 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
71L-S14-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | BD71L4LG-1GTR | ROHM Semiconductor | IC: supervisor circuit; open drain; Active logical level: low RoHS : Compliant |
| 17,912 | |
| 4816P-3-331/471LF | Bourns Inc | Resistor network: Y; ±2%; 80mW; SMD; -55÷125°C |
| 4,000 | ||
| 4612X-102-471LF | Bourns Inc | Resistor network: Y; 470Ω; ±2%; No.of resistors: 6; 300mW; THT RoHS : Compliant |
| 1,625 | ||
| WSL36371L000FEA | Vishay Intertechnologies | Resistor: metal strip; 1mΩ; current shunt,sensing; SMD; 3637; 3W RoHS : Compliant |
| 0 | ||
| WSL36371L000FEB | Vishay Intertechnologies | Resistor: metal strip; 1mΩ; current shunt,sensing; SMD; 3637; 3W RoHS : Compliant |
| 0 | ||
| WSL36371L500FEA | Vishay Intertechnologies | Resistor: metal strip; 1.5mΩ; current shunt,sensing; SMD; 3637; 3W RoHS : Compliant |
| 0 | ||
| B32671L1122J289 | TDK Corporation | Capacitor: polypropylene; 1.2nF; 1600VDC; 600VAC; 13x9x4mm; THT RoHS : Compliant |
| 0 | ||
| B32671L6563J189 | TDK Corporation | Capacitor: polypropylene; 56nF; 630VDC; 250VAC; 13x12x6mm; THT; ±5% RoHS : Compliant |
| 0 | ||
| B32671L9682K289 | TDK Corporation | Capacitor: polypropylene; 6.8nF; 1000VDC; 250VAC; 13x9x4mm; THT RoHS : Compliant |
| 0 | ||
| DMC3071LVT-7 | Diodes Incorporated | Transistor: N/P-MOSFET; unipolar; 30V; 4.6A; 1.1W; TSOT26 RoHS : Compliant |
| 0 | ||
| EEUFC1E471L | Panasonic Electronic Components | Capacitor: electrolytic; low ESR; THT; 470uF; 25VDC; Ø8x20mm; ±20% RoHS : Compliant |
| 0 | ||
| EEUFR1J271L | Panasonic Electronic Components | Capacitor: electrolytic; low ESR; THT; 270uF; 63VDC; Ø10x25mm; ±20% RoHS : Compliant |
| 0 | ||
| 093W1171LN08 | FATH | Floor bracket |
| 0 | ||
| B32671L1222K189 | TDK Corporation | Capacitor: polypropylene; 2.2nF; 1600VDC; 600VAC; 13x11x5mm; THT RoHS : Compliant |
| 0 | ||
| B32671L1272J289 | TDK Corporation | Capacitor: polypropylene; 2.7nF; 1600VDC; 600VAC; 13x11x5mm; THT RoHS : Compliant |
| 0 | ||
 Avnet Americas | IHSM4825RE471L | Vishay Intertechnologies | IHSM-4825 470 15% RC2 - Tape and Reel (Alt: IHSM4825RE471L) RoHS : Not Compliant |
| 17,250 | |
| 4608X-102-471LF | Bourns Inc | - Bulk (Alt: 4608X-102-471LF) RoHS : Compliant |
| 5,798 | ||
| 4610X-104-331/471L | Bourns Inc | - Bulk (Alt: 4610X-104-331/471L) RoHS : Compliant |
| 5,111 | ||
| EEF-GX0D471L | Panasonic Electronic Components | - Tape and Reel (Alt: EEF-GX0D471L) RoHS : Compliant |
| 3,500 | ||
| 4816P-T02-471LF | Bourns Inc | - Rail/Tube (Alt: 4816P-T02-471LF) RoHS : Compliant |
| 1,777 | ||
| IHD3EB471L | Vishay Intertechnologies | - Bulk (Alt: IHD3EB471L) RoHS : Compliant |
| 190 | ||
| 3329P-1-471LF | Bourns Inc | - Rail/Tube (Alt: 3329P-1-471LF) RoHS : Compliant |
| 0 | ||
| 4420P-2-271LF | Bourns Inc | - Tape and Reel (Alt: 4420P-2-271LF) RoHS : Compliant |
| 0 | ||
| 4609X-104-331/471L | Bourns Inc | - Bulk (Alt: 4609X-104-331/471L) RoHS : Compliant |
| 0 | ||
| 4612X-104-331/471L | Bourns Inc | - Bulk (Alt: 4612X-104-331/471L) RoHS : Compliant |
| 0 | ||
| 4613X-101-471LF | Bourns Inc | Res Thick Film NET 470Ohm 2% 1.63W ?100ppm/?C Bussed Conformal 13-Pin SIP Thru-Hole Bulk - Bulk (Alt: 4613X-101-471LF) RoHS : Compliant |
| 0 | ||
| B57871L0303H000 | TDK Corporation | L871/30K/H 3% - Bulk (Alt: B57871L0303H000) RoHS : Compliant |
| 0 | ||
| ARC6-08-27.1-LU-LU-3-1 | Samtec Inc | - Bulk (Alt: ARC6-08-27.1-LU-LU-3-1) RoHS : Compliant |
| 0 | ||
| MS3471L12-10SX-C | Conesys | - Bulk (Alt: MS3471L12-10SX-C) RoHS : Not Compliant | 0 | |||
| MS3471L14-18S | Conesys | - Bulk (Alt: MS3471L14-18S) RoHS : Not Compliant | 0 | |||
 Newark | 4610X-104-331/471L | Bourns Inc | Res, Net, Dual Term, 330R/470R, Sip-10; Resistance R1:330Ohm; Product Range:4600X Series; Resistance R2:470Ohm; No. Of Elements:16Elements; Network Circuit Type:Dual Terminator; Resistor Case/Package:Sip; No. Of Pins:10Pins Rohs Compliant: Yes RoHS : Compliant |
| 8,092 | |
| B32671L0472J000 | TDK Corporation | Cap, 4700Pf, 1 Kv, 5%, Pp; |Tdk B32671L0472J000 RoHS : Compliant |
| 6,100 | ||
| B32671L1332J000 | TDK Corporation | Cap, 3300Pf, 1.6 Kv, 5%, Pp; |Tdk B32671L1332J000 RoHS : Compliant |
| 3,726 | ||
| B32671L1122J000 | TDK Corporation | Cap, 1200Pf, 1.6 Kv, 5%, Pp; |Tdk B32671L1122J000 RoHS : Compliant |
| 3,315 | ||
| EEUFC1E471L | Panasonic Electronic Components | Cap Alu Elec, 470Uf, 25V, ±20%; |Panasonic EEUFC1E471L RoHS : Compliant |
| 2,798 | ||
| 4610X-104-331/471L | Bourns Inc | Resistor N/W, Dual, 330R/470R, 2%, Sip; |Bourns, Inc. 4610X-104-331/471L RoHS : Compliant |
| 2,647 | ||
| B32671L1272J289 | TDK Corporation | Film Capacitor, 2700Pf, 1.6Kv, Radial; |Tdk B32671L1272J289 RoHS : Compliant |
| 1,610 | ||
| B32671L1272J289 | TDK Corporation | Film Capacitor, 2700Pf, 1.6Kv, Radial; |Tdk B32671L1272J289 RoHS : Compliant |
| 1,610 | ||
| MAF1608GAD471LTAH0 | TDK Corporation | Ferrite Bead, 0603, 1.6A; |Tdk MAF1608GAD471LTAH0 RoHS : Compliant |
| 1,210 | ||
| MAF1608GAD471LTAH0 | TDK Corporation | Ferrite Bead, 0603, 1.6A; |Tdk MAF1608GAD471LTAH0 RoHS : Compliant |
| 1,210 | ||
| 4116R-1-271LF | Bourns Inc | Nw Res Fixed, 270R, Isolated, 8Resistors; |Bourns, Inc. 4116R-1-271LF RoHS : Compliant |
| 1,128 | ||
| 4816P-T02-471LF | Bourns Inc | Resistor, Bus Res N/W 15, 470Ohm, 2%, Sm; |Bourns, Inc. 4816P-T02-471LF RoHS : Compliant |
| 44 | ||
| 4816P-T02-471LF | Bourns Inc | Resistor, Bus Res N/W 15, 470Ohm, 2%, Sm; |Bourns, Inc. 4816P-T02-471LF RoHS : Compliant |
| 44 | ||
| FOA-571-LGR | L-com Inc | Fiber Optic Adapter, Lime Green; |L-Com FOA-571-LGR RoHS : Compliant |
| 32 | ||
| KP687, 1LT | Krylex | Cleaner, Adhesive Remover, 1L Can; |Krylex KP687, 1LT RoHS : Not Compliant |
| 1 | ||
 RS | 4310R-101-471LF | Bourns Inc | RESISTOR, 470 OHMS, 1.25 W, 2 %, 100 V (MAX.), 100 PPM/ DEGC, SIP RoHS : Compliant |
| 1,531 | |
| EEU-FM1E471L | Panasonic Electronic Components | CAPACITOR, ALUM ELECTROLYTIC, CAP 470 UF, TOL 20%,VOL-RTG 25 VDC, RADIAL,8X20,BULK |
| 1,003 | ||
| 4606X-101-471LF | Bourns Inc | RESISTOR, 470 OHMS, 0.75 W, 2 %, 100 V (MAX.), 100 PPM/ DEGC, SIP RoHS : Compliant |
| 690 | ||
| 4610X-101-471LF | Bourns Inc | RESISTOR, 470 OHMS, 1.25 W, 2 %, 100 V (MAX.), 100 PPM/ DEGC, SIP RoHS : Compliant |
| 270 | ||
| EEU-FR1E471L | Panasonic Electronic Components | CAPACITOR, ALUM ELECTROLYTIC, CAP 470 UF, TOL 20%,VOL-RTG 25 VDC, RADIAL,8X20,BULK |
| 258 | ||
| 4605X-101-471LF | Bourns Inc | RESISTOR, THICK FILM, NETWORKS & ARRAYS,5 PINS,470 OHM,2% RoHS : Compliant |
| 200 | ||
| 4609X-101-471LF | Bourns Inc | RESISTOR,470 OHMS,1.3 W,2 %,100 V (MAX.),100 PPM/ DEGC RoHS : Compliant |
| 190 | ||
| 4608X-102-271LF | Bourns Inc | RESISTOR,270 OHMS,1 W,2 %,100 V (MAX.),100 PPM/ DEGC RoHS : Compliant |
| 149 | ||
| 371LN | T&B Fittings | CASE HARDENED STEEL LOCKNUT, 3/4", FOR RIGID/IMC CONDUIT |
| 2 | ||
| 71L36-03-2-04N | Grayhill Inc | KEY SWITCH, DP4T, 4 POSITION, NON-SHORTING, ON-ON-ON-ON, 250MA, 30VDC, SOLDER RoHS : Compliant |
| 2 | ||
| 5471L SL005 | Alpha Wire | MULTICONDUCTOR, 24AWG, 1C, 300V, FOIL, LSZH, XTRA-GUARD 1 SERIES |
| 1 | ||
| 3329P-1-471LF | Bourns Inc | TRIMMER - 1/4IN RD ST CERMET |
| 0 | ||
| 4420P-2-271LF | Bourns Inc | RNET-THK FILM SM WIDE BODY RoHS : Compliant |
| 0 | ||
| TILA57-1L-BL-FW (RIL-48234264|TILA57-1L-BL-FW|TILA571LBLFW) | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| TIGK57-1L-BL-FN (TGG-51947434|TIGK57-1L-BL-FN|TIGK571LBLFN) | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
 Bisco Industries | MS21071L08 | PAOLO ASTORI spa | 23,558 | |||
| MS21071L06 | PAOLO ASTORI spa | 21,052 | ||||
| MS21071L3 | PAOLO ASTORI spa | 6,438 | ||||
| MS21071L3 | MS Nuts | 136 | ||||
| 1A7857-1 LESS TESTING | 101 | |||||
| NAS1330H4K271L | Sherex / Atlas | 50 | ||||
| MS21071L4 | PAOLO ASTORI spa | 39 | ||||
| NAS1330H4K271L | NAS RIVET NUTS | 29 | ||||
| MS21071L04 | MS Nuts | 12 | ||||
| MS21071L04 | Republic Electronics Corp | 12 | ||||
| MS21071L4 | MS Nuts | 8 | ||||
| MS21071L6 | MS Nuts | 7 | ||||
| MS21071L08 | MS Nuts | 5 | ||||
| NAS1227-1L | NAS Bolts | 5 | ||||
| MS21071L4 | Multiple Manufacturers | 4 | ||||
 Rochester Electronics | LA42071L-E | onsemi | Audio Output for TV Application 5W Power Ampilfier RoHS : Compliant |
| 63,000 | |
| SMBZ1477-1LT1G | onsemi | SMBZ1477 - Zener Regulating Diode, 0.225W RoHS : Compliant |
| 15,000 | ||
| HMC571LC5 | Analog Devices Inc | RF - Other Downconverter Radar Down Converter 32-QFN Cut Tape RoHS : Compliant |
| 460 | ||
LM2671LD-ADJ | Texas Instruments | Switching Regulator, Voltage-mode, 0.5A, 400kHz Switching Freq-Max, DMOS, PDSO16 RoHS : Not Compliant |
| 5,000 | ||
PT6671L | Texas Instruments | Switching Regulator, Voltage-mode, 4A, 300kHz Switching Freq-Max, Hybrid RoHS : Not Compliant |
| 12 | ||
| LM2671LD-5.0/NOPB | National Semiconductor Corporation | Switching Regulator/Controller, Voltage-mode, 0.5A, 275kHz Switching Freq-Max, PDSO16 RoHS : Compliant |
| 290 | ||
| LM3671LC-1.8/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed Step-Down Buck 1 OUT 1.8V 600mA 6-SON T/R RoHS : Compliant |
| 9,491 | ||
| R1271L331B-TR | Nisshinbo Micro Devices | IC VOLT REG Fixed Step-Down Buck 1 OUT 3.3V 1A 12-SON T/R RoHS : Compliant |
| 3,000 | ||
| R1271L331B-TR-K | Nisshinbo Micro Devices | IC VOLT REG Fixed Step-Down Buck 1 OUT 3.3V 1A 12-SON T/R RoHS : Compliant |
| 6,000 | ||
| R1271L331B-TR-Y | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 6,000 | ||
| R1271L501A-TR-Y | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 3,000 | ||
| HZ27-1LTD-E | Renesas Electronics Corporation | Zener Diode Single 25.9V 400mW DO35 T/R RoHS : Compliant |
| 27,500 | ||
HZS27-1LTD-E | Renesas Electronics Corporation | Zener Diode, 25.9V V(Z), 2.7%, 0.4W, Silicon, Unidirectional, DO-34 RoHS : Compliant |
| 1,550 | ||
| R5471L270RG-TR | Ricoh Electronic Devices Co Ltd | R5471L270 - Li-ion Battery Protection IC For 1 cell Battery RoHS : Compliant |
| 830,000 | ||
| LA42071L-E | SANYO Semiconductor Co Ltd | Audio Output for TV Application 5W Power Ampilfier RoHS : Compliant |
| 39,759 | ||
 Sager | BC54171-LB | ABB Group | OCTAGNL BOX 2-1/8IN LOOMEX BRACKET |
| 0 | |
| ARC6-08-27.1-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| ZLTMM-109-71-L-D-730 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-110-71-L-D-693 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-115-71-L-D-292 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-120-71-L-D-618 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| IPC1SAD7/1L0S | IDEC Corporation | PUSHBUTTON SWITCH FD DBLE ICON |
| 0 | ||
| ZLTMM-105-71-L-D-630 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-110-71-L-D-632 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-110-71-L-D-669 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-110-71-L-D-713 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-113-71-LM-D-650 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-104-71-L-D-669-02 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-104-71-L-D-671 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-109-71-L-D-720 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Ameya Holding Limited | BD71L4LG-1GTR | ROHM Semiconductor | CMOS 过电压检测IC RoHS : Compliant |
| 6,300 | |
| B32671L1122J | Infineon Technologies AG | 4,233 | ||||
| BD71L3SHFV-TR | ROHM Semiconductor | 过电压检测IC RoHS : Compliant |
| 3,300 | ||
| RF071LAM4STR | ROHM Semiconductor | 超快速恢复二极管 RoHS : Compliant |
| 2,890 | ||
| RF071L4STFTE25 | ROHM Semiconductor | Fast Recovery Diodes (支持 AEC-Q101) RoHS : Compliant |
| 1,500 | ||
| RF071L4STE25 | ROHM Semiconductor | Fast Recovery Diodes RoHS : Compliant |
| 1,400 | ||
| EEUFC1J471L | Panasonic Electronic Components | RoHS : Compliant | 100 | |||
 ComSIT USA | B32671L1152J189 | TDK Electronics | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 1600V, 5% +Tol, 5% -Tol, 0.0015uF, Through Hole Mount RoHS : Compliant | 5,100 | ||
| B32671L472Z1 | TDK Electronics | Film Capacitor, 4.7nF, 1000V, �20%, Radial RoHS : Compliant | 5,000 | |||
| LGR971L10 | OSRAM GmbH | LEAD (PB) FREE PRODUCT-ROHS COMPLIANT CHIPLED Single Color LED, Green, Colorless Diffused, 1.3mm RoHS : Compliant | 3,030 | |||
| MMBR571LT1 | Motorola Semiconductor Products | THE RF LINE NPN SILICON HIGH-FREQUENCY TRANSISTOR RF Small Signal Bipolar Transistor, 0.08A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, TO-236AB RoHS : Not Compliant | 2,778 | |||
| G671L293T73UF | Gmt Microelectronics Corp | MICROPROCESSOR RESET IC Power Management Circuit, Fixed, +2.91V RoHS : Compliant | 2,305 | |||
| 4116R1471LF | Bourns Inc | THICK FILM MOLDED DIP Array/Network Resistor, Isolated, Metal Glaze/thick Film, 2.25W, 470ohm, 100V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount, 8631 RoHS : Compliant | 1,784 | |||
| BUZ71LSTS | Siemens | N CHANNEL ENHANCEMENT MODE AVALANCHE-RATED LOGIC LEVEL SIPMOS POWER TRANSISTOR Power Field-Effect Transistor, 14A I(D), 50V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 1,700 | |||
| SIL051A7271L | Standex-Meder Electronics | REED RELAY Dry Reed Relay, 1 Form A, SPST, MBB, 0.01A (Coil), 50mW (Coil), 0.5A (Contact), 200VDC (Contact), DC Input, Random, AC/DC Output RoHS : Compliant | 1,660 | |||
| B32671L4333K | TDK Electronics | Film capacitor, 0.33 �F, 400 V, �10% tolerance, radial leaded, 105�C, 50/60 Hz. RoHS : Not Compliant | 1,000 | |||
| LM2671LDADJNOPB | Texas Instruments | Switching Regulator, Voltage-mode, 0.5A, 400kHz Switching Freq-Max, DMOS, PDSO16 RoHS : Compliant | 560 | |||
| BUZ71L | Siemens | N CHANNEL ENHANCEMENT MODE AVALANCHE-RATED LOGIC LEVEL SIPMOS POWER TRANSISTOR Power Field-Effect Transistor, 14A I(D), 50V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 350 | |||
| SL871LS | Telit | Telecom Circuit RoHS : Not Compliant | 180 | |||
| SILOS1A7271L | Standex-Meder Electronics | Electronic Component RoHS : Not Compliant | 100 | |||
| SIL241A7271L | Standex-Meder Electronics | SINGLE-IN-LINE REED RELAY Dry Reed Relay, SPST, Momentary, 0.012A (Coil), 24VDC (Coil), 290mW (Coil), 1A (Contact), 200VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount RoHS : Compliant | 39 | |||
| TMC4671LA | Analog Devices Inc | Motor Driver ICs Controller - Commutation, Direction Management 70mA 76-QFN Tray RoHS : Compliant | 3 | |||
 Interstate Connecting Components | MS3471L18-8P | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 251 | |
| MS3471L20-16PX L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 40 | ||
| MS3471L20-41PX L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 40 | ||
| MS3471L14-18S | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 36 | ||
| MS3471L14-18SX | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 36 | ||
| MS3471L24-19PY | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 25 | ||
| 557B071LF230 | Glenair Inc | 0 | ||||
| MS3471L16-23PW L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| MS3471L18-30SZ | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| MS3471L22-21P | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| MS3471L22-21PX | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| MS3471L22-21SW L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| MS3471L22-55SZ L/C | Conesys | MIL-DTL-26482 Series 2 connectors have improved sealing compared to the 26482 Series I connectors and rear hardware is not supplied allowing for rear hardware versatility. MIL-DTL-26482 Series 2 harsh environment connectors consist of narrow and wide fl |
| 0 | ||
| PV71L20-41SL | ITT Interconnect Solutions | PV71L20-41SL | 0 | |||
| PV71L24-19S | ITT Interconnect Solutions | PV71L24-19S | 0 | |||
 PEI Genesis | MS3471L14-18S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 16 | |
| MS3471L14-18SX | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 16 | ||
| MS3471L14-9S-LC | Aero-Electric Connector Inc |
| 16 | |||
| 177-1LW24 | HellermannTyton |
| 0 | |||
| MS3471L12-03S-LC | Amphenol Aerospace |
| 0 | |||
| MS3471L14-18S | Amphenol Aerospace |
| 0 | |||
| MS3471L14-18S-U | Amphenol Aerospace |
| 0 | |||
| MS3471L16-26SW-LC | Amphenol Aerospace |
| 0 | |||
| MS3471L18-30SZ | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3471L18-8P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3471L18-8P | Amphenol Aerospace |
| 0 | |||
| MS3471L22-21P | Amphenol Aerospace |
| 0 | |||
| MS3471L22-21P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3471L22-21PX | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS3471L22-21PX | Amphenol Aerospace |
| 0 | |||
 Rutronik | BD71L4LG-1GTR | ROHM Semiconductor | DETECTOR 4,05V 0,8µA SSOP5 RoHS : Compliant |
| 3,000 | |
 Chip 1 Exchange | B32671L472J189 | TDK Electronics | INSTOCK | 397,379 | ||
| B32671L0472J189 | KEMET Corporation | INSTOCK | 54,400 | |||
| 771-LM75BTP147 | INSTOCK | 1,100 | ||||
LM4871LD/NOPB | Texas Instruments | INSTOCK RoHS : Compliant | 750 | |||
| B32671L0472J000 | TDK Electronics | INSTOCK RoHS : Compliant | 200 | |||
HMC571LC5 | Hittite Microwave Corp | INSTOCK RoHS : Compliant | 97 | |||
| ZL30671LFG7 | Microchip Technology Inc | INSTOCK RoHS : Compliant | 81 | |||
| RBR71L27000BR | INSTOCK | 71 | ||||
| 4816P-1-471LF | Bourns Inc | INSTOCK RoHS : Compliant | 47 | |||
| SIL05-1A72-71L | Standex-Meder Electronics | INSTOCK RoHS : Compliant | 5 | |||
| CDRH1271LDNP-100MB | INSTOCK | 5 | ||||
| CY7C371L-110JC | Cypress Semiconductor | INSTOCK | 1 | |||
 Avnet Abacus | EEUFC1J471L | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 63 V 20 Radial Leaded 5000 hours 105C Polar Radial Leaded (Alt: EEUFC1J471L) RoHS : Compliant | 15,700 | ||
| EEUFC1H471L | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 50 V 20 Radial Leaded 3000 hours 105C Polar Radial Leaded (Alt: EEUFC1H471L) RoHS : Compliant | 11,700 | |||
| EEUFC1E471L | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 25 V 20 Radial Leaded 2000 hours 105C Polar Radial Leaded (Alt: EEUFC1E471L) RoHS : Compliant | 4,600 | |||
| EEUFM1E471L | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 25 V 20 Radial Leaded 4000 hours 105C Polar Radial Leaded (Alt: EEUFM1E471L) RoHS : Compliant | 3,800 | |||
| EEUFR1E471LB | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 25 V 20 Radial Leaded 9000 hours 105C Polar Radial Leaded (Alt: EEUFR1E471LB) RoHS : Compliant | 3,000 | |||
| EEUFC1C471L | Panasonic Electronic Components | Electrolytic Capacitor 470 uF 16 V 20 Radial Leaded 2000 hours 105C Polar Radial Leaded (Alt: EEUFC1C471L) RoHS : Compliant | 1,000 | |||
| 4608X-101-471LF | Bourns Inc | Resistor Network 470 Ohm 2 1 W 7 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: 4608X-101-471LF) RoHS : Compliant | 1,000 | |||
| ZLTMM-113-71-L-D-725 | Samtec Inc | Board Stackers Spacers Pin Header 1842 mm 26 Contacts Solder 2 Rows 2 mm ZLTMM Series (Alt: ZLTMM-113-71-L-D-725) RoHS : Compliant | 390 | |||
| EEUFR1J271L | Panasonic Electronic Components | Electrolytic Capacitor 270 uF 63 V 20 Radial Leaded 10000 hours 105C Polar (Alt: EEUFR1J271L) RoHS : Compliant | 0 | |||
| 3329P-1-471LF | Bourns Inc | Resistor Trimmer Cermet 470 Ohm 10 500 mW 1 Turn Single Turn Through Hole (Alt: 3329P-1-471LF) RoHS : Compliant | 0 | |||
| B32671L1102J3 | TDK Corporation | Power Film Capacitor 1000 pF 600 V 16 kV 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: B32671L1102J003) RoHS : Compliant | 0 | |||
| 4816P-T02-271LF | Bourns Inc | (Alt: 4816P-T02-271LF) RoHS : Compliant | 0 | |||
| B32671L1272J289 | TDK Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 2700 pF 5 Through Hole 600 V 16 kV (Alt: B32671L1272J289) RoHS : Compliant | 0 | |||
| 4612X-104-331/471L | Bourns Inc | Resistor Network 330 Ohm470 Ohm 2 15 W 20 Resistors Dual Terminator SIP PC Pin (Alt: 4612X-104-331/471L) RoHS : Compliant | 0 | |||
| 4606X-104-331/471L | Bourns Inc | Resistor Network 330 Ohm470 Ohm 2 750 mW 8 Resistors Dual Terminator SIP PC Pin (Alt: 4606X-104-331/471L) RoHS : Compliant | 0 | |||
Avnet Asia | 10162876-1SF271LF | Amphenol Corporation | (Alt: 10162876-1SF271LF) RoHS : Compliant | 0 | ||
| EEFGX0D471L | Panasonic Electronic Components | (Alt: EEFGX0D471L) RoHS : Compliant | 0 | |||
| EEUFS1K271L | Panasonic Electronic Components | FS / 80V / 270uF / 105C / 10000h / 10x25mm / ripple 1200 mArms / mm / bulk / Halogen Free (Alt: EEUFS1K271L) RoHS : Compliant | 0 | |||
| DMC3071LVT-7 | Diodes Incorporated | (Alt: DMC3071LVT-7) RoHS : Compliant | 0 | |||
| NHA14571LF | Amphenol Corporation | POWER CABLE ASSEMBLY (Alt: NHA14571LF) RoHS : Compliant | 0 | |||
| 10156914-1KF271LF | Amphenol Corporation | FCI10156914-1KF271LF BK350 ORV3 IT GEAR (Alt: 10156914-1KF271LF) RoHS : Compliant | 0 | |||
| B32671L0472J289 | TDK Corporation | (Alt: B32671L0472J289) RoHS : Compliant | 0 | |||
| 10132080-D00071LF | Amphenol Corporation | FCI10132080-D00071LF POWER,CABLE,ASSEMBL (Alt: 10132080-D00071LF) RoHS : Compliant | 0 | |||
| EEUFS1K471L | Panasonic Electronic Components | Electrolytic Capacitor, 470 uF, 80 V, ? 20%, Radial Leaded, 10000 hours @ 105?C, Polar (Alt: EEUFS1K471L) RoHS : Compliant | 0 | |||
| LG R971-LM-1-0-20-R18 | ams OSRAM Group | (Alt: LG R971-LM-1-0-20-R18) RoHS : Compliant | 0 | |||
| WSL36371L000DEA | Vishay Intertechnologies | (Alt: WSL36371L000DEA) RoHS : Compliant | 0 | |||
| EEUFR1E471L | Panasonic Electronic Components | Electrolytic Capacitor, 470 uF, 25 V, ? 20%, Radial Leaded, 9000 hours @ 105?C, Polar, Radial Leaded (Alt: EEUFR1E471L) RoHS : Compliant | 0 | |||
| EEEFH1A471L | Panasonic Electronic Components | (Alt: EEEFH1A471L) RoHS : Compliant | 0 | |||
| EEUFC1J471L | Panasonic Electronic Components | Electrolytic Capacitor, 470 uF, 63 V, ? 20%, Radial Leaded, 5000 hours @ 105?C, Polar, Radial Leaded (Alt: EEUFC1J471L) RoHS : Compliant | 0 | |||
| B32671L0123J000 | TDK Corporation | (Alt: B32671L0123J000) RoHS : Compliant | 0 | |||
 Avnet Silica | NB671LGQ-P | Monolithic Power Systems | (Alt: NB671LGQ-P) RoHS : Compliant | 0 | ||
| NB671LGQ-Z | Monolithic Power Systems | (Alt: NB671LGQ-Z) RoHS : Compliant | 0 | |||
| NB671LBGQ-P | Monolithic Power Systems | (Alt: NB671LBGQ-P) RoHS : Compliant | 0 | |||
NB671LBGQ-Z;-;-16.jpg) | Monolithic Power Systems | (Alt: NB671LBGQ-Z) RoHS : Compliant | 0 | |||
| NB671LCGQ-Z | Monolithic Power Systems | WIDE VIN 5524V 6A COT SYNCHRONOUS ST (Alt: NB671LCGQ-Z) RoHS : Compliant | 0 | |||
| NB671LCGQ-P | Monolithic Power Systems | QFN16 24V High Current Synchronous StepDown Converter (Alt: NB671LCGQ-P) RoHS : Compliant | 0 | |||
| NB671LAGQ-Z | Monolithic Power Systems | (Alt: NB671LAGQ-Z) RoHS : Compliant | 0 | |||
| DMC3071LVT-7 | Diodes Incorporated | (Alt: DMC3071LVT-7) RoHS : Compliant | 0 | |||
| DMC3071LVT-13 | Diodes Incorporated | (Alt: DMC3071LVT-13) RoHS : Compliant | 0 | |||
| DMN3071LFR4-7 | Diodes Incorporated | (Alt: DMN3071LFR4-7) RoHS : Compliant | 0 | |||
| DMTH10H071LFDFWQ-7 | Diodes Incorporated | (Alt: DMTH10H071LFDFWQ-7) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | SL871LS3232R001 | Telit | SL871L-S MODULE AXN2.32, minireel |
| 1 | |
| SL871LG3220R002 | Telit | SL871LG3220R002 |
| 1 | ||
| SL871LG3240R001000 | Telit | SL871L MODULE 2.4.0-N96 |
| 0 | ||
| TMC4671-LA | Analog Devices Inc | FOC Servo Controller IC, QFN-76 RoHS : Compliant |
| 0 | ||
| SL871LG3234R003000 | Telit | SL871L MODULE 2.3.4-N115 |
| 0 | ||
| SL871LG3240R003000 | Telit | SL871L MODULE 2.4.0-N115 |
| 0 | ||
 Component Electronics, Inc | EEU-FC1E471L | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 5,140 | |
| GRM31M5C2H390JY71L | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 2,800 | ||
| 4816P-1-271LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,203 | ||
| MMBR571LT1 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,500 | ||
| 4116R-1-271LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 650 | ||
| 4116R-1-471LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 500 | ||
| 4308R-102-471LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 440 | ||
| IHD1BH471L | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 86 | ||
| 4816P-T01-271LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 51 | ||
| EEU-FC2A271L | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 40 | ||
| 4610X-101-471LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 39 | ||
| ECA-1AFQ471L | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 5 | ||
| EEU-FR1V471LB | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 3 | ||
| T71L5D164-12 | TE Connectivity | IN STOCK SHIP TODAY | 2 | |||
| IHD3BH271L | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
 DB Roberts | MS21071L06 | Military Specifications |
| 11 | ||
| AECH2528K271L | PennEngineering (PEM) | 1/4 | 0 | |||
 EBV Elektronik | ZL30271LDG1 | Microchip Technology Inc | 10output clock generator (Alt: ZL30271LDG1) RoHS : Compliant | 0 | ||
| R1271L331A-TR | Nisshinbo Micro Devices | (Alt: R1271L331A-TR) RoHS : Compliant | 0 | |||
| ACPL-071L-560E | Broadcom Limited | Optocoupler LogicOut PushPull DCIN 1CH 8Pin SOIC TR (Alt: ACPL-071L-560E) RoHS : Compliant | 0 | |||
| ACPL-071L-500E | Broadcom Limited | Optocoupler CMOSOUT DCIN 1CH 8Pin SOIC TR (Alt: ACPL-071L-500E) RoHS : Compliant | 0 | |||
| ACPL-071L-060E | Broadcom Limited | Optocoupler LogicOut PushPull DCIN 1CH 8Pin SOIC Tube (Alt: ACPL-071L-060E) RoHS : Compliant | 0 | |||
| ACPL-071L-000E | Broadcom Limited | Optocoupler CMOSOUT DCIN 1CH 8Pin SOIC Tube (Alt: ACPL-071L-000E) RoHS : Compliant | 0 | |||
| R1271L501C-TR-K | Nisshinbo Micro Devices | Conv DC to DC Single Step Down 36V to 42V 12Pin DFN TR (Alt: R1271L501C-TR-K) RoHS : Compliant | 0 | |||
| BTS500071LUAAUMA1 | Infineon Technologies AG | (Alt: SP005558027) RoHS : Compliant | 0 | |||
| L20971_LYRA-PROTO | LEDIL | (Alt: L20971_LYRA-PROTO) RoHS : Compliant | 0 | |||
| XI3535-RGBIC0271L-AM | Everlight Electronics Co Ltd | High Power LEDs White (Alt: XI3535-RGBIC0271L-AM) RoHS : Compliant | 0 | |||
| C19471_LIANNA-2R-60-L1 | LEDIL | LIANNA2R60 60 wide beam (Alt: C19471_LIANNA-2R-60-L1) RoHS : Compliant | 0 | |||
| F17871_LINDA-40-O-FLEX-1500MM | LEDIL | F17871LINDA40OFLEX1500MM (Alt: F17871_LINDA-40-O-FLEX-1500MM) RoHS : Compliant | 0 | |||
 ECCO | AE771L10-6S | Aero-Electric Connector Inc | RoHS : Compliant | 395 | ||
| AE771L14-19B | Aero-Electric Connector Inc | 198 | ||||
| AE771L14-12S | Aero-Electric Connector Inc | RoHS : Compliant | 159 | |||
| MS3471L14-12S-LC | Aero-Electric Connector Inc | 159 | ||||
| AE771L12-8S | Aero-Electric Connector Inc | RoHS : Compliant | 65 | |||
| AE771L12-8P | Aero-Electric Connector Inc | RoHS : Compliant | 65 | |||
| MS3471L12-10S-LC | Aero-Electric Connector Inc | 65 | ||||
| MS3471L12-3S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 65 | ||
| AE771L12-10S-LC | Aero-Electric Connector Inc | 65 | ||||
| AE771L12-3S | Aero-Electric Connector Inc | RoHS : Compliant | 65 | |||
| MS3471L14-4P | Aero-Electric Connector Inc | RoHS : Not Compliant | 42 | |||
| MS3471L16-8S | Aero-Electric Connector Inc | RoHS : Not Compliant | 36 | |||
| MS3471L20-16P | Aero-Electric Connector Inc | RoHS : Not Compliant | 29 | |||
| AE771L14-12P | Aero-Electric Connector Inc | RoHS : Compliant | 8 | |||
| MS3471L14-18S | Aero-Electric Connector Inc | RoHS : Not Compliant | 7 | |||
 Flip Electronics | 8430BY-71LFT | Integrated Device Technology Inc | Stock RoHS : Compliant | 6,841 | ||
| 8430BY-71LF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 6,841 | ||
| IDT8430BY-71LF | Integrated Device Technology Inc | Stock | 6,841 | |||
| ICS8430BY-71LF | Integrated Device Technology Inc | Stock RoHS : Compliant | 6,841 | |||
| ACPL-071L-560E | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 1,500 | ||
| ICS8N4S271LC-1080CDI | Integrated Device Technology Inc | Stock | 126 | |||
| 8N4S271LC-1080CDI | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 126 | ||
| IDT8N4S271LC-1080CDI | Integrated Device Technology Inc | Stock | 126 | |||
| SPC5671LAVVZ1R | NXP Semiconductors | Stock, Ship Today |
| 122 | ||
 Master Electronics | IPC1SAD7/1L0S | APEM Inc | Switch Push Button OFF ON SPST Square Button 4A 72VDC Latching Panel Mount Solder Lug RoHS : Compliant |
| 50 | |
| 3329P-1-471LF | Bourns Inc | Res Cermet Trimmer 470 Ohm 10% 0.5W(1/2W) 1(Elec)/1(Mech)Turn (6.35 X 5.82mm) Pin Thru-Hole Tube RoHS : Compliant |
| 0 | ||
| 4420P-2-271LF | Bourns Inc | Res Thick Film NET 270 Ohm 2% 2W ±100ppm/°C BUS Molded 20-Pin SOL Gull Wing SMD T/R RoHS : Compliant |
| 0 | ||
| 4609X-104-331/471L | Bourns Inc | Res Thick Film NET 330 Ohm/470 Ohm 2% 1.13W ±100ppm/°C TERM Conformal 9-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4612X-104-331/471L | Bourns Inc | Res Thick Film NET 330 Ohm/470 Ohm 2% 1.5W ±100ppm/°C TERM Conformal 12-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4613X-101-471LF | Bourns Inc | Resistor 470 ohms 1.63 W 2 % 100 V (Max.) | Bourns 4613X-101-471LF RoHS : Compliant |
| 0 | ||
| S1SST-10-28-GF-10.71-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| BC54171-LB | Thomas & Betts | OCTAGNL BOX 2-1/8IN LOOMEX RoHS : Compliant |
| 0 | ||
| ARC6-08-27.1-LU-LU-3-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-109-71-L-D-730 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| ZLTMM-110-71-L-D-693 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| ZLTMM-115-71-L-D-292 | Samtec Inc | Conn Board Stacker HDR 30 POS 7.41mm Stack Height 2mm Solder ST Through Hole Bulk RoHS : Compliant |
| 0 | ||
| ZLTMM-119-71-L-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-120-71-L-D-618 | Samtec Inc | Conn Board Stacker HDR 40 POS 15.69mm Stack Height 2mm Solder ST Through Hole Bulk RoHS : Compliant |
| 0 | ||
| PV71L20-41SL | ITT Interconnect Solutions | Conn MIL-C-26482 Circular SKT 41 POS Crimp ST Cable Mount 41 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
 Pasternack Enterprises US | PE36571LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. SSMA Male to SSMA Male Right Angle Cable 60 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SSMA male to SSMA male right angle cable 60 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMA male to SSMA male right angle cable 60 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA cable connection on one end and right angle SSMA cable connection on the other. Our SSMA to right angle SSMA cable assemblies have a male gender on end 1 and male on end 2. This SSMA to SSMA cable is a male to male coax assembly, PE36571LF-60, can also be known as a SSMA plug to right angle SSMA plug cable assembly and will be shipped same-day as it is purchased. SSMA plug to SSMA plug cable assembly PE36571LF-60 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMA male to SSMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36571LF-60 can also be used in the other direction and will be right angle SSMA male to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to SSMA male right angle cable 60 inch length using RG178 coax, RoHS. |
| 7 | |
| PE3W09571LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm F Male to 75 Ohm F Male Cable 48 Inch Length Using 75 Ohm RG179 Coax, LF Solder., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG179 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG179 coax, LF solder, F type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our F type to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W09571LF-48 can also be known as a type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. F type plug to F type plug cable assembly PE3W09571LF-48 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality F type to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG179 coax, LF solder. |
| 2 | ||
| PE3C1371LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to 7/16 DIN Male Low Loss Cable 60 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1371LF-60 can also be known as a low loss N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C1371LF-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1371LF-60 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male low loss cable 60 inch length using LMR-400 coax, LF solder. |
| 0 | ||
| PE34071LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. SMA Female Bulkhead to SMA Female Bulkhead Cable Using PE-SR405AL Coax. PE34071LF is a SMA female bulkhead to SMA female bulkhead cable using PE-SR405AL coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34071LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with PE-SR405AL coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE34071LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE34071LF-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE34071LF-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR405AL coax. |
| 0 | ||
| PE35371LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to Reverse Thread SMA Male Cable 36 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly SMA male to reverse thread SMA male cable 36 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse thread SMA male cable 36 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse thread SMA cable connection on the other. Our SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse thread SMA cable is a male to male coax assembly, PE35371LF-36, can also be known as a SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse thread SMA plug cable assembly PE35371LF-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35371LF-36 can also be used in the other direction and will be reverse thread SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse thread SMA male cable 36 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE35571LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG213 Coax, LF Solder. PE35571LF is a SMA male to SMA male cable using RG213 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35571LF SMA male to SMA male cable assembly is constructed with RG213 coax. | 0 | |||
| PE36171LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to 7/16 DIN Male Cable 60 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to 7/16 DIN male cable 60 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to 7/16 DIN male cable 60 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 7/16 DIN cable connection on the other. Our SMA to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This SMA to 7/16 DIN cable is a male to male coax assembly, PE36171LF-60, can also be known as a SMA plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 7/16 DIN plug cable assembly PE36171LF-60 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36171LF-60 can also be used in the other direction and will be 7/16 DIN male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 7/16 DIN cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 7/16 DIN male cable 60 inch length using RG402 coax. |
| 0 | ||
| PE3W02571LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Cable Using RG174 Coax, LF Solder. PE3W02571LF is a BNC male right angle to SMA male cable using RG174 coax. This Pasternack BNC male right angle to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02571LF BNC male right angle to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W03671LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to TNC Male Right Angle Cable 100 cm Length Using RG223 Coax, LF Solder., Radio frequency assembly SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W03671LF-100CM, can also be known as a right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W03671LF-100CM is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03671LF-100CM can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle cable 100 cm length using RG223 coax, LF solder. |
| 0 | ||
| PE3W03671LF-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male Right Angle to TNC Male Right Angle Cable 50 cm Length Using RG223 Coax, LF Solder., Radio frequency assembly SMA male right angle to TNC male right angle cable 50 cm length using RG223 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC male right angle cable 50 cm length using RG223 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W03671LF-50CM, can also be known as a right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W03671LF-50CM is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03671LF-50CM can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle cable 50 cm length using RG223 coax, LF solder. |
| 0 | ||
| PE3W00571LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to 7/16 DIN Male Right Angle Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W00571LF/HS is a BNC male to 7/16 DIN male right angle cable using LMR-240 coax. This Pasternack BNC male to 7/16 DIN male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm 7/16 DIN for connector 2. BNC to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00571LF/HS BNC male to 7/16 DIN male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36171LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to 7/16 DIN Male Cable 48 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to 7/16 DIN male cable 48 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to 7/16 DIN male cable 48 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 7/16 DIN cable connection on the other. Our SMA to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This SMA to 7/16 DIN cable is a male to male coax assembly, PE36171LF-48, can also be known as a SMA plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 7/16 DIN plug cable assembly PE36171LF-48 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36171LF-48 can also be used in the other direction and will be 7/16 DIN male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 7/16 DIN cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 7/16 DIN male cable 48 inch length using RG402 coax. |
| 0 | ||
| PE3671LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug to BNC Male Cable 72 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMB plug to BNC male cable 72 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to BNC male cable 72 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMB to BNC cable is a plug to male coax assembly, PE3671LF-72, can also be known as a SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMB male to BNC plug cable assembly PE3671LF-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3671LF-72 can also be used in the other direction and will be BNC male to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to BNC male cable 72 inch length using RG188 coax, RoHS. |
| 0 | ||
| PE39771LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 10-32 Female to 10-32 Female Cable Using RG174 Coax, LF Solder. PE39771LF is a 10-32 female to 10-32 female cable using RG174 coax. This Pasternack 10-32 female to 10-32 female cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm 10-32 for connector 2. Our female 10-32 to female 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39771LF 10-32 female to 10-32 female cable assembly is constructed with RG174 coax. | 0 | |||
 Vyrian | EEUFR1J271L | Panasonic Electronic Components | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 270uF, Through Hole Mount RoHS : Compliant | 15,626 | ||
| LM3671LCX-1-3-NOPB | Texas Instruments | 9,719 | ||||
| LM2671LD-12 | Texas Instruments | Switching Regulator, 1.25A, 275kHz Switching Freq-Max, NMOS, PDSO16 | 8,579 | |||
UC1871L883B | Texas Instruments | Fluorescent Light Controller, Current-mode, 0.1A, 78kHz Switching Freq-Max, BIPolar | 8,541 | |||
LM3671LCX-1.3 | Texas Instruments | Switching Regulator, Voltage-mode, 1.15A, 2600kHz Switching Freq-Max | 7,462 | |||
| 113758-HMC571LC5 | Analog Devices Inc | RoHS : Compliant | 6,859 | |||
| NCV8871LVBGEVB | onsemi | 6,857 | ||||
LM4871LDX | Texas Instruments | Audio Amplifier, 3W, 1 Channel(s), 1 Func RoHS : Not Compliant | 6,773 | |||
| LM3671LC-1.6 | Texas Instruments | Switching Regulator, Voltage-mode, 1.15A, 2600kHz Switching Freq-Max | 6,641 | |||
| LM2671LDX-5.0 | Texas Instruments | Switching Regulator, 1.25A, 275kHz Switching Freq-Max, NMOS, PDSO16 | 6,540 | |||
| MT4C1671LDJ10 | Micron Technology Inc | Memory IC | 5,368 | |||
| LM3671LCX-1.6 | Texas Instruments | Switching Regulator, Voltage-mode, 1.15A, 2600kHz Switching Freq-Max | 5,349 | |||
| LM3671LC-1-2 | Texas Instruments | 3,757 | ||||
| MS3471L18-32SW | Defense Logistics Agency | MIL Series Connector, 32 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 835 | |||
| MS3471L10-6S | Defense Logistics Agency | MIL Series Connector, 6 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 656 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand