| Electronic Components Datasheet Search |
|
525L-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | LED RoHS : Compliant |
| 14,472 | |
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | LED RoHS : Compliant |
| 14,472 | ||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | LED RoHS : Compliant |
| 14,472 | ||
LMX2525LQ1321![]() | Rochester Electronics LLC | PLL FREQUENCY SYNTHESIZER RoHS : Unknown |
| 6,000 | ||
RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | ||
RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | ||
RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | ||
| CSHD5-25L TR13 PBFREE | Central Semiconductor Corp | DIODE SCHOTTKY 25V 5A DPAK |
| 2,500 | ||
| OWR-081525L-32B | OLE WOLFF Elektronik | SPEAKER 32OHM 15MW TOP PT 90.7DB |
| 2,096 | ||
| TSW-105-25-L-D-RA | Samtec Inc | CONN HEADER R/A 10POS 2.54MM RoHS : Compliant |
| 409 | ||
| TSW-105-25-L-D-LL | JRH ELECTRONICS | CONN HEADER VERT 10POS 2.54MM |
| 357 | ||
| HTSW-105-25-L-S-LL | JRH ELECTRONICS | CONN HEADER VERT 5POS 2.54MM |
| 337 | ||
| TSW-105-25-L-S-LL-004 | JRH ELECTRONICS | CONN HEADER VERT 5POS 2.54MM |
| 218 | ||
| SB-7525-LE | Artisan Power | BATTERY PACK LI-ION 3.7V |
| 200 | ||
| TSW-125-25-L-D | JRH ELECTRONICS | CONN HDR .100" 50POS |
| 139 | ||
![]() Avnet Americas | 525L24005CTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 24MHz ?0.5ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 525L24005CTR) RoHS : Compliant |
| 0 | |
| 525L32010DTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 32MHz ?1ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 525L32010DTR) RoHS : Compliant |
| 0 | ||
| 525L48005CTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 48MHz ?0.5ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 525L48005CTR) RoHS : Compliant |
| 0 | ||
| HTSW-125-25-L-T | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 3 Rows, 75 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-125-25-L-T) RoHS : Compliant | 0 | |||
| HTSW-225-25-L-Q-LA | Samtec Inc | - Bulk (Alt: HTSW-225-25-L-Q-LA) RoHS : Compliant | 0 | |||
| SNLF-S-S35-25L-GY | ITT Interconnect Solutions | - Bulk (Alt: SNLF-S-S35-25L-GY) RoHS : Not Compliant |
| 0 | ||
| 525L16025ITR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 16MHz ?2.5ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 525L16025ITR) RoHS : Compliant |
| 0 | ||
| 525L19205DTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 19.2MHz ?0.5ppm Clipped Sinewave 4-Pin CSMD T/R - Tape and Reel (Alt: 525L19205DTR) RoHS : Compliant |
| 0 | ||
| TSW-125-25-L-D-LL | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 2 Rows, 50 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-125-25-L-D-LL) RoHS : Compliant | 0 | |||
| TSW-125-25-L-Q | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 2 Rows, 50 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-125-25-L-Q) RoHS : Compliant | 0 | |||
| TSW-135-25-L-T-RA | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 3 Rows, 105 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-135-25-L-T-RA) RoHS : Compliant | 0 | |||
| RCWE080525L0JMEA | Vishay Intertechnologies | - Tape and Reel (Alt: RCWE080525L0JMEA) |
| 0 | ||
| HTSW-125-25-L-D-LL | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 2 Rows, 50 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-125-25-L-D-LL) RoHS : Compliant | 0 | |||
| HTSW-135-25-L-T | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 3 Rows, 105 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-135-25-L-T) RoHS : Compliant | 0 | |||
| TPX2012LKJFR1525L | Pulse Electronics Corporation | - Tape and Reel (Alt: TPX2012LKJFR1525L) RoHS : Compliant |
| 0 | ||
![]() Newark | MC33FS6525LAE | NXP Semiconductors | SYSTEM BASIS CHIP, CAN FD, LIN; RoHS : Compliant |
| 350 | |
CMC-4015-25L100![]() | Same Sky | MICROPHONE, ECM, OMNI, -22DB, 10VDC; RoHS : Compliant |
| 94 | ||
| PFS7525L | Power Integrations | PFC CONTROLLER, CCM, 10.2V-15V, ESIP-16; RoHS : Compliant |
| 80 | ||
| 202K185-25L-0 | TE Connectivity | HEAT SHRINK BOOT, ELASTOMER, BLK; Boot Configuration:Straight Lipped; I.D. Supplied - Imperial:2.6"; I.D. Supplied - Metric:66mm; Shrink Tubing / Boot Colour:Black; Total Length - Imperial:6.69"; Total Length - Metric:170mm RoHS Compliant: Yes RoHS : Compliant |
| 77 | ||
| 202K185-25L-0 | TE Connectivity | HEAT SHRINK BOOT, ELASTOMER, BLK; RoHS : Compliant |
| 55 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | DC/DC CONV, SYNC BOOST, 85DEG C; RoHS : Compliant |
| 10 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | DC/DC CONV, SYNC BOOST, 85DEG C; RoHS : Compliant |
| 10 | ||
| EKI-2525LI-AE | Advantech Co Ltd | ENET MODULE, DIN RAIL/PANEL, RJ45X5; RoHS : Compliant |
| 5 | ||
| 5-25L | Chemtronics | BRAID, DESOLDERING, ROSIN, 25FT; Braid Material:Copper; Width:1.3mm; Length:25ft; Product Range:-; Braid Colour:Yellow; Roll Length:25ft RoHS Compliant: Yes RoHS : Compliant |
| 0 | ||
| RE525-LF | Roth Elecronik GmbH | PCB, EUROCARD, FR4, 2.54MM; Board Type:Eurocard; Board Material:Epoxy Glass Composite; Hole Diameter:1mm; External Height:100mm; External Width:160mm; Board Thickness:1.5mm; SVHC:No SVHC (15-Jan-2019); Board Connector / RoHS Compliant: Yes RoHS : Compliant | 0 | |||
222K185-25L-0![]() | TE Connectivity | HEAT-SHRINK BOOT, R/A LIPPED, 66MM, BLK; RoHS : Compliant |
| 0 | ||
| HTSW-125-25-L-D | Samtec Inc | HEADER, 2.54MM, THOUGH HOLE VERTICAL, 50 POSITION; Connector Systems:Board-to-Board; Pitch Spacing:2.54mm; No. of Rows:2Rows; No. of Contacts:50Contacts; Contact Termination Type:Through Hole; Product Range:HTSW Series RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| TPX2012LKTFR1525L | Pulse Electronics Corporation | 2012 1.575-2.4-5GHZ TRIPLEXER TYPETF ROHS COMPLIANT: YES RoHS : Compliant | 0 | |||
![]() Analog Devices Inc | LTC3525LESC6-3#TRMPBF | Analog Devices Inc | 400mA uP Sync Boost DC/DC Conv RoHS : Compliant |
| 25,928 | |
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | 400mA uP Sync Boost DC/DC Conv RoHS : Compliant |
| 7,795 | ||
| MAX4525LEUB+ | Analog Devices Inc | Low-Voltage, Single-Supply Ana RoHS : Compliant |
| 2,132 | ||
| MAX4525LEUB+T | Analog Devices Inc | Low-Voltage, Single-Supply Ana RoHS : Compliant |
| 0 | ||
![]() RS | 5-25L | Chemtronics | SOLDER REMOVAL BRAID .050" |
| 1 | |
| 525L100G | B&B Electronics Manufacturing Company | TIMING BELT, 1.000" BELT WIDTH, 140 TEETH, 52.5" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 66925525LF | Amphenol FCi | 66925-525LF-30 GOLD CARD CONN |
| 0 | ||
| 9191132525LF | Amphenol FCi | 91911-32525LF-CONAN HEADER |
| 0 | ||
| FO-501.525-L | Bimba Manufacturing Company | 1-1/2IN BORE ; STROKE: 0.312 INCH(S); SCREW CLEARANCE HOLES, FRONT [4F] |
| 0 | ||
| 10080054525LF | Amphenol FCi | 10080054-525LF-PF HDR ASSY SEAHOUSE 4WA |
| 0 | ||
| EKI-2525LI-AE | Advantech Co Ltd | ETHERNET SWITCH, UNMANAGED, 5 FE, SLIM, REDUNDANT PWR INP, DUAL MOUNT, IP40, WT |
| 0 | ||
| MXZ25-25L-M9NZ | SMC Corporation of America | CYLINDER W/LINEAR GUIDE, COMPACT, MXZ SERIES |
| 0 | ||
| D2525-L12-12-SS | Brennan Industries | L12MBT-12MM BUTTWELD 90DEG STNLS |
| 0 | ||
| FOP-041.5/2.5-L | Bimba Manufacturing Company | CYLINDER, FLAT-I, MULTI POSIT,3/4IN BORE ; STROKE A: 1.5 INCH(S); STROKE B: |
| 0 | ||
| D2525-L15-15-SS | Brennan Industries | L15MBT-15MM BUTTWELD 90DEG STNLS |
| 0 | ||
| IPH-44A-25-25-L-11 | Nachi America | HYDRAULIC IP PUMP, DOUBLE, IPH SERIES |
| 0 | ||
| LT-2541-701-012 (GLT-00398525 | LT-2541-701-012 | LT2541701012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
| LTIGK721-6S-BL-RC-WBL/125N (TGL-53068525|LTIGK721-6S-BL-RC-WBL/125N|LTIGK7216SBL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| LTIGM50-6S-BL-AM-WBL/18V (TGL-53395525|LTIGM50-6S-BL-AM-WBL/18V|LTIGM506SBLAMWBL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Bisco Industries | NAS1352-5LE16P | B&B Specialties Inc | 300 | |||
| 2525LF10 | MISC. INDUSTRIAL HRD | 50 | ||||
| 15-25L | MISCELLANEOUS | 1 | ||||
| NAS1352-5LE20P | NAS SOCKET CAP SCREWS | 1 | ||||
![]() Rochester Electronics | PH2525L,115![]() | NXP Semiconductors | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant |
| 2,350 | |
PH2525L,115![]() | Nexperia | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant |
| 3,158 | ||
| LMX2525LQ1321 | National Semiconductor Corporation | PLL Frequency Synthesizer RoHS : Not Compliant |
| 6,000 | ||
![]() TME | BM2525L | BM Group spa | Cable gland; M25; IP68; brass |
| 5 | |
| RE525-LF | Roth Elecronik GmbH | Board: universal; single sided; W: 100mm; L: 160mm |
| 3 | ||
| 1512525L3 | CML Innovative Technologies | LED lamp; S5,7s,T1-3/4; white warm; 12VDC; 12VAC; plastic; 3mm |
| 0 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 0.5÷4.5VDC; Uout: 3VDC; 0.45A; SC70-6 RoHS : Compliant |
| 0 | ||
CMC-4015-25L100![]() | Same Sky | Microphone; electret; 100Hz÷20kHz; 2.2kΩ; -25dB; Ø4x1.5mm; 500uA RoHS : Compliant |
| 0 | ||
| FB2501L-B40/35-25L | Fagor Electrónica | Bridge rectifier: single-phase; Urmax: 100V; Ufmax: 1.1V; If: 25A |
| 0 | ||
| XCMD2525L1 | Telemechanique Sensors | Limit switch |
| 0 | ||
| FB2500L-B20/15-25L | Fagor Electrónica | Bridge rectifier: single-phase; Urmax: 50V; Ufmax: 1.1V; If: 25A |
| 0 | ||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | LED; green; SMD; 16÷18lm; 3.5x2.8mm; 120°; 60mA; λd: 518nm; 3.15V RoHS : Compliant |
| 0 | ||
| GN31525L | Lovato Electric Inc | Switch: reversing cam switch; Stabl.pos: 3; 315A; 1-0-2; Pos: 3 |
| 0 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 0.5÷4.5VDC; Uout: 3VDC; 0.45A; SC70; SMD RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | SNLF-S-S35-25L-GY | ITT Interconnect Solutions | SNLF-S-S35-25L-GY | 0 | ||
| SNLF-S-C35-25L-Y | ITT Interconnect Solutions | SNLF-S-C35-25L-Y | 0 | |||
| SNLM-P-S25-25L-GY | ITT Interconnect Solutions | SNLM-P-S25-25L-GY | 0 | |||
| SNLF-S-C35-25L-GY | ITT Interconnect Solutions | SNLF-S-C35-25L-GY | 0 | |||
| SNLF-S-S35-25L-BL | ITT Interconnect Solutions | SNLF-S-S35-25L-BL | 0 | |||
| SNLF-S-S35-25L-R | ITT Interconnect Solutions | SNLF-S-S35-25L-R | 0 | |||
222K185-25L-0![]() | TE Connectivity | RoHS : Compliant |
| 0 | ||
| SNLM-P-C35-25L-R | ITT Interconnect Solutions | SNLM-P-C35-25L-R | 0 | |||
| 600H005-25LPA | Glenair Inc | 0 | ||||
| 66925-525LF | Amphenol FCi | 30 GOLD CARD CONN RoHS : Compliant |
| 0 | ||
| SNLM-P-C35-25L-GY | ITT Interconnect Solutions | SNLM-P-C35-25L-GY | 0 | |||
| SNLM-P-S35-25L-BL | ITT Interconnect Solutions | SNLM-P-S35-25L-BL | 0 | |||
| SNLM-P-C35-25L-GN | ITT Interconnect Solutions | SNLM-P-C35-25L-GN | 0 | |||
| 91910-21525LF | Amphenol FCi | CONAN HEADER LF RoHS : Compliant |
| 0 | ||
| SNLM-P-S25-25L-BK | ITT Interconnect Solutions | SNLM-P-S25-25L-BK | 0 | |||
![]() Powell Electronics | TSW-105-25-L-D-RA | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 1,918 | |
| HTSW-105-25-L-D | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 599 | ||
| DW-02-10-S-D-525-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 536 | ||
| TSW-105-25-L-D-LA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 506 | ||
| HTSW-105-25-L-D-010 | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 460 | ||
| TSW-105-25-L-D-LL | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 357 | ||
| TSW-105-25-L-S-LA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 327 | ||
| HTSW-105-25-L-S-LL | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 234 | ||
| TSW-105-25-L-S-LL-004 | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 218 | ||
| HMTMS-105-25-L-D-005 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 166 | ||
| TSW-125-25-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 139 | ||
| TSW-115-25-L-S-LA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 106 | ||
| TSW-125-25-L-T | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 94 | ||
| TSW-115-25-L-T-RA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 61 | ||
| HTSW-135-25-L-D-LA | Samtec Inc | PCB Header, High-Profile, Through-Hole, RoHS : Compliant |
| 25 | ||
![]() Richardson RFPD | 525L25DT13M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | ||
| 525L25CA13M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | Conv DC-DC 0.5V to 4.5V Synchronous Step Up Single RoHS : Compliant |
| 0 | ||
| 525L25DT12M80000 | CTS Corporation | Osc TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 10-FZ071SA075S501-L525L58 | Vincotech | POWERIGBT TRANSISTOR RoHS : Compliant |
| 0 | ||
| 525L25DT40M000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| WHM30-2525LE | WanTcom | Low Noise Wide Band Amplifier RoHS : Not Compliant |
| 0 | ||
| WHM30-2525LE-EB | WanTcom | RF MW Amp Eval Bd | 0 | |||
| 525L20005IAR | CTS Corporation | Clipped Sine Wave TCXO/VC-TCXO Ceramic Surface Mou RoHS : Compliant | 0 | |||
| 525L05DA40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05DT40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L10IA19M2000 | CTS Corporation | Osc TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05CT40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | Conv DC-DC 0.5V to 4.5V Synchronous Step Up Single RoHS : Compliant |
| 0 | ||
| 525L05IA40M000 | CTS Corporation | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | TSW-125-25-L-D | INSTOCK | 14 | |||
![]() Avnet Abacus | 91910-21525LF | Amphenol Corporation | Conn Board to Board HDR 25 POS 1mm Solder ST SMD Tube (Alt: 91910-21525LF) RoHS : Compliant | 0 | ||
| 91911-31525LF | Amphenol Corporation | - Tape and Reel (Alt: 91911-31525LF) RoHS : Compliant | 0 | |||
| RCWE080525L0FMEA | Vishay Intertechnologies | (Alt: RCWE080525L0FMEA) RoHS : Compliant | 0 | |||
| SNLM-P-S25-25L-W | ITT Interconnect Solutions | Circular Connector Assemblies (Alt: 121698-0014) RoHS : Compliant | 0 | |||
| SNLM-P-S25-25L-GY | ITT Interconnect Solutions | (Alt: 121698-0014) RoHS : Not Compliant | 0 | |||
| TSW-105-25-L-D-RA | Samtec Inc | (Alt: TSW-105-25-L-D-RA) RoHS : Compliant | 0 | |||
| SNLF-S-S35-25L-BK | ITT Interconnect Solutions | Conn Circular SKT 1 POS Screw ST Cable Mount 1 Terminal 1 Port (Alt: SNLF-S-S35-25L-BK) RoHS : Compliant | 0 | |||
| SNLF-S-S35-25L-GN | ITT Interconnect Solutions | CANSNLFSS3525LGN (Alt: SNLF-S-S35-25L-GN) RoHS : Compliant | 0 | |||
| TSW-105-25-L-S-RA | Samtec Inc | (Alt: TSW-105-25-L-S-RA) RoHS : Compliant | 0 | |||
| SNLM-P-S35-25L-GN | ITT Interconnect Solutions | CANSNLMPS3525LGN (Alt: 121698-0004) RoHS : Compliant | 0 | |||
| SNLF-S-S25-25L-BK | ITT Interconnect Solutions | (Alt: 121698-0015) RoHS : Compliant | 0 | |||
| TSW-115-25-L-S-RA | Samtec Inc | (Alt: TSW-115-25-L-S-RA) RoHS : Compliant | 0 | |||
| SNLM-P-S35-25L-BK | ITT Interconnect Solutions | (Alt: 121698-0005) RoHS : Compliant | 0 | |||
| SNPFL-S-C25-25L-GN | ITT Interconnect Solutions | (Alt: 078217-4010) RoHS : Compliant | 0 | |||
| MTMS-105-25-L-S-125 | Samtec Inc | Pin Header BoardtoBoard 1 Rows 5 Contacts Through Hole MTMS Series Unshrouded Straight (Alt: MTMS-105-25-L-S-125) RoHS : Compliant | 0 | |||
![]() Avnet Silica | C17525_LISA4-WWW | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 60 Spot Beam PMMA Clear (Alt: C17525_LISA4-WWW) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | PPS142-1A1525-L | TE Connectivity | IN STOCK SHIP TODAY | 975 | ||
| SE2525L | SIGE SEMICON | IN STOCK SHIP TODAY | 30 | |||
| SE2525L-R | SIGE SEMICON | IN STOCK SHIP TODAY | 5 | |||
![]() EBV Elektronik | PFS7525L | Power Integrations | (Alt: PFS7525L) RoHS : Compliant | 0 | ||
| C17525_LISA4-WWW | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 60 Spot Beam PMMA Clear (Alt: C17525_LISA4-WWW) RoHS : Compliant | 0 | |||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | Low Power LEDs none SSL (Alt: S10C007518) RoHS : Compliant | 0 | |||
| 67-22S/G1C-D1525L4L82936Z6/2T | Everlight Electronics Co Ltd | (Alt: S10C008455) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 202K185-25L-0 | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | |
222K185-25L-0![]() | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | MC33FS6525LAE | NXP Semiconductors | Stock RoHS : Compliant | 1,000 | ||
![]() Master Electronics | MRTD-02-28-L-52.5-L1 | Samtec Inc | RoHS : Compliant |
| 0 | |
| HTSW-105-25-L-D-NA-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-105-25-LM-Q-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-115-25-LM-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-125-25-L-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-125-25-L-T | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-225-25-L-Q-LA | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| SNLF-S-S35-25L-GY | ITT Interconnect Solutions | SNLF-S-S35-25L-GY RoHS : Compliant |
| 0 | ||
| TSW-125-25-L-D-LL | Samtec Inc | Pin Header Board-to-Board Wire-to-Board 2.54 mm 2 Rows 50 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
| TSW-125-25-L-Q | Samtec Inc | Pin Header Board-to-Board Wire-to-Board 2.54 mm 2 Rows 50 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
| TSW-135-25-L-T-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-135-25-L-T-RA | Samtec Inc | Pin Header Board-to-Board 2.54 mm 3 Rows 105 Contacts Through Hole Right Angle TSW Series RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-35.25-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-115-25-LM-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-135-25-L-T | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 5-25L | Chemtronics | Desoldering Braid / Solder Removal Chem-Wik Rosin |
| 50 | |
| EKI-2525LI-AE | Advantech Co Ltd | Unmanaged Ethernet Switches 5 FE Low Profile Unmanaged Switch w/Wide |
| 23 | ||
![]() Pasternack Enterprises US | PE36525LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 1.85mm Male to 1.85mm Male Cable 18 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-18, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 10 | |
| PE36525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50. 1.85mm Male to 1.85mm Male Cable Using PE-SR405FL Coax, RoHS. PE36525LF is a 1.85mm male to 1.85mm male cable using PE-SR405FL coax. This Pasternack 1.85mm male to 1.85mm male cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 1.85mm to male 1.85mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE36525LF 1.85mm male to 1.85mm male cable assembly is constructed with PE-SR405FL coax and the maximum VSWR is 1.4:1. | 10 | |||
| PE3525LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 48 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-48, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-48 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3W25525LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Male Cable Using RG316 Coax with HeatShrink, LF Solder. PE3W25525LF/HS is a reverse polarity SMA female to N male cable using RG316 coax. This Pasternack reverse polarity SMA female to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25525LF/HS SMA reverse polarity female to N male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W00525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL, RF Cable Type: PE-SR401AL, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using PE-SR401AL Coax, RoHS. PE3W00525LF is a N male to N male cable using PE-SR401AL coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00525LF N male to N male cable assembly is constructed with PE-SR401AL coax. | 0 | |||
| PE3525LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 12 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3525LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 36 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-36, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE36525LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. 1.85mm Male to 1.85mm Male Cable 6 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-6, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE3525LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 6 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-6, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-6 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable Using RG402 Coax, RoHS. PE3525LF is a SMA female 2 hole flange to SMA female 2 hole flange cable using RG402 coax. This Pasternack SMA female 2 hole flange to SMA female 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 2 hole flange to female SMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3525LF SMA female 2 hole flange to SMA female 2 hole flange cable assembly is constructed with RG402 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE36525LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 1.85mm Male to 1.85mm Male Cable 24 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-24, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE36525LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. 1.85mm Male to 1.85mm Male Cable 60 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 60 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 60 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-60, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-60 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 60 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE3W14525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMB Plug to SMB Plug Cable Using RG188 Coax, LF Solder. PE3W14525LF is a SMB plug to SMB plug cable using RG188 coax. This Pasternack SMB plug to SMB plug cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our plug SMB to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14525LF SMB plug to SMB plug cable assembly is constructed with RG188 coax. | 0 | |||
| PE36525LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. 1.85mm Male to 1.85mm Male Cable 48 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 48 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 48 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-48, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-48 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 48 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE3W02525LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG225 Coax with HeatShrink, RoHS. PE3W02525LF/HS is a BNC male to BNC male cable using RG225 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02525LF/HS BNC male to BNC male cable assembly is constructed with RG225 coax. | 0 | |||
![]() Sager | HTSW-105-25-L-D-010 | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 697 | |
| HTSW-105-25-L-S-LL | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 354 | ||
| HMTMS-105-25-L-D-005 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 High-Temp Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 251 | ||
| HTSW-125-25-L-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-225-25-L-Q-LA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-125-25-L-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-125-25-L-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-135-25-L-T-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-125-25-L-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-135-25-L-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HMTMS-115-25-L-S-115 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-135-25-L-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMS-125-25-L-D-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-205-25-L-Q-LA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-105-25-L-S-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TE Connectivity | 222K185-25L-0![]() | TE Connectivity | 222K185-25L-0 Body Orientation: Right Angle Molded Part Shape Code: 222 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Right Angle 222 25 | Part Number: 222K185-25L-0 | Internal Number: CV7372-000 | TE Connectivity RoHS : Compliant |
| 54 | |
![]() Teledyne HiRel | 54ACT2525LMQB | Teledyne HiRel | CLOCK DRIVER, MINIMUM SKEW | 0 | ||
![]() Vyrian | AP1186K5-25L-U | Diodes Incorporated | Fixed Positive LDO Regulator, 2.5V, 0.38V Dropout, BIPolar, PSSO5 | 15,575 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | Switching Regulator, 0.45A, CMOS, PDSO6 RoHS : Compliant | 11,152 | |||
| HMC525LC4RTR | Analog Devices Inc | RF/Microwave Mixer RoHS : Compliant | 10,409 | |||
| LTC3525LESC6-3#PBF | Analog Devices Inc | Switching Regulator, 0.45A, CMOS, PDSO6 RoHS : Compliant | 8,689 | |||
| HMC525LC4 | Analog Devices Inc | Image Rejection Mixer, 4000MHz Min, 8500MHz Max, 11dB Conversion Loss-Max RoHS : Compliant | 6,190 | |||
MT5C1005-25L![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 5,686 | |||
MT5C2565-25LPXT![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 5,501 | |||
MT5LC2565-25LPIT![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 5,386 | |||
MT5C1005-25LPAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 5,253 | |||
MT5C1005-25LAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 4,100 | |||
MT5LC1005-25L![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 3,919 | |||
| PH5525LT/R | Nexperia | Power Field-Effect Transistor, 81.7A I(D), 25V, 0.0082ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 | 3,596 | |||
MT5C1605-25LIT![]() | Micron Technology Inc | Standard SRAM, 4KX4, 25ns, CMOS, PDIP22 RoHS : Not Compliant | 3,536 | |||
MT5LC1005-25LAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 2,570 | |||
MAX4525LETB-T![]() | Maxim Integrated Products | DPDT, 1 Func, 2 Channel, CMOS RoHS : Not Compliant | 922 | |||
![]() Win Source Electronics | HMC525LC4 | Analog Devices Inc | GaAs MMIC I/Q MIXER 4 - 8.5 GHz | IC MMIC IQ MIXER 4-8.5GHZ 24-QFN RoHS : Compliant |
| 300 | |
| HMC525LC4TR | Analog Devices Inc | Up/Down Conv Mixer 8.5GHz 24-Pin CQFN EP T/R / IC MMIC IQ MIXER 4-8.5GHZ 24-QFN RoHS : Compliant |
| 300 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |