| Electronic Components Datasheet Search |
|
786-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() PUI | 12.87867 | 75,894 | ||||
| 12.87869 | 4,153 | |||||
| 12.87864 | 2,000 | |||||
| 12.87866 | 286 | |||||
| 12.88786 | 26 | |||||
![]() Richardson RFPD | 5499786-1 | TE Connectivity | Conn Ejector Header HDR 10 POS 2.54mm Solder RA Si RoHS : Compliant | 0 | ||
| SI5332HD12786-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| R577863007 | Radiall | RF Switch 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
AD7862ARSZ-2REEL![]() | Analog Devices Inc | 4-Channel Dual ADC SAR 250ksps 12-bit Parallel 28- RoHS : Compliant |
| 0 | ||
| DC1786A | Analog Devices Inc | LTC2871IUHF Bus Line Transceiver Demonstration Cir RoHS : Compliant |
| 0 | ||
| LTC7862IFE#PBF | Analog Devices Inc | Switching Surge Stopper Automotive 20-Pin TSSOP EP RoHS : Compliant |
| 0 | ||
AD7863ARSZ-3![]() | Analog Devices Inc | 4-Channel Dual ADC SAR 175ksps 14-bit Parallel 28- RoHS : Compliant |
| 0 | ||
AD7863ARZ-10REEL7![]() | Analog Devices Inc | 4-Channel Dual ADC SAR 175ksps 14-bit Parallel 28- RoHS : Compliant |
| 0 | ||
| 85178679 | HUBER+SUHNER | SENCITY Road IC MIMO Antenna RoHS : Compliant |
| 0 | ||
| SI5335A-B07860-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335A-B07860-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| LTC3786IMSE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Up 900kHz 16-Pin MSOP RoHS : Compliant |
| 0 | ||
| SI5338N-B07868-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5350C-B08786-GT | Skyworks Solutions Inc | Clock Generator 10MHz to 100MHz-IN 200MHz-OUT 10-P RoHS : Compliant | 0 | |||
AD7863ARSZ-2![]() | Analog Devices Inc | 4-Channel Dual ADC SAR 175ksps 14-bit Parallel 28- RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | C0603C330J5GAC7867 | INSTOCK | 73,006 | |||
C0603C472K5RAC7867![]() | KEMET Corporation | INSTOCK RoHS : Compliant | 23,684 | |||
C0603C560G5GAC7867![]() | KEMET Corporation | INSTOCK RoHS : Compliant | 15,381 | |||
C0603C106M9PAC7867![]() | KEMET Corporation | INSTOCK RoHS : Compliant | 8,000 | |||
| C0603C106M9PAC7867 | INSTOCK | 4,467 | ||||
| C0603C821J5GAC7867 | INSTOCK | 3,988 | ||||
| C0603C189D5GAC7867 | INSTOCK | 3,980 | ||||
| C0402C683K8PAC7867 | INSTOCK | 3,470 | ||||
| C06036339C5GAC7867 | KEMET Corporation | INSTOCK | 3,000 | |||
| C0603C472K1RAC7867 | INSTOCK | 2,890 | ||||
| 98786-1018 | INSTOCK | 1,655 | ||||
| RY78600 | INSTOCK | 457 | ||||
| 223-0786 | INSTOCK | 93 | ||||
| B57861S0104J40 | TDK Electronics | INSTOCK | 26 | |||
| NAS1786A06-18 | INSTOCK | 22 | ||||
![]() Braemac Americas-Symmetry | TMJG37867A5NL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Shielded EMI Finger, Tab up, short body, XFMR+3Wire (CT), (G-Y/G-Y), Industrial grade |
| 0 | |
AMSRW-786.5Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AMSR-786.5Z | Aimtec | RoHS : Compliant |
| 0 | ||
| 33-5786-27-10-05-PCO | Calian | TW5786 Smart GNSS UDR Antenna for High Accuracy Positioning |
| 0 | ||
![]() Chip-Germany GmbH | 1786-XT | 47 | ||||
| 744786210A | Wurth Elektronik | RoHS : Compliant | 28 | |||
| 7447786122 | Wurth Elektronik | RoHS : Compliant | 20 | |||
![]() Component Electronics, Inc | C0402C102K5RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 12,200 | |
C0402C331J5RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,950 | ||
C0402C240J5GAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,652 | ||
C0402C151K5RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,000 | ||
C0603C150K5GAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,800 | ||
C0603C472K5RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,641 | ||
C0603C683K3RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,600 | ||
C0603C104J3RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,500 | ||
| 786767-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,000 | ||
C0603C392J5RAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,960 | ||
C0603C681J3GAC7867![]() | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 236 | ||
TPS78633DCQR![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| 786588-1 | TE Connectivity | IN STOCK SHIP TODAY | 6 | |||
| 786903-2 | TE Connectivity | IN STOCK SHIP TODAY |
| 6 | ||
| 786555-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
![]() EBV Elektronik | MC56F83786VLK | NXP Semiconductors | Digital Signal Controller 100 MHz 256 KB 68 IOs CAN I2C SPI UART (Alt: MC56F83786VLK) RoHS : Compliant | 672 | ||
| TDA7786C | STMicroelectronics | ELITE AM FM Tuner IC 64 Pins LQFP (Alt: TDA7786C) RoHS : Compliant | 0 | |||
| TDA7786M | STMicroelectronics | ELITE AM FM Tuner IC 64 Pins LQFP (Alt: TDA7786M) RoHS : Compliant | 0 | |||
| IRF7862TRPBF | Infineon Technologies AG | Trans MOSFET NCH 30V 21A 8Pin SOIC TR (Alt: SP001577668) RoHS : Compliant | 0 | |||
| NCV78663DQ0G | onsemi | Dual LED Driver and Power Ballast for Automotive Front Lighting (Alt: NCV78663DQ0G) RoHS : Compliant | 0 | |||
| HCPL-7860-300E | Broadcom Limited | OptoCoupler 8Pin PDIP SMD Tube (Alt: HCPL-7860-300E) RoHS : Compliant | 0 | |||
| HCPL-786J-50SE | Broadcom Limited | Optically Isolated SigmaDelta Modulator 16Pin SOIC (Alt: HCPL-786J-50SE) RoHS : Compliant | 0 | |||
| HCPL-7860-500E | Broadcom Limited | OptoCoupler 8Pin PDIP SMD TR (Alt: HCPL-7860-500E) RoHS : Compliant | 0 | |||
PIC16F1786-I/ML![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin QFN EP Tube (Alt: PIC16F1786-I/ML) RoHS : Compliant | 0 | |||
| NCP786LSTADJT3G | onsemi | Linear Voltage Regulator 5 mA 450 V UltraLow Iq High PSRR Adjustable Vout from 127 V to 15 V ONSSPCLDO (Alt: NCP786LSTADJT3G) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 16KB Flash 33V5V 28Pin SSOP TR (Alt: PIC16F1786T-I/SS) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SO![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SOIC TR (Alt: PIC16F1786T-I/SO) RoHS : Compliant | 0 | |||
PIC16LF1786-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16LFxx PIC RISC 16KB Flash 33V 28Pin SSOP Tube (Alt: PIC16LF1786-I/SS) RoHS : Compliant | 0 | |||
PIC16LF1786T-I/SS![]() | Microchip Technology Inc | 14KB FLASH 1KB RAM 256B EEPROM 12BIT ADC 8BIT DAC PSM (Alt: PIC16LF1786T-I/SS) RoHS : Compliant | 0 | |||
| SLB9670XQ2.0FW7.86 | Infineon Technologies AG | OPTIGA TPM SLM 9670 (Alt: SP006104274) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3057-8(621) | Amphenol Industrial Operations |
| 140 | ||
| 97-3057-8(621) | Amphenol Industrial Operations |
| 140 | |||
| M3786/4-0870 | Grayhill Inc |
| 96 | |||
![]() Flip Electronics | NCV78663DQ0R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 100,500 | |
| LC78615E-01US-H | onsemi | Stock, Ship Today RoHS : Compliant | 8,932 | |||
| LC786963PW-23UFNLR-H | onsemi | Stock, Ship Today | 8,100 | |||
| MC56F83786MLK | NXP Semiconductors | Stock RoHS : Compliant | 3,989 | |||
| NCP786LSTADJT3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,855 | ||
| LC786800E-6C08-H | onsemi | Stock, Ship Today | 2,250 | |||
LPC1786FBD208![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,620 | |||
LPC1786FBD208,551![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,620 | |||
| HCPL-7860-300E | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 1,280 | ||
| MC56F83786VLK | NXP Semiconductors | Stock RoHS : Compliant | 471 | |||
| MC56F84786VLK | NXP Semiconductors | Stock RoHS : Compliant | 110 | |||
| LC786821E-6E04-3H | onsemi | Stock, Ship Today RoHS : Compliant |
| 22 | ||
![]() Neutron USA | 09032786804 | HARTING Technology Group | DIN 41612 Connectors DIN-SIGNAL M78+2FS-2,9C1-2 RoHS : Compliant |
| 47 | |
| M3786/13-0002 | Grayhill Inc | Switch Rotary SP3T 3 Flatted Shaft Solder Lug 0.25A 115VAC 28VDC |
| 27 | ||
| M3786/4-5277 | Grayhill Inc | Switch Rotary 4P3T 3 Flatted Shaft Solder Lug 1A 115VAC 115VDC |
| 9 | ||
| M3786/4-5096 | Grayhill Inc | Rotary Switches 44HS30-05-1-09N |
| 7 | ||
| 1878660000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WTA 4N WDK 2.5 RoHS : Compliant |
| 3 | ||
| 1786790000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 64D TSBO 1M32G RoHS : Compliant |
| 2 | ||
| 6191786 | RS Pro | EPDM Foam Tape, 32'10"x0.8"(10mx20mm), 0.2"(5mm) Thick, Black |
| 2 | ||
| M3786/4-6031 | Grayhill Inc | Rotary Switches 44HS60-02-1-02N |
| 1 | ||
| AXG97862 | Axiom Manufacturing | AXIOM 70FT CAT6 BENDNFLEX CAB (YELLOW) |
| 0 | ||
| 84137860 | Crydom Inc | Relay; SSR; Control; Cur-Rtg 15A; Ctrl-V 3-32DC; Vol-Rtg 1-100DC; UL/cUL; CE; TUV |
| 0 | ||
| M3786/36-0075 | Grayhill Inc | Switch Rotary SP24T 24 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant |
| 0 | ||
| M3786/4-0884 | Grayhill Inc | Rotary Switches 44M45-03-1-05N RoHS : Compliant |
| 0 | ||
| M3786/4-5003L | Grayhill Inc | Switch Rotary Closed Construction 2 Amperes Low Level Positive Shaft Grounding Flux Seal Style |
| 0 | ||
| AXG97861 | Axiom Manufacturing | AXIOM 60FT CAT6 BENDNFLEX CAB (YELLOW) |
| 0 | ||
| M3786/39-NCA | Grayhill Inc | Rotary Switches 71MB36-01-1-04N |
| 0 | ||
![]() Pasternack Enterprises US | PE3C7864 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low PIM Cable Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA male right angle low PIM cable using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle low PIM cable using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low PIM SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7864, can also be known as a low PIM SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7864 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7864 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low PIM SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low PIM cable using 1/4 inch superflexible coax. | 72 | ||
| PE3W17861-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female to NEX10 Female Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female to NEX10 female low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female to NEX10 female low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17861-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17861-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17861-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 22 | ||
| PE3C7869-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low PIM right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C7869-12, can also be known as a low PIM right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7869-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7869-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low PIM SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 8 | ||
| PE3C7869-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to SMA Female Bulkhead Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low PIM right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C7869-48, can also be known as a low PIM right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7869-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7869-48 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low PIM SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead low PIM cable 48 inch length using 1/4 inch superflexible coax. |
| 8 | ||
| PE91786 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Radius Right Angle, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. N Male to N Female Radius Right Angle Adapter, Passivated, VSWR 1.2 Max. DC-18GHz. The type N radius right angle adapter PE91786 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.2:1. This RF adapter has a plug to jack gender configuration, which provides easier connections in tighter spaces. Our type N to type N adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 18 GHz. This in-series RF adapter has a dielectric withstanding voltage of 2,500 Vrms. This type N plug to type N jack adapter is one of the many RF components that ship the same business day as they are ordered. The PE91786 plug type N to jack type N adapter has a radius right angle body. This Pasternack radius right angle type N coax adapter is a 90 degree swept elbow adapter. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This RF adapter has a 1.45-inch length, 0.75-inch width, and 0.11 lbs weight. The PE91786 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our type N plug to type N jack radius right angle radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of radius right angle type N to type N radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz RF adapter that meets your requirements. |
| 2 | ||
| PE3C10786-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to Mini SMP Female Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10786-24 1.85mm male to mini SMP female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10786-24 can also be known as a 1.85mm plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10786-24 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10786-24 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10786-24 can also be used in the other direction and will be a mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3C3178-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG316-DS Coax., Radio frequency assembly N male to N male right angle cable using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C3178-60, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C3178-60 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3178-60 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable using RG316-DS coax. |
| 0 | ||
| PE3C3378-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 6 inches. N Male to BNC Male Cable 6 Inch Length Using RG174 Coax., Radio frequency assembly N male to BNC male cable 6 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 6 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3C3378-6, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3C3378-6 is built with RG174 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3378-6 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 6 inch length using RG174 coax. |
| 0 | ||
| PE3W15786/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. QMA Female Bulkhead to Reverse Polarity SMA Male Right Angle Cable Using RG174 Coax with HeatShrink. PE3W15786/HS is a QMA female bulkhead to reverse polarity SMA male right angle cable using RG174 coax. This Pasternack QMA female bulkhead to reverse polarity SMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. QMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female QMA bulkhead to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15786/HS QMA female bulkhead to SMA reverse polarity male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W22786 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to SMA Male Right Angle Cable Using RG142 Coax. PE3W22786 is a BMA plug bulkhead to SMA male right angle cable using RG142 coax. This Pasternack BMA plug bulkhead to SMA male right angle cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. BMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug BMA bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22786 BMA plug bulkhead to SMA male right angle cable assembly is constructed with RG142 coax. | 0 | |||
| PE3C7860-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Male Right Angle to 2.2-5 Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and right angle 2.2-5 cable connection on the other. Our low PIM right angle 2.2-5 to right angle 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7860-100CM, can also be known as a low PIM right angle 2.2-5 plug to right angle 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7860-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to right angle 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 right angle plug to 2.2-5 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7863-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. SMA Male to SMA Male Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA male low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7863-150CM, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7863-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7863/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Low PIM Cable 60 Inch Length Using 1/4 inch Superflexible Coax with HeatShrink., Radio frequency assembly SMA male to SMA male low PIM cable 60 inch length using 1/4 inch superflexible coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male low PIM cable 60 inch length using 1/4 inch superflexible coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C7863/HS-60 can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7863/HS-60 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 60 inch length using 1/4 inch superflexible coax with heatshrink. |
| 0 | ||
| PE3C7862-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-100CM, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-100CM can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7862-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-12, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-12 can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-8778601VA![]() | Teledyne HiRel | A/D CONVERTER, 6-BIT FLASH RoHS : Not Compliant | 0 | ||
![]() Vyrian | LPC1786FBD208,551![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 12,116 | ||
| LTC3786EMSE-PBF | Analog Devices Inc | 12,077 | ||||
| LTC3786EMSE#PBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 11,495 | |||
| LTC3786EMSE#TRPBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PDSO16 RoHS : Compliant | 11,286 | |||
| LT1786FCS | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant | 10,986 | |||
| LTC3786EMSE-TRPBF | Analog Devices Inc | 10,300 | ||||
| LTC3786EUD#PBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PQCC16 RoHS : Compliant | 10,158 | |||
| LTC3786EUD#TRPBF | Analog Devices Inc | Switching Controller, Current-mode, 900kHz Switching Freq-Max, CMOS, PQCC16 RoHS : Compliant | 10,119 | |||
| LT1786FCS#PBF | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Compliant | 10,111 | |||
| LT1786FCS-PBF | Analog Devices Inc | 8,195 | ||||
| LT1786FCS-TRPBF | Analog Devices Inc | 8,052 | ||||
| LT1786FCS#TRPBF | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Compliant | 7,929 | |||
| LTC3786EUD-PBF | Analog Devices Inc | 6,719 | ||||
| LT1786FCS#TR | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant | 5,715 | |||
LPC1786FBD208![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 120MHz, CMOS, PQFP208 RoHS : Compliant | 375 | |||
![]() Waytek, Inc. | 151-00786 | HellermannTyton | HellermannTyton 151-00786 round fir tree push mount is a wire-management fastener designed to anchor bundles to a panel with a push-in fir tree stem. Its round mount format supports quick installation, organized harness routing, and stable bundle retention in vehicle and equipment applications. RoHS : Compliant |
| 4,791 | |
| 13964786 | Aptiv PLC | The Aptiv 13964786-L OCS 1.5 Series male terminal is a loose-piece contact for 18-16 Ga. wire. Made from high-performance copper alloy, it features a 1.5 blade size, contact-tongue overstress and nose protection, and compatibility with major OEM cavity standards. Rated up to 21A and -40F to 257F, it supports reliable automotive connector termination. |
| 3,906 | ||
| 13964786 | Aptiv PLC | Aptiv OCS 1.5 Series Male Terminal 16-18 Ga, Reel (3,400 pcs = 1 Reel) |
| 3,400 | ||
| 12020786 | Aptiv PLC | Weather Pack Black Male Shroud Connector 6 Way Connector #12020786 RoHS : Compliant |
| 2,111 | ||
| SP2778/6228 CT | Sargent Quality Tools | Battery Terminal Diamond Crimp Tool 1 thru 8 AWG |
| 6 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |