| Electronic Components Datasheet Search |
|
7521G-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 214752-1053 | Molex | Connector: wire-wire; plug; male; data; Inom: 8.5A; PIN: 5; 3mm; 18AWG |
| 175 | |
| 2475211000 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M8; PIN: 5; male,female; unshielded; plug; 3A RoHS : Compliant |
| 35 | ||
| GKS-075 214 080 A 2000 | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 3A; Ø: 0.8mm; GKS-075; steel; 2N; push-in; 20mΩ |
| 10 | ||
| CT3752-100 | Cal Test Electronics | Test lead: kit; banana plug 4mm,both sides; Inom: 10A; silicone |
| 8 | ||
| S-075 214 130 A 2200 ES | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 5A; Ø: 1.3mm; steel; 2.25N; plug-in; -40÷80°C |
| 0 | ||
| SLY507521Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 21; THT; 3A; 100V |
| 0 | ||
| PT 7,5/2/12 | Block USA Inc. | Transformer: encapsulated; 7.5VA; 230VAC; 12V; 12V; 312.5mA; PCB |
| 0 | ||
| GKS-075 214 100 A 2802 MC | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 3A; Ø: 1mm; GKS-075; steel; 2.8N; screw-in |
| 0 | ||
| PK7521 | ifm efector inc | Converter: pressure |
| 0 | ||
| GKS-075 214 100 A 1502 M | Ingun Prufmittelbau GmbH | Test probe: screw-in; 3A; Ø: 1mm; GKS-075; steel; 1.5N; screw-in |
| 0 | ||
| 0679L0375-21 | Bel Fuse | Fuse: fuse; 6.1x2.54x2.54mm; SMD; 375mA; 125VAC; 125VDC; quick blow RoHS : Compliant |
| 0 | ||
| 1752110001 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: empty; 1.2÷1.6mm; polyamide 66; white RoHS : Compliant |
| 0 | ||
| 2475210150 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M8; PIN: 5; male,female; unshielded,straight RoHS : Compliant |
| 0 | ||
| 3101.7521 | Schurter Electronic Components | Fuse holder; 5x20mm; FPG2 |
| 0 | ||
| 48752-1 | TE Connectivity | Crimping jaws; 8AWG RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 752163470GPTR7A | CTS Corporation | - Tape and Reel (Alt: 752163470GPTR7A) RoHS : Compliant |
| 1,000 | |
| 752101512GPTR7 | CTS Corporation | - Tape and Reel (Alt: 752101512GPTR7) RoHS : Compliant |
| 0 | ||
| 752105121APTR7 | CTS Corporation | - Tape and Reel (Alt: 752105121APTR7) RoHS : Compliant |
| 0 | ||
| 752123330GPTR7 | CTS Corporation | - Tape and Reel (Alt: 752123330GPTR7) RoHS : Compliant |
| 0 | ||
| 752123472GPTR13 | CTS Corporation | - Tape and Reel (Alt: 752123472GPTR13) RoHS : Compliant |
| 0 | ||
| 752181203GPTR13 | CTS Corporation | - Tape and Reel (Alt: 752181203GPTR13) RoHS : Compliant |
| 0 | ||
| 752181331GP | CTS Corporation | - Bulk (Alt: 752181331GP) RoHS : Compliant |
| 0 | ||
| 752181332GPTR7 | CTS Corporation | - Tape and Reel (Alt: 752181332GPTR7) RoHS : Compliant |
| 0 | ||
| 752181822GPTR7 | CTS Corporation | - Tape and Reel (Alt: 752181822GPTR7) RoHS : Compliant |
| 0 | ||
| BFC237521182 | Vishay Intertechnologies | - Bulk (Alt: BFC237521182) RoHS : Compliant |
| 0 | ||
| 1-644752-1 | TE Connectivity | - Bag (Alt: 1-644752-1) RoHS : Compliant |
| 0 | ||
| Y1752100K000V9L | VPG Foil Resistors | Ultra-High Precision Resistor Metal Foil 100kOhm 0.005% Bulk - Bulk (Alt: Y1752100K000V9L) RoHS : Compliant |
| 0 | ||
| XAVE1752-1LLQVSVA1596 | AMD | XAVE1752-1LLQVSVA1596 - Bulk (Alt: XAVE1752-1LLQVSVA1596) RoHS : Compliant |
| 0 | ||
| 752101103GPTR7 | CTS Corporation | - Tape and Reel (Alt: 752101103GPTR7) RoHS : Compliant |
| 0 | ||
| 752125201APTR13 | CTS Corporation | - Tape and Reel (Alt: 752125201APTR13) RoHS : Compliant |
| 0 | ||
![]() Newark | ZW-08-10-G-D-475-215 | Samtec Inc | Conn Stack Brd, 2.54Mm, 16Pos, Hdr; |Samtec, Inc. ZW-08-10-G-D-475-215 RoHS : Compliant |
| 869 | |
| 219675-2112 | Molex | Cable Assy, Crimp Socket-Free End, 150Mm; |Molex 219675-2112 RoHS : Compliant |
| 100 | ||
| 217521-1124 | Molex | Mizu-P25 F-S 300Mm 0.5 Sqmm Lead Bk Sn Rohs Compliant: Yes |Molex 217521-1124 RoHS : Compliant |
| 100 | ||
| 2775210 | Phoenix Contact | Terminal Block, 4Pos, 1Level, 16A, 630V; |Phoenix Contact 2775210 RoHS : Compliant |
| 92 | ||
| 1752117 | Phoenix Contact | Terminal Block, Wire To Brd, 3Pos, 16Awg; |Phoenix Contact 1752117 RoHS : Compliant |
| 67 | ||
BZX84-B75,215![]() | Nexperia | Zener Array Diodes; |Nexperia BZX84-B75,215 RoHS : Compliant |
| 55 | ||
BZX84-B75,215![]() | Nexperia | Zener Array Diodes; |Nexperia BZX84-B75,215 RoHS : Compliant |
| 55 | ||
| 214752-1063 | Molex | Cable Assy, Micro-Fit Plug/Plug, 600Mm; |Molex 214752-1063 RoHS : Compliant |
| 50 | ||
| 214752-1101 | Molex | Cable Assy, Micro-Fit Plug/Plug, 150Mm; |Molex 214752-1101 RoHS : Compliant |
| 45 | ||
| 7521-40002 | Amphenol SV Microwave | Rf Coax Conn, Smpm, Jack, 75 Ohm, Crimp; Connector Type:Smpm Coaxial; Connector Body Style:Straight Jack; Coaxial Termination:Solder, Crimp; Impedance:75Ohm; Coaxial Cable Type:Belden 1672A; Contact Material:Beryllium Copper Rohs Compliant: Yes RoHS : Compliant |
| 25 | ||
| 214752-1063 | Molex | Wtb Cable, Micro-Fit Plug-Plug, 23.6"; Connector To Connector:Micro-Fit 3.0 Plug To Micro-Fit 3.0 Plug; No. Of Positions:6Positions; Connector Pitch:3Mm; No. Of Rows:1 Row; Cable Length - Metric:600Mm; Cable Length - Imperial:23.6" Rohs Compliant: Yes RoHS : Compliant |
| 25 | ||
| PT 7.5/2/15 | Block USA Inc. | Transformer, 7.5Va, 2 X 15V; |Block PT 7.5/2/15 RoHS : Compliant |
| 22 | ||
| 677-521-21 | MARL International Limited | Led Panel Indicator, Yellow, 8.1Mm/12Vdc; |Marl 677-521-21 RoHS : Compliant |
| 4 | ||
| FMCA9752-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, Vita 67, 12", 305Mm; |Fairview Microwave FMCA9752-12 RoHS : Not Compliant |
| 3 | ||
| 11"BNC-75-2-15/133"NE | HUBER+SUHNER | Rf Coax Conn, Bnc Plug, 75 Ohm, Cable; |Huber+Suhner 11"BNC-75-2-15/133"NE RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MX7521JN+ | Analog Devices Inc | CMOS, 14- and 12-Bit Multiplyi RoHS : Compliant | 5,894 | ||
| MAX17521ATG+T | Analog Devices Inc | 60V, 1A Dual Synchronous Buck RoHS : Compliant |
| 506 | ||
| MAX17521ATG+ | Analog Devices Inc | 60V, 1A Dual Synchronous Buck RoHS : Compliant |
| 194 | ||
| MAX17521EVKITE# | Analog Devices Inc | Evkit for 4.5V to 60V, 1A, Dua |
| 17 | ||
| MAX17521EVKITA# | Analog Devices Inc | Evkit for 60V, 1A Dual Synchro |
| 12 | ||
| ADP1752-1.5-EVALZ | Analog Devices Inc | Evaluation Board 1.5Vout RoHS : Compliant |
| 9 | ||
![]() RS | 175217-2 | TE Connectivity | DYNAMIC 3000 PCB CONN CONTACT FEMALE CRIMP GOLD PLATING 24 - 20 AWG RoHS : Compliant |
| 774 | |
| 66254475215 | Norton Winter | BLAZE CLOTH FILLE BELT 120 GRIT R980P CA, 1/8 X 18 IN. |
| 50 | ||
| 6ES75211BH100AA0 | Siemens | PLC EXPANSION MODULES, 16 DIGITAL IN, 24 VDC BA, S7-1500 SERIES |
| 28 | ||
| 2907521 | Phoenix Contact | ECOR-2-BSC3/4X21 |
| 13 | ||
| 3752 (1632346) | Pomona Electronics | ENCLOSURE, CONNECTORIZED, ALUMINUM, BLUE, 1.5X1.13X0.88 IN,1 FEMALE BNC,1 MALE BNC |
| 7 | ||
| 704.075.218 | EAO AG | STOP ACTUATOR,40MM, MAINT, FLUSH, WHITE ARROW LEGENDS, TWIST-TO-RELEASE, IP65,RED RoHS : Compliant |
| 6 | ||
| 75210 | Wiha Quality Tools | INSULATED TWEEZERS SERRATED, STRAIGHT BLUNT 130MM OAL (5 |
| 5 | ||
| 61463617521 | Norton Winter | CHARGER RESIN BOND MOUNTED POINT W220 CHARGER 30 GRIT 30 GRIT, 1 X 1/4 IN. |
| 5 | ||
| 13057521 | Southwire Company LLC | UNDERGROUND FEEDER AND BRANCH CIRCUIT CABLE, 14-3 UF W/G, GRAY |
| 4 | ||
| 7521999 | RS Pro | BRUSHED DC GEARED MOTOR 6V 173GCM 230RPM 0.46W 170MA SPUR GEARHEAD |
| 3 | ||
| 750752-1 | TE Connectivity | BACKSHELL KIT, SHIELDED, BLACK ZINC, 68 POSITION, STRAIGHT, D SHAPED RoHS : Not Compliant |
| 2 | ||
| 6ES75211BL100AA0 | Siemens | PLC EXPANSION MODULES, 32 DIGITAL INPUTS, 24 VDC, S7-1500 SERIES |
| 2 | ||
| 1837521 | RS Pro | ULTRASONIC CLEANING RING RACK FOR 3L TAN |
| 1 | ||
| 3375212 | RS Pro | 3PIN BS1363 CHARGER FOR 30WCORDLESS IRON |
| 1 | ||
| A9075219 | OKW Enclosures Inc | ENCLOSURE;HANDHELD;ABS(UL94HB);NO BATT COMPARTMENT;9.921X4.764X1.969IN;BLACK |
| 1 | ||
![]() Microchip Technology Inc | PIC17C752-16/PT![]() | Microchip Technology Inc | MCU CMOS 64 LD 16MHZ 8K EPRM, TQFP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 5,280 | |
PIC17C752-16I/PT![]() | Microchip Technology Inc | MCU CMOS 64 LD 16MHZ 8K EPRM, TQFP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 640 | ||
PIC17C752-16/L![]() | Microchip Technology Inc | MCU CMOS 68 LD 16MHZ 8K EPRM, PLCC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 634 | ||
| PIC7521 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 64 | ||
![]() Rochester Electronics | BZB84-B75,215![]() | NXP Semiconductors | Zener Diode Array 75V 300mW SOT-23-3 T/R RoHS : Compliant |
| 11,278 | |
BZX84-C75,215![]() | NXP Semiconductors | Zener Diode Single 75V 250mW SOT-23-3 T/R RoHS : Compliant |
| 149,500 | ||
BZX84-B75,215![]() | NXP Semiconductors | Zener Diode Single 75V 250mW SOT-23-3 T/R RoHS : Compliant |
| 161,785 | ||
BZB84-B75,215![]() | Nexperia | Zener Diode Array 75V 300mW SOT-23-3 T/R RoHS : Compliant |
| 17,900 | ||
BZX84-C75,215![]() | Nexperia | Zener Diode Single 75V 250mW SOT-23-3 T/R RoHS : Compliant |
| 69,402 | ||
BZX84-B75,215![]() | Nexperia | Zener Diode Single 75V 250mW SOT-23-3 T/R RoHS : Compliant |
| 71,900 | ||
| MAX17521ATG+ | Analog Devices Inc | IC VOLT REG Adjustable Step-Down Buck 2 OUT 900mV - 55.2V 1A 24-QFN Tray RoHS : Compliant |
| 390 | ||
| ADV7521NKBCBZRL-80 | Analog Devices Inc | Video Processor 49-BGA T/R RoHS : Compliant |
| 641 | ||
ISO7521CDW![]() | Texas Instruments | Digital Isolators General Purpose 25kV/µs 16-SOIC Tube RoHS : Compliant |
| 40 | ||
TPS75218QPWPR![]() | Texas Instruments | IC SPDT 2:1 3 5V, ±4.5V - 16.5V, ±16.5V 16-SOP T/R RoHS : Compliant |
| 6,998 | ||
TPS75218QPWPRQ1![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 2A 20-SOP Rail RoHS : Compliant |
| 8,000 | ||
AD7521LN![]() | Intersil Corporation | IC DAC 1 CONV 12Bits Multiplying DAC Parallel 18-DIP Tube RoHS : Not Compliant |
| 364 | ||
MX7521JN![]() | Maxim Integrated Products | IC DAC 1 CONV 12Bits Multiplying DAC Parallel 18-DIP Tube RoHS : Not Compliant |
| 2,019 | ||
MX7521KCWN![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.5us Settling Time, PDSO18 RoHS : Not Compliant |
| 350 | ||
MX7521KN![]() | Maxim Integrated Products | IC DAC 1 CONV 12Bits Multiplying DAC Parallel 18-DIP Tube RoHS : Not Compliant |
| 2,194 | ||
![]() Sager | C13-X0-23-175-21A-KG | Carling Technologies | Circuit Breakers | 0 | ||
| 1-644752-1 | TE Connectivity | Headers & Wire Housings 11P MTA156 HDR ASSY RoHS : Compliant |
| 0 | ||
| 1752166 | Phoenix Contact | Pluggable Terminal Blocks 3 Pos 5mm pitch Through Hole Header RoHS : Compliant | 0 | |||
| 2147521062 | Molex | DC Power Cords MICROFIT 3.0 SR P-P 6CKT RoHS : Compliant |
| 0 | ||
| 2175212123 | Molex | Specialized Cables MIZU-P25 F-S 225MM 0.5 SQMM RoHS : Compliant |
| 0 | ||
| 2-1775210-1 | TE Connectivity | D-SUB 5.08MM,9 POS PLUG OVER 15 POS RCPT RoHS : Compliant |
| 0 | ||
| 20004752-16 | TE Connectivity | TE Connectivity 154BSD030PG-3ASR |
| 0 | ||
| 2907521 | Phoenix Contact | Relay Sockets & Hardware ECOR-2-BSC3/4X21 |
| 0 | ||
| 1847521 | Phoenix Contact | Pluggable Terminal Blocks 8 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| 5775217 | Phoenix Contact | Pluggable Terminal Blocks BCP-508- 6 BD:1-6 RoHS : Compliant | 0 | |||
| 6-1337521-0 | TE Connectivity | RF Connectors / Coaxial Connectors BNC LP Shld PCB Skt 50Ohm Bulk RoHS : Compliant | 0 | |||
| CG1-X0-07-521-33X-MG | Carling Technologies | Circuit Breakers | 0 | |||
| 9752102022 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752103120 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752103157 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Coilcraft Direct | BU15-7521R0BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 315 | |
![]() Ameya Holding Limited | BZX84-C75,215![]() | NXP Semiconductors | RoHS : Compliant | 9,000 | ||
TPS75215QPWPR![]() | Texas Instruments | IC REG LDO 1.5V 2A 20HTSSOP RoHS : Compliant | 2,385 | |||
BZX84-A75,215![]() | NXP Semiconductors | RoHS : Compliant | 488 | |||
| BD87521G-LBTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD87521YG-CTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
ISO7521CDWR![]() | Texas Instruments | DGTL ISO 4.243KV GEN PURP 16SOIC RoHS : Compliant | 58 | |||
BD37521FS-E2![]() | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
![]() ComSIT USA | C0603C470J5GAC75217867 | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000047uF, Surface Mount, 0603 RoHS : Compliant | 48,000 | ||
| P0752154NLT | Pulse Electronics Corporation | Electronic Component RoHS : Compliant | 11,198 | |||
| T491B106K010AS7521 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 10% +Tol, 10% -Tol, 10uF, Surface Mount, 1411 RoHS : Not Compliant | 6,000 | |||
| C0805C105K8RAC75217800 | KEMET Corporation | Multilayer Ceramic Capacitor 1 uF 10 V 10 X7R 0805 2012 Metric RoHS : Compliant | 4,000 | |||
| P0752105NLT | Pulse Electronics Corporation | Electronic Component RoHS : Compliant | 2,590 | |||
| T491C685K035AS72807521 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 35V, 10% +Tol, 10% -Tol, 6.8uF, Surface Mount, 2413 RoHS : Not Compliant | 1,805 | |||
| 7427521 | Adolf Wuerth Gmbh & Co Kg | WE-CMS SMT BEAD ARRAY Ferrite Bead, 1 Function(s), 5A, 4 Pin(s) RoHS : Compliant | 1,435 | |||
| Q160JXE752125050T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| MB675214 | FUJITSU Limited | Electronic Component RoHS : Not Compliant | 988 | |||
| T494D226M025AS7521 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 2917 RoHS : Not Compliant | 485 | |||
| 634008137521 | Adolf Wuerth Gmbh & Co Kg | HORIZONTAL SHIELDED SMT WITH LED AND EMI PANEL FINGER 8P8C Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Jack RoHS : Compliant | 180 | |||
| 634308137521 | Adolf Wuerth Gmbh & Co Kg | HORIZONTAL SHIELDED SMT WITH LED AND EMI PANEL FINGER 8P8C MODULAR JACK TAB UP Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Jack RoHS : Compliant | 139 | |||
| 11MCX7521113NE | HUBER+SUHNER | STRAIGHT CABLE PLUG RF MCX Connector, 1 Contact(s), Male, Cable Mount, Crimp Terminal, Locking, Plug RoHS : Not Compliant | 81 | |||
![]() Interstate Connecting Components | 2-1775210-1 | TE Connectivity | D-SUB 5.08MM,9 POS PLUG OVER 1 RoHS : Compliant | 0 | ||
| 20004752-16 | TE Connectivity | 154BSD030PG-3ASR | 0 | |||
| C10-752161-000 | Amphenol Industrial Operations | REC CONNECTOR, 2 POS(1500V) | 0 | |||
| 155675-2140 | ITT Interconnect Solutions | MKJ4C4Z10-26D | 0 | |||
| 1897752-1 | TE Connectivity | 090II MLC TAB(SS) CONTACT RoHS : Compliant |
| 0 | ||
| 10-752153-001 | Amphenol Industrial Operations | BUSBAR RECEPTACLE. AMPHE-PD 10-752153-001 | 0 | |||
| 10-752163-000 | Amphenol Industrial Operations |
| 0 | |||
| C10-752157-000 | Amphenol Industrial Operations | PLUG CONNECTOR, 2 POS, 8AWG 3.6MM PLUG CONNECTOR, AMP |
| 0 | ||
| 91-569752-13P | Amphenol Aerospace |
| 0 | |||
| 20004752-15 | TE Connectivity | 154BSD030PG-3AIR | 0 | |||
| 20004752-14 | TE Connectivity | 154BSD015PG-3ASR | 0 | |||
| 121617-5214 | ITT Interconnect Solutions | VG95328M24-61PNJ | 0 | |||
| 75-214224-11P | Amphenol Industrial Operations | 0 | ||||
| 75-214224-11P | Amphenol Industrial Operations |
| 0 | |||
| C10-752153-001 | Amphenol Industrial Operations | AMPHE-PD AMPHE-PD BUSBARL RECE | 0 | |||
![]() NexGen Digital | 752101103G | CTS Corporation | RoHS : Not Compliant | 17 | ||
![]() PEI Genesis | 5020.075.216 | FLEXA GmbH & Co Produktion und Vertrieb KG |
| 2 | ||
| C10-752157-000 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| C10-752158-000 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| C10-752159-000 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 100752-1 | TE Connectivity | Connectors RoHS : Compliant |
| 2,488 | |
| ZW-08-10-G-D-475-215 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 574 | ||
| ZW-20-11-G-D-475-210 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 201 | ||
| 2307521-1 | TE Connectivity | Solar Connectors / Photovoltaic Connecto |
| 94 | ||
| 30-S378H-375-21 | Aries Electronics Inc | STAX STIXCONN 30P |
| 59 | ||
| 1-2307521-2 | TE Connectivity | Solar Connectors / Photovoltaic Connecto |
| 48 | ||
| 1-2307521-5 | TE Connectivity | Solar Connectors / Photovoltaic Connecto |
| 42 | ||
| 88-443752-16P | Amphenol Corporation | PLUG |
| 27 | ||
| 88-443752-16R | Amphenol Corporation | PLUG |
| 27 | ||
| 75-214618-12S | Amphenol Corporation | CONNECTOR |
| 10 | ||
| 75-214616-1S | Amphenol Corporation | CONNECTOR |
| 5 | ||
| 75-214128-12S | Amphenol Corporation | CONNECTOR |
| 5 | ||
| 75-214618-10P | Amphenol Corporation | CONNECTOR |
| 1 | ||
| 87-443752-16P | Amphenol Corporation | PLUG |
| 1 | ||
| 75-214640-56P | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() PUI | 2012-2X05G00S-2.8-7.5-21. | 2,000 | ||||
![]() Chip 1 Exchange | 175218-2 | TE Connectivity | INSTOCK RoHS : Compliant | 95,739 | ||
| 105-35075-2123 | INSTOCK | 8,293 | ||||
| CM316Y5V475216AT | Kyocera AVX Components | INSTOCK | 4,643 | |||
| C1206C684K3RAC75217800 | INSTOCK | 2,802 | ||||
| 752181103GPTR7 | CTS Corporation | INSTOCK RoHS : Compliant | 1,648 | |||
BZB84-B75,215![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 1,558 | |||
| 1-1775210-1 | INSTOCK | 800 | ||||
| 752181102GPTR | CTS Corporation | INSTOCK | 500 | |||
| 1-1775210-1 | TE Connectivity | INSTOCK RoHS : Compliant | 157 | |||
| 747521-100 | TE Connectivity | INSTOCK | 94 | |||
| KH8-9975-218-8-2R7-10% | INSTOCK | 80 | ||||
| 11BNC75-2-15/133 | INSTOCK | 74 | ||||
![]() Avnet Abacus | 1-175218-5 | TE Connectivity | Heavy Duty Connector Contact Dynamic D3000 Socket 16 AWG Crimp Copper (Alt: 1-175218-5) RoHS : Compliant | 10,000 | ||
| 175218-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Bag (Alt: 175218-2) RoHS : Compliant | 6,000 | |||
| 1752104 | Phoenix Contact | WireToBoard Terminal Block 35 mm 2 Ways 24 AWG 16 AWG 15 mm Push In (Alt: 1752104) RoHS : Compliant | 200 | |||
| 1752117 | Phoenix Contact | WireToBoard Terminal Block 35 mm 3 Ways 24 AWG 16 AWG 15 mm Push In (Alt: 1752117) RoHS : Compliant | 100 | |||
| 1752120 | Phoenix Contact | WireToBoard Terminal Block 35 mm 4 Ways 24 AWG 16 AWG 15 mm Push In (Alt: 1752120) RoHS : Compliant | 100 | |||
| 747521101 | Molex | (Alt: 747521101) RoHS : Compliant | 0 | |||
| 747521101 | Molex | (Alt: 747521101) RoHS : Compliant | 0 | |||
| 752181331GP | CTS Corporation | Fixed Network Resistor 330 ohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film (Alt: 752181331GP) RoHS : Compliant | 0 | |||
| 752101512GPTR7 | CTS Corporation | Fixed Network Resistor 51 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film - Tape and Reel (Alt: 752101512GPTR7) RoHS : Compliant | 0 | |||
| 752105121APTR7 | CTS Corporation | Fixed Network Resistor 180ohm390ohm Dual Terminator 2 25 V 120 mW 200ppmC Array - Tape and Reel (Alt: 752105121APTR7) RoHS : Compliant | 0 | |||
| 752123330GPTR7 | CTS Corporation | Fixed Network Resistor 33 ohm Isolated 6 Resistors 2 25 V 240 mW 200ppmC Array - Tape and Reel (Alt: 752123330GPTR7) RoHS : Compliant | 0 | |||
| 752181332GPTR7 | CTS Corporation | Fixed Network Resistor 33 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film - Tape and Reel (Alt: 752181332GPTR7) RoHS : Compliant | 0 | |||
| 752181822GPTR7 | CTS Corporation | Fixed Network Resistor 82 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film - Tape and Reel (Alt: 752181822GPTR7) RoHS : Compliant | 0 | |||
| 752123472GPTR13 | CTS Corporation | Fixed Network Resistor 47 kohm Isolated 6 Resistors 2 25 V 240 mW 200ppmC Array - Tape and Reel (Alt: 752123472GPTR13) RoHS : Compliant | 0 | |||
| 752181203GPTR13 | CTS Corporation | Fixed Network Resistor 20 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film - Tape and Reel (Alt: 752181203GPTR13) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BZX84-C75,215![]() | Nexperia | Diode Zener Single 74.5V 5% 250mW 3-Pin SOT-23 T/R (Alt: BZX84-C75,215) RoHS : Compliant | 0 | ||
| 10124752-101LF | Amphenol Corporation | (Alt: 10124752-101LF) RoHS : Compliant | 0 | |||
BZX84-B75,215![]() | Nexperia | Diode Zener Single 75V 2% 250mW 3-Pin SOT-23 T/R (Alt: BZX84-B75,215) RoHS : Compliant | 0 | |||
BZX84-A75,215![]() | Nexperia | Diode Zener Single 75V 1% 250mW 3-Pin SOT-23 T/R (Alt: BZX84-A75,215) RoHS : Compliant | 0 | |||
| 10124752-12JLF | Amphenol Corporation | (Alt: 10124752-12JLF) RoHS : Compliant | 0 | |||
| 10124752-11JLF | Amphenol Corporation | (Alt: 10124752-11JLF) RoHS : Compliant | 0 | |||
| P0752.154NLT | Pulse Electronics Corporation | Power Inductor (SMD), 150 uH, ? 20%, 1 A, Unshielded, 1 A, 12.95mm x 9.4mm x 5.46mm (Alt: P0752.154NLT) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | FT7521L6X | onsemi | Timer IC Reset 1 18 V to 5 V 6 Pins MicroPak (Alt: FT7521L6X) RoHS : Compliant | 0 | ||
BZB84-B75,215![]() | Nexperia | Diode Zener Dual Common Anode 75V 2 300mW 3Pin SOT23 TR (Alt: BZB84-B75,215) RoHS : Compliant | 0 | |||
BZX84-C75,215![]() | Nexperia | Diode Zener Single 745V 5 250mW 3Pin SOT23 TR (Alt: BZX84-C75,215) RoHS : Compliant | 0 | |||
BZX84-B75,215![]() | Nexperia | Diode Zener Single 75V 2 250mW 3Pin SOT23 TR (Alt: BZX84-B75,215) RoHS : Compliant | 0 | |||
BZB84-C75,215![]() | Nexperia | Diode Zener Dual Common Anode 745V 5 300mW 3Pin SOT23 TR (Alt: BZB84-C75,215) RoHS : Compliant | 0 | |||
BZX84-A75,215![]() | Nexperia | Diode Zener Single 75V 1 250mW 3Pin SOT23 TR (Alt: BZX84-A75,215) RoHS : Compliant | 0 | |||
PIC17C752-16/L![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 68Pin PLCC Tube (Alt: PIC17C752-16/L) RoHS : Compliant | 0 | |||
PIC17C752-16/PT![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 64Pin TQFP Tray (Alt: PIC17C752-16/PT) RoHS : Compliant | 0 | |||
PIC17C752-16I/L![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 68Pin PLCC Tube (Alt: PIC17C752-16I/L) RoHS : Compliant | 0 | |||
| C17521_LISA4-RS | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 16 Spot Beam PMMA Clear (Alt: C17521_LISA4-RS) RoHS : Compliant | 0 | |||
| NCV75215DB001R2G | onsemi | Ultrasonic Proximity Sensor 90 kHz 45 m 16 Pins TSSOP (Alt: NCV75215DB001R2G) RoHS : Compliant | 0 | |||
PIC17C752-16I/PT![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 64Pin TQFP Tray (Alt: PIC17C752-16I/PT) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | BFC236752103 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 6,500 | |
| 2222-367-52103 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 6,500 | ||
| 09-75-2124 | Molex | IN STOCK SHIP TODAY |
| 900 | ||
| 09-75-2154 | Molex | IN STOCK SHIP TODAY | 820 | |||
| 09-75-2184 | Molex | IN STOCK SHIP TODAY | 800 | |||
| P0752.154T | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 770 | ||
| 752101103GTR7 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 293 | ||
| 752105500AGTR | CTS Corporation | IN STOCK SHIP TODAY |
| 170 | ||
| 752101103G | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 105 | ||
| 752105131APB | CTS Corporation | IN STOCK SHIP TODAY |
| 42 | ||
| 747521-1 | TE Connectivity | IN STOCK SHIP TODAY | 25 | |||
| 530752-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| P0752.154NLT | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| 750752-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| 2715-7521-004 | Applied Engineering Products (AEP) | IN STOCK SHIP TODAY RoHS : Unknown | 1 | |||
![]() DB Roberts | MS35275-215 | Military Specifications |
| 119 | ||
| AT75210329 | RAF Electronic Hardware | 0 | ||||
| 97-50-375-21 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 13RS137521B | Essentra Components | ROUND SPACER, .766 ID, 1.375 O | 0 | |||
| 07521-08808 | Avdel | SPACER | 0 | |||
| 17W07521 | Essentra Components | FLAT WASHER, .320 ID, .750 OD, | 0 | |||
| N7-52-10 | Southco | Speed-up panel replacement and take advantage of captive fastening even with screw-side panels using threaded studs. Large knurled knob design allows for quick and easy fastening and enables user to control amount of torque applied. | 0 | |||
| 07521-08984 | Avdel | HD FORM NOSE-4MM HEXSERT | 0 | |||
| 13RS037521B | Essentra Components | ROUND SPACER, .218 ID, .375 OD | 0 | |||
| 7521-B-1032-SS | RAF Electronic Hardware | 0 | ||||
| 97-50-175-21 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 13RS037521 | Essentra Components | ROUND SPACER, .218 ID, .375 OD | 0 | |||
| 07521-08804 | Avdel | DRIVE SHAFT | 0 | |||
| A5-55-0752-10 | Southco | 0 | ||||
| 97-52-101-31 | Southco | 0 | ||||
![]() EBV Elektronik | NCV75215DB001R2G | onsemi | Ultrasonic Proximity Sensor 90 kHz 45 m 16 Pins TSSOP (Alt: NCV75215DB001R2G) RoHS : Compliant | 4,000 | ||
| C17521_LISA4-RS | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 16 Spot Beam PMMA Clear (Alt: C17521_LISA4-RS) RoHS : Compliant | 0 | |||
| SGM8752-1XN5G/TR | SG Micro Corp | (Alt: SGM8752-1XN5G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NCV75215DB001R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 68,000 | |
| FT7521L6X | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
![]() Master Electronics | 752101103GPTR7 | CTS Corporation | 9 Resistor Bussed Circuit Network - 10 Kohm (+/-) 2% - 80mW - SMD 10SRT - RoHS RoHS : Compliant |
| 4,180 | |
| 1-644752-1 | TE Connectivity | 11P MTA156 HDR ASSY SQ STR F/L RoHS : Compliant |
| 800 | ||
| P0752.104NLT | Pulse Electronics Corporation | P0751/P0752 SMT Unshielded Drum Core Inductor series up to 6.8A RoHS : Compliant |
| 500 | ||
| 1-1617521-0 | TE Connectivity | 2RFBC 2 POLE RF 4. RoHS : Not Compliant |
| 7 | ||
| 121575-2136 | ITT Interconnect Solutions | Circular Connector - Wall Mount - Contact Arangement: 20-18 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121575-2181 | ITT Interconnect Solutions | Circular Connector - Cable Mount - Contact Arrangement: 18-10 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 2-1775210-1 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 20004752-16 | TE Connectivity | 154BSD030PG-3ASR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2907521 | Phoenix Contact | ECOR-2-BSC3/4X21 RoHS : Compliant |
| 0 | ||
| 1847521 | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 320 V - nominal cross section: 1.5 mm² - number of positions: 8 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.4 mm RoHS : Compliant |
| 0 | ||
| 2828752-1 | TE Connectivity | Connectors Terminal Blocks RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-175-213 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 775210N006 | TE Connectivity | S01-03-RCS2871 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| FW-02-03-F-D-175-214 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MS1-B-12-475-2-1CB-A-0AA | Carling Technologies | MS1B1247521CBA0AA RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1752162 | Phoenix Contact | Fixed Terminal Blocks SPTA 1/8-3.5 8P 3.50MM RoHS : Compliant |
| 50 | |
| 09160752101 | HARTING Technology Group | Heavy Duty Power Connectors Han 75DDD FEMALE CRIMP INSERT RoHS : Compliant |
| 50 | ||
| C10-752158-000 | Amphenol Corporation | Heavy Duty Power Connectors CRIMP PLUG AWG6 BLACK 3.6MM RoHS : Compliant |
| 50 | ||
| P7-521122 | OTTO Engineering Inc | Basic / Snap Action Switches Standard Sldr 5A SPST-DB, SPDT-DB |
| 50 | ||
| P7-521121 | OTTO Engineering Inc | Basic / Snap Action Switches Standard Sldr 5A SPST-DB, SPDT-DB |
| 11 | ||
| P7-521222 | OTTO Engineering Inc | Basic / Snap Action Switches Low-Level Mil Sldr 5A SPST-DB, SPDT-DB |
| 3 | ||
| DA75-21A-11-84 | ABB Low Voltage Products and Systems | Drive Contactor, 3P 2NO 1NC, Aux: 1/1, 60A, 120VAC Coil |
| 0 | ||
| 2775210 | Phoenix Contact | Knife disconnect DIN Rail Terminal Blocks UDK 4-MTK-P/P - One TB RoHS : Compliant |
| 0 | ||
| PK7521 | ifm efector inc | Pressure switch, R: 0-3625psi, 9.6-32VDC, 2 PNP NO, Process: G 1/4 Ext, M12 Conn |
| 0 | ||
| 3101.7521 | Schurter Electronic Components | Fuse Holder FPG1/2/6 CARRIER 5X20 IP 67 |
| 0 | ||
| 1975215 | Phoenix Contact | Pluggable Terminal Blocks 16 Pos 5.08mm pitch Plug 24-12AWG Spring RoHS : Compliant |
| 0 | ||
| DEV-17521 | SparkFun Electronics | LED Display Drivers SmartLED Shield - Teensy 4 |
| 0 | ||
| 747521101-AO | AddOn Networks | AddOn Molex® 747521101 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 1m) |
| 0 | ||
| 747521301-AO | AddOn Networks | AddOn Molex® 747521301 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) |
| 0 | ||
| WTB4SL-3P3161 / 1075216 | SICK AG | Proximity Sensor, Background Suppression, 300mm, 10-30VDC, Laser, PNP, W4 Series 1075216 |
| 0 | ||
![]() Pasternack Enterprises US | PE410-06575-210 | Pasternack Enterprises |
| 144 | ||
| PE3C10752-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-12 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-12 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-12 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-12 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10752-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-18 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-18 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-18 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-18 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE7752-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: F, Connector-In Gender: Male, Connector-Out Series: F, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 10 dB Fixed Attenuator 75 Ohm F-Type Male to 75 Ohm F-Type Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7752-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7752-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.25:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with F-type connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This F-type attenuator has a male gender on side 1 and a F-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7752-10 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7752-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE3FCA752-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-10M. Pasternack’s PE3FCA752-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE37521LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. | 0 | |||
| PE3W07521 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using PE-C200 Coax. PE3W07521 is a N female bulkhead to SMA male cable using PE-C200 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07521 N female bulkhead to SMA male cable assembly is constructed with PE-C200 coax. | 0 | |||
| PE3C9752-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Male to SMP Female VITA 67 Cable 12 Inch Length Using PE-P086HF Coax with HeatShrink., Radio frequency assembly mini SMP male to SMP female VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP male to SMP female VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and SMP cable connection on the other. Our vita 67 mini SMP to SMP cable assemblies have a male gender on end 1 and female on end 2. PE3C9752-12 can also be known as a vita 67 mini SMP plug to SMP jack cable assembly and will be shipped same-day as it is purchased. Mini SMP plug to SMP jack cable assembly PE3C9752-12 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to SMP cable connectors, has a 50 Ohm impedance. RF specs on this 18 GHz maximum frequency mini SMP male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9752-12 can also be used in the other direction and will be SMP female to mini SMP male cable assembly if the opposite connectivity is required. Vita 67 mini SMP plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP male to SMP female VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink. |
| 0 | ||
| PE3FCA752-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-1M. Pasternack’s PE3FCA752-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W17521/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to Reverse Polarity TNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W17521/HS is a reverse polarity TNC female bulkhead to reverse polarity TNC male right angle cable using LMR-100A coax. This Pasternack reverse polarity TNC female bulkhead to reverse polarity TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC bulkhead to reverse polarity male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17521/HS TNC reverse polarity female bulkhead to TNC reverse polarity male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10752-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Low Loss Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 12 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-12 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-12 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7521 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE7752-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 1 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: F, Connector-In Gender: Male, Connector-Out Series: F, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 1 dB Fixed Attenuator 75 Ohm F-Type Male to 75 Ohm F-Type Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7752-1 is a 1 dB fixed attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7752-1 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.25:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with F-type connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated brass inner conductor. This F-type attenuator has a male gender on side 1 and a F-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7752-1 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 1 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7752-1 will ship the same business day as purchased from Pasternack’s production facility. This 1 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE33752-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to BNC Male Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to BNC male right angle cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC male right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE33752-12 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. SMA plug to BNC plug cable assembly PE33752-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33752-12 RF cable are available on our downloadable PDF datasheet.PE33752-12 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0752-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length: 39.370079 inches. 1.85mm Male to 1.85mm Male Cable 100 cm Length Using PE-P086 Coax., Radio frequency assembly 1.85mm male to 1.85mm male cable 100 cm length using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 100 cm length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C0752-100CM, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C0752-100CM is built with PE-P086 which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 100 cm length using PE-P086 coax. |
| 0 | ||
![]() Vyrian | XCVE1752-1LLINSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 4,022 | ||
| XCVE1752-1MLIVSVA2197 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2197 RoHS : Compliant | 3,994 | |||
| XCVE1752-1LSEVSVA1596 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1596 RoHS : Compliant | 3,613 | |||
| XCVE1752-1LSIVSVA1596 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1596 RoHS : Compliant | 3,117 | |||
| XCVE1752-1LSEVSVA2197 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2197 RoHS : Compliant | 2,740 | |||
| XCVE1752-1LSIVSVG1369 | AMD Xilinx | Microprocessor RoHS : Compliant | 2,735 | |||
| XCVE1752-1LSINSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 2,678 | |||
| XCVE1752-1LLIVSVA1596 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1596 RoHS : Compliant | 2,429 | |||
| XCVE1752-1LLIVSVG1369 | AMD Xilinx | Microprocessor RoHS : Compliant | 2,110 | |||
| XCVE1752-1LSEVSVG1369 | AMD Xilinx | Microprocessor RoHS : Compliant | 1,888 | |||
| XCVE1752-1MLINSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 1,884 | |||
| XCVE1752-1LSENSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 1,843 | |||
| XCVE1752-1LLIVSVA2197 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2197 RoHS : Compliant | 1,719 | |||
| XCVE1752-1LSIVSVA2197 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2197 RoHS : Compliant | 1,593 | |||
| XCVE1752-1MLIVSVA1596 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1596 RoHS : Compliant | 1,515 | |||
![]() Win Source Electronics | PT7A7521WE | Diodes Incorporated | IC SUPERVISOR 1 CHANNEL 8SOIC RoHS : Compliant |
| 12,000 | |
| PT7A7521WEX | Diodes Incorporated | IC SUPERVISOR 4.63V 8SOIC RoHS : Compliant |
| 11,040 | ||
| 7427521 | Wurth Elektronik | CMC 5A 2LN 52 OHM SMD RoHS : Compliant |
| 10,600 | ||
ISO7521CDW![]() | Texas Instruments | Low-Power 5 KV(rms) Dual Digital Isolators | DGTL ISO 4.243KV GEN PURP 16SOIC RoHS : Compliant |
| 6,887 | ||
ISO7521CDWR![]() | Texas Instruments | DGTL ISO 4.243KV GEN PURP 16SOIC RoHS : Compliant |
| 6,450 | ||
| P0752.104NL | Pulse Electronics Corporation | FIXED IND 100UH 1.3A 380 MOHM / SMT POWER INDUCTORS RoHS : Compliant |
| 1,600 | ||
| P0752.104NLT | Pulse Electronics Corporation | FIXED IND 100UH 1.2A 380 MOHM / Inductor Power Unshielded Wirewound 100uH 20% 100KHz 1.2A 0.38Ohm DCR T/R RoHS : Compliant |
| 1,474 | ||
| NCV75215DB001R2G | onsemi | NCV75215DB001R2G RoHS : Compliant |
| 390 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |