 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
73G-R20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | 74AUP1G373GS,132 | Rochester Electronics LLC | IC D-TYPE TRANSP 1:1 6XSON |
| 202,432 | |
| 74AUP1G373GS,132 | Rochester Electronics LLC | NEXPERIA 74AUP1G373GS - D LATCH, |
| 74,661 | ||
| CR0402-FX-2873GLF | Bourns Inc | RES SMD 287K OHM 1% 1/16W 0402 RoHS : Compliant |
| 13,362 | ||
| CR0402-FX-2873GLF | Bourns Inc | RES SMD 287K OHM 1% 1/16W 0402 RoHS : Compliant | 13,362 | |||
| CR0402-FX-2873GLF | Bourns Inc | RES SMD 287K OHM 1% 1/16W 0402 RoHS : Compliant |
| 13,362 | ||
| SG73G2BTTD82R0D | KOA Speer Electronics Inc | RES 82 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,764 | ||
| SG73G2BTTD82R0D | KOA Speer Electronics Inc | RES 82 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,764 | ||
| SG73G2BTTD82R0D | KOA Speer Electronics Inc | RES 82 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,764 | ||
| SG73G2BTTD2200D | KOA Speer Electronics Inc | RES 220 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,040 | ||
| SG73G2BTTD2200D | KOA Speer Electronics Inc | RES 220 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,040 | ||
| SG73G2BTTD2200D | KOA Speer Electronics Inc | RES 220 OHM 0.5% 1/2W 1206 RoHS : Compliant |
| 3,040 | ||
| GRM3195C2A473GA01D | Murata Manufacturing Co Ltd | CAP CER 47000PF 100V C0G 1206 RoHS : Compliant |
| 2,508 | ||
| GRM3195C2A473GA01D | Murata Manufacturing Co Ltd | CAP CER 47000PF 100V C0G 1206 RoHS : Compliant |
| 2,508 | ||
| ZLTMM-117-73-G-D-385 | JRH ELECTRONICS | CONN HEADER VERT 34POS 2MM |
| 54 | ||
| 8473.G0.5430.05.19.58.40.61.T2 | Trafag Sensors and Controls | SENSOR 10PSIG 1/4"NPT .02A |
| 21 | ||
 Avnet Americas | CR0402-FX-1873GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-1873GLF) RoHS : Compliant |
| 140,000 | |
| BH7673G-TR | ROHM Semiconductor | - Tape and Reel (Alt: BH7673G-TR) RoHS : Compliant |
| 15,000 | ||
| CR0402-FX-3573GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-3573GLF) RoHS : Compliant |
| 10,000 | ||
| MPQ5073GG-Z | Monolithic Power Systems | Power Switch 2A 12-Pin QFN T/R - Tape and Reel (Alt: MPQ5073GG-Z) RoHS : Compliant |
| 5,000 | ||
| RL20S473GRE5 | Vishay Intertechnologies | CMF-20 47K 2% T-00 RL20S473G RE5 - Tape and Reel (Alt: RL20S473GRE5) RoHS : Not Compliant |
| 500 | ||
| 3473-G610 | 3M Interconnect | Conn IDC Connector SKT 10 POS 2.54mm IDT RA Cable Mount - Bulk (Alt: 3473-G610) RoHS : Compliant | 434 | |||
| F461KJ273G400A | KEMET Corporation | - Bulk (Alt: F461KJ273G400A) RoHS : Compliant |
| 0 | ||
| F462BE273G1K0R | KEMET Corporation | - Ammo Pack (Alt: F462BE273G1K0R) RoHS : Compliant |
| 0 | ||
74AUP1G373GS,132 | Nexperia | Latch, 74AUP1G373, D Type Transparent, Tri State, 6.4 ns, 4 mA, 6 Pins, XSON - Tape and Reel (Alt: 74AUP1G373GS,132) RoHS : Compliant | 0 | |||
| 752201473GP | CTS Corporation | Fixed Network Resistor, 47 kohm, Bussed, ? 2%, 25 V, 120 mW, ? 200ppm/?C, Array, Thick Film - Bulk (Alt: 752201473GP) RoHS : Compliant |
| 0 | ||
| 753091473GPTR13 | CTS Corporation | Resistor, Network, 47 kOhm, ? 2%, 640 mW, 8 Resistors, Bussed, SIP Leadless, Solder Pad - Tape and Reel (Alt: 753091473GPTR13) RoHS : Compliant |
| 0 | ||
| 766163273GP | CTS Corporation | Fixed Network Resistor, 27 kohm, Isolated, 8 Resistors, Gull Wing, ? 2%, 50 V, 240 mW, ? 100ppm/?C - Bulk (Alt: 766163273GP) RoHS : Compliant |
| 0 | ||
| 768143473GPTR13 | CTS Corporation | Fixed Network Resistor, 47 kohm, Isolated, 7 Resistors, Gull Wing, ? 2%, 50 V, 300 mW, ? 100ppm/?C - Tape and Reel (Alt: 768143473GPTR13) RoHS : Compliant |
| 0 | ||
C1825C273G5GACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.027 uF, 50 V, 1825 [4564 Metric], ? 2%, C0G / NP0, 4.5 mm - Tape and Reel (Alt: C1825C273G5GACTU) RoHS : Compliant |
| 0 | ||
| U773GA661H2071 | Amphenol Corporation | 1X6 SFP28 CAGE, EMI FINGERS - Trays (Alt: U773GA661H2071) RoHS : Not Compliant |
| 0 | ||
 Newark | RK73G1ETTP2001F | KOA Speer Electronics Inc | RES, 2K, 0.1W, THICK FILM, 0402; RoHS : Compliant |
| 10,000 | |
| RK73G1JTTD1001F | KOA Speer Electronics Inc | RES, 1K, 1%, 0.1W, 0603; RoHS : Compliant |
| 5,006 | ||
| RK73G1JTTD1001F | KOA Speer Electronics Inc | RES, 1K, 1%, 0.1W, 0603; RoHS : Compliant |
| 5,006 | ||
| SG73G2BTTD2200D | KOA Speer Electronics Inc | RES, 220R, 0.5%, 0.33W, 1206; RoHS : Compliant |
| 5,000 | ||
| RK73G1JTTD1002F | KOA Speer Electronics Inc | RES, 10K, 0.1W, THICK FILM, 0603; RoHS : Compliant |
| 5,000 | ||
| GRM3195C2A473GA01D | Murata Manufacturing Co Ltd | CAP, MLCC, 0.047UF, C0G/NP0, 100V, 1206; RoHS : Compliant |
| 2,440 | ||
| GRM3195C2A473GA01D | Murata Manufacturing Co Ltd | CAP, MLCC, 0.047UF, C0G/NP0, 100V, 1206; RoHS : Compliant |
| 2,440 | ||
| MP6973GS-P | Monolithic Power Systems | CCM/DCM FLYBACK IDEAL DIODE, 125DEG C; RoHS : Compliant |
| 490 | ||
| MP6973GS-P | Monolithic Power Systems | CCM/DCM FLYBACK IDEAL DIODE, 125DEG C; RoHS : Compliant |
| 490 | ||
| MPQ4573GQBE-P | Monolithic Power Systems | DC/DC CONV, 1V TO 54V, 2.5A, 150DEG C; RoHS : Compliant |
| 470 | ||
| MPQ4573GQBE-P | Monolithic Power Systems | DC/DC CONV, 1V TO 54V, 2.5A, 150DEG C; RoHS : Compliant |
| 470 | ||
| MP4573GQBE-P | Monolithic Power Systems | DC/DC CONV, 1V TO 54V, 2.5A, 125DEG C; RoHS : Compliant |
| 420 | ||
| MP4573GQBE-P | Monolithic Power Systems | DC/DC CONV, 1V TO 54V, 2.5A, 125DEG C; RoHS : Compliant |
| 420 | ||
| MPQ5073GG-P | Monolithic Power Systems | POWER LOAD SW, HIGH SIDE, -40TO125DEG C; RoHS : Compliant |
| 97 | ||
| MPQ5073GG-P | Monolithic Power Systems | POWER LOAD SW, HIGH SIDE, -40TO125DEG C; RoHS : Compliant |
| 97 | ||
 Analog Devices Inc | MAX41473GTC+T | Analog Devices Inc | I2C interface with preset mode RoHS : Compliant |
| 5,000 | |
| MAX9273GTL+ | Analog Devices Inc | 1.5Gbps 22-bit Coax/STP serial RoHS : Compliant |
| 816 | ||
| MAX41473GTC+ | Analog Devices Inc | I2C interface with preset mode RoHS : Compliant |
| 782 | ||
| MAX9273GTL+T | Analog Devices Inc | 1.5Gbps 22-bit Coax/STP serial RoHS : Compliant |
| 0 | ||
 RS | ECH-U1C273GX5-CUT TAPE | Panasonic Electronic Components | CAPACITOR, PPS METALLIZED, CAP 0.027 UF, TOL 2%,VOL-RTG 16 VDC, SMT,1206,CUT TAPE |
| 2,186 | |
| B73G-3AK-QT3-RMN | Norgren | FILTER/REGULATOR, 3/8" PTF, POLY BOWL, MAN DRAIN, 5-150 PSI, 40UM, B73G SERIES |
| 65 | ||
| F73G-3AN-QD3 | Norgren | FILTER, 3/8" PTF, METAL BOWL, 250PSI, 40UM, MANUAL DRAIN, 73 SERIES |
| 20 | ||
| F73G-3AN-AD3 | Norgren | FILTER, 3/8" PTF, METAL BOWL, 250PSI, 40UM, AUTO DRAIN, 73 SERIES |
| 17 | ||
| B73G-4AK-AD3-RMG | Norgren | FILTER/REGULATOR, 1/2" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 40UM, B73G SERIES |
| 16 | ||
| R73G-4AT-RMG | Norgren | REGULATOR, PNEUMATIC, ALUM W/ZINC BONNET,1/2" PTF, T BAR, REL, 150 PSIG, GAUGE |
| 2 | ||
| F73G-4AN-AD3 | Norgren | FILTER, 1/2" PTF, METAL BOWL, 250PSI, 40UM, AUTO DRAIN, F73 SERIES |
| 2 | ||
| R73G-2AK-RFN | Norgren | PRESSURE REGULATOR, 1/4" PTF, 91 SCFM, 5 TO 60 PSIG, KNOB, R73G SERIES |
| 2 | ||
| B73G-2AK-AP1-RMG | Norgren | FILTER/REGULATOR, 1/4" PTF, POLY BOWL, AUTO DRAIN, 5-150 PSI, 5UM, B73G SERIES |
| 2 | ||
| F73G-2AN-AP3 | Norgren | FILTER, 1/4" PTF, 40 MICRO, AUTO DRAIN, TRANSPARENT W/GUARD, F73 SERIES |
| 1 | ||
| R73G-3GK-RMN | Norgren | PRESSURE REGULATOR, 3/8" G, 144 SCFM, 5 TO 150 PSIG, KNOB, R73G SERIES |
| 1 | ||
| F73G-2AD-QD1 | Norgren | FILTER, 1/4" PTF, MANUAL DRAIN, METAL BOWL, 55SCFM, 250 PSI, 5UM, F73 SERIES |
| 1 | ||
| R73G-3AT-RSG | Norgren | PRESSURE REGULATOR, 3/8" PTF, 144SCFM, 10 TO 250 PSIG, T-BAR, GAUGE, R73G SERIES |
| 1 | ||
| R73G-3AT-RMN | Norgren | REGULATOR, PNEUMATIC, ALUM W/ZINC BONNET,3/8" PTF, T BAR, REL,150 PSIG |
| 1 | ||
| 2GA51-73 (GGG-33839500|2GA51-73|2GA51-73) | Carling Technologies | SWITCH;TOGGLE;SPST;ON-NONE-OFF;BAT LEVER ACTUATOR;NON-ILLUM;15A;125VAC;QC |
| 1 | ||
 Bisco Industries | 4KIS088-73GG | Advanced Interconnect | 21 | |||
| 8020.5073.G | MISC FUSES | 3 | ||||
| M39022/11C473GM | MISCELLANEOUS | 1 | ||||
| MIL-C 16173 GR.2 CL.2 | Military Specifications | 1 | ||||
| 56-122-007-3-GL | MISC. CAPACITORS | 1 | ||||
 Rochester Electronics | 74AUP1G373GF,132 | NXP Semiconductors | D Latch, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output RoHS : Compliant |
| 1,844 | |
74AUP1G373GN,132 | NXP Semiconductors | D Latch, AUP/ULP/V Series, 1-Func, High Level Triggered, CMOS, PDSO6 RoHS : Compliant |
| 90,000 | ||
74AUP1G373GS,132 | NXP Semiconductors | Latch 1 Bits D-Type Transparent Latch 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 202,432 | ||
74AUP1G373GW,125 | NXP Semiconductors | Latch 1 Bits D-Type Transparent Latch 1.2V, 1.5V, 1.8V, 2.5V, 3.3V SOT-363 T/R RoHS : Compliant |
| 54,390 | ||
| 74AUP1G373GS,132 | Nexperia | Latch 1 Bits D-Type Transparent Latch 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 74,661 | ||
74AUP1G373GW-Q100H | Nexperia | Latch 1 Bits D-Type Transparent Latch 1.2V, 1.5V, 1.8V, 2.5V, 3.3V SOT-363 T/R RoHS : Compliant |
| 43,310 | ||
74AUP1G373GN,132 | Nexperia | D Latch, AUP/ULP/V Series, 1-Func, High Level Triggered, CMOS, PDSO6 RoHS : Compliant |
| 104,600 | ||
74AUP1G373GF,132 | Nexperia | D Latch, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output RoHS : Compliant |
| 103,996 | ||
| 74AUP1G373GW,125 | Nexperia | Latch 1 Bits D-Type Transparent Latch 1.2V, 1.5V, 1.8V, 2.5V, 3.3V SOT-363 T/R RoHS : Compliant |
| 1,280 | ||
2N3773G | onsemi | 16 A, 140 V NPN Bipolar Power Transistor RoHS : Not Compliant |
| 33,353 | ||
74LCX16373G | Fairchild Semiconductor Corporation | Bus Driver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PBGA54 RoHS : Not Compliant |
| 1,850 | ||
MAX9973GCCB+D | Maxim Integrated Products | Comparator, 1 Func, 50000uV Offset-Max, 1.2ns Response Time, BICMOS, PQFP64 RoHS : Compliant |
| 2,337 | ||
| SI8273GB-IM1 | Skyworks Solutions Inc | SI8273GB - Automotive high CMTI 2.5 kV 3V UVLO HS/LS isolated driver RoHS : Compliant |
| 43,952 | ||
| SI8273GBD-IS1R | Skyworks Solutions Inc | SI8273GBD - Automotive high CMTI 2.5 kV 3 V UVLO HS/LS isolated driver with deglitch RoHS : Compliant |
| 1,917 | ||
| MV1817-3GCGDPAS | Zarlink Semiconductor Inc | Teletext Decoder |
| 1,603 | ||
 TME | 3003W3PXX73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 3; male; crimped; Type: w/o contacts |
| 0 | |
| 3005W5PXX73G40X | Amphenol CONEC | Connector: Special D-Sub; PIN: 5; male; crimped; Type: w/o contacts |
| 0 | ||
| 3007W2SAU73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 7(2+5); female; angled; THT |
| 0 | ||
| 3008W8SXX73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 8; female; crimped; size 4 (DC) |
| 0 | ||
| 3009W4SAU73G40X | Amphenol CONEC | Connector: Special D-Sub; PIN: 9(4+5); female; angled; THT |
| 0 | ||
| 3017W5SAU73G40X | Amphenol CONEC | Connector: Special D-Sub; PIN: 17(5+12); female; angled; THT |
| 0 | ||
| 3021W1SAU73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 21(1+20); female; angled; THT |
| 0 | ||
| 3H45W2PAT73G80X | Amphenol CONEC | Connector: D-Sub HD |
| 0 | ||
| 74AUP1G373GW,125 | Nexperia | IC: digital; 3-state,D latch; Ch: 1; IN: 3; CMOS; 800mVDC÷3.6VDC; SMD RoHS : Compliant |
| 0 | ||
| 3003W3SXX73G40X | Amphenol CONEC | Connector: Special D-Sub; PIN: 3; female; crimped; size 2 (DA) |
| 0 | ||
| 321WA4SAU73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 21(4+17); female; angled; THT |
| 0 | ||
| 3H19W1PAT73G80X | Amphenol CONEC | Connector: D-Sub HD |
| 0 | ||
| 303W3CSXX73G20X | Amphenol CONEC | Connector: Special D-Sub; PIN: 3; female; crimped; size 2 (DA) |
| 0 | ||
| 321WA4SAU73G40X | Amphenol CONEC | Connector: Special D-Sub; PIN: 21(4+17); female; angled; THT |
| 0 | ||
| 6373G2 | Anderson Power Products | Connector: wire-wire |
| 0 | ||
 Ameya Holding Limited | SN74ALVCH162373GR | Texas Instruments | SN74ALVCH162373GR, D 型锁存, 透明闭锁, 16位, 三态输出, 1.65 → 3.6 V, 48针 TSSOP封装 RoHS : Compliant | 4,000 | ||
| BH7673G-TR | ROHM Semiconductor | SSOP 5/I°/Video Isolation Amplifier RoHS : Compliant |
| 3,300 | ||
| ECHU1C273GX5 | Panasonic Electronic Components | 27nF ±2% 16 V 直流 Panasonic 表面贴装 聚亚苯基硫化物薄膜电容器 RoHS : Compliant | 3,000 | |||
| BU52073GWZ-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD6373GW-E2 | ROHM Semiconductor | RoHS : Compliant |
| 30 | ||
 ComSIT USA | ECHU1273GC9 | Panasonic Electronic Components | AVAILABLE EU RoHS : Compliant | 2,054 | ||
ComSIT USA | RK73G1ETTP4302D | KOA Speer Electronics Inc | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 43000ohm, 50V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 90,000 | ||
| ERTJ0EP473GM | Panasonic Electronic Components | NTC Thermistor, 47000ohm, Surface Mount RoHS : Compliant | 20,000 | |||
| ERTJ1VP473GM | Panasonic Electronic Components | MULTILAYER NTC THERMISTOR NTC Thermistor, 47000ohm, Surface Mount RoHS : Compliant | 12,000 | |||
| ERT1J1VP473GM | Panasonic Electronic Components | Tantalum capacitor, 47?F, 35V, �10% tolerance, surface mount, 1210 package. RoHS : Compliant | 12,000 | |||
CS5173GD8G | onsemi | 1.5 A 560 KHZ BOOST REGULATOR Switching Regulator, Current-mode, 2.4A, 620kHz Switching Freq-Max, BIPolar, PDSO8 RoHS : Compliant | 11,564 | |||
TLE7273GV50 | Infineon Technologies AG | LOW DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 5V, 0.5V Dropout, PDSO14 RoHS : Not Compliant | 10,000 | |||
| BFC2373GE104MF | Vishay Intertechnologies | RADIAL POTTED TYPE DC FILM CAPACITOR Film Capacitor, Polyester, 630V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, 6920 RoHS : Compliant | 4,000 | |||
74AUP1G373GW | NXP Semiconductors | LOW-POWER D-TYPE TRANSPARENT LATCH; 3-STATE D Latch, AUP/ULP/V Series, 1-Func, High Level Triggered, 1-Bit, True Output, CMOS, PDSO6 RoHS : Compliant | 3,115 | |||
| EMLE160ADA470MF73G001 | Chemi-Con | SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 RoHS : Compliant | 1,000 | |||
| 600ENSA1073GI | TOKO Inc | Electronic Component RoHS : Compliant | 1,000 | |||
| NTCLE100E3473GB0 | Vishay Intertechnologies | NTC Thermistor, 47000ohm, Through Hole Mount RoHS : Compliant | 1,000 | |||
| L173GD | Kingbright | THROUGH-HOLE LED LAMP Single Color LED, Green, Diffused, 5mm RoHS : Compliant | 1,000 | |||
| 74ALVTH16373GR | Texas Instruments | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V 48-SOP T/R RoHS : Compliant | 475 | |||
| 74LCX16373G | onsemi | Latch 8 Bits D-Type Transparent Latch 2.5V, 3.3V 54-BGA Tray RoHS : Not Compliant | 47 | |||
| UPD78F0473GKGAKAX | Renesas Electronics Corporation | Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 10MHz, PQFP80 RoHS : Compliant | 35 | |||
 Interstate Connecting Components | U773GA661H2071 | Amphenol High Speed Interconnects | 1X6 SFP28 CAGE, EMI FINGERS | 0 | ||
| U773GA661H2071 | Amphenol FCi | 1X6 SFP28 CAGE, EMI FINGERS | 0 | |||
| U773GE162L2711A | Amphenol FCi | 1X1 SFP28 WITH HS | 0 | |||
| U773GE162L2711A | Amphenol High Speed Interconnects | 1X1 SFP28 WITH HS | 0 | |||
| M83723/73G20256 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G20399 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G24438 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G2025Y L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G2255Y L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G2419Y L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G14079 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G20168 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G2443N L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G10058 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/73G14159 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
 NexGen Digital | RK73G2BTTDD2052D | KOA Speer Electronics Inc | RoHS : Compliant | 30,000 | ||
| RK73G2BTTD1002D | KOA Speer Electronics Inc | RoHS : Compliant | 20,000 | |||
| RK73G2BTTD4752D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD1001D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD7500D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD3322D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD6491D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD3920D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD4321D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G2BTTD3011D | KOA Speer Electronics Inc | RoHS : Compliant | 10,000 | |||
| RK73G1JTTD1001F | KOA Speer Electronics Inc | RoHS : Compliant | 5,000 | |||
 PEI Genesis | M83723/73G1415N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | |
| M83723/73G803N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83373G20397 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G24618 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| M83723/73G10069 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/73G14128 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| 1127-3G | HellermannTyton |
| 0 | |||
| AE83373G24578 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G20256 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G20418 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G22326 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G2255Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83373G8988 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| M83723/73G10059 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/73G12129 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
 Powell Electronics | AT4073G | NKK Switches | UB PUSHBUTTON CAP |
| 222 | |
| M83723/73G2461N | Amphenol Corporation | CONNECTOR |
| 38 | ||
| RZ0373GASKET | Hammond Manufacturing | RZ0373 / RZ0269 GASKET- 2PK |
| 3 | ||
| 1TL887-3G | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 2 | ||
 Richardson RFPD | SI5341A-D09073-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | ||
| SI5344A-D06673-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI5394P-A10073-GMR | Skyworks Solutions Inc | 12-Channel Jitter Attenuator/Clock Multiplier with RoHS : Compliant | 0 | |||
| SI5395A-A08973-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI8273GB-AS1R | Skyworks Solutions Inc | ISO Driver with High Transient Immunity RoHS : Compliant |
| 0 | ||
| CKC21X273GDGAC | KEMET Corporation | Cap Ceramic 0.027uF 1000V C0G 2% Pad SMD 2220 Flex RoHS : Compliant | 0 | |||
| SI5345B-D13273-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| CKC18X273GWGAC | KEMET Corporation | Cap Ceramic 0.027uF 650V C0G 2% Pad SMD 1812 Flexi RoHS : Compliant | 0 | |||
| SI5335B-B09873-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335D-B14273-GM | Skyworks Solutions Inc | Web Customizable, Any Frequency, Any Output Quad C RoHS : Compliant | 0 | |||
| SI5338B-B06473-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5345B-D07973-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5395A-A08973-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI8273GB-IM1R | Skyworks Solutions Inc | Driver 4A 1-OUT High Side/Low Side Half Brdg 14-Pi RoHS : Compliant |
| 0 | ||
| SI5341B-D13773-GM | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
 Rutronik | BH7673G-TR | ROHM Semiconductor | Video Isolation Amplifier RoHS : Compliant |
| 21,000 | |
 Chip 1 Exchange | RK73G1ETQTP6491D | INSTOCK | 9,374 | |||
| RT7273GQW | Richtek Technology Corp | INSTOCK RoHS : Compliant | 8,444 | |||
| TFT6GG473G396V | TATE | INSTOCK | 6,078 | |||
| SN74ALVTH16373GR | INSTOCK | 3,697 | ||||
| RK73G1JTQTD47R0D | INSTOCK | 3,278 | ||||
| ECHU1C473GX5 | INSTOCK | 2,600 | ||||
| SMA0207-273G | Vishay Draloric | INSTOCK | 2,108 | |||
| STW8A2PD-B3 U73GY1L | Seoul Semiconductor | INSTOCK | 1,677 | |||
| C1825C273G1GAC7800 | KEMET Corporation | INSTOCK RoHS : Compliant | 1,270 | |||
| ECHU1C473GX5 | Panasonic Electronic Components | INSTOCK RoHS : Compliant | 496 | |||
| ECHU1H273GX5 | Panasonic Electronic Components | INSTOCK RoHS : Compliant | 287 | |||
| MV18173GCG | Mitel Networks Corporation | INSTOCK | 204 | |||
| EMZF350ARA100ME73G | United Chemi-Con Inc | INSTOCK | 129 | |||
| RP73G2A499KFTDF | TE Connectivity | INSTOCK | 102 | |||
| ZL50073GAG2 | INSTOCK | 74 | ||||
 Avnet Abacus | RK73G1JTTD8663F | KOA Speer Electronics Inc | FC0603 1 TCR50 - Tape and Reel (Alt: RK73G1JTTD8663F) RoHS : Compliant | 50,000 | ||
| RK73G1ELTP3602D | KOA Speer Electronics Inc | SMD Chip Resistor 36 kOhm 05 100 mW 0402 1005 Metric Thick Film High Precision (Alt: RK73G1ELTP3602D) RoHS : Not Compliant | 10,000 | |||
| ECHU1H473GX9 | Panasonic Electronic Components | General Purpose Film Capacitor Metallized PPS Stacked 1913 4833 Metric 0047 uF 2 30 V (Alt: ECHU1H473GX9) RoHS : Compliant | 9,000 | |||
| NTCLE100E3473GB0 | Vishay Intertechnologies | (Alt: NTCLE100E3473GB0) RoHS : Compliant | 5,500 | |||
| 73G-II420 | Grayhill Inc | Analog Current Input Module (Alt: 73G-II420) RoHS : Not Compliant | 0 | |||
| 752201473GP | CTS Corporation | Fixed Network Resistor 47 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film (Alt: 752201473GP) RoHS : Compliant | 0 | |||
| 766163273GP | CTS Corporation | Fixed Network Resistor 27 kohm Isolated 8 Resistors Gull Wing 2 50 V 240 mW 100ppmC (Alt: 766163273GP) RoHS : Compliant | 0 | |||
| ECHU1H273GX5 | Panasonic Electronic Components | General Purpose Film Capacitor Metallized PPS Stacked 1210 3225 Metric 0027 uF 2 30 V (Alt: ECHU1H273GX5) RoHS : Compliant | 0 | |||
| 753091473GPTR13 | CTS Corporation | Resistor Network 47 kOhm 2 640 mW 8 Resistors Bussed SIP Leadless Solder Pad - Tape and Reel (Alt: 753091473GPTR13) RoHS : Compliant | 0 | |||
| 768143473GPTR13 | CTS Corporation | Fixed Network Resistor 47 kohm Isolated 7 Resistors Gull Wing 2 50 V 300 mW 100ppmC - Tape and Reel (Alt: 768143473GPTR13) RoHS : Compliant | 0 | |||
| U773GE162L2711A | Amphenol Corporation | U773GE162L2711A (Alt: U773GE162L2711A) RoHS : Compliant | 0 | |||
| SG73G2BTTD82R0D | KOA Speer Electronics Inc | SURGE CURRENT PRECI FC 1206 05 - Tape and Reel (Alt: SG73G2BTTD82R0D) RoHS : Compliant | 0 | |||
| CR0402-FX-2873GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-2873GLF) RoHS : Compliant | 0 | |||
| C1812C473G5GAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 0047 uF 50 V 1812 4532 Metric 2 C0G NP0 - Tape and Reel (Alt: C1812C473G5GAC7800) RoHS : Compliant | 0 | |||
| GRM3195C2A473GA01D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 0047 F 100 V 1206 3216 Metric 2 C0G NP0 (Alt: GRM3195C2A473GA01D) RoHS : Compliant | 0 | |||
Avnet Asia | 74AUP1G373GM/S121X | Nexperia | (Alt: 74AUP1G373GM/S121X) RoHS : Compliant | 0 | ||
| U77-3GE162H-280EA | Amphenol Corporation | AHLU77-3GE162H-280EA SFP CONNECTOR (Alt: U77-3GE162H-280EA) RoHS : Compliant | 0 | |||
| U77-3GE462H-27211 | Amphenol Corporation | (Alt: U77-3GE462H-27211) RoHS : Compliant | 0 | |||
| U77-3GE26DH-2071 | Amphenol Corporation | 1X2 SFP 28 cage, with PCI heat sink (Alt: U77-3GE26DH-2071) RoHS : Compliant | 0 | |||
| U77-3GN862H-270Z1 | Amphenol Corporation | (Alt: U77-3GN862H-270Z1) RoHS : Compliant | 0 | |||
| U77-3GN26FH-26221 | Amphenol Corporation | AHLU77-3GN26FH-26221 ULTRAPORT SFP+ 1X2 (Alt: U77-3GN26FH-26221) RoHS : Compliant | 0 | |||
| 74AUP1G373GW-Q100H | Nexperia | Latch Transparent 3-ST 1-CH D-Type 6-Pin TSSOP T/R (Alt: 74AUP1G373GW-Q100H) RoHS : Compliant | 0 | |||
| U77-3GC261M-2071 | Amphenol Corporation | 1X2 SFP 28 CAGE WITH LP (Alt: U77-3GC261M-2071) RoHS : Compliant | 0 | |||
| 2N3773G | onsemi | 16 A, 140 V NPN Bipolar Power Transistor. ONSSPCTRNSTLT1T0R; (Alt: 2N3773G) RoHS : Compliant |
| 0 | ||
| U77-3GA16AN-2081 | Amphenol Corporation | AHLU77-3GA16AN-2081 SFP+ CAGE , (Alt: U77-3GA16AN-2081) RoHS : Compliant | 0 | |||
| U77-3GE862H-270Z1 | Amphenol Corporation | (Alt: U77-3GE862H-270Z1) RoHS : Compliant | 0 | |||
| 74AUP1G373GN,132 | Nexperia | Latch Transparent 3-ST 1-CH D-Type 6-Pin XSON (Alt: 74AUP1G373GN,132) RoHS : Compliant | 0 | |||
| U77-3GA16HL-2081 | Amphenol Corporation | AHLU77-3GA16HL-2081 ULTRAPORT SFP+ 1X1 C (Alt: U77-3GA16HL-2081) RoHS : Compliant | 0 | |||
| RK73G2ATTD10R0F | KOA Speer Electronics Inc | (Alt: RK73G2ATTD10R0F) RoHS : Compliant | 0 | |||
| NTCS0805E3473GHT | Vishay Intertechnologies | (Alt: NTCS0805E3473GHT) RoHS : Compliant | 0 | |||
 Avnet Silica | 74AUP1G373GM,115 | Nexperia | Latch 74AUP1G373 D Type Transparent Tri State 64 ns 4 mA 6 Pins XSON (Alt: 74AUP1G373GM,115) RoHS : Compliant | 50,000 | ||
| 74AUP1G373GS,132 | Nexperia | Latch 74AUP1G373 D Type Transparent Tri State 64 ns 4 mA 6 Pins XSON (Alt: 74AUP1G373GS,132) RoHS : Compliant | 5,000 | |||
| UPD70F3573GKA2-GAK-E2-AX | Renesas Electronics Corporation | RENUPD70F3573GKA2GAKE2AX (Alt: UPD70F3573GKA2-GAK-E2-AX) RoHS : Compliant | 1,000 | |||
| MP4473GL-Z | Monolithic Power Systems | Conv DCDC Single Step Down 45V to 36V 20Pin QFN TR (Alt: MP4473GL-Z) RoHS : Compliant | 0 | |||
| MP4473GL-P | Monolithic Power Systems | Conv DCDC Single Step Down 45V to 36V 20Pin QFN TR (Alt: MP4473GL-P) RoHS : Compliant | 0 | |||
| MPQ5073GG-P | Monolithic Power Systems | 55V 2A Low RDSON Load Switch Programmable Current Limit Automotive (Alt: MPQ5073GG-P) RoHS : Compliant | 0 | |||
| MP4573GQBE-P | Monolithic Power Systems | Converter DC to DC Single Buck 45V to 60V 12Pin QFN (Alt: MP4573GQBE-P) RoHS : Compliant | 0 | |||
| MPQ4573GQBE-P | Monolithic Power Systems | Converter DC to DC Single StepDown 45V to 60V 12Pin QFN (Alt: MPQ4573GQBE-P) RoHS : Compliant | 0 | |||
| MP2973GQK-0000-P | Monolithic Power Systems | IC DUAL LOOP DIGITAL MULTIPHASE CONTROL (Alt: MP2973GQK-0000-P) RoHS : Compliant | 0 | |||
| MAQ473GQE-AEC1-Z | Monolithic Power Systems | Hall Effect Sensor Angular QFN 16 Pins 3 V 36 V (Alt: MAQ473GQE-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ5073GG-AEC1-Z | Monolithic Power Systems | Power Switch Hi Side 2A 12Pin QFN EP TR (Alt: MPQ5073GG-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ4573GQB-AEC1-Z | Monolithic Power Systems | 60V 25A FULLY INTEGRATED HIGHEFFICIENCYSYNCHRONOUS STEPDOWN CONVERTER AECQ100 QUALIFIED (Alt: MPQ4573GQB-AEC1-Z) RoHS : Compliant | 0 | |||
| MX25U25673GMI40/TR | Macronix International Co Ltd | NOR Flash 256Mbit 256M X 1bit128M X 2bit64M X 4bit SPI 18V 5ns 16Pin SOP (Alt: MX25U25673GMI40/TR) RoHS : Compliant | 0 | |||
| MX25L51273GZ4I-08G/TR | Macronix International Co Ltd | (Alt: MX25L51273GZ4I-08G/TR) RoHS : Compliant | 0 | |||
| MX25L25673GM2I-08G/TR | Macronix International Co Ltd | (Alt: MX25L25673GM2I-08G/TR) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | ECH-U1H473GX9 | Panasonic Electronic Components | 100 | |||
| 03573 GRÖßE 2 GL 315A | Wohmer | 2 | ||||
 Component Electronics, Inc | RK73G1JLTD2002F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20,000 | |
| RN73G2A104D | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 14,580 | ||
| RN73G2A202D | IN STOCK SHIP TODAY | 3,000 | ||||
| RA-09473G | SMTEK International | IN STOCK SHIP TODAY |
| 1,225 | ||
| RN73G2A681D | Susumu Co Ltd | IN STOCK SHIP TODAY |
| 1,000 | ||
| RN73G2A821D | Susumu Co Ltd | IN STOCK SHIP TODAY | 1,000 | |||
| 3073-GY001 | Alpha Wire | IN STOCK SHIP TODAY |
| 700 | ||
| RN73G2A332D-T | Susumu Co Ltd | IN STOCK SHIP TODAY | 150 | |||
| MDP1601-473G | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| 2114-630/273G10 | Tecate Group | IN STOCK SHIP TODAY | 68 | |||
| CSC08A03473G | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant | 66 | |||
| 73G-IV1 | Grayhill Inc | IN STOCK SHIP TODAY |
| 15 | ||
| AD0812UX-A73GL-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 10 | ||
| 766163473G | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| 3073-GR001 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | SPL49573-GTFCZZ | Spiralock | 1 | |||
| 3073GE | Heyco | POP 625 SEPTIA BROWN 3N1566 | 0 | |||
 EBV Elektronik | 2N3773G | onsemi | 16 A 140 V NPN Bipolar Power Transistor ONSSPCTRNSTLT1T0R (Alt: 2N3773G) RoHS : Compliant | 0 | ||
| QEB373GR | onsemi | Infrared Emitter 875 nm 12 T34 18mm 16 mWSr 800 ns 800 ns (Alt: QEB373GR) RoHS : Compliant | 0 | |||
| TLE4473GV53AUMA2 | Infineon Technologies AG | LDO Regulator Pos 33V5V 03A018A 12Pin DSO TR (Alt: SP001184654) RoHS : Compliant | 0 | |||
| TLE4473GV552AUMA1 | Infineon Technologies AG | LDO Regulator Pos 5V5V 019A03A 12Pin DSO (Alt: SP000295344) RoHS : Compliant | 0 | |||
 FDH Electronics | MS27473G18F11PA | Corsair Electrical Connectors Inc | Connector |
| 75 | |
| MS27473G10F99BB | Corsair Electrical Connectors Inc | Connector |
| 40 | ||
| MS27473G10F99SB-LC | Corsair Electrical Connectors Inc | Connector |
| 40 | ||
| MS27473G18F11PC | Corsair Electrical Connectors Inc | Connector |
| 30 | ||
| M83723/73G1212N | Aero-Electric Connector Inc | Circular Conn RoHS : Not Compliant | 18 | |||
| M83723/73G1404Y | Amphenol Aerospace | Circular Conn |
| 6 | ||
| J1567-3G-03 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| M83723/73G1404Y | Aero-Electric Connector Inc | Circular Conn RoHS : Not Compliant |
| 1 | ||
| 1507-3-G-W17 | HellermannTyton | Harness Mgmt | 0 | |||
| 1507-3-G-W8 | HellermannTyton | Harness Mgmt | 0 | |||
| 1507-3-G-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| 1127-3-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1507-3-G-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| 1127-3-G-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| 1127-3-G | HellermannTyton | Harness Mgmt | 0 | |||
 Flip Electronics | CS5173GDR8G | onsemi | Stock, Ship Today RoHS : Compliant | 6,146 | ||
| 2N3773G | onsemi | Stock, Ship Today RoHS : Compliant | 2,350 | |||
| QEB373GR | onsemi | Stock, Ship Today RoHS : Compliant | 1,560 | |||
 Maritex | RK73G1JTTD1004F | KOA Speer Electronics Inc | Surface Mount Resistors; RK73G1JTTD1004F; KOA; 1 M?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 2,204 | |
| SG73G2BTTD1002D | KOA Speer Electronics Inc | Surface Mount Resistors; SG73G2BTTD1002D; KOA; 10 k?; 0.5 %; Surface Mount; Yes RoHS : Compliant |
| 1,950 | ||
U74HC573G-S20-R | Unisonic Technologies Co Ltd | Latches; U74HC573G-S20-R; UTC; 8; 6 V; 35 ns; 1 RoHS : Compliant |
| 185 | ||
| U74HC273G-D20-T | Unisonic Technologies Co Ltd | Flip Flops; U74HC273G-D20-T; UTC RoHS : Compliant |
| 100 | ||
| SG73G2BTTD1003C | KOA Speer Electronics Inc | Surface Mount Resistors; SG73G2BTTD1003C; KOA; 100 k?; 0.25 %; Surface Mount; Yes RoHS : Compliant |
| 85 | ||
| U74HC573G-P20-T | Unisonic Technologies Co Ltd | Latches; U74HC573G-P20-T; UTC |
| 78 | ||
| U74HC373G-S20-T | Unisonic Technologies Co Ltd | Latches; U74HC373G-S20-T; UTC |
| 45 | ||
| RK73G1ETTP4301F | KOA Speer Electronics Inc | Surface Mount Resistors; RK73G1ETTP4301F; KOA; 4.3 k?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 30 | ||
 Master Electronics | 3073-GR001 | Alpha Wire | Hook-up Wire 20AWG 2.54mm Tinned Copper- Green - 600V - 304.8m (1000ft)/Spool RoHS : Compliant |
| 0 | |
| EMLE6R3ADA101MF73G | United Chemi-Con Inc | Series: Mle; Volt: 6.3; Cap: 100; Dia X Length: 6X7; Packaging: Taped RoHS : Compliant |
| 0 | ||
| ZLTMM-113-73-G-D-345 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| ZLTMM-115-73-G-D-365 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| ZLTMM-116-73-G-D-375 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-117-73-G-D-385 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| ZLTMM-125-73-G-D-335 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CR0402-FX-2873GLF | Bourns Inc | Thick Film Chip Resistor - 1/16 W - 287 Kohm ±1% - ±100ppm/°C - SMD 0402 - RoHS Compliant - Tape&Reel RoHS : Compliant |
| 0 | ||
| IDSD-08-D-09.73-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| LW6ML-M2C73G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| LW7GL-A1C73G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| ZLTMM-115-73-G-D-342 | Samtec Inc | Conn Elevated Shrouded Header HDR 30 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| ZSTMM-105-73-G-D-292 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| RN73G2A140KDTDF | TE Connectivity | RN 0805 140K 0.5% 50PPM 1K RL Thin Film Precision SMD Fixed Resistor RoHS : Compliant |
| 0 | ||
| ERT-JZEP473G | Panasonic Electronic Components | MUTILAYER CHIP RoHS : Compliant |
| 0 | ||
 Neutron USA | B73G-3AK-QT3-RMN | Norgren | Norgren B73G-3AK-QT3-RMN Filter/Regulator, 3/8" PTF, Poly Bowl, Man Drain, 5-150 PSI, 40um, B73G Series |
| 50 | |
| PB1973GBLKGILEF4 | E-Switch Inc | Pushbutton Switches ILLUM PUSHBUTTON DPST 15A 250V RoHS : Compliant |
| 50 | ||
| 3073 GY005 | Alpha Wire | Hook-up Wire 20AWG 10/30 PVC 100ft SPOOL GRN/YLW |
| 50 | ||
| R73G-3AK-RMN | Norgren | Pressure Regulator, 3/8" PTF ports, 5 to150 psig, Knob, R73G Series |
| 45 | ||
| UNO-2473G-E3AE | Advantech Co Ltd | E3845, Max 4G RAM w/4xLAN,4xCOM,3xMini-PCIe: NO OS; NO Storage; No memory |
| 40 | ||
| R73G-2AK-RMN | Norgren | Norgren R73G-2AK-RMN Pressure Regulator, 1/4" PTF ports, 5 to150 psig, Knob, R73G Series |
| 33 | ||
| EVNSL0173GN-0020 | Black Box Corporation | CAT5E 100-MHZ MOLDED BOOT SOLID ETHERNET PATCH CABLE - SHIELDED (F/UTP), CMP PLE RoHS : Compliant |
| 27 | ||
| SI8273GBD-IS1 | Silicon Laboratories Inc | Gate Drivers 4A ISO DRIVER, 2.5kV Dual Input HS/LS RoHS : Compliant |
| 25 | ||
| F73G-2AN-QT3 | Norgren | Norgren F73G-2AN-QT3 Filter, 1/4" PTF, 40 Micro, Manual Drain, Transparent, F73 Series |
| 17 | ||
| F73G-3AN-AD3 | Norgren | Norgren F73G-3AN-AD3 Filter, 3/8" PTF, Metal Bowl, 250psi, 40um, Auto Drain, 73 Series |
| 17 | ||
| R73G-4GK-RMN | Norgren | Norgren R73G-4GK-RMN REGULATOR,PNEUMATIC,ALUM W/ZINC BONNET,1/2" G, KNOB, REL, 150 PSIG |
| 11 | ||
| R73G-2AK-RFG | Norgren | Norgren R73G-2AK-RFG Pressure Regulator, 1/4" PTF, 91 scfm, 5 to 60 psig, Knob, Gauge, R73G Series |
| 6 | ||
| R73G-2AT-RMG | Norgren | REGULATOR, PNEUMATIC, ALUM W/ZINC BONNET, 1/4 PTF,T BAR, REL, 150 PSIG, GAUGE |
| 2 | ||
| AD1212HB-A73-GL-LF | ADDA USA Corporation | DC Fans DC Axial Fan, 120x120x25mm, 12VDC, 85.2CFM, 4.44W, 39.1dBA, 2200RPM, Ball |
| 0 | ||
| B73G-3AK-QD1-RMN | Norgren | Norgren B73G-3AK-QD1-RMN Filter/Regulator, 3/8" PTF, Metal Bowl, Man Drain, 5-150 PSI, 5um, B73G Series |
| 0 | ||
 Pasternack Enterprises US | PE3C8873/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GY coax. | 220 | ||
| PE3C8873/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-GR coax. | 220 | |||
| PE3C8873/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-300 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
| PE3C8873/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
| PE3C8873/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
| PE3C8873/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 44 | ||
| PE3C8873/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
| PE3C8873/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-120 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
 Sager | ZLTMM-113-73-G-D-345 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | |
| ZLTMM-115-73-G-D-365 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-117-73-G-D-385 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| LW6ML-M2C73G | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated RoHS : Compliant |
| 0 | ||
| LW7GL-A1C73G | IDEC Corporation | Pushbutton Switches 25mm sq Pushbutton Illuminated RoHS : Compliant |
| 0 | ||
| ZLTMM-115-73-G-D-342 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZSTMM-105-73-G-D-292 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip, Cable Mate RoHS : Compliant |
| 0 | ||
| RE73-G | ABB Group | OC RE73G URTH CTD RDC BSHG 2-1/2 - |
| 0 | ||
| ZLTMM-104-73-G-D-345 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-110-73-G-D-320 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-113-73-G-D-387 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-115-73-G-D-370 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-117-73-G-D-390 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-122-73-G-D-310 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 5273GR | ABB Group | Thomas & Betts |
| 0 | ||
 Venkel Ltd. | C1206C0G500-273GNP | VENKEL LTD | Chip Capacitor;1206;C0G;50V;0.027uF;�2% RoHS : Compliant | 0 | ||
C1812C0G500-273GNE | VENKEL LTD | Chip Capacitor;1812;C0G;50V;0.027uF;�2% RoHS : Compliant | 0 | |||
| C1206C0G500-273GNE | VENKEL LTD | Chip Capacitor;1206;C0G;50V;0.027uF;�2% RoHS : Compliant | 0 | |||
 Vyrian | CR0402-FX-8873GLF | Bourns Inc | Fixed Resistor, Metal Glaze/thick Film, 0.063W, 887000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 15,402 | ||
| CS5173GDR8 | onsemi | Switching Regulator, Current-mode, 2.4A, 620kHz Switching Freq-Max, BIPolar, PDSO8 RoHS : Not Compliant | 12,855 | |||
| MAX96773GGE-V | Analog Devices (Maxim Integrated) | 9,555 | ||||
| MAX41473GTC | Analog Devices (Maxim Integrated) | 8,568 | ||||
| SN54ALVTH32373GKE | Texas Instruments | Bus Driver, ALVT Series, 4-Func, 8-Bit, True Output, BICMOS, PBGA96 | 7,514 | |||
| MAX9273GTL-V-T | Analog Devices (Maxim Integrated) | 6,938 | ||||
| PT6673G | Texas Instruments | Switching Regulator, 1.25A, 300kHz Switching Freq-Max, Hybrid RoHS : Not Compliant | 6,672 | |||
| N25Q512A73GF8A0G | Micron Technology Inc | Flash, 512MX1, PDSO8 RoHS : Compliant | 5,944 | |||
| N25Q512A73G12A0E | Micron Technology Inc | Flash, 512MX1, PBGA24 RoHS : Compliant | 5,747 | |||
74ALVCH16373GRE4 | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 5,505 | |||
| N25Q00AA73GSFH0G | Micron Technology Inc | Flash, 1GX1, PDSO16 RoHS : Compliant | 5,305 | |||
| 74ALVCH162373GRE4 | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 4,684 | |||
| N25Q00AA73G12A0G | Micron Technology Inc | Flash, 1GX1, PBGA24 RoHS : Compliant | 3,325 | |||
| SI8273GB-IM1R | Skyworks Solutions Inc | Analog Circuit RoHS : Compliant | 379 | |||
| SI8273GB-IS1 | Skyworks Solutions Inc | Analog Circuit, 1 Func, PDSO16 RoHS : Compliant | 344 | |||
 Win Source Electronics | MX25L25673GM2I-08G | Macronix International Co Ltd | IC FLASH 256MBIT SPI 120MHZ 8SOP RoHS : Compliant |
| 80,000 | |
| RT8073GQW | Richtek Technology Corp | IC REG BUCK ADJ 6A SYNC 12WDFN / Conv DC-DC 2.9V to 5.5V Synchronous Step Down Single-Out 0.8V to 3.3V 6A 12-Pin WDFN EP RoHS : Compliant |
| 63,250 | ||
| MP173GJ-Z | Monolithic Power Systems | IC OFFLIN CONV MULT TOP TSOT23-5 RoHS : Compliant |
| 59,400 | ||
| RT7273GQW | Richtek Technology Corp | IC REG BCK ADJ 3A/2A TRPL 40WQFN RoHS : Compliant |
| 57,240 | ||
| MX25L25673GZNI-08G | Macronix International Co Ltd | IC FLSH 256MBIT SPI 120MHZ 8WSON RoHS : Compliant |
| 49,942 | ||
| MX25L25673GZ4I-08G | Macronix International Co Ltd | IC FLASH 256MBIT RoHS : Compliant |
| 29,000 | ||
| MP5073GG-Z | Monolithic Power Systems | IC PWR SWITCH P-CHAN 1:1 12QFN RoHS : Compliant |
| 11,000 | ||
| SI5351B-B02073-GM | Skyworks Solutions Inc | IC CLOCK GENERATOR 20QFN RoHS : Compliant |
| 7,849 | ||
| SI5351B-B02073-GMR | Skyworks Solutions Inc | RoHS : Compliant |
| 7,070 | ||
TLE4473GV53AUMA1 | Infineon Technologies AG | IC REG LDO 3.3V/5V 12DSO RoHS : Compliant |
| 3,637 | ||
| TLE4473GV53 | Infineon Technologies AG | Dual Low Drop Voltage Regulator RoHS : Compliant |
| 3,476 | ||
| TLE4473GV53AUMA2 | Infineon Technologies AG | IC REG LINEAR 3.3V/5V DSO12-6 / Linear Voltage Regulator IC Positive Fixed 2 Output 300mA, 180mA P-DSO-12-6 RoHS : Compliant |
| 2,800 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand