| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Powell Electronics | AT60-204-08141
| Amphenol Sine Systems | Size 8 Pin Contact Machined 810AWG | 4,000 : $2.6707
5,000 : $2.3906
|
| 8,580
 |
LMJ2018814100DT1
| Amphenol Corporation | Connector | | 5,875
|
3-178141-3
| TE Connectivity | Headers & Wire Housings
RoHS : Compliant | 69 : $4.99
115 : $4.91
207 : $4.81
368 : $4.73
1,702 : $4.31
|
| 1,274
|
AT60-204-08141-16
| Amphenol Sine Systems | Size 8 Pin Contact Machined 6AWG | 1 : $1.4139
5 : $1.4
10 : $1.39
25 : $1.38
50 : $1.37
|
| 1,000
|
8-1419126-4
| TE Connectivity | Connectors | | 594
|
2304814-1
| TE Connectivity | Connectors | 3 : $28.69
13 : $27.55
51 : $26.44
140 : $25.39
|
| 198
|
8-1419111-0
| TE Connectivity | Relays
RoHS : Compliant | 10 : $10.21
40 : $9.33
70 : $9.16
150 : $8.99
250 : $8.81
|
| 166
|
HW-12-13-G-D-958-141
| Samtec Inc | High Temperature Flexible Board Stacking
RoHS : Compliant | 1 : $4.89
25 : $4.61
50 : $4.32
100 : $3.71
500 : $3.24
|
| 141
|
8-1419132-8
| TE Connectivity | TE COMPONENT (REF 8-1419132-8) | 130 : $12.52
250 : $11.04
500 : $9.76
1,000 : $9.39
|
| 46
|
8-1419111-9
| TE Connectivity | Relays
RoHS : Compliant | 130 : $11.89
250 : $10.49
500 : $9.27
1,000 : $8.92
|
| 13
|
8-1419111-1
| TE Connectivity | Relays
RoHS : Compliant | 10 : $12.93
30 : $11.29
60 : $11.01
150 : $10.75
250 : $10.49
|
| 3
|
4-458141-9
| TE Connectivity | CRIMPER, WIRE SP. (.080 F ) | 3 : $162.46
5 : $152.31
10 : $148.25
|
| 2
|
3-458141-3
| TE Connectivity | Tools | | 1
|
22628-14-19P-791[V001]
| TE Connectivity | DEUTSCH CONNECTOR 22628-14-19P-791[V001] | | 1
|
004181414
| Altech Corporation | Fuse,NH00C,aM,M,100A,500VAC | | 1
|
Rutronik | BFC233868141
| Vishay Intertechnologies | FF 4,7nF 300Vac 20% Y2 P10 MKP
RoHS : Compliant | 1,100 : $0.1643
2,200 : $0.1542
3,300 : $0.1516
4,400 : $0.1491
6,600 : $0.1403
|
| 1,100
|
P/N8141
| Keystone Electronics Corp | STEEL HALF CLAMPS
RoHS : Compliant | 100 : $0.1631
200 : $0.155
300 : $0.1536
500 : $0.1523
800 : $0.1455
|
| 1,000
|
Avnet Silica | EMI8141MUTAG
| onsemi | Common Mode Filter with ESD Protection 1Pair CMF for HDMI in DFN ONSSPCPRTCNIW2U6D (Alt: EMI8141MUTAG)
RoHS : Compliant | | 0
 |
NCP81418GEVK
| onsemi | NCP81428 AND NCP81418 EVALUATION BOARD (Alt: NCP81418GEVK)
RoHS : Not Compliant | | 0
|
Braemac Americas-Symmetry | ACMP-7038-141-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
DB Roberts | MS35338-141
| Military Specifications | | 1 : $0.2714
100 : $0.1907
500 : $0.1501
1,000 : $0.1238
5,000 : $0.1176
|
| 6,391
|
MS35338-141.D
| Military Specifications | MED LOCKWASHER DFARS COMPLIANT REQUIRED | 1 : $0.2714
100 : $0.1907
500 : $0.1501
952 : $0.1501
|
| 952
|
4814-14-01
| ITW Shakeproof | WCL DSTP-0250-14-01-STL-ZN1/96 SHAKEPROOF EQUIV | | 38
|
8141
| Heyco | 8141-000 (#10 FORK, K-8586) | | 0
|
301318141556
| Essentra Components | | | 0
|
304308141152
| Essentra Components | | | 0
|
301318141152
| Essentra Components | | | 0
|
304308141556
| Essentra Components | | | 0
|
301308141152
| Essentra Components | | | 0
|
TN8-14-1024-1
| Essentra Components | StandoffThrd Fem/FemWht Spc Standoff Thrd Fem/Fem White | | 0
|
38-108-14-16
| Southco | Create high-strength permanent bonding of diverse materials such as metal wood and masonry in through-hole and blind-hole applications with affordable Southco Drive Rivets. Easy installation and removal make Drive Rivets an easy choice for field wo | | 0
|
304318141556
| Essentra Components | | | 0
|
R4-81-411-30
| Southco | R4-81-411-30 | | 0
|
TN8-14-1024-2
| Essentra Components | StandoffThrd Fem/MLWht7/8 inSpc Standoff Thrd Fem/ML White | | 0
|
TN8-14-1024-3
| Essentra Components | StandoffThrd ML/MLWht7/8 inSpc Standoff Thrd ML/ML White | | 0
|
EBV Elektronik | EMI8141MUTAG
| onsemi | Common Mode Filter with ESD Protection 1Pair CMF for HDMI in DFN ONSSPCPRTCNIW2U6D (Alt: EMI8141MUTAG)
RoHS : Compliant | | 0
|
SGM8141YN5G/TR
| SG Micro Corp | (Alt: SGM8141YN5G/TR)
RoHS : Compliant | | 0
|
ECCO | 10-825814-16S
| Amphenol Industrial Operations | | | 59
|
10-825814-12S
| Amphenol Industrial Operations | | | 54
|
10-825814-11S
| Amphenol Industrial Operations | | | 14
|
10-825814-18P
| Amphenol Industrial Operations | | | 6
|
Maritex | 0462-203-08141
| TE Connectivity | Multi-Purpose Contacts; 0462-203-08141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Cable
RoHS : Compliant | 500 : $3.84
100 : $4.413
50 : $4.885
10 : $6.14
1 : $7.9952
|
| 1,500
|
DK100814_1R2530XP_REVC_P20M
| PCB-TECH | MCPCB, thermal conductivity 2W/(m*K), thickness: 2mm, number of layers - 1, black soldermask, legend color: gold, size: rectangle 25x30mm, pad cover: gold; for XP/XT LEDs, /20 | 480 : $0.4
120 : $0.45
20 : $0.476
1 : $0.5
|
| 689
|
Master Electronics | 8141
| HH Smith | Phenolic Spacer - 1/4 OD - #6 ID - 1/8 Length.
RoHS : Compliant | 800 : $0.263
400 : $0.277
200 : $0.292
100 : $0.307
|
| 200
|
8-1419132-8
| TE Connectivity | Power Relay 6A 4PDT(28x22.5x29)mm Plug-In Miniature Relay
RoHS : Compliant | 250 : $10.6
188 : $11.05
125 : $11.32
63 : $11.72
50 : $12.07
25 : $13.72
10 : $14.15
5 : $16.54
|
| 69
|
08-1416-100
| Mode Electronics | Multi-Conductor Cable 16Conductors 28AWG 30.48m 300V Spool
RoHS : Compliant | 250 : $23.29
100 : $23.68
50 : $23.74
25 : $24.39
10 : $25.07
5 : $25.13
1 : $26.67
|
| 21
|
8-1419111-1
| TE Connectivity | PT570048
RoHS : Compliant | 1,000 : $6.41
500 : $6.7
250 : $7.68
100 : $7.89
50 : $8.01
30 : $8.2
10 : $8.33
1 : $9.163
|
| 4
|
FW-02-03-F-D-218-141
| Samtec Inc |
RoHS : Compliant | 7,500 : $0.4236
5,000 : $0.4247
2,500 : $0.5571
1,000 : $0.6269
500 : $0.806
250 : $0.8438
25 : $1.0385
|
| 0
|
FW-02-03-FM-D-158-141
| Samtec Inc |
RoHS : Compliant | 7,500 : $0.4236
5,000 : $0.4247
2,500 : $0.5571
1,000 : $0.6269
500 : $0.806
250 : $0.8438
25 : $1.0385
|
| 0
|
FW-02-03-H-D-148-141
| Samtec Inc |
RoHS : Compliant | 7,500 : $0.883
5,000 : $0.907
2,500 : $1.151
1,000 : $1.3
500 : $1.71
250 : $1.761
100 : $1.844
25 : $2.269
|
| 0
|
FW-02-03-G-D-208-141
| Samtec Inc |
RoHS : Compliant | 10,000 : $0.532
7,500 : $0.533
5,000 : $0.548
2,500 : $0.685
1,000 : $0.771
500 : $1.045
250 : $1.094
25 : $1.346
|
| 0
|
HW-12-13-G-D-958-141
| Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole
RoHS : Compliant | 5,000 : $1.63
2,500 : $2.13
1,000 : $2.76
500 : $3.28
250 : $3.81
100 : $4.03
50 : $4.2
5 : $4.76
|
| 0
|
RV8141-16-S01
| TE Connectivity | RV Common Mode Choke Nano Four line 16A 11.2m MOQ Reduction
RoHS : Compliant | 40 : $32.0
30 : $32.65
20 : $41.25
10 : $67.03
|
| 0
|
3-458141-3
| TE Connectivity | CRIMPER WIRE SPECIAL (.130)
RoHS : Not Compliant | 100 : $126.79
50 : $128.48
20 : $132.0
10 : $133.83
5 : $139.44
1 : $188.57
|
| 0
|
2053814-1
| TE Connectivity | CONNECTOR ASSY NOVA 10 CLOSE/ MOQ Reduction
RoHS : Compliant | 1,000 : $4.41
750 : $4.5
500 : $6.4
250 : $12.09
|
| 0
|
053-71814-125
| Thomas & Betts | Rigid and Intermediate Metal Conduit Fittings for Cable Protection Systems
RoHS : Compliant | 100 : $7.59
75 : $7.74
50 : $8.29
25 : $11.06
|
| 0
|
053-71814-126
| Thomas & Betts | Grounding Cone - 1-1/2 Inch - Steel - Plated.
RoHS : Compliant | 100 : $13.48
75 : $13.76
50 : $14.74
25 : $19.65
|
| 0
|
2423814-1
| TE Connectivity | Round Sil Sponge Core TCS Dia3.2 L0.25m
RoHS : Compliant | 5,000 : $1.79
2,500 : $1.84
1,000 : $1.89
500 : $2.0
250 : $2.06
100 : $2.16
50 : $2.9
10 : $4.08
|
| 0
|
Pasternack Enterprises US | PE3C8141
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to Trimmed Lead Test Probe Cable Using PE-SR405FL Coax., Radio frequency assembly SMA female 2 hole flange to trimmed lead test probe cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to trimmed lead test probe cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 2 hole flange cable connection on one end and trimmed lead cable connection on the other. Our test probe SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C8141, can also be known as a test probe SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C8141 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8141 can also be used in the other direction and will be trimmed lead sexless to SMA female 2 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 2 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to trimmed lead test probe cable using PE-SR405FL coax. | | 152
|
PE3814-18
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 18 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3814-18, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3814-18 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 18 inch length using 75 Ohm RG59 coax. | 1 : $79.99
25 : $75.99
50 : $71.99
100 : $68.79
|
| 41
|
PE3814-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male to SMA male cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3814-12, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3814-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using 75 Ohm RG59 coax. | 1 : $80.99
25 : $76.94
50 : $72.89
100 : $69.65
|
| 41
|
PE3C8141-9
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 9 inches. SMA Female 2 Hole Flange to Trimmed Lead Test Probe Cable 9 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 2 hole flange to trimmed lead test probe cable 9 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to trimmed lead test probe cable 9 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 2 hole flange cable connection on one end and trimmed lead cable connection on the other. Our test probe SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C8141-9, can also be known as a test probe SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C8141-9 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8141-9 can also be used in the other direction and will be trimmed lead sexless to SMA female 2 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 2 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to trimmed lead test probe cable 9 inch length using PE-SR405FL coax. | 1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49
|
| 38
|
PE3C8141-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 2 Hole Flange to Trimmed Lead Test Probe Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 2 hole flange to trimmed lead test probe cable 12 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to trimmed lead test probe cable 12 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 2 hole flange cable connection on one end and trimmed lead cable connection on the other. Our test probe SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C8141-12, can also be known as a test probe SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C8141-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8141-12 can also be used in the other direction and will be trimmed lead sexless to SMA female 2 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 2 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to trimmed lead test probe cable 12 inch length using PE-SR405FL coax. | 1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09
|
| 38
|
PE3C8141-3
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female 2 Hole Flange to Trimmed Lead Test Probe Cable 3 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 2 hole flange to trimmed lead test probe cable 3 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to trimmed lead test probe cable 3 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 2 hole flange cable connection on one end and trimmed lead cable connection on the other. Our test probe SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C8141-3, can also be known as a test probe SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C8141-3 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8141-3 can also be used in the other direction and will be trimmed lead sexless to SMA female 2 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 2 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to trimmed lead test probe cable 3 inch length using PE-SR405FL coax. | 1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09
|
| 38
|
PE3C8141-6
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female 2 Hole Flange to Trimmed Lead Test Probe Cable 6 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 2 hole flange to trimmed lead test probe cable 6 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to trimmed lead test probe cable 6 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 2 hole flange cable connection on one end and trimmed lead cable connection on the other. Our test probe SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C8141-6, can also be known as a test probe SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C8141-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8141-6 can also be used in the other direction and will be trimmed lead sexless to SMA female 2 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 2 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to trimmed lead test probe cable 6 inch length using PE-SR405FL coax. | 1 : $50.99
25 : $48.44
50 : $45.89
100 : $43.85
|
| 38
|
PE3C9814-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly BNC male to BNC male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C9814-12 can also be known as a low loss BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C9814-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9814-12 can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components. | 1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23
|
| 34
|
PE3W08141
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. BNC Female to SMA Male Cable Using RG303 Coax. PE3W08141 is a BNC female to SMA male cable using RG303 coax. This Pasternack BNC female to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08141 BNC female to SMA male cable assembly is constructed with RG303 coax. | | 0
|
PE3C7814-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Female Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly 2.4mm male to 2.4mm female cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable 18 inch length using RG405 coax, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and female on end 2. PE3C7814-18 can also be known as a 2.4mm plug to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm jack cable assembly PE3C7814-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7814-18 can also be used in the other direction and will be 2.4mm female to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm female cable 18 inch length using RG405 coax. | 1 : $525.0
25 : $498.75
50 : $472.5
100 : $451.5
|
| 0
|
PE3W18141
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Female Cable Using LMR-100A-UF Coax. PE3W18141 is a MMCX jack to SMA female cable using LMR-100A-UF coax. This Pasternack MMCX jack to SMA female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18141 MMCX jack to SMA female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W01814-180
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with Solderless Times Microwave Components., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with solderless Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with solderless Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W01814-180 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W01814-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with solderless Times Microwave components. | 1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43
|
| 0
|
PE3C7814-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Female Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly 2.4mm male to 2.4mm female cable 12 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable 12 inch length using RG405 coax, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and female on end 2. PE3C7814-12 can also be known as a 2.4mm plug to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm jack cable assembly PE3C7814-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7814-12 can also be used in the other direction and will be 2.4mm female to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm female cable 12 inch length using RG405 coax. | 1 : $515.0
25 : $489.25
50 : $463.5
100 : $442.9
|
| 0
|
PE3W01814-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-600-DB Coax with Solderless Times Microwave Components., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-600-DB coax with solderless Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-600-DB coax with solderless Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W01814-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W01814-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-600-DB coax with solderless Times Microwave components. | 1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67
|
| 0
|
Sager | 8141
| Keystone Electronics Corp | Cable Mounting & Accessories .187D STEEL CLAMP
RoHS : Compliant | 2,500 : $0.1076
5,000 : $0.0998
|
| 0
|
8141R20KL.25CT
| TT electronics / BI Technologies | Precision Potentiometers | | 0
|
8141R50KL.25SS
| TT electronics / BI Technologies | Precision Potentiometers | | 0
|
P7-814121
| OTTO Engineering Inc | SUBMINIATURE MOMENTARY ACTION PUSHBUTTON SWITCH | | 0
|
9713814141
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
9813814119
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
9813918141
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
9857608141
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
9858418141
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
M8805/118-14141
| OTTO Engineering Inc | Subminiature Basic Switch, Double Break | 1 : $28.48
15 : $25.42
64 : $22.2
137 : $20.24
343 : $19.69
735 : $17.66
|
| 0
|
8141R100KL.25
| TT electronics / BI Technologies | Precision Potentiometers | | 0
|
8141R10KL.25
| TT electronics / BI Technologies | Precision Potentiometers | | 0
|
8141R5KL.25
| TT electronics / BI Technologies | Precision Potentiometers | | 0
|
70D3-18-14-1-ZB
| TE Connectivity | Circular MIL Spec Backshells 70D3-18-14-1-ZB
RoHS : Compliant | | 0
|
9713814123
| Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | | 0
|
TE Connectivity | 928814-1
| TE Connectivity | 250 FASTON TAB TPBR PCB Terminal Type: Tab Mating Tab Width: .25 in Mating Tab Width: 6.35 mm PCB Hole Diameter: 1.4 mm PCB Hole Diameter: .055 in Tab .25" 6.35 mm 1.4 mm | PCB Terminal | Part Number: 928814-1 | Internal Number: 928814-1 | .25" | TE Connectivity
RoHS : Compliant | 1,000 : $0.19
100 : $0.25
10 : $0.3
1 : $0.4
|
| 17,344
|
794814-1
| TE Connectivity | 02P UMNL PLUG HSG,HI TEMP Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Board Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 794814-1 | Internal Number: 794814-1 | TE Connectivity
RoHS : Compliant | 1,000 : $0.25
100 : $0.34
10 : $0.41
1 : $0.53
|
| 1,928
|
1-178141-2
| TE Connectivity | DYNAMIC CONN 6P V HDR ASSY PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178141-2 | Internal Number: 1-178141-2 | TE Connectivity
RoHS : Compliant | 1,000 : $5.92
500 : $6.1
250 : $6.28
100 : $6.46
50 : $6.64
25 : $6.82
10 : $7.0
1 : $7.18
|
| 1,610
|
8-1415537-0
| TE Connectivity | SR6B6K24 Relay & Contactor Type: Force-Guided Relay Coil Magnetic System: Monostable Contact Arrangement: 4A (NO) + 2B (NC) Contact Current Rating: 8 A Coil Voltage Rating: 24 VDC Force-Guided Relay Monostable 4A (NO) + 2B (NC) 8 A | Force Guided Relay With 6 Contact | Part Number: 8-1415537-0 | Internal Number: 8-1415537-0 | Alias Number: SR6B6K24 | TE Connectivity
RoHS : Compliant | 100 : $80.79
50 : $84.64
25 : $88.48
10 : $92.34
1 : $96.18
|
| 1,486
|
8-1415536-6
| TE Connectivity | 0410 83 046 001WG Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form X SPST-NO-DM Contact Current Rating: 16 A General Purpose Power Relay DC Monostable 1 Form X SPST-NO-DM | Electromechanical Relay | Part Number: 8-1415536-6 | Internal Number: 8-1415536-6 | Alias Number: 41083046001WG | TE Connectivity
RoHS : Compliant | 1,000 : $15.0
100 : $19.74
25 : $20.69
10 : $23.45
1 : $25.86
|
| 655
|
3-178141-3
| TE Connectivity | DYNAMIC D3100 HDR V 6P ASSY PdNI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 3-178141-3 | Internal Number: 3-178141-3 | TE Connectivity
RoHS : Compliant | 1,000 : $8.99
500 : $9.26
250 : $9.53
100 : $9.81
50 : $10.08
25 : $10.35
10 : $10.62
1 : $10.9
|
| 579
|
RV8141-16-S01
| TE Connectivity | RV8141-16-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 16 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 16 A PCB Terminal PD2 | Part Number: RV8141-16-S01 | Internal Number: 823173-SF | RV8141-16-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 16 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 16 A PCB Terminal PD2 | Part# RV8141-16-S01
RoHS : Compliant | 25 : $99.5
10 : $107.15
1 : $114.8
|
| 40
|
RV8141-32-S11
| TE Connectivity | RV8141-32-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 32 A PCB Terminal PD2 | Part Number: RV8141-32-S11 | Internal Number: 823215-SF | RV8141-32-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 32 A PCB Terminal PD2 | Part# RV8141-32-S11
RoHS : Compliant | 25 : $79.72
10 : $85.85
1 : $91.98
|
| 40
|
RV8141-32-S13
| TE Connectivity | RV8141-32-S13 Operating Voltage (Max): 530 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 32 A PCB Terminal PD2 | Part Number: RV8141-32-S13 | Internal Number: 823235-SF | RV8141-32-S13 Operating Voltage (Max): 530 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 32 A PCB Terminal PD2 | Part# RV8141-32-S13
RoHS : Compliant | 25 : $104.48
10 : $112.52
1 : $120.55
|
| 40
|
RV8141-25-S01
| TE Connectivity | RV8141-25-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part Number: RV8141-25-S01 | Internal Number: 823174-SF | RV8141-25-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part# RV8141-25-S01
RoHS : Compliant | 25 : $97.59
10 : $105.1
1 : $112.61
|
| 40
|
RV8141-50-S11
| TE Connectivity | RV8141-50-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 50 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 50 A PCB Terminal PD2 | Part Number: RV8141-50-S11 | Internal Number: 823217-SF | RV8141-50-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 50 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 50 A PCB Terminal PD2 | Part# RV8141-50-S11
RoHS : Compliant | 25 : $84.26
10 : $90.74
1 : $97.23
|
| 39
|
RV8141-40-S01
| TE Connectivity | RV8141-40-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 40 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 40 A PCB Terminal PD2 | Part Number: RV8141-40-S01 | Internal Number: 823176-SF | RV8141-40-S01 Operating Voltage (Max): 530 VDC Current Rating (Max): 40 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 40 A PCB Terminal PD2 | Part# RV8141-40-S01
RoHS : Compliant | 25 : $103.34
10 : $111.29
1 : $119.24
|
| 33
|
RV8141-25-S13
| TE Connectivity | RV8141-25-S13 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part Number: RV8141-25-S13 | Internal Number: 823234-SF | RV8141-25-S13 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part# RV8141-25-S13
RoHS : Compliant | 25 : $101.48
10 : $109.29
1 : $117.1
|
| 28
|
RV8141-40-S11
| TE Connectivity | RV8141-40-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 40 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 40 A PCB Terminal PD2 | Part Number: RV8141-40-S11 | Internal Number: 823216-SF | RV8141-40-S11 Operating Voltage (Max): 530 VDC Current Rating (Max): 40 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 40 A PCB Terminal PD2 | Part# RV8141-40-S11
RoHS : Compliant | 25 : $81.94
10 : $88.24
1 : $94.55
|
| 24
|
RV8141-50-S03
| TE Connectivity | RV8141-50-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 50 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 50 A PCB Terminal PD2 | Part Number: RV8141-50-S03 | Internal Number: 823197-SF | RV8141-50-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 50 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 50 A PCB Terminal PD2 | Part# RV8141-50-S03
RoHS : Compliant | 25 : $138.97
10 : $149.66
1 : $160.35
|
| 16
|
Vyrian | 279-815/281-410
| WAGO Innovative Connections | Modular Terminal Block, 0.5A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant | | 13,233
|
8-1419111-0
| TE Connectivity | Power/Signal Relay, 4 Form C, 4PDT, Momentary, 0.063A (Coil), 12VDC (Coil), 750mW (Coil), 6A (Contact), DC Input, AC/DC Output, Panel Mount
RoHS : Compliant | | 12,492
|
AD8141ACPZ-R2
 | Analog Devices Inc | Line Driver, 3 Func, 3 Driver, CMOS
RoHS : Compliant | | 11,216
|
1858141
| Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant | | 9,115
|
LA78141-E
| onsemi | | | 8,941
|
2814126
| Phoenix Contact | Sensors/Detector Modules
RoHS : Compliant | | 8,519
|
8-1415043-1
| TE Connectivity | Relays/Accessories
RoHS : Compliant | | 6,864
|
TMS664814-10DGE
| Texas Instruments | Synchronous DRAM, 8MX8, 7.5ns, CMOS, PDSO54 | | 6,114
|
DAC81416RHAT
 | Texas Instruments | D/A Converter, 1 Func, Parallel, Word Input Loading, 12us Settling Time, PQCC40
RoHS : Compliant | | 5,955
|
P8-141312C
| OTTO Engineering Inc | Pushbutton Switch
RoHS : Compliant | | 882
|
279-915/281-410
| WAGO Innovative Connections | Modular Terminal Block
RoHS : Compliant | | 851
|
281-915/281-410
| WAGO Innovative Connections | Modular Terminal Block
RoHS : Compliant | | 850
|
280-562/281-411
| WAGO Innovative Connections | Modular Terminal Block
RoHS : Compliant | | 782
|
RJE09-288-1410
| Amphenol Corporation | Telecom and Datacom Connector
RoHS : Compliant | | 504
|
RJE72-488-1411
| Amphenol Corporation | Telecom and Datacom Connector
RoHS : Compliant | | 372
|
Waytek, Inc. | AT62-203-08141
| Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. | 1 : $4.62
10 : $4.47
50 : $4.35
100 : $4.18
200 : $4.07
500 : $3.96
|
| 2,162
|
AT60-204-08141
| Amphenol Sine Systems | Amphenol Sine Systems AT60-204-08141 ATHD male pin terminal is a size 8 machined pin contact for 10-8 Ga. wire. It supports ATHD Series heavy-duty power connector assemblies and pairs with matching sealed ATHD housings. | 1 : $4.3086
10 : $3.9287
50 : $3.6286
100 : $3.1787
200 : $3.0086
500 : $2.8786
|
| 1,076
|
Win Source Electronics | MADL-011008-14120T
| MACOM | Low Insertion Loss and Noise Figure | RF DIODE PIN 6DFN
RoHS : Compliant | 142 : $2.1147
106 : $2.3587
82 : $2.44
60 : $2.5214
39 : $2.6027
16 : $3.1721
|
| 28,846
|
EMI8141MUTAG
| onsemi | CMC 100MA 2LN SMD ESD
RoHS : Compliant | 440 : $0.6846
330 : $0.7636
255 : $0.7899
185 : $0.8162
120 : $0.8425
50 : $1.0268
|
| 2,317
|
DAC81416RHAT
| Texas Instruments | IC DAC 16BIT 40VQFN / 16 Bit Digital to Analog Converter 1 40-VQFN (6x6)
RoHS : Compliant | 6 : $50.8271
5 : $56.6918
4 : $58.6467
3 : $60.6016
2 : $62.5564
1 : $76.2407
|
| 950
|
DAC81416RHAR
| Texas Instruments | DIGITAL TO ANALOG CONVERTER
RoHS : Compliant | 6 : $50.8271
5 : $56.6918
4 : $58.6467
3 : $60.6016
2 : $62.5564
1 : $76.2407
|
| 920
|
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand