 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
640L-R20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Bisco Industries | 640L0207P | Helical Wire Inc | 50 | |||
| 640L0138 | Helical Wire Inc | 3 | ||||
 TME | 71918-640LF | Amphenol Corporation | 71918-640LF |
| 7,140 | |
| 73542-640LF | Amphenol Corporation | Connector: PCB to PCB; female; data; PIN: 80; straight; 1A; 800V |
| 467 | ||
| 72V3640L7-5PFGI | Renesas Electronics Corporation | 72V3640L7-5PFGI RoHS : Compliant |
| 36 | ||
| CAA573X7T2J155M640LH | TDK Corporation | Capacitor: ceramic; MLCC; 1.5uF; 630V; X7T; ±20%; SMD; 2220; 330mm RoHS : Compliant |
| 0 | ||
| UEB6-40L/B401N | Xiamen Hongfa Electroacoustic Co.,Ltd. | Circuit breaker; 230VAC; Inom: 40A; Poles: 1+N; Charact: B; 4.5kA |
| 0 | ||
| UEB6-40L/B061N | Xiamen Hongfa Electroacoustic Co.,Ltd. | Circuit breaker; 230VAC; Inom: 6A; Poles: 1+N; Charact: B; 4.5kA |
| 0 | ||
| UEB6-40L/B101N | Xiamen Hongfa Electroacoustic Co.,Ltd. | Circuit breaker; 230VAC; Inom: 10A; Poles: 1+N; Charact: B; 4.5kA |
| 0 | ||
| UEB6-40L/C321N | Xiamen Hongfa Electroacoustic Co.,Ltd. | Circuit breaker; 230VAC; Inom: 32A; Poles: 1+N; Charact: C; 4.5kA |
| 0 | ||
| CAA573X7S2A476M640LH | TDK Corporation | Capacitor: ceramic; MLCC; 47uF; 100V; X7S; ±20%; SMD; 2220; 330mm RoHS : Compliant |
| 0 | ||
| CYPD4236-40LQXI | Infineon Technologies AG | IC: USB interface |
| 0 | ||
| CAA573C0G3A993J640LH | TDK Corporation | Capacitor: ceramic; MLCC; 99nF; 1kV; C0G (NP0); ±5%; SMD; 2220; 330mm RoHS : Compliant |
| 0 | ||
| CAA573X7T2V335M640LH | TDK Corporation | Capacitor: ceramic; MLCC; 3.3uF; 350V; X7T; ±20%; SMD; 2220; 330mm RoHS : Compliant |
| 0 | ||
| CYPD4236-40LQXQT | Infineon Technologies AG | IC: USB interface RoHS : Compliant |
| 0 | ||
| CYAC1126-40LQXIT | Infineon Technologies AG | IC: USB interface RoHS : Compliant |
| 0 | ||
| UEB6-40L/C161N | Xiamen Hongfa Electroacoustic Co.,Ltd. | Circuit breaker; 230VAC; Inom: 16A; Poles: 1+N; Charact: C; 4.5kA |
| 0 | ||
 Ameya Holding Limited | TN2640LG TN2640LG | Microchip Technology Inc | 1,690 | |||
 ComSIT USA | EN29LV640L90TCP | Eon Silicon Solution Inc | Flash, 4MX16, 90ns, PDSO48 RoHS : Compliant | 33,546 | ||
IDT72V3640L10PF | Integrated Device Technology Inc | 1,024 X 36, 3.3V HIGH-DENSITY SUPERSYNC II 36-BIT FIFO FIFO, 1KX36, 6.5ns, Synchronous, CMOS, PQFP128 RoHS : Not Compliant | 6 | |||
 NexGen Digital | CYPD4226-40LQXIT | Cypress Semiconductor | RoHS : Compliant | 7 | ||
 Richardson RFPD | LT1640LIS8#TRPBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | |
| LT1640LCS8#TRPBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | ||
| LT1640LCN8#PBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | ||
| LT1640LIN8#PBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | ||
| LT1640LIS8#PBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | ||
| LT1640LCS8#PBF | Analog Devices Inc | Hot Swap Controller 1-CH -10V N-Channel Negative H RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | EN29LV640L-90TCP | INSTOCK | 7,288 | |||
| EN29LV640L-90TCP | Eon Silicon Solution Inc | INSTOCK RoHS : Compliant | 960 | |||
LT1640LIS8 | Linear Technology | INSTOCK RoHS : Not Compliant | 100 | |||
| SACIC0640LGG | INSTOCK | 84 | ||||
| TB0640L-13-F | Diodes Incorporated | INSTOCK RoHS : Compliant | 54 | |||
| TE505S16-40LC | TRI | INSTOCK | 36 | |||
 Avnet Asia | 71918-640LF | Amphenol Corporation | Conn Ejector Header HDR 40 POS 2.54mm Solder ST Thru-Hole (Alt: 71918-640LF) RoHS : Compliant | 0 | ||
| TB0640L-13-F | Diodes Incorporated | (Alt: TB0640L-13-F) RoHS : Compliant | 0 | |||
| SIHF640L-GE3 | Vishay Intertechnologies | MOSFET N-CHANNEL 200V (Alt: SIHF640L-GE3) RoHS : Compliant | 0 | |||
 Avnet Silica | TP2640LG-G | Microchip Technology Inc | (Alt: TP2640LG-G) RoHS : Compliant | 0 | ||
| TN2640LG-G | Microchip Technology Inc | (Alt: TN2640LG-G) RoHS : Compliant | 0 | |||
| TB0640L-13-F | Diodes Incorporated | (Alt: TB0640L-13-F) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | ICO-640-LGT | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 67 | |
| LT1640LIS8#TRPBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 61 | ||
| LT1640LIS8#TR | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
 EBV Elektronik | TP2640LG-G | Microchip Technology Inc | (Alt: TP2640LG-G) RoHS : Compliant | 0 | ||
| TN2640LG-G | Microchip Technology Inc | (Alt: TN2640LG-G) RoHS : Compliant | 0 | |||
| IRF9640LPBF | Vishay Intertechnologies | (Alt: IRF9640LPBF) RoHS : Compliant | 0 | |||
| SIHF640L-GE3 | Vishay Intertechnologies | (Alt: SIHF640L-GE3) RoHS : Compliant | 0 | |||
| CYPD4236-40LQXI | Infineon Technologies AG | (Alt: SP005659043) RoHS : Compliant | 0 | |||
| CYPD4126-40LQXI | Infineon Technologies AG | (Alt: SP005659009) RoHS : Compliant | 0 | |||
| CYPD4226-40LQXIT | Infineon Technologies AG | USB Interface USB TypeC and Power Delivery PD Controller USB 30 27 V 55 V QFNEP (Alt: SP005659041) RoHS : Compliant | 0 | |||
| CYAC1126-40LQXIT | Infineon Technologies AG | (Alt: SP005656453) RoHS : Compliant | 0 | |||
| CYPD5126-40LQXIT | Infineon Technologies AG | USB TypeC Controller Single Port USB PD30 40Pin QFN TR (Alt: SP005659069) RoHS : Compliant | 0 | |||
 Flip Electronics | CYRF6986-40LTXC | Infineon Technologies AG | Stock, Ship Today |
| 50,230 | |
| CYRF7936-40LTXC | Infineon Technologies AG | Stock, Ship Today |
| 31,562 | ||
| CYPD4226-40LQXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 7,838 | ||
| CYPD4226-40LQXIT | Infineon Technologies AG | Stock RoHS : Compliant | 7,838 | |||
| CYPD4236-40LQXQ | Infineon Technologies AG | Stock, Ship Today |
| 5,966 | ||
| CYPD4236-40LQXI | Infineon Technologies AG | Stock, Ship Today |
| 5,898 | ||
| CYPD4126-40LQXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 510 | ||
 Maritex | UF640L-TQ2-R | Unisonic Technologies Co Ltd | MOSFETs; UF640L-TQ2-R; UTC; 18 A; 180 m? RoHS : Compliant |
| 495 | |
| UF640L-TF1-T | Unisonic Technologies Co Ltd | MOSFETs; UF640L-TF1-T; UTC |
| 470 | ||
 Pasternack Enterprises US | PE3C5640LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder. | 100 | ||
| PE3C5640LF-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.4mm Male to 2.4mm Male Cable 6 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-6 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Male Cable 18 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-18 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Male Cable 36 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-36 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3W17640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Cable Using LMR-240 Coax, LF Solder. PE3W17640LF is a N male right angle to BNC male cable using LMR-240 coax. This Pasternack N male right angle to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17640LF N male right angle to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE37640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W15640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SHV Plug to SMA Male Cable Using RG223 Coax, LF Solder. PE3W15640LF is a SHV plug to SMA male cable using RG223 coax. This Pasternack SHV plug to SMA male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SMA for connector 2. Our plug SHV to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15640LF SHV plug to SMA male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3C1640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using PE-P300LL Coax, LF Solder. PE3C1640LF is a N female bulkhead to SMA male cable using PE-P300LL coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1640LF N female bulkhead to SMA male cable assembly is constructed with PE-P300LL coax. | 0 | |||
| PE3W03640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using PE-SR402FL Coax, LF Solder. PE3W03640LF is a SMA male to N male cable using PE-SR402FL coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03640LF SMA male to N male cable assembly is constructed with PE-SR402FL coax. | 0 | |||
| PE3C3640LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50. 3.5mm Male to 3.5mm Female Cable Using PE-SR402FL Coax, LF Solder, RoHS. PE3C3640LF is a 3.5mm male to 3.5mm female cable using PE-SR402FL coax. This Pasternack 3.5mm male to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to female 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C3640LF 3.5mm male to 3.5mm female cable assembly is constructed with PE-SR402FL coax. | 0 | |||
 Win Source Electronics | CYRF6936-40LTXC | Cypress Semiconductor | IC RF TXRX+MCU ISM>1GHZ 40-VFQFN / RF Transceiver GFSK 2.5V/3.3V 40-Pin QFN EP Tray RoHS : Compliant |
| 27,400 | |
| CYPD4226-40LQXIT | Cypress Semiconductor | CCG4 RoHS : Compliant |
| 23,980 | ||
| CYPD5126-40LQXI | Infineon Technologies AG | IC MCD CCG5C WIRED 40-QFN |
| 12,500 | ||
| CYPD5126-40LQXIT | Infineon Technologies AG | IC MCD CCG5C WIRED 40-QFN RoHS : Compliant |
| 12,500 | ||
| CYAC1126-40LQXI | Infineon Technologies AG | ACG1F |
| 5,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand