 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
50480800ACNDMNTZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ComSIT USA | M95040MN3T | STMicroelectronics | 4 KBIT SERIAL SPI BUS EEPROM WITH HIGH SPEED CLOCK EEPROM, 512X8, Serial, CMOS, PDSO8 RoHS : Not Compliant | 290,545 | ||
| 3314J1504E | Bourns Inc | SQUARE TRIMPOT TRIMMING POTENTIOMETER Trimmer, Cermet, 0.25W, 500000ohm, 20% +/-Tol, 100ppm/Cel, 1 Turn(s), 2018 RoHS : Compliant | 5,779 | |||
| AT25040BSSPDT | Atmel Corporation | SPI SERIAL EEPROM EEPROM, 512X8, Serial, CMOS, PDSO8 RoHS : Compliant | 4,000 | |||
| MMBD1504A | onsemi | Rectifier Diode, 1 Phase, 2 Element, 0.2A, 200V V(RRM), Silicon RoHS : Compliant | 2,285 | |||
| MRS255000C7504FC100 | Vishay Intertechnologies | Fixed resistor, wirewound, 500 ohm, Vishay RoHS : Compliant | 1,000 | |||
| DF1504ST | Diodes Incorporated | 1.5A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Bridge Rectifier Diode, 1 Phase, 1.5A, 400V V(RRM), Silicon RoHS : Compliant | 695 | |||
| SST25VF040B504IS2AF | Silicon Storage Technology | 4-MBIT SPI SERIAL FLASH MEMORY Flash, 4MX1, PDSO8 RoHS : Compliant | 645 | |||
| ATF1504ASV15AU44 | Microchip Technology Inc | EE PLD, 15ns, PQFP44 RoHS : Not Compliant | 640 | |||
| SC504504MFN4R2 | Freescale Semiconductor | Electronic Component RoHS : Compliant | 500 | |||
| MB9BF504NBPMCGJNE2 | Fuji Electric Co Ltd | 32-BIT ARM CORTEX-M3 BASED MICROCONTROLLER RISC Microcontroller, CMOS RoHS : Compliant | 210 | |||
| PIC16C50504IP | mct | Microcontroller, MCT, 8-bit, DIP package RoHS : Compliant | 105 | |||
AD45048ARZ | Analog Devices Inc | RAIL-TO-RAIL UPSTREAM ADSL LINE DRIVER Line Driver, 2 Func, 2 Driver, BIPolar, PDSO8 RoHS : Compliant | 60 | |||
| T63XB504KT20 | Vishay Intertechnologies | 1/4 INCH MULTI-TURN FULLY SEALED CONTAINER CERMET TRIMMER Trimmer, Cermet, 0.25W, 500000ohm, 250V, 10% +/-Tol, 100ppm/Cel, 13 Turn(s), 2720 RoHS : Compliant | 50 | |||
| REF5040K | Texas Instruments | Electronic Component RoHS : Not Compliant | 25 | |||
| KAL01504BASYRS232 | keetouch | Electronic Component RoHS : Not Compliant | 9 | |||
 GLYN GmbH & Co. KG | HAL1504UA-A-2-A-2-39 | TDK Micronas GmbH | ASIL B ready Hall Switch Family, TO92UA-2, ammopac | 2,000 | ||
| ADA-FLEX-50MAX-50-40 | ES+S | Adapter for 2x FFC/FPC incl. Jumper cable 50pol. | 6 | |||
 PUI | 12.88504 | 18,623 | ||||
| KBPC3504W-G | Comchip Technology Corporation Ltd | RoHS : Compliant | 2,100 | |||
| 12.99504 | 1,294 | |||||
| 12.95043 | 1,000 | |||||
| 12.85046 | 706 | |||||
| 12.85047 | 706 | |||||
| GBU1504-G | 660 | |||||
| 12.95044 | 450 | |||||
| 12.95040 | 450 | |||||
| 12.85049 | 300 | |||||
| KBPC2504W-G | 200 | |||||
| 12.95046 | 180 | |||||
| MS25042-20D | Amphenol Corporation | 10 | ||||
| 12.87504 | 10 | |||||
| MS25042-28D | Amphenol Corporation | 5 | ||||
 Richardson RFPD | ATS-FPX045045030-71-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 6.7C/W Bl RoHS : Compliant |
| 0 | |
| K044504220HQ0J143 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| HVC0402T2504JET | Ohmite Mfg Co | Res Thick Film 0402 2.5M Ohm 5% 0.05W(1/20W) ±100p RoHS : Compliant |
| 0 | ||
| R412504124 | Radiall | Attenuator 3GHz RoHS : Compliant |
| 0 | ||
| QAS504K600D022 | Knowles CDE | QAS504K600D022 RoHS : Compliant |
| 0 | ||
| FPA250 47R J | Ohmite Mfg Co | Thick Film Power Resistors RoHS : Compliant |
| 0 | ||
| PPR1250-400-1000J | Spectrum Control | RF Resistor RoHS : Compliant | 0 | |||
| DCHB150-48S28T | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
ATS-CPX045045010-159-C3-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 10.8C/W B RoHS : Compliant |
| 0 | ||
| ATS-CPX045045010-197-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Screw Mount Aluminum 60 RoHS : Compliant |
| 0 | ||
ATS-CPX045045020-161-C3-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Aluminum 6063 4.8C/W Bl RoHS : Compliant |
| 0 | ||
ATS-FPX045045013-07-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Screw Mount Aluminum 60 RoHS : Compliant |
| 0 | ||
| ATS-FPX045045020-09-C3-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Cross-Cut Aluminum 6063 10.7C/W RoHS : Compliant |
| 0 | ||
| ATS045045010-SF-15I | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Straight Adhesive Aluminum 7 RoHS : Compliant |
| 0 | ||
| D10850-40 | Wakefield-Vette | Heat Sink Passive BGA Pin Array RoHS : Compliant | 0 | |||
 Chip 1 Exchange | 504050-0691 | Molex | INSTOCK | 224,640 | ||
| BWVC005050401R5M00 | YAGEO Corporation | INSTOCK RoHS : Compliant | 62,400 | |||
| 504195-0471 | Molex | INSTOCK | 59,280 | |||
| 504195-0470 | Molex | INSTOCK | 37,440 | |||
| FPI0504-100M | INSTOCK | 30,985 | ||||
| 929504-5 | TE Connectivity | INSTOCK RoHS : Compliant | 28,386 | |||
| D-SCE-2.5K-4.8-50-4 | TE Connectivity | INSTOCK RoHS : Compliant | 13,000 | |||
| K014504720HM0J143 | KEN | INSTOCK | 2,095 | |||
| 0950406886 / 95040-6886 | INSTOCK | 539 | ||||
| NHS50-4RJ | INSTOCK | 328 | ||||
| IXDF504SIA | INSTOCK | 72 | ||||
| LN65049-24L | INSTOCK | 43 | ||||
| M850493811W | INSTOCK | 10 | ||||
| FT6A-11,0592/16-30-50/48 | INSTOCK | 6 | ||||
| CU-5041 | Vishay Ohmtek | INSTOCK | 5 | |||
 EBV Elektronik | 13648-504-XTD | onsemi | AMI ASIC (Alt: 13648-504-XTD) RoHS : Compliant | 46,080 | ||
| LPC5504JHI48Y | NXP Semiconductors | LPC5504JHI48 (Alt: LPC5504JHI48Y) RoHS : Compliant | 16,000 | |||
| M95040-WMN6TP | STMicroelectronics | EEPROM 4 Kbit 512 x 8bit SPI 10 MHz SOIC 8 Pins (Alt: M95040-WMN6TP) RoHS : Compliant | 15,000 | |||
| MRS1504T3G | onsemi | Standard Recovery Diode 400 V 15 A Single 104 V 50 A (Alt: MRS1504T3G) RoHS : Compliant | 5,000 | |||
| STPS5045SG-TR | STMicroelectronics | Schottky Rectifier 45 V 50 A Single TO263 D2PAK 3 Pins 610 mV (Alt: STPS5045SG-TR) RoHS : Compliant | 2,000 | |||
| HCPL-4504-500E | Broadcom Limited | Optocoupler 1 Channel Surface Mount DIP 8 Pins 25 mA 375 kV 25 (Alt: HCPL-4504-500E) RoHS : Compliant | 2,000 | |||
MC14504BDG | onsemi | Hex Level Shifter ONSSPCLGCPV6S9A (Alt: MC14504BDG) RoHS : Compliant | 1,536 | |||
| LPC5504JBD64Y | NXP Semiconductors | Microcontroller ARM CortexM33 32bit 128KB Flash 18V to 36V 64Pin HTQFP (Alt: LPC5504JBD64Y) RoHS : Compliant | 1,500 | |||
ATF1504AS-10AU44 | Microchip Technology Inc | CPLD EEPROM 64 Macrocells 32 IOs TQFP 44 Pins 10 (Alt: ATF1504AS-10AU44) RoHS : Compliant | 1,280 | |||
ATF1504AS-10AU100 | Microchip Technology Inc | CPLD EEPROM 64 Macrocells 64 IOs TQFP 100 Pins 10 (Alt: ATF1504AS-10AU100) RoHS : Compliant | 540 | |||
| LPC5504JHI48E | NXP Semiconductors | ARM MCU 32bit ARM CortexM33 96 MHz 128 Kilobytes 80 Kilobytes 48 Pins HVQFN (Alt: LPC5504JHI48E) RoHS : Compliant | 260 | |||
| ATF1504ASV-15AU100 | Microchip Technology Inc | CPLD ATF1504ASV Family 15K Gates 64 Macro Cells 769MHz 33V 100Pin TQFP (Alt: ATF1504ASV-15AU100) RoHS : Compliant | 180 | |||
| LPC5504JBD64E | NXP Semiconductors | ARM MCU 32bit ARM CortexM33F 96 MHz 128 KB 80 KB 64 Pins HTQFP (Alt: LPC5504JBD64E) RoHS : Compliant | 160 | |||
| ATF1504ASV-15AU44 | Microchip Technology Inc | CPLD ATF1504ASV Family 15K Gates 64 Macro Cells 769MHz 33V 44Pin TQFP (Alt: ATF1504ASV-15AU44) RoHS : Compliant | 160 | |||
| CM8071504654307S RL6V | Intel Corporation | Intel Core i512500TE Processor 18M Cache up to 430 GHz FCLGA16A Tray (Alt: 99ARC5) RoHS : Compliant | 10 | |||
 ECCO | A850491811N03 | Amphenol PCD |
| 383 | ||
| A850495118N | Amphenol PCD |
| 64 | |||
| A85049717W | Amphenol PCD |
| 20 | |||
| M85049/17-10W02A | Amphenol PCD |
| 17 | |||
| A850497811W02 | Amphenol PCD |
| 16 | |||
| A8504910112N | Amphenol PCD |
| 15 | |||
| M85049/7-56W | Amphenol PCD |
| 15 | |||
| MS25043-22D | Amphenol PCD |
| 14 | |||
| M85049/7-24W | Amphenol PCD |
| 13 | |||
| M85049/1813W03A | Amphenol PCD |
| 8 | |||
| A85049811W | Amphenol PCD |
| 6 | |||
| A850491811W03 | Amphenol PCD |
| 6 | |||
| A8504949212W | Amphenol PCD |
| 3 | |||
| A85049841W | Amphenol PCD |
| 1 | |||
| M85049/8-41W | Amphenol PCD |
| 1 | |||
 Flip Electronics | NB3L8504SDTG | onsemi | Stock RoHS : Compliant | 84,000 | ||
| MMBD1504A | onsemi | Stock, Ship Today RoHS : Compliant | 43,602 | |||
| CAV25040VE-GT3 | onsemi | Stock, Ship Today RoHS : Compliant | 33,000 | |||
| FM25040B-G | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 31,047 | |||
| NLV14504BDG | onsemi | Stock, Ship Today RoHS : Compliant | 14,400 | |||
| L150-40805030000S0 | Lumileds | Stock, Ship Today RoHS : Compliant | 12,000 | |||
| L150-4090502400000 | Lumileds | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| CY2CP1504ZXI | Infineon Technologies AG | Stock, Ship Today | 5,570 | |||
| ESS020W-0450-42 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant | 3,220 | |||
CAT25040YI-GT3 | onsemi | Stock, Ship Today RoHS : Compliant | 3,176 | |||
MC14504BDTR2G | onsemi | Stock, Ship Today RoHS : Compliant | 2,500 | |||
| ESM050W-1050-42-Z1 | Energy Recovery Products | Stock, Ship Today | 1,500 | |||
| FSB50450S | onsemi | Stock, Ship Today RoHS : Compliant | 408 | |||
| HCPL-4504-320E | Broadcom Limited | Stock, Ship Today RoHS : Compliant | 250 | |||
| ESM020W-0350-42 | Energy Recovery Products | Stock, Ship Today | 11 | |||
 Pasternack Enterprises US | PE3950-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 48 inches. MHV Male to SHV Plug Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly MHV male to SHV plug cable 48 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 48 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE3950-48, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE3950-48 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3950-48 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 48 inch length using RG58 coax. |
| 3,866 | |
| PE3W13504-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504-60 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504-60 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 60 inch length using LMR-200 coax. |
| 133 | ||
| TC-250-4310MS-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL, Interface Type 2: SPF-250, Interface Type 3: SPO-250, Interface Type 4: 1/4" Superflexible, Interface Type 5: PE-1/4SFHC. 4.3-10 Male Low PIM Snap-On Connector Solder Attachment for SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC. TC-250-4310MS-LP 4.3-10 male coaxial snap-on connector has an interface type of 4.3-10 male SPP-250-LLPL, SPF-250, SPO-250, 1/4" Superflexible, PE-1/4SFHC and a 50 Ohm impedance. Pasternack 4.3-10 male connector uses shield/contact solder/solder as an attachment method. Our male 4.3-10 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 4.3-10 male coaxial snap-on connector has a PTFE dielectric type and a VSWR of 1.25. The Pasternack 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TC-250-4310MS-LP 4.3-10 connector uses brass contact. This 4.3-10 male coaxial snap-on RF connector is RoHS and REACH compliant. This Pasternack male 4.3-10 connector will ship the same day as purchased. Our 4.3-10 male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 4.3-10 connector cable assemblies that will ship the same day as well. |
| 74 | ||
| PE45047 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Interface Type 1: LMR-200, Interface Type 2: PE-C200. N Female Bulkhead Mount Connector Crimp/Solder Attachment for LMR-200, PE-C200, IP67 Rated. PE45047 type N female bulkhead coaxial connector has an interface type of LMR-200, PE-C200 and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact crimp/solder as an attachment method. Our female type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack N type female bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2. Our PE45047 N type connector uses copper contact and a tri-metal plating material. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave. |
| 42 | ||
| PE3C6504-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 7/16 DIN Female to 7/16 DIN Female Low PIM Cable 24 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716F-LP 7/16 DIN cable connection on one end and TC-SPP375-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable is a female to female coax assembly, PE3C6504-24, can also be known as a low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly PE3C6504-24 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716F-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716F-LP 7/16 DIN female to TC-SPP375-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716F-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 24 inch length using SPO-375 coax using Times Microwave parts. |
| 28 | ||
| PE3MSA00450-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Bulkhead Insulated Jack to Jack for 78 Ohm M17/176-00002, 48" Cable., Radio frequency assembly lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00450-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00450-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female bulkhead to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB bulkhead insulated jack to jack for 78 Ohm M17/176-00002, 48" cable. |
| 2 | ||
| PE3C5504-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-36 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-36 RF cable are available on our downloadable PDF datasheet.PE3C5504-36 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W23504 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Female Cable Using RG141 Coax. PE3W23504 is a N male to 7/16 DIN female cable using RG141 coax. This Pasternack N male to 7/16 DIN female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male N to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23504 N male to 7/16 DIN female cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W25043 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to SMB Plug Right Angle Cable Using RG405 Coax. PE3W25043 is a BNC female bulkhead to SMB plug right angle cable using RG405 coax. This Pasternack BNC female bulkhead to SMB plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMB for connector 2. BNC to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to plug SMB right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25043 BNC female bulkhead to SMB plug right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C5504-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-18 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-18 RF cable are available on our downloadable PDF datasheet.PE3C5504-18 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05047/WH/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB Positive Snap, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: Mini SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Positive Snap Plug to 75 Ohm Mini SMB Plug Right Angle Cable Using 75 Ohm RG187 Coax with HeatShrink, LF Solder., Pasternack’s PE3W05047/WH/HS SMB positive snap plug to right angle mini SMB plug RF cable assembly using RG187 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB positive snap plug to mini SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB positive snap to mini SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB positive snap cable connection on one end and a right angle mini SMB cable connection on the other. Our SMB positive snap to mini SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3W05047/WH/HS can also be known as a SMB positive snap male to right angle mini SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W05047/WH/HS RF cable has a ptfe jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W05047/WH/HS SMB positive snap male to mini SMB male cable assembly is built with RG187, which is a flexible coax type. The Pasternack flexible SMB positive snap cable assembly is manufactured with SMB positive snap to right angle mini SMB cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05047/WH/HS can also be used in the other direction and will be a right angle mini SMB plug to SMB positive snap plug cable assembly if the opposite connectivity is required. This SMB positive snap male to mini SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB positive snap to mini SMB cable assembly for quick shipment worldwide. Variations of SMB positive snap and mini SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB positive snap to mini SMB RF cable assembly as per your requirements. | 0 | |||
| PE3W05504 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug to SMA Male Cable Using LMR-100 Coax. PE3W05504 is a MMBX plug to SMA male cable using LMR-100A coax. This Pasternack MMBX plug to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMBX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05504 MMBX plug to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE45043 | Pasternack Enterprises |
| 0 | |||
| PE34504-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Male to BNC Male Cable 36 Inch Length Using RG8 Coax., Radio frequency assembly TNC male to BNC male cable 36 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 36 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE34504-36, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE34504-36 is built with RG8 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34504-36 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 36 inch length using RG8 coax. |
| 0 | ||
| PE3C10504 | Pasternack Enterprises | 0 | ||||
 Teledyne HiRel | 5962-89755043A | Teledyne HiRel | PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR RoHS : Not Compliant | 0 | ||
5962-9071504MXA | Teledyne HiRel | FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9154504MQA | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
5962-9158504MUA | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873504LA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
M38510/31504B2A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS RoHS : Not Compliant | 0 | |||
| 5962-8751504KA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8680504QA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9158504MYA | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8680504XA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88735043C | Teledyne HiRel | PROM OTP 2K X 8 REGISTERED 25 NS | 0 | |||
5962-9071504MYA | Teledyne HiRel | FIFO MEMORY, 4K X 9, 50 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8873504KA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8751504JA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9154504MYA | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C0805X7R250-472KNP | VENKEL LTD | Chip Capacitor;0805;X7R;25V;4700pF;�10% RoHS : Compliant | 94,000 | ||
| C0805C0G250-4R7BNP | VENKEL LTD | Chip Capacitor;0805;C0G;25V;4.7pF;�0.1pF RoHS : Compliant | 12,000 | |||
| C01005HQN250-4R0ANP | VENKEL LTD | High-Q NP0 Capacitor;01005;HQN;25V;4pF;�0.05pF RoHS : Compliant | 0 | |||
| C0201C0G250-470JNP | VENKEL LTD | Chip Capacitor;0201;C0G;25V;47pF;�5% RoHS : Compliant | 0 | |||
| C0201HQN250-4R1CNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;25V;4.1pF;�0.25pF RoHS : Compliant | 0 | |||
| C0603HQN250-4R3ANP | VENKEL LTD | High-Q NP0 Capacitor;0603;HQN;25V;4.3pF;�0.05pF RoHS : Compliant | 0 | |||
| C0805C0G250-4R7CNE | VENKEL LTD | Chip Capacitor;0805;C0G;25V;4.7pF;�0.25pF RoHS : Compliant | 0 | |||
| C0805X7R250-474JNE | VENKEL LTD | Chip Capacitor;0805;X7R;25V;0.47uF;�5% RoHS : Compliant | 0 | |||
| MELFC0207-XK-1504FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�100PPM;1.5M;�1% RoHS : Compliant | 0 | |||
| HVCR1206-4W-7504FT | VENKEL LTD | High Voltage CR;1206;1/4W;7.5M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-7504DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;7.5M;�0.5% RoHS : Compliant | 0 | |||
| C0805C0G250-470FNP | VENKEL LTD | Chip Capacitor;0805;C0G;25V;47pF;�1% RoHS : Compliant | 0 | |||
C1206Z5U250-474ZNP | VENKEL LTD | Chip Capacitor;1206;Z5U;25V;0.47uF;+80-20% RoHS : Compliant | 0 | |||
| CRG2010-V-1504FT | VENKEL LTD | RoHS 10/10 Green CR;2010;1/2W;1.5M;�1% RoHS : Compliant | 0 | |||
| C0201C0G250-4R0CNP | VENKEL LTD | Chip Capacitor;0201;C0G;25V;4pF;�0.25pF RoHS : Compliant | 0 | |||
 Win Source Electronics | LMR50410XDBVR | Texas Instruments | SIMPLE SWITCHER 4-V TO 36-V, 1-A RoHS : Compliant |
| 47,230 | |
CDCS504TPWRQ1 | Texas Instruments | CLOCK FREQUENCY MULTIPLIER RoHS : Compliant |
| 44,000 | ||
| ADR5043BRTZ | Analog Devices Inc | ADI Low Cost 3.0V Shunt Voltage Reference |
| 30,000 | ||
| ADR5040ARTZ | Analog Devices Inc | Precision Micropower Shunt Mode Voltage References |
| 23,420 | ||
DSPIC33EP256GP504-I/ML | Microchip Technology Inc | IC MCU 16BIT 256KB FLASH 44QFN / MCU 16-bit dsPIC RISC 256KB Flash 3.3V 44-Pin QFN EP Tube RoHS : Compliant |
| 22,388 | ||
| AZ1345-04F.R7G | Amazing Microelectronic Corp | RoHS : Compliant |
| 18,950 | ||
LMR50410YQDBVRQ1 | Texas Instruments | NIXON PLUS-LMR50410YQDBVRQ1 RoHS : Compliant |
| 18,227 | ||
| ADR5041BKSZ | Analog Devices Inc | ADI Low Cost 2.5V Shunt Voltage Reference |
| 17,230 | ||
ADR5045BRTZ-REEL7 | Analog Devices Inc | IC VREF SHUNT 5V SOT23-3 RoHS : Compliant |
| 13,950 | ||
| HV733ATTE1504F | KOA Speer Electronics Inc | RES 1.5M OHM 1% 1W 2512 RoHS : Compliant |
| 10,900 | ||
| LT3504EUFD#PBF | Linear Technology | IC REG BUCK ADJ 1A QD 28QFN RoHS : Compliant |
| 7,263 | ||
| 1473150-4 | TE Connectivity | CONN SKT SODIMM 200POS R/A SMD RoHS : Compliant |
| 6,000 | ||
| SST25VF080B-50-4C-S2AF-T | Microchip Technology Inc | IC FLASH 8MBIT 50MHZ 8SOIC RoHS : Compliant |
| 1,920 | ||
| BCM56504B2KEBG | Broadcom Limited | 24-PORT GIGABIT ETHERNET MULTI |
| 375 | ||
| ADRF5045BCCZN-R7 | Analog Devices Inc | IC RF SWITCH SP4T 30GHZ 24LGA RoHS : Compliant |
| 20 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand