| Electronic Components Datasheet Search |
|
530-CB2-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DB Roberts | M3235-3005-3005 | RAF Electronic Hardware | RoHS : Compliant | 0 | ||
| M3215-3005-3005 | RAF Electronic Hardware | 0 | ||||
| 07530-00213 | Avdel | REAR PLUG | 0 | |||
| 07530-00501 | Avdel | PLUG | 0 | |||
| 07530-02202 | Avdel | 0 | ||||
| 07530-03300 | Avdel | NEOSPEED 5/32 NOSE EQUIPMENT | 0 | |||
| 34009530002 | Essentra Components | 0 | ||||
| 304530040050 | Essentra Components | 0 | ||||
| E6-55-530S-10 | Southco | E6-55-530S-10 | 0 | |||
| 56-15-301-11 | Southco | SLEEVE | 0 | |||
| 4530T-632-S-12 | RAF Electronic Hardware | 0 | ||||
| FHA-M5-30 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| FST5353002Z11C | Avdel | RIVETTO AUTOPERF. DIAM. 5.3X5. | 0 | |||
| FHS-M5-30 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| D4-FJ5-30 | Southco | D4-FJ5-30 | 0 | |||
![]() EBV Elektronik | STPS0530Z | STMicroelectronics | Diode Schottky 30V 05A 2Pin SOD123 TR (Alt: STPS0530Z) RoHS : Compliant | 252,000 | ||
| IRF5305PBF | Infineon Technologies AG | Power MOSFET P Channel 55 V 31 A 006 ohm TO220AB Through Hole (Alt: SP001564354) RoHS : Compliant | 61,000 | |||
| 16-213UYC/S530-A6/TR8 | Everlight Electronics Co Ltd | LED UniColor Yellow 591nm 2Pin Chip LED TR (Alt: 3016237606) RoHS : Compliant | 18,000 | |||
| 19-22SURSYGC/S530-A3/E3/TR8 | Everlight Electronics Co Ltd | LED SMD Top View BiColor Hyper Red 624nmSuper Yellow Green 573nm 4pin Chip 7TR 2k (Alt: 3019226806) RoHS : Compliant | 18,000 | |||
| 264-7SYGD/S530-E3 | Everlight Electronics Co Ltd | LED UniColor Yellow Green 575nm 2Pin TR (Alt: 3002640A04) RoHS : Compliant | 17,000 | |||
| 91-21SYGC/S530-E2/TR7 | Everlight Electronics Co Ltd | LED UniColor Yellow Green 575nm 2Pin SMD TR (Alt: 3091212W16) RoHS : Compliant | 12,000 | |||
| 67-21SURC/S530-A3/TR8 | Everlight Electronics Co Ltd | (Alt: 3867210100) RoHS : Compliant | 12,000 | |||
| 264-7SURC/S530-A3 | Everlight Electronics Co Ltd | LED UniColor Red 632nm 2Pin T1 TR (Alt: 3802641004) RoHS : Compliant | 11,000 | |||
| 17-215UYC/S530-A3/4T | Everlight Electronics Co Ltd | (Alt: S10B017613) RoHS : Compliant | 4,000 | |||
| 19-21SYGC/S530-E1/4T | Everlight Electronics Co Ltd | LED Single Chip Yellow Green 573nm 25mA 2Pin SMD TR (Alt: S10B017614) RoHS : Compliant | 4,000 | |||
| HCPL-2530-500E | Broadcom Limited | Optocoupler DCIN 2CH Transistor With Base DCOUT 8Pin PDIP SMD TR (Alt: HCPL-2530-500E) RoHS : Compliant | 3,000 | |||
| 264-7UYOC/S530-A3 | Everlight Electronics Co Ltd | LED UniColor Yellow Orange 611nm 2Pin T1 TR (Alt: 3002646D04) RoHS : Compliant | 2,000 | |||
| 12-22UYSYGC/S530-A2/TR8 | Everlight Electronics Co Ltd | (Alt: 3912226106) RoHS : Compliant | 2,000 | |||
| MPF5302AMMAAES | NXP Semiconductors | SOT20901SC A 15A core supply regulators with AVP and watchdog (Alt: MPF5302AMMAAES) RoHS : Compliant | 490 | |||
| MPF5302AMMA0ES | NXP Semiconductors | (Alt: MPF5302AMMA0ES) RoHS : Compliant | 490 | |||
![]() Pasternack Enterprises US | PE34530 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using RG178 Coax., Radio frequency assembly SMA male to MCX plug cable using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug cable using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MCX cable connection on the other. Our SMA to MCX cable assembly has male gender on end 1 and plug on end 2. PE34530 can also be known as a SMA plug to MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to MCX male cable assembly PE34530 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE34530 RF cable are available on our downloadable PDF datasheet.PE34530 can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 405 | ||
| PE3FCA245-30M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA245-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA245-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 111 | ||
| PE3FCA195-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM3 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA195-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA195-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 110 | ||
| PE3FCA255-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 5.0mm LSZH, 2.0mm breakout, Orange-30M. Pasternack’s PE3FCA255-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 6-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA255-30M fiber optic cable with a 5 mm cable diameter and 50 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE3FCA395-30M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber SC UPC to SC UPC, OS2 Single Mode Distribution Cable, 5.6mm LSZH, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA395-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 8-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA395-30M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 32 | ||
| PE3C5530-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug Right Angle to SMA Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly MMCX plug right angle to SMA male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a SMA cable connection on the other. Our right angle MMCX to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C5530-48 can also be known as a right angle MMCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C5530-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our right angle MMCX plug to SMA male cable has a maximum VSWR of 1.4:1. MMCX male to SMA plug cable assembly PE3C5530-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5530-48 can also be used in the other direction and will be a SMA male to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17530 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.4mm Male to SMA Male Cable Using RG405 Coax. PE3W17530 is a 2.4mm male to SMA male cable using RG405 coax. This Pasternack 2.4mm male to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our male 2.4mm to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17530 2.4mm male to SMA male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W04530-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm N Female to 75 Ohm N Female Cable 60 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm N female to 75 Ohm N female cable 60 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm N female to 75 Ohm N female cable 60 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to type N cable is a female to female coax assembly, PE3W04530-60, can also be known as a N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to N type jack cable assembly PE3W04530-60 is built with RG11 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N female to 75 Ohm N female cable 60 inch length using 75 Ohm RG11 coax. |
| 0 | ||
| PE3W10530 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to TNC Female Right Angle Bulkhead Cable Using LMR-200 Coax. PE3W10530 is a N male to TNC female right angle bulkhead cable using LMR-200 coax. This Pasternack N male to TNC female right angle bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to female TNC right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10530 N male to TNC female right angle bulkhead cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE2235-30 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Design: Coupler, Minimum Frequency: 4 GHz, Maximum Frequency: 12 GHz, Maximum Input Power: 600 Watt, Coupling Value: 30 dB. Directional 30 dB N Coupler From 4 GHz to 12 GHz Rated To 600 Watts. RF coupler part number PE2235-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with N ports. Our directional coupler design uses N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 4 GHz and a maximum frequency of 12 GHz. Directional coupler part # PE2235-30 is constructed with a coupling value of 30 dB and a coupler directivity of 15 dB. This female N directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 600 watts. Our directional coupler design with N connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.3. Additional female N coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2235-30 directional 30 dB N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
| PE3C6530/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. Mini SMP Female to MMCX Plug Right Angle Cable Using PE-P047 Coax with HeatShrink., Radio frequency assembly mini SMP female to MMCX plug right angle cable using PE-P047 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Mini SMP female to MMCX plug right angle cable using PE-P047 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and right angle MMCX cable connection on the other. Our mini SMP to right angle MMCX cable assemblies have a female gender on end 1 and plug on end 2. This mini SMP to MMCX cable is a female to plug coax assembly, PE3C6530/HS, can also be known as a mini SMP jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to MMCX male cable assembly PE3C6530/HS is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency mini SMP female to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6530/HS can also be used in the other direction and will be right angle MMCX plug to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to MMCX cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to MMCX plug right angle cable using PE-P047 coax with heatshrink. | 0 | |||
| PE33530LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. N Male to N Female Bulkhead Cable Using RG393 Coax, RoHS. PE33530LF is a N type male to N type female bulkhead cable using RG393 coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33530LF type N male to type N female bulkhead cable assembly is constructed with RG393 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3C5302LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W05302/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MCX Jack Cable Using LMR-100 Coax with HeatShrink. PE3W05302/HS is a SMA female bulkhead to MCX jack cable using LMR-100A coax. This Pasternack SMA female bulkhead to MCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our female SMA bulkhead to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05302/HS SMA female bulkhead to MCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W25302 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SSMB Jack Bulkhead Cable Using RG196 Coax. PE3W25302 is a SMA female bulkhead to SSMB jack bulkhead cable using RG196 coax. This Pasternack SMA female bulkhead to SSMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our female SMA bulkhead to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25302 SMA female bulkhead to SSMB jack bulkhead cable assembly is constructed with RG196 coax. | 0 | |||
![]() Teledyne HiRel | 5962-9325301BDA![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9325301BCA![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/75307B2A![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET RoHS : Not Compliant | 0 | |||
| 5962-8755301EA | Teledyne HiRel | DECODER/DEMULTIPLEXER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| M38510/75302BCA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
| M38510/75302B2A | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
M38510/75304BFA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
M38510/75307BFA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET RoHS : Not Compliant | 0 | |||
5962-9325301B2A![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-87553012A | Teledyne HiRel | DECODER/DEMULTIPLEXER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
M38510/75307BEA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET RoHS : Not Compliant | 0 | |||
| M38510/75302BDA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
M38510/75304B2A![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
M38510/75304BEA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
| 5962-8755301FA | Teledyne HiRel | DECODER/DEMULTIPLEXER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | TFCR0402-16W-E-4530DT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;453R;�0.5% RoHS : Compliant | 30,000 | ||
| TFCR0201-32W-K-4530CT | VENKEL LTD | Thin Film CR;0201;1/32W;�100PPM;453R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-4530CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;453R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-5300BT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;530R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-9530CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;953R;�0.25% RoHS : Compliant | 0 | |||
| CR0402-10W-9530FT | VENKEL LTD | Chip Resistor;0402;1/10W;953R;�1% RoHS : Compliant | 0 | |||
| CR0402-16W-9530DT | VENKEL LTD | Chip Resistor;0402;1/16W;953R;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-4530FT | VENKEL LTD | Chip Resistor;0805;1/10W;453R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-4530FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;453R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-9530FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;953R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-5301DT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;5.3K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-9530CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;953R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-5300BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;530R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-5303FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;530K ;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-5300FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;530R;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | XCZU2EG-1UVBA530E | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,934 | ||
| XCZU2EG-1LUVBA530I | AMD Xilinx | Programmable SoC RoHS : Compliant | 3,593 | |||
| XCZU2EG-1UVBA530I | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,542 | |||
| XCZU2EG-1UBVA530E | AMD Xilinx | Programmable SoC RoHS : Compliant | 3,211 | |||
| XCZU2CG-1LUBVA530I | AMD Xilinx | Programmable SoC RoHS : Compliant | 3,188 | |||
| XCZU2CG-L1UBVA530I | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,022 | |||
| XCZU2EG-1UBVA530I | AMD Xilinx | Programmable SoC RoHS : Compliant | 2,812 | |||
| XCZU2CG-L2UBVA530E | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,492 | |||
| XCZU2CG-2UBVA530E | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,215 | |||
| XCZU2CG-1UBVA530E | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,115 | |||
| XCZU2EG-2LUVBA530E | AMD Xilinx | Programmable SoC RoHS : Compliant | 2,055 | |||
| XCZU2CG-1UBVA530I | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 1,774 | |||
| XCZU2CG-2LUBVA530E | AMD Xilinx | Programmable SoC RoHS : Compliant | 1,619 | |||
| XCZU2CG-2UBVA530I | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 1,369 | |||
| 153.0020.5302 | Littelfuse Inc | Electric Fuse, 30A, 32VDC, 1000A (IR), Inline/holder RoHS : Compliant | 278 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |