 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
74G-R20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DigiKey | SN74GTL2007PWR | Rochester Electronics LLC | IC XLTR MS UNIDIR 28-TSSOP |
| 88,000 | |
| SN74GTLPH16612DL | Rochester Electronics LLC | IC UNIV BUS TXRX 56-SSOP |
| 22,680 | ||
| SN74GTLP1395PWR | Rochester Electronics LLC | IC XLTR MS BIDIR 20-TSSOP |
| 19,884 | ||
| 74LCX16374GX | Rochester Electronics LLC | IC FF D-TYPE 2-ELE 8-BIT 54-FBGA |
| 11,990 | ||
| SN74GTLP22033DGGR | Rochester Electronics LLC | IC LVTTL/GTLP TRX 8BIT 48-TSSOP |
| 8,000 | ||
SN74GTL2003RKSR | Texas Instruments | IC XLTR VL BIDIR 20-VQFN RoHS : Compliant |
| 2,502 | ||
| SN74GTL2003RKSR | Texas Instruments | IC XLTR VL BIDIR 20-VQFN RoHS : Compliant |
| 2,502 | ||
| BH-74G-5-P | Adam Technologies Inc | BATTERY HOLDER COIN 20MM SMD RoHS : Compliant |
| 1,218 | ||
| MK 231 74 G | Fischer Elektronik GmbH & Co KG | for 0.5 mm |
| 1,000 | ||
| SLP 1 16 117 4 G | Fischer Elektronik GmbH & Co KG | One row, 1-36 contacts, for PCB |
| 1,000 | ||
SN74GTL2010PW | Texas Instruments | IC XLTR VL BIDIR 24-TSSOP RoHS : Compliant |
| 450 | ||
| 8020.5074.G | Schurter Electronic Components | FUSE CERM 4A 500VAC 400VDC 3AB RoHS : Compliant |
| 369 | ||
| CM-100474GNBSTK | Coolgear Inc | 12Ft Cat.5E UTP Ethernet Network |
| 93 | ||
| 189HS010-174G | JRH ELECTRONICS | CONNECTOR BACKSHELL |
| 63 | ||
| EVQ5074-G-00A | Monolithic Power Systems | EVAL BOARD FOR MPQ5074 |
| 8 | ||
 Avnet Americas | 74LVC1G74GT,115 | Nexperia | - Tape and Reel (Alt: 74LVC1G74GT,115) RoHS : Compliant | 10,000 | ||
74LVC1G74GS,115 | Nexperia | - Tape and Reel (Alt: 74LVC1G74GS,115) RoHS : Compliant |
| 5,000 | ||
74AVC4T774GUX | Nexperia | Transceiver, Translating, 4 Input, 12 ns, 0.8 V to 3.6 V, 16 Pins, XQFN - Tape and Reel (Alt: 74AVC4T774GUX) RoHS : Compliant |
| 4,000 | ||
| 768163474GPTR13 | CTS Corporation | Fixed Network Resistor, 470 kohm, Isolated, 8 Resistors, Gull Wing, ? 2%, 50 V, 300 mW, ? 100ppm/?C - Tape and Reel (Alt: 768163474GPTR13) RoHS : Compliant |
| 2,000 | ||
| RL20S474GB14 | Vishay Intertechnologies | - Bulk (Alt: RL20S474GB14) RoHS : Not Compliant |
| 200 | ||
| ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN Transceiver, 1 TX, 1 RX, 4.5 V to 28 V, 14 Pins, SOIC - Tape and Reel (Alt: ATA6574-GNQW1-VAO) RoHS : Not Compliant |
| 25 | ||
| F461BK274G400R | KEMET Corporation | - Ammo Pack (Alt: F461BK274G400R) RoHS : Compliant |
| 0 | ||
| F461DI474G400Z | KEMET Corporation | - Boxed Product (Development Kits) (Alt: F461DI474G400Z) RoHS : Compliant |
| 0 | ||
74LVC2G74GF,115 | Nexperia | - Tape and Reel (Alt: 74LVC2G74GF,115) RoHS : Compliant | 0 | |||
| 767141474GPTR13 | CTS Corporation | Fixed Network Resistor, 470 kohm, Bussed, 13 Resistors, Gull Wing, ? 2%, 50 V, 150 mW, ? 100ppm/?C - Tape and Reel (Alt: 767141474GPTR13) RoHS : Compliant |
| 0 | ||
| ZLTMM-108-74-G-D-490 | Samtec Inc | - Bulk (Alt: ZLTMM-108-74-G-D-490) RoHS : Compliant | 0 | |||
| ZLTMM-120-74-G-D-560 | Samtec Inc | - Bulk (Alt: ZLTMM-120-74-G-D-560) RoHS : Compliant | 0 | |||
| S41X083474GP | CTS Corporation | Fixed Network Resistor, 470 kohm, Isolated, 4 Resistors, 0402 [1005 Metric], Convex, ? 2%, 50 V - Tape and Reel (Alt: S41X083474GP) RoHS : Compliant | 0 | |||
| M83723/74G1006Y | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 6 Contacts, Crimp Pin, Bayonet - Bulk (Alt: M83723/74G1006Y) RoHS : Not Compliant |
| 0 | ||
| M83723/74G20169 | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 16 Contacts, Crimp Pin, Bayonet - Bulk (Alt: M83723/74G20169) RoHS : Not Compliant |
| 0 | ||
 Newark | Z017-4G7C1-11000-E200 | Amphenol Communications Solutions | CLIP,SUS T0.15,HEIGHT 3.4; RoHS : Compliant |
| 90,200 | |
| Z007-4G7L1-11000 | Amphenol Communications Solutions | SPRING,SUS T0.15,HEIGHT 5.2; RoHS : Compliant |
| 45,000 | ||
| Z017-4G7C1-11000-E200 | Amphenol Communications Solutions | CLIP,SUS T0.15,HEIGHT 3.4; RoHS : Compliant |
| 19,700 | ||
| Z007-4G7L1-11000 | Amphenol Communications Solutions | SPRING,SUS T0.15,HEIGHT 5.2; RoHS : Compliant |
| 13,023 | ||
| 74LVC1G74GT-Q100X | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 4,678 | ||
| 74LVC1G74GT-Q100X | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 4,678 | ||
| 74LVC2G74GT,115 | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 1,540 | ||
| 74LVC2G74GT,115 | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 1,540 | ||
| TLE4274GV50ATMA2 | Infineon Technologies AG | LDO, AEC-Q100, FIXED, 5V, 0.4A, TO-263-3; RoHS : Compliant |
| 1,173 | ||
| TLE4274GV50ATMA2 | Infineon Technologies AG | LDO, AEC-Q100, FIXED, 5V, 0.4A, TO-263-3; RoHS : Compliant |
| 1,173 | ||
| TLE4274GV10ATMA2 | Infineon Technologies AG | LDO, FIXED, 10V, 0.4A, -40 TO 150DEG C; RoHS : Compliant |
| 1,086 | ||
| TLE4274GV10ATMA2 | Infineon Technologies AG | LDO, FIXED, 10V, 0.4A, -40 TO 150DEG C; RoHS : Compliant |
| 1,086 | ||
| C1210C274G5JACT500 | KEMET Corporation | CAP, 0.27?F, 50V, 2%, U2J, 1210; RoHS : Compliant |
| 364 | ||
| C1210C274G5JACT500 | KEMET Corporation | CAP, 0.27?F, 50V, 2%, U2J, 1210; RoHS : Compliant |
| 364 | ||
| 503-232974G | Vero Technologies | PANEL, FRONT, ANODISED, 2U; RoHS : Compliant |
| 3 | ||
 Analog Devices Inc | MAX41474GTC+T | Analog Devices Inc | I2C interface with preset mode RoHS : Compliant |
| 15,000 | |
| MAX96774GTM/VY+ | Analog Devices Inc | 6Gbps GMSL2 eDP Deserializer w | 901 | |||
| MAX41474GTC+ | Analog Devices Inc | I2C interface with preset mode RoHS : Compliant |
| 346 | ||
 RS | 1411174 (G-INS-PG16-S68N-NNES-S) | Phoenix Contact | CABLE GLAND;0.39" -~ 0.55" -(10.0MM ~ 14.0MM);PG16;BRASS/NICKEL;SILVER;IP68/6 |
| 59 | |
| F74G-4AN-AD3 | Norgren | FILTER, 1/2" PTF, METAL BOWL, 250 PSIG, AUTO DRAIN, 40UM, 140 SCFM, F74 SERIES |
| 30 | ||
| B74G-6AK-AD3-RMG | Norgren | FILTER/REGULATOR, 3/4" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 19 | ||
| F74G-4AN-QD3 | Norgren | FILTER, 1/2" PTF, METAL BOWL, 250 PSIG, MANUAL DRAIN, 40UM, 140 SCFM, F74 SERIES |
| 18 | ||
| CU-1874-G | BUD Industries Inc | ENCLOSURE, ABS, UL94HB, LIGHT GRAY, 5.3 X 2.94 X 1.95, UTILIBOX STYLE F SERIES |
| 8 | ||
| R74G-6AT-RMG | Norgren | REGULATOR, 3/4" PTF, 220 SCFM, 5 TO 150 PSIG, GAUGE, T-BAR, R74G SERIES |
| 6 | ||
| F74G-6AN-QP3 | Norgren | FILTER, 3/4" PTF, POLY BOWL, 150 PSIG, MANUAL DRAIN, 40UM, 140 SCFM, F74 SERIES |
| 2 | ||
| R74G-4GK-RMN | Norgren | REGULATOR, 1/2" G, 220 SCFM, 5 TO 150 PSIG, KNOB, R74G SERIES |
| 2 | ||
| F74G-4AN-QD1 | Norgren | FILTER, 1/2" PTF, METAL BOWL, 250 PSIG, MANUAL DRAIN, 5UM, 140 SCFM, F74 SERIES |
| 2 | ||
| B74G-KITA40R | Norgren | REPAIR KIT, FOR B74G SERIES W/AUTODRAIN, 40 MIC |
| 1 | ||
| F74G-4GN-AP1 | Norgren | FILTER |
| 1 | ||
| F74G-4AN-QM3 | Norgren | FILTER, GENERAL PURPOSE, 1/2NPT, MAN DRAIN, 40 MIC, EXCELON |
| 1 | ||
| 9T18Y1074G07 | ABB Low Voltage Products and Systems | WALL MOUNT BRKT UY74A/UX74A/Y75A/X75C |
| 1 | ||
| B74G-3AK-AD1-RMG | Norgren | FILTER/REGULATOR, 3/8" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 1 | ||
| B74G-4AK-QM3-RMG | Norgren | FILTER/REGULATOR, 1/2" PTF, BOWL, MAN DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 1 | ||
 Microchip Technology Inc | ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2050-11-22 RoHS : Compliant |
| 40,133 | |
| EV74G56A | Microchip Technology Inc | SAM C21 MC DIM, Projected EOL: |
| 147 | ||
| TFS174G | Microchip Technology Inc | TFS174G, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| MX574GB00000000 | Microchip Technology Inc | 46.0000MHz Ultra-Low Jitter Crystal Oscillator, LLGA, Projected EOL: 2044-08-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2050-11-22 RoHS : Compliant |
| 0 | ||
| ATA6574-GNQW1-VAO-VW | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2051-08-13 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | C-4674-GEL | Keystone Electronics Corp | 19,826 | |||
| SC-274-G RED | Caplugs | 8,200 | ||||
| 53-77-4G | BOYD Laconia | RoHS : Compliant | 1,783 | |||
 Rochester Electronics | 74LVC2G74GF,115 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 7,278 | |
74AUP1G74GD,125 | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, CMOS, PDSO8 RoHS : Compliant |
| 25,838 | ||
| 74AUP1G74GT,115 | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, CMOS, PDSO8 RoHS : Compliant |
| 9,750 | ||
74AUP1G374GW,125 | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, True Output, CMOS, PDSO6 RoHS : Compliant |
| 57,000 | ||
74AUP1G374GM,115 | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 100,000 | ||
74LVC1G74GN,115 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 59,800 | ||
| 74LVC2G74GS,115 | Nexperia | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 8-SON T/R RoHS : Compliant |
| 56,200 | ||
| 74AUP1G74GS,115 | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 8-SON T/R RoHS : Compliant |
| 58,678 | ||
| 74LVC1G74GT/C4X | Nexperia | Single D-type flip-flop with set and reset; positive edge trigger RoHS : Compliant |
| 145,000 | ||
74AUP1G374GN,132 | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 95,000 | ||
| 74AVC4T774GUX | Nexperia | Voltage Level Translator Bidirectional Tri-State, Non-Inverted 16-QFN T/R RoHS : Compliant |
| 7,680 | ||
| 74LVC1G74GT,115 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 323,503 | ||
| 74AUP1G74GS/S500,X | Nexperia | Low-power D-type flip-flop with set and reset; positive-edge trigger RoHS : Compliant |
| 140,000 | ||
| 74LVC1G74GD,125 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 153,407 | ||
| 74LVC2G74GT,115 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 35,000 | ||
 TME | G7L 5174G | OMRON Corporation | Microswitch SNAP ACTION |
| 9 | |
| 650201474G | AUREL Spa | Module: repeater; LoRa; 868.3MHz; -126dBm; 20mW; 105x105x55mm |
| 0 | ||
| BE7274G/40 | Beta Electric | Boots; Size: 40; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/38 | Beta Electric | Boots; Size: 38; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/42 | Beta Electric | Boots; Size: 42; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/37 | Beta Electric | Boots; Size: 37; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/41 | Beta Electric | Boots; Size: 41; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| B966274 GE033 | Alpha Wire | Wire; Pro-Tekt; 27x2x18AWG; PVC; dark grey; 300V; 100m; 328ft |
| 0 | ||
| 0034.3874.G | Schurter Electronic Components | Fuse: fuse; glass; clip-on; 1.25A; 250VAC; quick blow; FSK RoHS : Compliant |
| 0 | ||
| 76306-74G | KING TONY | Puncher; Ø: 6mm; Tool length: 185mm |
| 0 | ||
| BE7274G/45 | Beta Electric | Boots; Size: 45; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/39 | Beta Electric | Boots; Size: 39; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/43 | Beta Electric | Boots; Size: 43; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| BE7274G/44 | Beta Electric | Boots; Size: 44; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| NSYPLAZT574G | Schneider Electric | Enclosure: wall mounting; X: 500mm; Y: 750mm; Z: 420mm; Thalassa PLA |
| 0 | ||
 Ameya Holding Limited | 74AVC4T774GU/S501X | Nexperia | 748,000 | |||
| RAA2214974GNP#HBK | Renesas Electronics Corporation | 1,500 | ||||
| SN74GTL2003PW | Texas Instruments | IC XLATR BIDIR 8BIT LV 20TSSOP RoHS : Compliant | 1,050 | |||
| BU52074GWZ-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
 ComSIT USA | DF36074GFZV | Renesas Electronics Corporation | AVAILABLE EU RoHS : Compliant | 492 | ||
ComSIT USA | TLE4274GV10 | Infineon Technologies AG | LOW-DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 10V, 0.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 34,440 | ||
| TLE4274GV50 | Infineon Technologies AG | LOW-DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | |||
TLE4274GSV33 | Infineon Technologies AG | VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.2V Dropout, BIPolar, PDSO4 RoHS : Compliant | 6,767 | |||
2SA1774G | onsemi | PNP SILICON GENERAL PURPOSE AMPLIFIER TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant | 3,000 | |||
| TNY274GNTL | Power Integrations | Energy-Efficient, Off-Line Switcher with Enhanced Flexibility and Extended Power Range Switching Regulator, Current-mode, 0.273A, 140kHz Switching Freq-Max, PDSO7 RoHS : Compliant | 1,075 | |||
| UPD780824BGCA374GADE2AX | Renesas Electronics Corporation | Electronic Component RoHS : Compliant | 970 | |||
| TLE4274GSV33GEG | Infineon Technologies AG | VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.2V Dropout, PDSO4 RoHS : Not Compliant | 797 | |||
SN74GTL1655DGGR | Texas Instruments | Registered Bus Transceiver, GTL/TVC Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO64 RoHS : Compliant | 440 | |||
TNY274GN | Power Integrations | ENERGY-EFFICIENT, OFF-LINE SWITCHER Switching Regulator, Current-mode, 0.273A, 140kHz Switching Freq-Max, PDSO7 RoHS : Compliant | 138 | |||
| 74GTL1655DGG | Texas Instruments | Universal Bus Universal Bus Transceiver 16 Bits 3.3V 64-SOP RoHS : Compliant | 25 | |||
| UPD78F0374GK8EU | NEC Electronics Group | 8-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP80 RoHS : Compliant | 20 | |||
| 74GTL16612DL | Texas Instruments | Universal Bus Universal Bus Transceiver 18 Bits 3.3V 56-SOP Tube RoHS : Compliant | 19 | |||
 Interstate Connecting Components | M83723/74G10029 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | |
| M83723/74G14049 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G22558 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G24198 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G18147 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| 189HS010-174G | Glenair Inc | FIBER OPTIC CONNECTOR | 0 | |||
| M83723/74G10069 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G24196 | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| 377HS014-174G | Glenair Inc | FIBER 38999 III IV BACKSHELL STRAIGHT TUBING TO CONNECTOR | 0 | |||
| M83723/74G10067 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G10209 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G20419 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G2255N L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| M83723/74G2419N L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII BAYONET |
| 0 | ||
| Z0174G7C111000E200 | Amphenol FCi | CLIP,SUS T0.15,HEIGHT 3.4 | 0 | |||
 NexGen Digital | BU46L274G-TL | ROHM Semiconductor | RoHS : Compliant | 3,000 | ||
| BU45K274G-TL | ROHM Semiconductor | RoHS : Compliant | 2,950 | |||
| BU46K274G-TL | ROHM Semiconductor | RoHS : Compliant | 2,950 | |||
| SI8274GB1-IS1R | Skyworks Solutions Inc | RoHS : Compliant | 2,500 | |||
| SMC10.2 274G50A31 | KEMET Corporation | 165 | ||||
 PEI Genesis | M83723/74G1006Y | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | |
| M83723/74G20169 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83374G2016Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| M83723/74G10057 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G12127 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G2461N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| 1207-4-GW24 | HellermannTyton |
| 0 | |||
| AE83374G12039 | Aero-Electric Connector Inc |
| 0 | |||
| AE83374G18088 | Aero-Electric Connector Inc |
| 0 | |||
| AE83374G22128 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83374G2219Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83374G24199 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| 6374G1 | Anderson Power Products | RoHS : Compliant |
| 0 | ||
| AE83374G2219N | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83374G2461Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
 Powell Electronics | BH-74G-5-P | Adam Technologies Inc | BATT HOLDER COIN 20MM 1 CELL SMD RoHS : Compliant |
| 6,930 | |
| 1037-4GW8 | HellermannTyton | STRT BOOT BOTTLE ELASTO |
| 94 | ||
 Richardson RFPD | SI5332DD14974-GM2R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | ||
| SI5335B-B06274-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335B-B09574-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5341B-D12474-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5394M-A12874-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| R574G03310 | Radiall | SP3T Terminated Ramses SMA 18GHz Square Flange Nor RoHS : Compliant |
| 0 | ||
| SI5332ED15074-GM2 | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | |||
| SI5341C-D12074-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| SI5395P-A12574-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 644.53125MHz RoHS : Compliant | 0 | |||
| SI8274GB4D-IS1 | Skyworks Solutions Inc | Optocoupler Drive Pull-Up/Down 1-CH 5.5V 1500V Aut RoHS : Compliant |
| 0 | ||
| SI5335D-B07574-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5338C-B08474-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5345A-D06674-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI5335D-B07374-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5335D-B07574-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
 Chip 1 Exchange | 2SA1774GZTLQ | ROHM Semiconductor | INSTOCK | 15,000 | ||
| RT9074GSP | Richtek Technology Corp | INSTOCK RoHS : Compliant | 7,500 | |||
| TNY274GN | POWIN | INSTOCK | 6,295 | |||
| BF074G0683K6V | INSTOCK | 5,300 | ||||
| RSSMOS-2W-274G-ALP | Alpha Wire | INSTOCK | 2,592 | |||
| BF074G0683K6V | Tantalum Pellet Company (TPC) | INSTOCK | 1,250 | |||
| 74G1287 | Cypress Semiconductor | INSTOCK | 800 | |||
| RL07S474G | INSTOCK | 417 | ||||
| RL07S274G | BEISE | INSTOCK | 336 | |||
| RL07S274G | INSTOCK | 336 | ||||
| 63030DE00-074-G | INSTOCK | 200 | ||||
| TLE4274GSV25 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 32 | |||
| SN74GTL1655DGGR | INSTOCK | 12 | ||||
| 767143474G | CTS Corporation | INSTOCK RoHS : Not Compliant | 12 | |||
| TLE4274GSV33 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 2 | |||
 Avnet Abacus | 768143274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 7 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 768143274GP) RoHS : Compliant | 0 | ||
| 767141474GP | CTS Corporation | Fixed Network Resistor 470 kohm Bussed 13 Resistors Gull Wing 2 50 V 150 mW 100ppmC (Alt: 767141474GP) RoHS : Compliant | 0 | |||
| 766141474GP | CTS Corporation | Fixed Network Resistor 470 kohm Bussed 13 Resistors Gull Wing 2 50 V 120 mW 100ppmC (Alt: 766141474GP) RoHS : Compliant | 0 | |||
| 766161274GP | CTS Corporation | Fixed Network Resistor 270 kohm Bussed 15 Resistors Gull Wing 2 50 V 120 mW 100ppmC (Alt: 766161274GP) RoHS : Compliant | 0 | |||
| 768143474GP | CTS Corporation | Fixed Network Resistor 470 kohm Isolated 7 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 768143474GP) RoHS : Compliant | 0 | |||
| 766143274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 7 Resistors Gull Wing 2 50 V 240 mW 100ppmC (Alt: 766143274GP) RoHS : Compliant | 0 | |||
| 767163274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 8 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 767163274GP) RoHS : Compliant | 0 | |||
| 768163474GP | CTS Corporation | Fixed Network Resistor 470 kohm Isolated 8 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 768163474GP) RoHS : Compliant | 0 | |||
| CA50C1474GLT | CTS Corporation | - Tape and Reel (Alt: CA50C1474GLT) RoHS : Compliant | 0 | |||
| BQ074G0683KDA | Kyocera AVX Components | (Alt: BQ074G0683KDA) RoHS : Compliant | 0 | |||
| 766141274GPTR7 | CTS Corporation | Fixed Network Resistor 270 kohm Bussed 13 Resistors Gull Wing 2 50 V 120 mW 100ppmC - Tape and Reel (Alt: 766141274GPTR7) RoHS : Compliant | 0 | |||
| 767141474GPTR13 | CTS Corporation | Fixed Network Resistor 470 kohm Bussed 13 Resistors Gull Wing 2 50 V 150 mW 100ppmC - Tape and Reel (Alt: 767141474GPTR13) RoHS : Compliant | 0 | |||
| CSTLS9M74G53-A0 | Murata Manufacturing Co Ltd | Resonator Ceramic 02 Through Hole 3 Pins 25 Ohms 05 CSTLS (Alt: CSTLS9M74G53-A0) RoHS : Compliant | 0 | |||
| 766141274GPTR13 | CTS Corporation | Fixed Network Resistor 270 kohm Bussed 13 Resistors Gull Wing 2 50 V 120 mW 100ppmC - Tape and Reel (Alt: 766141274GPTR13) RoHS : Compliant | 0 | |||
| 766143474GPTR13 | CTS Corporation | Fixed Network Resistor 470 kohm Isolated 7 Resistors Gull Wing 2 50 V 240 mW 100ppmC - Tape and Reel (Alt: 766143474GPTR13) RoHS : Compliant | 0 | |||
Avnet Asia | RMC74-G222 | Amphenol Corporation | (Alt: RMC74-G222) RoHS : Compliant | 0 | ||
| 74AUP1G74GT,115 | Nexperia | (Alt: 74AUP1G74GT,115) RoHS : Compliant | 0 | |||
| UPC4574G2-A | Renesas Electronics Corporation | (Alt: UPC4574G2-A) RoHS : Compliant | 0 | |||
| 74AUP1G74GN,115 | Nexperia | Flip Flop, 74AUP1G74, D, 5.8 ns, 619 MHz, 4 mA, 8 Pins, XSON (Alt: 74AUP1G74GN,115) RoHS : Compliant |
| 0 | ||
| 74LVC1G74GN,115 | Nexperia | (Alt: 74LVC1G74GN,115) RoHS : Compliant | 0 | |||
| 74AUP1G74GS,115 | Nexperia | (Alt: 74AUP1G74GS,115) RoHS : Compliant | 0 | |||
| RMC74-G218 | Amphenol Corporation | (Alt: RMC74-G218) RoHS : Compliant | 0 | |||
| RMC74-G217 | Amphenol Corporation | (Alt: RMC74-G217) RoHS : Compliant | 0 | |||
| 74AVC4T774GUX | Nexperia | Transceiver, Translating, 4 Input, 12 ns, 0.8 V to 3.6 V, 16 Pins, XQFN (Alt: 74AVC4T774GUX) RoHS : Compliant | 0 | |||
| 74LVC1G74GT,115 | Nexperia | (Alt: 74LVC1G74GT,115) RoHS : Compliant | 0 | |||
| 74LVC2G74GT,115 | Nexperia | Flip Flop, 74LVC2G74, D, 4.1 ns, 280 MHz, 32 mA, 8 Pins, XSON (Alt: 74LVC2G74GT,115) RoHS : Compliant | 0 | |||
UPD78F0474GK-GAK-AX | Renesas Electronics Corporation | (Alt: UPD78F0474GK-GAK-AX) RoHS : Compliant | 0 | |||
| UPC4574G2-E1-A/H | Renesas Electronics Corporation | LINEAR IC OPERATION AMPLIFIER SOP(225) (Alt: UPC4574G2-E1-A/H) RoHS : Compliant | 0 | |||
| S2SA1774G | onsemi | Bipolar (BJT) Single Transistor, PNP, 50 V, 100 mA, 150 mW, SOT-416, Surface Mount (Alt: S2SA1774G) RoHS : Compliant | 0 | |||
| RMC74-G219 | Amphenol Corporation | (Alt: RMC74-G219) RoHS : Compliant | 0 | |||
 Avnet Silica | 74AUP1G74GT,115 | Nexperia | (Alt: 74AUP1G74GT,115) RoHS : Compliant | 20,000 | ||
| 74LVC2G74GS,115 | Nexperia | (Alt: 74LVC2G74GS,115) RoHS : Compliant | 10,000 | |||
| 74LVC1G74GS,115 | Nexperia | (Alt: 74LVC1G74GS,115) RoHS : Compliant | 5,000 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW0-VAO) RoHS : Compliant | 25 | |||
| MP174GS-Z | Monolithic Power Systems | (Alt: MP174GS-Z) RoHS : Compliant | 0 | |||
| MP174GJ-Z | Monolithic Power Systems | (Alt: MP174GJ-Z) RoHS : Compliant | 0 | |||
| MP8774GQ-P | Monolithic Power Systems | (Alt: MP8774GQ-P) RoHS : Compliant | 0 | |||
| 74AUP1G74GN,115 | Nexperia | Flip Flop 74AUP1G74 D 58 ns 619 MHz 4 mA 8 Pins XSON (Alt: 74AUP1G74GN,115) RoHS : Compliant | 0 | |||
| 74LVC1G74GN,115 | Nexperia | (Alt: 74LVC1G74GN,115) RoHS : Compliant | 0 | |||
| 74AUP1G74GS,115 | Nexperia | (Alt: 74AUP1G74GS,115) RoHS : Compliant | 0 | |||
| 74AUP1G374GW,125 | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins TSSOP (Alt: 74AUP1G374GW,125) RoHS : Compliant | 0 | |||
| 74AUP1G374GM,115 | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins XSON (Alt: 74AUP1G374GM,115) RoHS : Compliant | 0 | |||
| MPQ5074GQBE-AEC1-P | Monolithic Power Systems | 55V 3A LOWRDSON LOAD SWITCH WITH ACONFIGURABLE CURRENT LIMIT (Alt: MPQ5074GQBE-AEC1-P) RoHS : Compliant | 0 | |||
| 74AUP1G374GW-Q100H | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins TSSOP (Alt: 74AUP1G374GW-Q100H) RoHS : Compliant | 0 | |||
| IS32LT3174-GRLA3-EB | Lumissil Microsystems | NonIsolated Outputs LED Driver Evaluation Board (Alt: IS32LT3174-GRLA3-EB) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | CSC08A03474GPA | Vishay Dale | IN STOCK SHIP TODAY |
| 2,000 | |
SN74ALVCH162374GR | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,900 | ||
| UPD74HC374GS-T2 | NEC Electronics Group | IN STOCK SHIP TODAY |
| 1,000 | ||
| SN74GTL1655DGGR | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 456 | ||
| A474G | IN STOCK SHIP TODAY |
| 170 | |||
| TLE4274GV50 | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 120 | ||
| AD0612HB-A74GL-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 42 | ||
| TLE4274GV50GEG | Siemens | IN STOCK SHIP TODAY |
| 35 | ||
| RLR20C474GRB14 | CGW | IN STOCK SHIP TODAY | 34 | |||
| A474GA | IN STOCK SHIP TODAY |
| 19 | |||
| TNY274GN | Power Integrations | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| AD0824HB-A74GL-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 13 | ||
| ECQ-P1H474GZ | Panasonic Electronic Components | IN STOCK SHIP TODAY | 5 | |||
| 46-264974G5R | G.E MEDICAL | IN STOCK SHIP TODAY | 1 | |||
| SN74GTL16612D | Texas Instruments | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 1374GF | Heyco | SR 15-1 GREY 2N2993 | 0 | ||
 EBV Elektronik | TNY274GN-TL | Power Integrations | (Alt: TNY274GN-TL) RoHS : Compliant | 18,000 | ||
| S2SA1774G | onsemi | Bipolar BJT Single Transistor PNP 50 V 100 mA 150 mW SOT416 Surface Mount (Alt: S2SA1774G) RoHS : Compliant | 0 | |||
| TNY274GN0152-TL | Power Integrations | PWRTNY274GN0152TL (Alt: TNY274GN0152-TL) RoHS : Compliant | 0 | |||
| TLE4274GV50ATMA2 | Infineon Technologies AG | Fixed LDO Voltage Regulator AECQ100 55V to 40V 250mV Dropout 5V400mA out TO2633 (Alt: SP001130096) RoHS : Compliant | 0 | |||
| TLE4274GV10ATMA2 | Infineon Technologies AG | Low Drop Linear Voltage Regulator Pos 10V 04A 3Pin TO263 TR (Alt: SP001130100) RoHS : Compliant | 0 | |||
| TLE4274GSV25HTMA1 | Infineon Technologies AG | LDO Voltage Regulator 400mA 25V 4Pin SOT223 TR (Alt: SP005122436) RoHS : Compliant | 0 | |||
| TLE4274GSV33HTMA1 | Infineon Technologies AG | LDO Regulator Positive 33V 400mA 4Pin SOT223 TR (Alt: SP004565652) RoHS : Compliant | 0 | |||
| TLE4274GSV33HTSA2 | Infineon Technologies AG | Low Drop Linear Voltage Regulator SD none Std MPP (Alt: SP001130104) RoHS : Compliant | 0 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW0-VAO) RoHS : Compliant | 0 | |||
| TLE4274GSV25HTSA2 | Infineon Technologies AG | Standard Regulator Pos 25V 04A 4Pin SOT223 (Alt: SP001130106) RoHS : Compliant | 0 | |||
| ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW1-VAO) RoHS : Compliant | 0 | |||
 FDH Electronics | MS27474G10F99PC-LC | Corsair Electrical Connectors Inc | Connector |
| 110 | |
| MS27474G10F99PD-LC | Corsair Electrical Connectors Inc | Connector |
| 31 | ||
| MS27474G10F99AD | Corsair Electrical Connectors Inc | Connector |
| 31 | ||
| MS27474G14F15P | Corsair Electrical Connectors Inc | Connector | 1 | |||
| MS27474G14F15P-LC | Corsair Electrical Connectors Inc | Circular Conn |
| 1 | ||
| 1807-4-G-W1 | HellermannTyton | Harness Mgmt | 0 | |||
| 1127-4-G-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| 1037-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1157-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1107-4-G-W24 | HellermannTyton | Heat Shrink Prd | 0 | |||
| 107-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1127-4-G-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| 1807-4-G-W24 | HellermannTyton | Harness Mgmt | 0 | |||
| 1037-4-G-W1 | HellermannTyton | Harness Mgmt | 0 | |||
| 1107-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
 Flip Electronics | S2SA1774G | onsemi | Stock, Ship Today RoHS : Compliant | 77,970 | ||
 Maritex | TL074G-S14-R | Unisonic Technologies Co Ltd | Operational Amplifiers; TL074G-S14-R; UTC RoHS : Compliant |
| 2,460 | |
| U74LVC1G74G-S08-R | Unisonic Technologies Co Ltd | Flip Flops; U74LVC1G74G-S08-R; UTC RoHS : Compliant |
| 1,223 | ||
U74HC574G-P20-R | Unisonic Technologies Co Ltd | Flip Flops; U74HC574G-P20-R; UTC RoHS : Compliant |
| 76 | ||
 Master Electronics | ZLTMM-108-74-G-D-490 | Samtec Inc | Conn Elevated Shrouded Header HDR 16 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | |
| ZLTMM-120-74-G-D-560 | Samtec Inc | Conn Elevated Shrouded Header HDR 40 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| IDSD-05-S-78.74-G | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDSS-02-S-78.74-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-107-74-G-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-107-74-G-D-575 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-118-74-G-D-348 | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
| IDMD-10-T-11.74-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 8020.5074.G | Schurter Electronic Components | SHF 6.3x32 4 A 500 VAC Quick-Acting F Non-Resettable Fuse - 1 000 pc quantity RoHS : Compliant |
| 0 | ||
| IDSD-05-D-15.74-G | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDSS-04-S-76.74-G | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| ZLTMM-104-74-G-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-105-74-G-D-251-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-110-74-G-D-550 | Samtec Inc | Conn Elevated Shrouded Header HDR 20 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| ZLTMM-110-74-G-D-587 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
 Neutron USA | R74G-4AK-RMG | Norgren | Norgren R74G-4AK-RMG Regulator, 1/2" PTF, 220 SCFM, 5 to 150 psig, Gauge, Knob, R74G Series |
| 50 | |
| R74G-4AK-RMN | Norgren | Norgren R74G-4AK-RMN Regulator, 1/2" PTF, 220 scfm, 5 to 150 psig, Knob, R74G Series |
| 47 | ||
| B74G-6AK-AD3-RMG | Norgren | Norgren B74G-6AK-AD3-RMG Filter/Regulator, 3/4" PTF, Metal Bowl, Auto Drain, 5-150 PSI, 40um, B74G Series |
| 19 | ||
| F74G-4AN-QD3 | Norgren | Norgren F74G-4AN-QD3 Filter, 1/2" PTF, Metal Bowl, 250 psig, Manual Drain, 40um, 140 scfm, F74 Series |
| 18 | ||
| R74G-3AK-RMN | Norgren | Norgren R74G-3AK-RMN Regulator, 3/8" PTF, 208 scfm, 5 to 150 psig, Knob, R74G Series |
| 15 | ||
| B74G-6AK-QD1-RMN | Norgren | Norgren B74G-6AK-QD1-RMN Filter/Regulator, 3/4" PTF, Metal Bowl, Man Drain, 5-150 PSI, 5um, B74G Series |
| 12 | ||
| B74G-4AK-AD3-RMN | Norgren | Norgren B74G-4AK-AD3-RMN Filter, 1/2" PTF, Metal Bowl, 250psi, 40um, Auto Drain, B74G Series |
| 11 | ||
| F74G-4AN-QP3 | Norgren | Norgren F74G-4AN-QP3 Filter, 1/2" PTF, Poly Bowl, 150 psig, Manual Drain, 40um, 140 scfm, F74 Series |
| 10 | ||
| F74G-3AN-QP3 | Norgren | Norgren F74G-3AN-QP3 Filter, 3/8" PTF, Poly Bowl, 150 psig, Manual Drain, 40um, 65 scfm, F74 Series |
| 9 | ||
| R74G-4AT-RSG | Norgren | Norgren R74G-4AT-RSG Regulator, 1/2" PTF, 220 scfm, 10 to 250 psig, Gauge, T-Bar, R74G Series |
| 8 | ||
| 9T18Y1074G06 | ABB Low Voltage Products and Systems | Rain Shield Kit, UX_Y74A/C,DY75A/C,DX75C |
| 4 | ||
| R74G-4GK-RMN | Norgren | Norgren R74G-4GK-RMN Regulator, 1/2" G, 220 scfm, 5 to 150 psig, Knob, R74G Series |
| 2 | ||
| M3786/4-5074G | Grayhill Inc | Rotary Switches 44HBS30-04-1-09N |
| 1 | ||
| 2702774, GW EIP/ASCII 2E/2DB9 | Phoenix Contact | Phoenix Contact 2702774 Device Server, RAW/ASCII to Ethernet IP Gateway, 2 Ethernet RJ45, 2 Serial Port |
| 0 | ||
| B67374G0000X197 | TDK Corporation | FERRITE CORE U N97 1PC RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8874/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax. | 419 | ||
| PE3C8874/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 416 | |||
| PE3C8874/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-120 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-300 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax. |
| 63 | ||
| PE3C8874/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 60 | ||
 Sager | ZLTMM-108-74-G-D-490 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| ZLTMM-120-74-G-D-560 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| IDSD-05-S-78.74-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| ZLTMM-107-74-G-D-575 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-118-74-G-D-348 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 8020.5074.G | Schurter Electronic Components | SHF 6.3X32, 4 A, 400 VDC, 500 VAC, QUICK-ACTING F, FUSE RoHS : Compliant |
| 0 | ||
| IDSD-05-D-15.74-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-04-S-76.74-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| ZLTMM-105-74-G-D-251-01 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-110-74-G-D-550 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-110-74-G-D-587 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| SMC157-4-G | ABB Group | Wire Labels & Markers |
| 0 | ||
| LW6J-31C74GRG-501 | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | ||
| LW6J-3C74GGB | IDEC Corporation | Keylock Switches Key Selector Switch ILL | 0 | |||
| LW6ML-A2C74G | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated RoHS : Compliant |
| 0 | ||
 Venkel Ltd. | MEHF0204-TC-1R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;1.74R�2% RoHS : Not Compliant | 0 | ||
| MEHF0204-ZK-1R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;1.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZK-3R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZK-2R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-3R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-2R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-3R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-1R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;1.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-2R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-2R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-1R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;1.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-3R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
 Vyrian | UPC4574GR(5)-9LG-E1-A | Renesas Electronics Corporation | Operational Amplifier, 4 Func, 1000uV Offset-Max, BIPolar, PDSO14 RoHS : Compliant | 12,922 | ||
SN74GTLPH3245ZKFR | Texas Instruments | Bus Transceiver, GTLP Series, 4-Func, 8-Bit, True Output, BICMOS, PBGA114 RoHS : Compliant | 9,871 | |||
| TMS320C6474GUN | Texas Instruments | Digital Signal Processor, 32-Bit Size, CMOS, PBGA561 RoHS : Not Compliant | 8,738 | |||
| SN74GTL2010PW | Texas Instruments | Interface Circuit, CMOS, PDSO24 RoHS : Compliant | 8,412 | |||
| SN74GTL16821DL | Texas Instruments | Bus Driver, GTL/TVC Series, 2-Func, 10-Bit, True Output, BICMOS, PDSO56 RoHS : Not Compliant | 8,108 | |||
74GTLP1395DGVRG4 | Texas Instruments | Bus Transceiver, GTLP Series, 2-Func, 1-Bit, Configurable Output, CMOS, PDSO20 RoHS : Compliant | 6,702 | |||
SN74GTL16616DLG4 | Texas Instruments | Registered Bus Transceiver, GTL/TVC Series, 1-Func, 17-Bit, True Output, BICMOS, PDSO56 RoHS : Compliant | 5,862 | |||
| SN74GTLPH32945GKE | Texas Instruments | Bus Transceiver, GTL/TVC Series, 4-Func, 8-Bit, True Output, CMOS, PBGA114 | 5,621 | |||
74ALVCH162374GRG4 | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 5,457 | |||
| MAX8774GTL-TGA8 | Analog Devices (Maxim Integrated) | 5,423 | ||||
| 74GTLPH16916VRG4 | Texas Instruments | Registered Bus Transceiver, GTLP Series, 1-Func, 17-Bit, True Output, CMOS, PDSO56 RoHS : Compliant | 3,779 | |||
| PT6674G | Texas Instruments | Switching Regulator, 2A, 300kHz Switching Freq-Max, Hybrid, PSMA14 RoHS : Not Compliant | 3,740 | |||
| 74AUP1G374GF | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output, CMOS, PDSO6 RoHS : Compliant | 3,392 | |||
| 74GTLP21395PWRE4 | Texas Instruments | Bus Transceiver, GTLP Series, 2-Func, 1-Bit, Configurable Output, CMOS, PDSO20 RoHS : Compliant | 3,197 | |||
| SN74GTLP1395PWG4 | Texas Instruments | Bus Transceiver, GTLP Series, 2-Func, 1-Bit, Configurable Output, CMOS, PDSO20 RoHS : Compliant | 3,137 | |||
 Win Source Electronics | MP174GJ-Z | Monolithic Power Systems | IC OFFLIN CONV MULT TOP TSOT23-5 RoHS : Compliant |
| 120,000 | |
SN74GTL2014PWR | Texas Instruments | IC SNGL 2IN POS-NOR GATE 14TSSOP RoHS : Compliant |
| 50,000 | ||
| 74AVC4T774GUX | Nexperia | IC TRNSLTR BIDIRECTIONAL 16XQFN RoHS : Compliant |
| 40,000 | ||
| MP8774GQ-Z | Monolithic Power Systems | IC REG 18V 12A HI EFFICIEN 700KH / Switching Regulator IC Output 16-PowerVFQFN RoHS : Compliant |
| 32,400 | ||
| TNY274GN | Power Integrations | AC to DC Switching Converter Off-Line Switcher 140kHz 7-Pin SMD-C / IC OFFLINE SWIT OVP OTP HV 8SMD RoHS : Compliant |
| 25,000 | ||
| TNY274GN-TL | Power Integrations | AC to DC Switching Converter Off-Line Switcher 140kHz 7-Pin SMD-C / IC OFFLINE SWIT OVP OTP HV 8SMD RoHS : Compliant |
| 14,000 | ||
| 74LVC1G74GT | Nexperia | NOW NEXPERIA 74LVC1G74GT - D FLI / Flip Flop Element Bit RoHS : Compliant |
| 10,000 | ||
| TLE4274GV50ATMA2 | Infineon Technologies AG | IC REG LDO 5V 0.4A TO263-3 RoHS : Compliant |
| 9,470 | ||
| SI8274GB1-IM1 | Skyworks Solutions Inc | DGTL ISO 2.5KV 2CH GT DVR 14QFN RoHS : Compliant |
| 2,920 | ||
| SN74GTL2010PWR | Texas Instruments | IC 10BIT VOLTAGE CLAMP 24-TSSOP RoHS : Compliant |
| 773 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand