V 5A 3-SIP RoHS : Compliant |
| 15,619 | ||
![]() Sager | 4815 | C&K Switches | Littelfuse | 0 | ||
| 4815 | Keystone Electronics Corp | Standoffs & Spacers NYLON HEX 6-32 3/8 |
| 0 | ||
| 209-2-1-62-4-8-15-H-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| RPM20-4815DFW | RECOM Power GmbH | Isolated DC/DC Converters - Chassis Mount 20W DC/DC 1.6kV REG 18-75Vin +/-15Vout RoHS : Compliant |
| 0 | ||
| RPMD20-4815DFW | RECOM Power GmbH | Isolated DC/DC Converters - DIN Rail Mount 20W DC/DC 1.6kV REG 18-75Vin +/-15Vout RoHS : Compliant |
| 0 | ||
| RPMD20-4815SFW/N | RECOM Power GmbH | Isolated DC/DC Converters - DIN Rail Mount 20W DC/DC 1.6kV REG 18-75Vin 15Vout Neg RoHS : Compliant |
| 0 | ||
| RPMD30-4815SE | RECOM Power GmbH | Isolated DC/DC Converters - DIN Rail Mount POWER MODULE Series RP30 (E ) RoHS : Compliant |
| 0 | ||
| RS-4815D/H2 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 2kV REG 2:1 36-72Vin +/-15Vout RoHS : Compliant |
| 0 | ||
| MGS154815 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 15W 15V 1A Through Hole RoHS : Compliant |
| 0 | ||
| MGFS804815 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 81W 18-76Vin 15V 5.4A PCB Mnt RoHS : Compliant |
| 0 | ||
| REC15-4815S/H3/M/X2 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 15W 36-75Vin 15Vout 1A RoHS : Compliant |
| 0 | ||
| REC3-4815DRW/H/B | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 3W DC/DC 1.6kV REG 2:1 36-72in +/-15out RoHS : Compliant |
| 0 | ||
| REC3-4815SRW/H6/A/M | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 3W DC/DC 6kV REG 2:1 36-72Vin 15Vout RoHS : Compliant |
| 0 | ||
| REC3-4815SRW/H6/C | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 3W DC/DC 6kV REG 2:1 36-72Vin 15Vout RoHS : Compliant |
| 0 | ||
| REC5-4815DRWZ/H6/A/SMD | RECOM Power GmbH | Isolated DC/DC Converters - SMD 5W DC/DC 6kV REG 4:1 18-72Vin +/-15Vout RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BU4815G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | |
![]() ComSIT USA | THL304815WI | Traco Power | AVAILABLE EU | 24 | ||
![]() ComSIT USA | ATMEGA4815AT1 | Atmel Corporation | 8-BIT MICROCONTROLLER WITH 8K BYTES IN-SYSTEM PROGRAMMABLE FLASH RISC Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 16MHz, CMOS, PQFP32 RoHS : Compliant | 1,145 | ||
| I4815421122101 | Vikay (Displays) | Electronic Component RoHS : Not Compliant | 399 | |||
| SC16C550BIB48151 | NXP Semiconductors | 5 V, 3.3 V AND 2.5 V UART WITH 16-BYTE FIFOS Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQFP48 RoHS : Compliant | 234 | |||
| 7481521 | TE Connectivity | AMPLIMITE TRANSITION CONNECTOR (RS-232 TO MODULAR JACK) Rectangular Connector Adapter, 25 Contacts(Side1), 6 Contacts(Side2), Panel Mount, Female-Female RoHS : Not Compliant | 86 | |||
| AM27C2048150PC | AMD | 2 MEGABIT (128 K X 16-BIT) CMOS EPROM OTP ROM, 128KX16, 150ns, CMOS, PDIP40 RoHS : Not Compliant | 11 | |||
![]() Interstate Connecting Components | 4815 | Keystone Electronics Corp | NYLON M/F HEX STANDOFF |
| 837 | |
| 319HL048-1517-12 | Glenair Inc | CONNECTOR ACCESSORY | 0 | |||
| 2481576-1 | TE Connectivity | SWIVEL FIXTURE | 0 | |||
| 319HL048-1513-6 | Glenair Inc | CONNECTOR ACCESSORY | 0 | |||
| 319HS048-1509-6 | Glenair Inc | SHRINK BOOT ADAPTERS | 0 | |||
| 5-1676481-5 | TE Connectivity | CPF 0603 1K1 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2404815-2 | TE Connectivity | 1X4 COMBO,MATE-AX,HDR ASSY, SEALED,COD B RoHS : Compliant |
| 0 | ||
| C10-754815-20-03 | Amphenol Industrial Operations | LPT SERIES MACHINE CONTACT SKT C10-754815-20-03 | 0 | |||
| 2481578-1 | TE Connectivity | GUIDE TUBE LONG INKJET D1.2 | 0 | |||
| 319HL048-1510-6 | Glenair Inc | CONNECTOR | 0 | |||
| 319HL048-1513-12 | Glenair Inc | 0 | ||||
| 319HS048-1506-6 | Glenair Inc | SHRINK BOOT ADAPTERS | 0 | |||
| 319HL048-1509-6 | Glenair Inc | 319HL048-1509-6 | 0 | |||
| 319HS048-1513-6 | Glenair Inc | SHRINK BOOT ADAPTERS | 0 | |||
| 000481500 | ITT Interconnect Solutions | CIR24TV | 0 | |||
![]() PEI Genesis | A52481-5 | ITT Interconnect Solutions |
| 646 | ||
| S1038-148-1.50-34 | SOURIAU-SUNBANK |
| 0 | |||
| 13048153-2 | SOURIAU-SUNBANK |
| 0 | |||
| G350248-15 | SOURIAU-SUNBANK |
| 0 | |||
| A3204815-002 | SOURIAU-SUNBANK |
| 0 | |||
| 44-815 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| A3204815-001 | SOURIAU-SUNBANK |
| 0 | |||
| S983-148-1.50-4 | SOURIAU-SUNBANK |
| 0 | |||
| S1073-248-1.50C | SOURIAU-SUNBANK |
| 0 | |||
| PEC-4.8/1.5 | HellermannTyton |
| 0 | |||
| S982-C248-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| 13048153 | SOURIAU-SUNBANK |
| 0 | |||
| 095-666-44815 | Amphenol RF |
| 0 | |||
| M85049/48-1-5F | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
![]() Chip 1 Exchange | 53048-1510 | Molex | INSTOCK RoHS : Compliant | 235,222 | ||
| 1393481-5 | TE Connectivity | INSTOCK RoHS : Compliant | 48,188 | |||
| BPPM00090748152X00 | YAGEO Corporation | INSTOCK RoHS : Compliant | 7,280 | |||
| 48153-0210 | Molex | INSTOCK RoHS : Compliant | 4,730 | |||
| 48153-0210 | INSTOCK | 4,600 | ||||
| 2414815 | Thomson Components-Mostek Corp | INSTOCK | 4,000 | |||
| 53048-1510 | INSTOCK | 2,039 | ||||
| 2-2354815-1 | TE Connectivity | INSTOCK | 1,996 | |||
| MGFW304815 | Cosel USA Inc | INSTOCK RoHS : Compliant | 1,865 | |||
| 48151-0210 | Molex | INSTOCK RoHS : Compliant | 1,259 | |||
| 48151-0210 | INSTOCK | 1,250 | ||||
| MSS1048-154KLC | Coilcraft Inc | INSTOCK RoHS : Compliant | 673 | |||
| 48150-0001 | Molex | INSTOCK | 300 | |||
| 1D49481-501 | INSTOCK | 14 | ||||
![]() Avnet Abacus | SRU1048-151Y | Bourns Inc | - Tape and Reel (Alt: SRU1048-151Y) RoHS : Compliant | 3,600 | ||
| 48150C | Murata Manufacturing Co Ltd | Inductor Coupled 15 uH 774 Milliohm 32 A 122mm x 122mm x 62mm (Alt: 48150C) RoHS : Compliant | 0 | |||
| 2404815-2 | TE Connectivity | (Alt: 2404815-2) RoHS : Compliant | 0 | |||
| NMH4815DC | Murata Manufacturing Co Ltd | CDTNMH4815DC (Alt: NMH4815DC) RoHS : Compliant | 0 | |||
| NDXD4815EC | Murata Manufacturing Co Ltd | Module DCDC 2OUT 15V15V 025A025A 75W 6Pin Tube (Alt: NDXD4815EC) RoHS : Compliant | 0 | |||
| 3448-152244 | 3M | (Alt: 7100248691) RoHS : Compliant | 0 | |||
AM1A-4815SZ![]() | Aimtec | Isolated Through Hole DCDC Converter Household ITE 21 1 W 1 Output Fixed 15 V 67 mA (Alt: AM1A-4815SZ) RoHS : Compliant | 0 | |||
| AM12T-4815DZ | Aimtec | Isolated Through Hole DCDC Converter Industrial ITE 21 12 W 2 Outputs Fixed 15 V 400 mA (Alt: AM12T-4815DZ) RoHS : Compliant | 0 | |||
| AM50E-4815SZ-K | Aimtec | (Alt: AM50E-4815SZ-K) RoHS : Compliant | 0 | |||
| AM10C-4815D-FZ | Aimtec | Module DCDC 2OUT 15V 033A 10W 6Pin DIP Tube (Alt: AM10C-4815D-FZ) RoHS : Compliant | 0 | |||
| AM15CW-4815STT | Aimtec | DCDC Converter (Alt: AM15CW-4815STT) RoHS : Compliant | 0 | |||
AM1D-4815DH40Z![]() | Aimtec | Module DCDC 2OUT 15V15V 0035A0035A 1W 5Pin SIP (Alt: AM1D-4815DH40Z) RoHS : Compliant | 0 | |||
| AM20CW-4815DEZ | Aimtec | AM20CWEZ DCDC Converter (Alt: AM20CW-4815DEZ) RoHS : Compliant | 0 | |||
AM5T-4815DH35Z![]() | Aimtec | Isolated Through Hole DCDC Converter Household ITE 21 5 W 2 Outputs Fixed 15 V 167 mA (Alt: AM5T-4815DH35Z) RoHS : Compliant | 0 | |||
| AM6TW-4815SH30LPZ | Aimtec | (Alt: AM6TW-4815SH30LPZ) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 248152030035868+ | KYOCERA Corporation | (Alt: 248152030035868+) RoHS : Compliant | 0 | ||
| GBCC248-1538A650C1AH | Greenconn Corp | Plug male 1.0mm 30-pin (1-6 14,16 25-30) SMD (Alt: GBCC248-1538A650C1AH) RoHS : Compliant | 0 | |||
| SLG4CE48159V | Renesas Electronics Corporation | (Alt: SLG4CE48159V) RoHS : Compliant | 0 | |||
| AM6CW-4815DEZ | Aimtec | Isolated Through Hole DC/DC Converter, ITE & Industrial, 4:1, 6 W, 2 Outputs, Fixed, 15 V/-15 V (Alt: AM6CW-4815DEZ) RoHS : Compliant | 0 | |||
| PA4548.152NLT | Pulse Electronics Corporation | (Alt: PA4548.152NLT) RoHS : Compliant | 0 | |||
| 148152030035868+ | KYOCERA Corporation | (Alt: 148152030035868+) RoHS : Compliant | 0 | |||
| PKU4815CPI | Flex Ltd | (Alt: PKU4815CPI) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LPC2101FBD48,151![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 8KB Flash 18V33V 48Pin LQFP Tray (Alt: LPC2101FBD48,151) RoHS : Compliant | 5,750 | ||
BU4815G-TR![]() | ROHM Semiconductor | Volt Supervisor Detect 09V to 48V 5Pin SSOP TR (Alt: BU4815G-TR) RoHS : Compliant | 0 | |||
LPC1342FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 16KB Flash 33V 48Pin LQFP Tray (Alt: LPC1342FBD48,151) RoHS : Compliant | 0 | |||
LPC1347FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 64KB Flash 25V33V 48Pin LQFP Tray (Alt: LPC1347FBD48,151) RoHS : Compliant | 0 | |||
LPC1345FBD48,151![]() | NXP Semiconductors | MCU 32bit LPC1300 ARM Cortex M3 RISC 32KB Flash 25V33V 48Pin LQFP Tray (Alt: LPC1345FBD48,151) RoHS : Compliant | 0 | |||
LPC1346FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC1300 Series Microcontrollers ARM CortexM3 32 bit 72 MHz 48 KB 48 Pins (Alt: LPC1346FBD48,151) RoHS : Compliant | 0 | |||
LPC1313FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC1300 Series Microcontrollers ARM CortexM3 32 bit 72 MHz 32 KB 48 Pins (Alt: LPC1313FBD48,151) RoHS : Compliant | 0 | |||
LPC1343FBD48,151![]() | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 72 MHz 32 KB 8 KB 48 Pins LQFP (Alt: LPC1343FBD48,151) RoHS : Compliant | 0 | |||
LPC2102FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMI 32 bit 70 MHz 16 KB 48 Pins (Alt: LPC2102FBD48,151) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AM50E-4815SZ-K | Aimtec | RoHS : Compliant |
| 0 | |
| AM12T-4815DZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM1A-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM20CW-4815DEZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM5T-4815DH35Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM10GH-4815DEZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM10TWM-4815DH50YZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM30CW-4815DZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM30EW-4815DZ-K![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM15C-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM15EW-4815DZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM5T-4815D-VZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM6G-4815SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM3G-4815DZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM5TW-4815S-RZ | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 2390-404-81503 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 5,000 | |
| 15-24-8154 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 490 | ||
| HEA-48-155100-2 | Hi-Tron Semiconductor Corp | IN STOCK SHIP TODAY |
| 61 | ||
| 748481-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 59 | ||
| SSI-LXR4815GD | LUMIX | IN STOCK SHIP TODAY |
| 50 | ||
| 448153-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 48 | ||
| 60-8263-3048-15 | Kyocera AVX Components | IN STOCK SHIP TODAY |
| 48 | ||
| D48151000A020G | Dee Van Enterprise (DVE) | IN STOCK SHIP TODAY |
| 28 | ||
| DDU-4-8150 | DATA DELAY D | IN STOCK SHIP TODAY |
| 17 | ||
| SSI-LXR4815IGW3 | ITW Lumex | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| 551-0004-815 | Dialight | IN STOCK SHIP TODAY |
| 5 | ||
| HEA-48-155100-1 | Hi-Tron Semiconductor Corp | IN STOCK SHIP TODAY |
| 2 | ||
| PAH75S48-15/V | TDK-Lambda Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 448153-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| 481509003CO | RDI USA | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 47-80-248-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| M4815 | Heyco | RSCG 750 GRAY | 0 | |||
| 14815 | Heyco | BRASS CGPHT M25-150 | 0 | |||
| 17M08DIN34815B | Essentra Components | FLAT WASHER, 8.4MM ID, M8 516 | 0 | |||
| 17M16DIN34815 | Essentra Components | FLAT WASHER, 17MM ID, M16 58 | 0 | |||
| E3-148-15 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 47-10-248-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| HSM4-8-15-3 | Essentra Components | StandoffThrd ML/MLWht15MM Spc Standoff Thrd ML/ML White | 0 | |||
| 34815 | Essentra Components | 0 | ||||
| RBF-4.8-15-12 | Essentra Components | RIVET,BARBED,BLK,.188 IN HOLE, | 0 | |||
| 17M20DIN34815 | Essentra Components | FLAT WASHER, 21MM ID, M20 SCRE | 0 | |||
| 17M12DIN34815B | Essentra Components | FLAT WASHER, 13MM ID, M12 12 | 0 | |||
| 17M08DIN34815 | Essentra Components | FLAT WASHER, 8.4MM ID, M8 516 | 0 | |||
| 17M04DIN34815B | Essentra Components | Black,Nylon,1000 PKG, 9MM OD | 0 | |||
| HSM4-8-15-1 | Essentra Components | StandoffThrd Fem/FemWht15MM Spc Standoff Thrd Fem/Fem White | 0 | |||
![]() EBV Elektronik | ACPL-P481-500E | Broadcom Limited | (Alt: ACPL-P481-500E) RoHS : Compliant | 0 | ||
| ACPL-W481-560E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 6Pin SO TR (Alt: ACPL-W481-560E) RoHS : Compliant | 0 | |||
LPC2101FBD48,151![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 8KB Flash 18V33V 48Pin LQFP Tray (Alt: LPC2101FBD48,151) RoHS : Compliant | 0 | |||
LPC2102FBD48,151![]() | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMI 32 bit 70 MHz 16 KB 48 Pins (Alt: LPC2102FBD48,151) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NTD4815N-35G | onsemi | Stock, Ship Today RoHS : Compliant |
| 49,425 | |
LPC1345FBD48,151![]() | NXP Semiconductors | Stock RoHS : Compliant | 14,000 | |||
SC16C652BIB48,151![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 5,427 | ||
SC16C652BIB48,157![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 3,977 | ||
![]() Master Electronics | 53048-1510 | Molex | Conn Shrouded Header HDR 15 POS 1.25mm Solder RA Thru-Hole PicoBlade™ Tray RoHS : Compliant |
| 0 | |
| 54815BE0416BS | Thomas & Betts | Copper Two-Hole Lug - Long Barrel - Bell Shaped End - Blind End - Wire size 3/0 AWG - 1/4 Inch Bolt Size - 1 Inch Hole Spacing - Tin Plated - Die Code 50 - Die Color Code Orange. RoHS : Compliant |
| 0 | ||
| CA2-P2-D4-815-322-MK | Carling Technologies | CA2P2D4815322MK RoHS : Compliant |
| 0 | ||
| CS2-P0-D4-815-612-M7 | Carling Technologies | CS2P0D4815612M7 RoHS : Compliant |
| 0 | ||
| HTSW-148-15-LM-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-148-15-T-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-148-153 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-05-G-D-248-158 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-05-05-LM-D-248-153-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-06-03-G-D-248-152 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-06-05-F-D-248-153-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-10-03-G-D-248-152-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-10-05-G-D-248-153 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-15-05-F-D-248-153-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-24-03-G-D-248-152 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA248-15M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC APC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA248-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA248-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 51 | |
| PE3FCA548-15M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC APC to LC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA548-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/APC to LC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA548-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 34 | ||
| PE4815 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: D-Sub, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Interface Type 1: RG180, Interface Type 2: RG195, Interface Type 3: PE-B150. D-Sub Plug Contact Solder Attachment for RG180, RG195, PE-B150. PE4815 D-Sub plug coaxial connector has an interface type of RG180, RG195, PE-B150 and a 50 Ohm impedance. Pasternack D-Sub plug connector uses shield/contact solder/solder as an attachment method. The Pasternack D-Sub plug coaxial connector has a PTFE dielectric type. The Pasternack D-Sub coaxial connector has a brass body with gold plating. This D-Sub plug coaxial RF connector is REACH compliant. This Pasternack plug D-Sub connector will ship the same day as purchased. Our D-Sub plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom D-Sub connector cable assemblies that will ship the same day as well. |
| 22 | ||
| PE348-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 59.055 inches. TNC Male to TNC Female Bulkhead Low Loss Test Cable 150 CM Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss test TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. This TNC to TNC cable is a male to female coax assembly, PE348-150CM, can also be known as a low loss test TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348-150CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348-150CM can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss test TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss test cable 150 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W04815LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to MCX Plug Right Angle Cable Using RG405 Coax with HeatShrink, LF Solder, RoHS. PE3W04815LF/HS is a MCX plug right angle to MCX plug right angle cable using RG405 coax. This Pasternack MCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. MCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to plug MCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04815LF/HS MCX plug right angle to MCX plug right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W00148-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. BNC Male to SHV Plug Cable 150 cm Length Using RG58 Coax., Radio frequency assembly BNC male to SHV plug cable 150 cm length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SHV plug cable 150 cm length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SHV cable connection on the other. Our BNC to SHV cable assemblies have a male gender on end 1 and plug on end 2. This BNC to SHV cable is a male to plug coax assembly, PE3W00148-150CM, can also be known as a BNC plug to SHV male cable assembly and will be shipped same-day as it is purchased. BNC plug to SHV male cable assembly PE3W00148-150CM is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency BNC male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00148-150CM can also be used in the other direction and will be SHV plug to BNC male cable assembly if the opposite connectivity is required. BNC plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SHV plug cable 150 cm length using RG58 coax. |
| 0 | ||
| PE3W05481-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Push-On SMP Female Right Angle to Reverse Polarity TNC Female Bulkhead Cable 50 cm Length Using LMR-100 Coax., Radio frequency assembly push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our right angle SMP to reverse polarity TNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to reverse polarity TNC cable is a female to female coax assembly, PE3W05481-50CM, can also be known as a right angle SMP jack to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to reverse polarity TNC jack cable assembly PE3W05481-50CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to reverse polarity TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05481-50CM can also be used in the other direction and will be reverse polarity TNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to TNC reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to reverse polarity TNC female bulkhead cable 50 cm length using LMR-100 coax. |
| 0 | ||
| PE3W24815 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to BNC Male Cable Using PE-SR405FLJ Coax. PE3W24815 is a SMA female bulkhead to BNC male cable using PE-SR405FLJ coax. This Pasternack SMA female bulkhead to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA bulkhead to male BNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W24815 SMA female bulkhead to BNC male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C4815 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Male to Straight Cut Lead Cable Using PE-P086HF Coax., Radio frequency assembly 2.92mm male to straight cut lead cable using PE-P086HF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to straight cut lead cable using PE-P086HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and straight cut lead cable connection on the other. Our 2.92mm to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This 2.92mm to straight cut lead cable is a male to sexless coax assembly, PE3C4815, can also be known as a 2.92mm plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to straight cut lead sexless cable assembly PE3C4815 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2.92mm male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4815 can also be used in the other direction and will be straight cut lead sexless to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to straight cut lead cable using PE-P086HF coax. | 0 | |||
| PE3C7848-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male Right Angle to N Female Bulkhead Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C7848-150CM, can also be known as a low PIM right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C7848-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7848-150CM can also be used in the other direction and will be N type female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C6348-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Fire Rated 4.3-10 Female to 4.3-10 Female Low PIM Cable 150 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-SPP250-4310F-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable is a female to female coax assembly, PE3C6348-150CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly PE3C6348-150CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-4310F-LP 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-4310F-LP 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to 4.3-10 female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts. |
| 0 | ||
| PE3W04815 | Pasternack Enterprises | 0 | ||||
| PE3C8248-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.3-10 Male to 7/16 DIN Male Right Angle Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a male to male coax assembly, PE3C8248-150CM, can also be known as a low PIM 4.3-10 plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C8248-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8248-150CM can also be used in the other direction and will be right angle 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 7/16 DIN male right angle low PIM cable 150 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3FCA481-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex ST UPC to ST UPC, SM OS2, 2.0mm Plenum, Yellow-5M. Pasternack’s PE3FCA481-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long simplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA481-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA481-5M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex ST/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3C5848-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 7/16 DIN Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a male to male coax assembly, PE3C5848-150CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 7/16 DIN plug cable assembly PE3C5848-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5848-150CM can also be used in the other direction and will be 7/16 DIN male to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
![]() Vyrian | REC5-4815DRWZ/H/B/SMD | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 2 Output, 5W, Hybrid RoHS : Compliant | 17,617 | ||
| RSO-4815D | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 2 Output, 1W, Hybrid RoHS : Compliant | 13,472 | |||
SC16C752BIB48,151![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQFP48 RoHS : Compliant | 12,100 | |||
| 1648156-1 | TE Connectivity | Rectangular Power Connector, 40 Contact(s), Female, Crimp Terminal, Receptacle RoHS : Compliant | 11,576 | |||
RP08-4815SA![]() | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 1 Output, 8W, Hybrid RoHS : Compliant | 10,523 | |||
| 1648157 | Phoenix Contact | Rectangular Connector RoHS : Compliant | 9,705 | |||
LPC1342FBD48,151![]() | NXP Semiconductors | Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 72MHz, CMOS, PQFP48 RoHS : Compliant | 8,274 | |||
SC16C2550IB48,151![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQFP48 RoHS : Compliant | 8,270 | |||
SC68C2550BIB48,151![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQFP48 RoHS : Compliant | 5,116 | |||
| CT148154 | Micron Technology, Inc | 4,633 | ||||
| NCS3S4815SC | Murata Manufacturing | DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid | 584 | |||
| URB4815LD-20WH | Mornsun Guangzhou Science & Technology | Analog Circuit | 530 | |||
| 0481.500HXM | Littelfuse Inc | Electric Fuse, Fast Blow, 0.5A, 125VAC, 125VDC, 40A (IR), Inline/holder RoHS : Compliant | 428 | |||
| LPC1549JBD48,151 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 72MHz, CMOS, PQFP48 | 382 | |||
| MSS7348-153MEC | Coilcraft Inc | General Purpose Inductor, 15uH, 20%, 1 Element, Ferrite-Core, SMD, 2828 RoHS : Compliant | 332 | |||
![]() Waytek, Inc. | 12048159 | Aptiv PLC | 20-18 GA Metri-Pack 280 Series Male 12048159 Terminal Reel 2200/Reel RoHS : Compliant |
| 24,200 | |
| 12048159-L | Aptiv PLC | 20-18 Ga Metri-Pack 280 Series Male 12048159 Loose Terminal LOOSE PIECE |
| 14,565 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |