 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
601-01SC-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 PEI Genesis | AT60-16-0122 | Amphenol Sine Systems |
| 53,089 | ||
| AT60-16-0144 | Amphenol Sine Systems |
| 7,900 | |||
| AT60-16-0144-PC | Amphenol Sine Systems |
| 3,533 | |||
| AT60-16-0144PC | Amphenol Sine Systems |
| 3,300 | |||
| 10-597726-012 | Amphenol Corporation |
| 107 | |||
| 10-606014-341 | Amphenol Corporation |
| 55 | |||
| N16-016-0112-1 | Amphenol Tuchel |
| 0 | |||
| M81714/60-16-01 | Amphenol PCD |
| 0 | |||
| AT60-16-0122-RL | Amphenol Sine Systems |
| 0 | |||
| AT60-16-0144-RL | Amphenol Sine Systems |
| 0 | |||
| M81714/60-16-01-LC | Amphenol PCD |
| 0 | |||
| 9760-10P-621 | Amphenol Corporation |
| 0 | |||
| 9760-16P-689 | Amphenol Corporation |
| 0 | |||
| 9760-18P | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| 711-1760-1-11 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | AT60-16-0144 | Amphenol Sine Systems | Size 16 Pin Contact S F 1618AWG |
| 63,680 | |
| AT60-16-0122 | Amphenol Sine Systems | Size 16 Pin Contact S F 1618AWG |
| 36,000 | ||
| 75160-156-16LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 903 | ||
| 5179160-1 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 594 | ||
| 52601-G20-8TLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 264 | ||
| PSD-6015 | Altech Corporation | Power Supply;Din Rail,60W,Univ RoHS : Compliant |
| 139 | ||
| QMSS-026-01-L-D-EM2-PC4 | Samtec Inc | BOARD CONNECTOR 26POS 2ROW RoHS : Compliant |
| 34 | ||
| 732-8260-16 | TE Connectivity | DEUTSCH CONNECTOR 732-8260-16 RoHS : Compliant |
| 24 | ||
| 1060-16-0122 | TE Connectivity | STAMPED-SIZE 16 TERM RoHS : Compliant |
| 21 | ||
| 10-101960-14G | Amphenol Corporation | Connector |
| 15 | ||
| 1-1617560-1 | TE Connectivity | Relays |
| 7 | ||
| 87-416019-11P | Amphenol Corporation | CONNECTOR |
| 7 | ||
| 601.6169.183 | Altech Corporation | SAFETY SWITCH (WITHOUT ACTUATOR KEY) |
| 7 | ||
| 660-012NF25H6-01 | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 5 | ||
| 91-542601-35P | Amphenol Corporation | RECEPT |
| 3 | ||
 PUI | 12.60150 | 241,380 | ||||
| 12.60181 | 81,106 | |||||
| 12.60183 | 24,950 | |||||
| 12.60110 | 21,944 | |||||
| 12.60146 | 21,450 | |||||
| 12.60158 | 4,970 | |||||
| 12.60101 | 4,970 | |||||
| 12.60106 | 1,682 | |||||
| 12.60147 | 1,500 | |||||
| 12.60148 | 1,500 | |||||
| 12.60138 | 1,000 | |||||
| 12.60188 | 197 | |||||
| 2601 | 100 | |||||
| 12.60105 | 75 | |||||
| 60-1-5 | 25 | |||||
 Chip 1 Exchange | 1060-16-0122 | TE Connectivity | INSTOCK RoHS : Compliant | 579,200 | ||
| 1060-16-0144 | TE Connectivity | INSTOCK RoHS : Compliant | 10,400 | |||
| 55015601400 | INSTOCK | 8,400 | ||||
| CR21-1601-FL | ASJ Holdings Limited | INSTOCK RoHS : Compliant | 4,659 | |||
| 744786011 | INSTOCK | 3,065 | ||||
| EN 60127-2-3 | INSTOCK | 2,243 | ||||
| 6010B0073601 | INSTOCK | 1,920 | ||||
| MMZ1608S601A | TDK Corporation | INSTOCK RoHS : Compliant | 1,713 | |||
| MKS2660-6-0-1010 | INSTOCK | 663 | ||||
| 601-1060-110 | Lear Corporation | INSTOCK | 216 | |||
| 206-01755-000 | TE Connectivity | INSTOCK | 168 | |||
| NT-2100426-01 | INSTOCK | 131 | ||||
| 74438336015HT | Wurth Elektronik | INSTOCK RoHS : Compliant | 93 | |||
| 50208-00601-001 | Aces Electronics Co Ltd | INSTOCK RoHS : Compliant | 79 | |||
| ASP-65996-01 | Pulse Electronics Corporation | INSTOCK | 61 | |||
 Avnet Silica | PMEG6010ELRX | Nexperia | Schottky Rectifier 60 V 1 A Single CFP3 SOD123W 2 Pins 660 mV (Alt: PMEG6010ELRX) RoHS : Compliant | 1,854,000 | ||
| PMEG6010ER-QX | Nexperia | (Alt: PMEG6010ER-QX) RoHS : Compliant | 951,000 | |||
| DMT6010LPS-13 | Diodes Incorporated | (Alt: DMT6010LPS-13) RoHS : Compliant | 5,000 | |||
STM6601BM2DDM6F | STMicroelectronics | (Alt: STM6601BM2DDM6F) RoHS : Compliant | 3,000 | |||
| PJMH190N60E1_T0_00601 | PanJit Semiconductor | PJ190N60E1TPHF003KTO247AD3LDMOSTONFET600CTUMNHPJ (Alt: PJMH190N60E1_T0_00601) RoHS : Compliant | 3,000 | |||
| PSMP055N08NS1_T0_00601 | PanJit Semiconductor | PJ055N08NSTPHF005KTO220ABLMOSTONFET80CTMNHNF80QI01PJ (Alt: PSMP055N08NS1_T0_00601) RoHS : Compliant | 3,000 | |||
| STSPIN32F0601Q | STMicroelectronics | HalfBridge Motor Driver ThreePhase 33V 72Pin VFQFPN Tray (Alt: STSPIN32F0601Q) RoHS : Compliant | 2,856 | |||
DMTH6010LPS-13 | Diodes Incorporated | (Alt: DMTH6010LPS-13) RoHS : Compliant | 2,500 | |||
| DMNH6012LK3-13 | Diodes Incorporated | (Alt: DMNH6012LK3-13) RoHS : Compliant | 2,500 | |||
AP6015-M10G-13 | Diodes Incorporated | DCDC Switching Buck Step Down Regulator Adj 25V55Vin 800mV55V800mA out 12MHz MSOP10 (Alt: AP6015-M10G-13) RoHS : Compliant | 2,500 | |||
| DMN6013LFGQ-7 | Diodes Incorporated | (Alt: DMN6013LFGQ-7) RoHS : Compliant | 2,000 | |||
| LPC3240FET296/01K | NXP Semiconductors | MCU 1632Bit LPC3240 ARM926EJS RISC 256KB SRAM 296Pin TFBGA TR (Alt: LPC3240FET296/01K) RoHS : Compliant | 1,764 | |||
STD1NK60-1 | STMicroelectronics | Power MOSFET N Channel 600 V 500 mA 8 ohm TO251AA Through Hole (Alt: STD1NK60-1) RoHS : Compliant | 825 | |||
| STDRIVE601 | STMicroelectronics | MOSFET and IGBT Gate Driver 350mA 3OUT HiLo Side NonInv 28Pin SOIC Tube (Alt: STDRIVE601) RoHS : Compliant | 448 | |||
| STTH6010WY | STMicroelectronics | Diode Ultra Fast Recovery Diode 1000V 60A 2Pin DO247 Tube (Alt: STTH6010WY) RoHS : Compliant | 150 | |||
 Braemac Americas-Symmetry | AX7DAF1-1296.0100T | Abracon Corporation | XTAL OSC XO 1.29601GHZ LVDS SMD RoHS : Compliant |
| 0 | |
| AFBC-Q3211-601-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| APXG6016GH-0060S | Abracon Corporation |
| 0 | |||
| LG16-0150D | Sensirion | Liquid Flow Sensor |
| 0 | ||
| AFBC-Q0402-601-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AFBC-Q0805G-601-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| P12060-1 | DB Unlimited | Piezo Bender |
| 0 | ||
| P822601 | Kyocera AVX Components | Standard 8-Band LTE Low Profile Cellular (35x9x3mm) - Antenna RoHS : Compliant |
| 0 | ||
| FXUB66.01.0345C | Taoglas Antenna Solutions | Maximus FXUB66 600-6000MHz Flexible PCB P&S Antenna, 345mm 1.37 Micro Coax SMA (M) |
| 0 | ||
| AMELA6012S-100MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACML-0402-601-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACML-0402H-601-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| FN990A40W06T060100 | Telit | FN990A40 M.2 - 45.00.016 |
| 0 | ||
| CAB.6012 | Taoglas Antenna Solutions | IpexMHFI(U.FL) to IpexMHFI(U.FL) 100mm 1.13Cable Assembly |
| 0 | ||
| TS.16.0111 | Taoglas Antenna Solutions | GPS/GLONASS/Galileo/BeiDou Active Antenna SMA Male |
| 0 | ||
 Chip-Germany GmbH | LM53601LQDSXRQ1 | Texas Instruments | RoHS : Compliant | 2,980 | ||
| TS8601.100 | Ritmer | 129 | ||||
| PMP60-13-1-B1-S | TT Electronics plc | 30 | ||||
| 222233660103 BFC233660103 | Vishay BCcomponents | 28 | ||||
| BFC233660103 | Vishay Intertechnologies | RoHS : Compliant | 28 | |||
| LEM260-1331-2 | Calmark | 28 | ||||
| VSSR1601-103JT | Vishay Intertechnologies | 10 | ||||
| MBRM560-13-F | Diodes Incorporated | RoHS : Compliant | 5 | |||
| BLM31BE601FN1L | Murata Manufacturing Co Ltd | RoHS : Compliant | 4 | |||
| 60.13.9.024.5070 | FINDER SpA | 3 | ||||
| PUP60-14-B1-S | Protek Power / ITE Power Supplies | 1 | ||||
| 172160-1 | TE Connectivity | RoHS : Compliant | 1 | |||
| CU8860 129422 | Becmer | 1 | ||||
| PUP60-16-B11 | Sennheiser Electronic GmbH & Co KG | 1 | ||||
| 1106013 | Phoenix Contact | 1 | ||||
 Component Electronics, Inc | SFR16S0001601JR500 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,800 | |
AM2960-1DC | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 480 | |||
| CMF-60-10K-1%-T-1B14 | Vishay Dale | IN STOCK SHIP TODAY |
| 186 | ||
| CIS51-1116-01 | Tech-Etch | IN STOCK SHIP TODAY | 128 | |||
| 929836-01-40 | 3M | IN STOCK SHIP TODAY |
| 83 | ||
| 1-640601-0 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant | 75 | |||
| 9741-060-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 60 | ||
| 8348-060-100 | Belden Inc | IN STOCK SHIP TODAY |
| 40 | ||
| K1601T-10.000000MHZ | MtronPTI | IN STOCK SHIP TODAY | 23 | |||
| CLT-106-01-F-D | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| AD601 | IN STOCK SHIP TODAY |
| 18 | |||
| 207601-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 9730-060-100 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
| DT60-1002D-128 | Delta Electronics Inc | IN STOCK SHIP TODAY | 1 | |||
| BT-6-01-NT | Richco | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 4-601046-01REV.B-16 | RAF Electronic Hardware | 0 | |||
| 4620-6010-SMODL=660-12 | RAF Electronic Hardware | 0 | ||||
| R4-10-20-601-20 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
| 20546601 | Essentra Components | P0.365,0.299 C0.302,0.235SILIC | 0 | |||
| 20591601 | Essentra Components | 716 UNF THREAD KNURLED CAPLDPE | 0 | |||
| A5-61-360-10 | Southco | 0 | ||||
| 4601 | Heyco | BRASS REDUCER PG7-PG9 | 0 | |||
| 4601-832-S | RAF Electronic Hardware | 0 | ||||
| 460175 | Essentra Components | 0 | ||||
| 50M060100D008B | Essentra Components | CHEESE SLOTTED SCREW, M6 X 1 T | 0 | |||
| 50M060100J020B | Essentra Components | HEX UNSLOTTED BOLT, M6 X 1 THR | 0 | |||
| 50M060100N035B | Essentra Components | PAN SLOTTED SCREW, M6 X 1 THRE | 0 | |||
| 50M060100P075 | Essentra Components | PAN PHILLIPS SCREW, M6 X 1 THR | 0 | |||
| 50M060100T008 | Essentra Components | SLOTTED THUMB SCREW, M6 X 1 TH | 0 | |||
| 550601310 | Avdel | RONDELLA CONTACT M6 CR3 | 0 | |||
 ECCO | 9800006014 | ITT Interconnect Solutions |
| 6,876 | ||
| 980-0006-014-MS | ITT Interconnect Solutions |
| 4,997 | |||
| 2170496011 | ITT Interconnect Solutions | 1,286 | ||||
| T3476013U | Amphenol Tuchel |
| 374 | |||
| T3476013 | Amphenol Tuchel |
| 374 | |||
| 031-0560-161 | ITT Interconnect Solutions |
| 261 | |||
| 031-0560-121 | ITT Interconnect Solutions |
| 197 | |||
| T3360130 | Amphenol Tuchel |
| 156 | |||
| 97-60-10P | Amphenol Industrial Operations |
| 87 | |||
| 97-60-10P | Amphenol Industrial Operations |
| 87 | |||
| 10-820046-01S | Amphenol Industrial Operations |
| 20 | |||
| 97-60-12P | Amphenol Industrial Operations |
| 10 | |||
| 97-60-12P | Amphenol Industrial Operations |
| 10 | |||
| M8372360114AR | Amphenol PCD |
| 4 | |||
| JANM83723/60-112AR | Amphenol PCD |
| 3 | |||
 FDH Electronics | W-6013-1750 | Whitmore/Wirenetics | Hook-Up Wire | 1,459 | ||
| R6013 | Brady Worldwide Inc | Harness Mgmt |
| 3 | ||
| M81714/60-16-01 | Amphenol PCD | Circular Conn | 1 | |||
| 10-538676-013 | Amphenol Aerospace | Backshells & Ac | 0 | |||
| 660-004NF16S6-01 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 660-012NF25H6-01 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 660-024B23S6-01 | Glenair Inc | Connector | 0 | |||
| 660-024NF09S6-01 | Glenair Inc | Connector | 0 | |||
| 660-024NF19H6-01 | Glenair Inc | Connector | 0 | |||
| 660-106ZRD103-2 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 660-108NFG04-10 | Glenair Inc | Connector | 0 | |||
| 660-108ZRH01-3 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 667-024NF25H6-01 | Glenair Inc | Connector | 0 | |||
| 732-8260-16 | TE Connectivity | Connector RoHS : Compliant |
| 0 | ||
| 770-012T601W1 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
 Flip Electronics | NSV60101DMR6T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 198,000 | |
| NB3H60113GH2MTR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 27,593 | ||
| NTSB60100CTT4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,440 | ||
| DSS16-01A | Littelfuse Inc | Stock RoHS : Compliant | 3,300 | |||
LPC3220FET296/01,5 | NXP Semiconductors | Stock RoHS : Compliant | 2,772 | |||
| HCPL-2601-520ME | Broadcom Limited | Stock, Ship Today |
| 2,000 | ||
| IDT601R-25ILF | Integrated Device Technology Inc | Stock | 1,965 | |||
| DF36012FYWV | Renesas Electronics Corporation | Stock | 1,704 | |||
| DF36014FYV | Renesas Electronics Corporation | Stock | 1,294 | |||
| RAJ306010ZGNP#AAN | Renesas Electronics Corporation | Stock | 1,258 | |||
| NTSB60100CT-1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,100 | ||
| CY8C6016BZI-F04 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 920 | ||
| RJK6014DPK-00#T0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 537 | |||
| HCPL-0601 | Broadcom Limited | Stock, Ship Today RoHS : Not Compliant |
| 517 | ||
| CM8064601465703S R14K | Altera Corporation | Stock | 10 | |||
 Pasternack Enterprises US | PE3360-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Female Cable 12 Inch Length Using RG8 Coax., Radio frequency assembly BNC male to BNC female cable 12 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female cable 12 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3360-12, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3360-12 is built with RG8 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3360-12 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female cable 12 inch length using RG8 coax. |
| 374 | |
| PE3FCA460-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC APC to SC APC, OS2 Single Mode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA460-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 12-fiber cable assembly is equipped with LC/APC to SC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA460-10M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 11 | ||
| PE3960-120 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG218/U, RF Cable Type: RG218, RF Cable Impedance: 50 Ohm, Length: 120 inches. LC Male to LC Male Cable 120 Inch Length Using RG218 Coax., Radio frequency assembly LC male to LC male cable 120 inch length using RG218 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. LC male to LC male cable 120 inch length using RG218 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with LC cable connection on one end and LC cable connection on the other. Our LC to LC cable assemblies have a male gender on end 1 and male on end 2. This LC to LC cable is a male to male coax assembly, PE3960-120, can also be known as a LC plug to LC plug cable assembly and will be shipped same-day as it is purchased. LC plug to LC plug cable assembly PE3960-120 is built with RG218 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to LC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency LC male to LC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. LC plug to LC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to LC cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC male to LC male cable 120 inch length using RG218 coax. |
| 6 | ||
| PE3C6016 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male to Trimmed Lead Cable Using RG223 Coax., Radio frequency assembly SMA male to trimmed lead cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to trimmed lead cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a male to sexless coax assembly, PE3C6016, can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA plug to trimmed lead sexless cable assembly PE3C6016 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6016 can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to trimmed lead cable using RG223 coax. | 0 | |||
| PE3C7860-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860-12, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE39601LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SHV Plug to SMA Male Cable 36 Inch Length Using RG223 Coax, LF Solder., Radio frequency assembly SHV plug to SMA male cable 36 inch length using RG223 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to SMA male cable 36 inch length using RG223 coax, LF solder, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SMA cable connection on the other. Our SHV to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE39601LF-36 can also be known as a SHV male to SMA plug cable assembly and will be shipped same-day as it is purchased. SHV male to SMA plug cable assembly PE39601LF-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39601LF-36 can also be used in the other direction and will be SMA male to SHV plug cable assembly if the opposite connectivity is required. SHV male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SMA cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to SMA male cable 36 inch length using RG223 coax, LF solder. |
| 0 | ||
| PE3C100060-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. 2.92mm Male to 2.92mm Male Low Loss Test Cable 150 CM Length Using PE-TC154 Coax., Pasternack’s PE3C100060-150CM low loss test 2.92mm male to 2.92mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100060-150CM can also be known as a low loss test 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100060-150CM RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C100060-150CM 2.92mm plug to 2.92mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 59.06-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4060-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug to SMA Male Right Angle Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to SMA male right angle cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male right angle cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and right angle SMA cable connection on the other. Our MMBX to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4060-18, can also be known as a MMBX male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4060-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4060-18 can also be used in the other direction and will be right angle SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male right angle cable 18 inch length using RG316-DS coax. |
| 0 | ||
| PE3C6019 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. 2.4mm Male to SMP Female Cable Using PE-P086 Coax., Radio frequency assembly 2.4mm male to SMP female cable using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to SMP female cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMP cable connection on the other. Our 2.4mm to SMP cable assemblies have a male gender on end 1 and female on end 2. PE3C6019 can also be known as a 2.4mm plug to SMP jack cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMP jack cable assembly PE3C6019 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency 2.4mm male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6019 can also be used in the other direction and will be SMP female to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMP cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMP female cable using PE-P086 coax. | 0 | |||
| PE3C7960-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7960-100CM, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7960-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7960-100CM can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C9601 | Pasternack Enterprises | 0 | ||||
| PE3W03601 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using PE-SR405FLJ Coax. PE3W03601 is a SMA male to MCX plug cable using PE-SR405FLJ coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03601 SMA male to MCX plug cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE6011-50 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: TNC, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Power: 0.5 Watt. 0.5 Watt RF Load Up to 1,000 MHz with TNC Male Nickel Plated Brass. PE6011-50 0.5 Watts RF load (also known as termination or dummy load) has a TNC connector that is male. This Pasternack 0.5 watt TNC male load / termination is rated for a maximum frequency of 1 GHz. Our TNC male termination load is a rf load termination with a 50 Ohm impedance. This TNC load / coax terminator is manufactured with no chain and brass body. PE6011-50 0.5 watt TNC male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our TNC male 0.5 watt termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE36012LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using PE-C195 Coax, RoHS. PE36012LF is a N male to N male cable using PE-C195 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36012LF N male to N male cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE38601/HS/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to SMA Male Right Angle Cable Using RG316 Coax with HeatShrink and 180 Deg. Clock. PE38601/HS/PH180 is a reverse polarity SMA male right angle to SMA male right angle cable using RG316 coax. This Pasternack reverse polarity SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38601/HS/PH180 SMA reverse polarity male right angle to SMA male right angle cable assembly is constructed with RG316 coax. | 0 | |||
 TE Connectivity | 1060-16-0144 | TE Connectivity | PIN, SF, SIZE 16, 14-18, AU/SN Terminal Type: Pin Wire Size: 18 – 14 AWG Wire Size: .75 – 2 mm² Interface Plating: Gold (Au) Primary Locking Feature: Integrated in Housing Pin 18 – 14 AWG .75 – 2 mm² Gold (Au) | Deutsch Connector Stamped And Formed Contacts - Reel | Part Number: 1060-16-0144 | Internal Number: 1060-16-0144 | Alias Number: ZPF000000000131903 | TE Connectivity RoHS : Compliant |
| 44,000 | |
| 60196-2 | TE Connectivity | 187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 60196-2 | Internal Number: 60196-2 | TE Connectivity RoHS : Compliant |
| 23,315 | ||
| 66601-9 | TE Connectivity | III+ SKT,18-14,TIN,LP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 18 – 14 AWG Wire Size: .8 – 2 mm² Tin (Sn) Socket 18 – 14 AWG | Connector Contact | Part Number: 66601-9 | Internal Number: 66601-9 | TE Connectivity RoHS : Compliant |
| 4,877 | ||
| 1SNG601011R0000 | TE Connectivity | EP-SG-M12-GR-D Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Standard Threaded Primary Product Material: PA 6 Clamping Diameter Range: 3 – 6.5 mm Outer Thread Type: Metric Cable Gland Standard Threaded PA 6 3 – 6.5 mm | Plastic Cable Glands Without Locknut | Part Number: 1SNG601011R0000 | Internal Number: 1SNG601011R0000 | TE Connectivity RoHS : Compliant |
| 3,919 | ||
| 794760-1 | TE Connectivity | 06P UMNL CAP HSG WHTE,PAN MNT Number of Positions: 6 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Panel Standard Rectangular Connector | 6 Cap Housing Crimp | Part Number: 794760-1 | Internal Number: 794760-1 | TE Connectivity RoHS : Compliant |
| 3,749 | ||
| 356018RJT | TE Connectivity | 3560 18R 5% Resistance Value: 18 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 6 W Surface Mount Resistor | 18 Ω Thick Metal Film Power Resistor 5 % | Part Number: 356018RJT | Internal Number: 8-2176407-6 | TE Connectivity RoHS : Compliant |
| 1,936 | ||
| 3560100RJT | TE Connectivity | 3560 100R 5% Resistance Value: 100 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 6 W Surface Mount Resistor | 100 Ω Thick Metal Film Power Resistor 5 % | Part Number: 3560100RJT | Internal Number: 9-2176407-5 | TE Connectivity RoHS : Compliant |
| 1,927 | ||
| 356013KFT | TE Connectivity | 3560 13K 1% Resistance Value: 13K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Power Rating: 6 W Surface Mount Resistor | 13K Ω Thick Metal Film Power Resistor 1 % | Part Number: 356013KFT | Internal Number: 2176407-1 | TE Connectivity RoHS : Compliant |
| 1,870 | ||
| 8-32060-1 | TE Connectivity | TERMINAL,PIDG SPD 16-14 10 Spade Terminal Type: Spade Tongue Terminal Wire Size: 16 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Spade Tongue Terminal 16 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32060-1 | Internal Number: 8-32060-1 | Alias Number: AMPS-8-0032060-1 | TE Connectivity RoHS : Compliant |
| 1,214 | ||
| FN9260-1-07 | TE Connectivity | FN9260-1-07 Current Rating (Max): 1 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: Litz Wire Leakage Current (Max) (120VAC, 60Hz): 310 µA Fn9260 / Fn9261 Power Entry Modules With Emc Filter – General-Purpose Solution With Fuse Option | 1 A Filtered 180 µA Litz Wire | Part Number: FN9260-1-07 | Internal Number: 822583-SF | FN9260-1-07 Current Rating (Max): 1 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: Litz Wire Leakage Current (Max) (120VAC, 60Hz): 310 µA Fn9260 / Fn9261 Power Entry Modules With Emc Filter – General-Purpose Solution With Fuse Option | 1 A Filtered 180 µA Litz Wire | Part# FN9260-1-07 RoHS : Compliant |
| 109 | ||
| 207601-1 | TE Connectivity | METRIMATE,STR REL KIT,9P Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: PA 66 Number of Positions: 9 Operating Temperature (Max): 130 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 207601-1 | Internal Number: 207601-1 | PA 66 | TE Connectivity RoHS : Compliant |
| 56 | ||
| T1230160121-000 | TE Connectivity | H16B-TSH-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1230160121-000 | Internal Number: T1230160121-000 | TE Connectivity RoHS : Compliant |
| 33 | ||
| T1460160121-000 | TE Connectivity | H16B-SDR-BO-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1460160121-000 | Internal Number: T1460160121-000 | TE Connectivity RoHS : Compliant |
| 23 | ||
| T1330160129-000 | TE Connectivity | H16B-TSH-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1330160129-000 | Internal Number: T1330160129-000 | TE Connectivity RoHS : Compliant |
| 11 | ||
| FN2660-15-05-C0909 | TE Connectivity | FN2660-15-05-C0909 Current Rating (Max): 15 A Filtering Requirements: Unfiltered Leakage Current (Max) (250VAC, 50Hz): 350 µA Output Termination Type: FASTON Leakage Current (Max) (120VAC, 60Hz): 200 µA Fn2660 | 15 A Unfiltered 350 µA FASTON | Part Number: FN2660-15-05-C0909 | Internal Number: 821805-SF | TE Connectivity RoHS : Compliant |
| 1 | ||
 Teledyne HiRel | 5962-8960101MSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| 5962-8875601MEA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
5962-9218601MSA | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
5962-88656013A | Teledyne HiRel | REGISTER, 9-BIT NONINVERTING RoHS : Not Compliant | 0 | |||
| 7704601CA | Teledyne HiRel | NAND GATE, QUAD 2-INPUT, WITH SCHMITT TRIGGERS RoHS : Not Compliant | 0 | |||
5962-9230601MYA | Teledyne HiRel | COUNTERHIFT REGISTER, 4-STAGE RoHS : Not Compliant | 0 | |||
| 7704601DA | Teledyne HiRel | NAND GATE, QUAD 2-INPUT, WITH SCHMITT TRIGGERS RoHS : Not Compliant | 0 | |||
| 5962-8955601SA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9153601MYA | Teledyne HiRel | FLIP-FLOP, D-TYPE, TRIPLE RoHS : Not Compliant | 0 | |||
5962-9217601MRA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8865601KA | Teledyne HiRel | REGISTER, 9-BIT NONINVERTING RoHS : Not Compliant | 0 | |||
5962-89601012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8875601M2A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-9217601MSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218601MRA | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C0805X7R160-104KNP | VENKEL LTD | Chip Capacitor;0805;X7R;16V;0.1uF;�10% RoHS : Compliant | 180,860 | ||
C0603X7R160-154KNE | VENKEL LTD | Chip Capacitor;0603;X7R;16V;0.15uF;�10% RoHS : Compliant | 39,200 | |||
| C0603X5R160-106KNP | VENKEL LTD | Chip Capacitor;0603;X5R;16V;10uF;�10% RoHS : Compliant | 24,000 | |||
| PWCR0402-AK-5601DT | VENKEL LTD | Pulse Withstanding CR;0402;1/5W;�100PPM;5.6K;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-RK-3601FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;3.6K;�1% RoHS : Compliant | 0 | |||
| PWCR1206-VK-5601FT | VENKEL LTD | Pulse Withstanding CR;1206;1/2W;�100PPM;5.6K;�1% RoHS : Compliant | 0 | |||
| C0603Y5V160-184ZNP | VENKEL LTD | Chip Capacitor;0603;Y5V;16V;0.18uF;+80-20% RoHS : Compliant | 0 | |||
| C0805C0G601-221GNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;600V;220pF;�2% RoHS : Compliant | 0 | |||
| C0805C0G601-680GNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;600V;68pF;�2% RoHS : Compliant | 0 | |||
| C0805C0G601-821KNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;600V;820pF;�10% RoHS : Compliant | 0 | |||
| C0805X7R601-681KNP | VENKEL LTD | HV Chip Capacitor;0805;X7R;600V;680pF;�10% RoHS : Compliant | 0 | |||
| C1206X7R601-271KNE | VENKEL LTD | HV Chip Capacitor;1206;X7R;600V;270pF;�10% RoHS : Compliant | 0 | |||
| C1210C0G601-100JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;600V;10pF;�5% RoHS : Compliant | 0 | |||
| C1210C0G601-182JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;600V;1800pF;�5% RoHS : Compliant | 0 | |||
| C1210C0G601-470JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;600V;47pF;�5% RoHS : Compliant | 0 | |||
 Wuhan P&S | TEMD6010FX01 | Vishay Intertechnologies | Ambient Light Sensor RoHS : Compliant |
| 99,000 | |
| VS-E5PH6012L-N3 | Vishay Intertechnologies | Hyperfast Rectifier, 60A,1200V RoHS : Compliant |
| 89,000 | ||
| ILHB1206ER601V | Vishay Intertechnologies | High Current Multilayer Ferrite Beads RoHS : Compliant |
| 66,000 | ||
| VS-HFA15TB60-1-M3 | Vishay Intertechnologies | Ultrafast Soft Recovery Diode, 600V, 15A RoHS : Compliant |
| 1,000 | ||
| PR02000205601JA100 | Vishay Intertechnologies | PR02 5% A1 5K6 RoHS : Compliant |
| 1,000 | ||
| STBR6012W | STMicroelectronics | - RoHS : Compliant |
| 20 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand