8221G-SH2-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to N female bulkhead low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N female bulkhead low loss cable 12 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W05822-12 can also be known as a low loss SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3W05822-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05822-12 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 12 inch length using LMR-195 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

324

PE8221

Pasternack Enterprises

Key Specifications, Block Type: Inner/Outer, Impedance: 50 Ohm, Connector In Series: TNC, Connector In Gender: Male, Connector Out Series: TNC, Connector Out Gender: Female, Minimum Frequency: 10 MHz, Maximum Frequency: 18 GHz, Maximum VSWR: 1.35:1. DC Block on Inner and Outer Conductor 50 Ohm TNC Male to TNC Female Operating From 10 MHz to 18 GHz. PE8221 is a coaxial RF DC block is from Pasternack and has an 50 Ohm impedance. Our 50 Ohm DC block is manufactured with a TNC input and TNC output. This TNC DC block is an inner/outer direct current block type. Pasternack inner/outer TNC DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 18 GHz. PE8221 TNC inner/outer DC block has a maximum insertion loss of 0.75 dB and a maximum VSWR of 1.35:1. This inner/outer TNC RF direct current block is just one of over 40,000 components for RF, microwave and millimeter wave applications supplied by Pasternack. Our coaxial DC block with TNC connectors is available to buy and be shipped globally the same day as with Pasternack's other RF parts in stock.

1 : $625.0
10 : $600.0
25 : $575.0

PE3822-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 18 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3822-18, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3822-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3822-18 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 18 inch length using RG405 coax.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

PE3C10822-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPS Female to SMPS Female VITA 67.3 Cable 12 Inch Length Using PE-P047HF Coax., Pasternack’s PE3C10822-12 VITA 67.3 SMPS female to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and an SMPS cable connection on the other. Our SMPS to SMPS cable assembly has a female gender on end 1 and a female on end 2. PE3C10822-12 can also be known as a VITA 67.3 SMPS jack to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10822-12 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMPS female to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10822-12 SMPS jack to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. This VITA 67.3 SMPS jack to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS VITA 67.3 RF cable assembly as per your requirements.

1 : $333.41
25 : $316.74
50 : $300.07
100 : $286.73

PE3C10822-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPS Female to SMPS Female VITA 67.3 Cable 18 Inch Length Using PE-P047HF Coax., Pasternack’s PE3C10822-18 VITA 67.3 SMPS female to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and an SMPS cable connection on the other. Our SMPS to SMPS cable assembly has a female gender on end 1 and a female on end 2. PE3C10822-18 can also be known as a VITA 67.3 SMPS jack to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10822-18 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMPS female to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10822-18 SMPS jack to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMPS cable assembly is manufactured with SMPS to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 18-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. This VITA 67.3 SMPS jack to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMPS cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS VITA 67.3 RF cable assembly as per your requirements.

1 : $345.31
25 : $328.04
50 : $310.78
100 : $296.97

PE3C8221

Pasternack Enterprises

PE3W08221/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. BNC Male to N Male Right Angle Cable Using LMR-400-UF Coax with HeatShrink. PE3W08221/HS is a BNC male to N male right angle cable using LMR-400-UF coax. This Pasternack BNC male to N male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. BNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08221/HS BNC male to N male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE38221

Pasternack Enterprises

PE3C7822-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female Bulkhead Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.1/9.5 mini DIN bulkhead cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to female coax assembly, PE3C7822-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly PE3C7822-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7822-150CM can also be used in the other direction and will be 4.1/9.5 mini DIN female bulkhead to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax.

1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67

PE38221LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female Cable Using PE-C100-LSZH Coax with HeatShrink, LF Solder, RoHS. PE38221LF/HS is a MMCX plug right angle to SMA female cable using PE-C100-LSZH coax. This Pasternack MMCX plug right angle to SMA female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38221LF/HS MMCX plug right angle to SMA female cable assembly is constructed with PE-C100-LSZH coax.

PE3822-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3822-12, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3822-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3822-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using RG405 coax.

1 : $71.99
25 : $68.39
50 : $64.79
100 : $61.91

PE3C9822-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C9822-12 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C9822-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 12 inch length using TCOM-240 coax with Times Microwave components.

1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51

PE3C7822-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female Bulkhead Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.1/9.5 mini DIN bulkhead cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to female coax assembly, PE3C7822-100CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly PE3C7822-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7822-100CM can also be used in the other direction and will be 4.1/9.5 mini DIN female bulkhead to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax.

1 : $125.99
25 : $119.69
50 : $113.39
100 : $108.35

PE3W18221

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SSMC Plug to Mini SMP Male Cable Using PE-047SR Coax. PE3W18221 is a SSMC plug to Mini SMP male cable using PE-047SR coax. This Pasternack SSMC plug to Mini SMP male cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm Mini SMP for connector 2. Our plug SSMC to male Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W18221 SSMC plug to Mini SMP male cable assembly is constructed with PE-047SR coax.

PE3C7822-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female Bulkhead Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.1/9.5 mini DIN bulkhead cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to female coax assembly, PE3C7822-12, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack cable assembly PE3C7822-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7822-12 can also be used in the other direction and will be 4.1/9.5 mini DIN female bulkhead to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

5-2337822-1

TE Connectivity

DISCR.ETH.MAG. 10/100 SINGLE SMT Modular Jack Filter Type: Discrete Magnetic Filter Number of Loaded Positions: 16 Data Rate: .1 Gb/s .01 Gb/s Contact Mating Area Plating Material: Nickel (Ni) Contact Base Material: Phosphor Bronze Discrete Magnetic Filter 16 .1 Gb/s Nickel (Ni) | Discr.eth.mag | Part Number: 5-2337822-1 | Internal Number: 5-2337822-1 | TE Connectivity
RoHS : Compliant

10,000 : $6.33
5,000 : $6.47
2,500 : $6.6
1,000 : $6.75
500 : $6.89
250 : $7.03
100 : $7.16
50 : $7.31
25 : $7.45
10 : $7.59
1 : $7.74

3,894

2288221-1

TE Connectivity

CFP2 EMI/DUST PLUG Connector Cover Type: EMI Plug Dust Cover Primary Product Material: Zinc Alloy Operating Temperature (Max): 85 °C Operating Temperature (Max): 185 °F Operating Temperature Range: -55 – 85 °C EMI Plug Dust Cover Zinc Alloy | Connector Cap & Cover | Part Number: 2288221-1 | Internal Number: 2288221-1 | TE Connectivity
RoHS : Compliant

1,000 : $10.34
500 : $10.63
250 : $10.96
100 : $11.33
50 : $11.66
1 : $12.79

196

Venkel Ltd.

SMPI808068-221MU

VENKEL LTD

Square Miniature Power Inductor;808068;220uH;�20%
RoHS : Compliant

SMPI808068-221NU

VENKEL LTD

Square Miniature Power Inductor;808068;220uH;�30%
RoHS : Compliant

Vyrian

XC8221FRIAAFXUMA1

Infineon Technologies AG

Microcontroller, 8-Bit, 25.6MHz, CMOS
RoHS : Compliant

13,374

DAC8221AWMDA

Analog Devices Inc

D/A Converter, 12-Bit, 2 Func, CMOS, CDIP24
RoHS : Not Compliant

12,163

DAC8221FP

Analog Devices Inc

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.45us Settling Time, PDIP24
RoHS : Not Compliant

12,089

2882213

Phoenix Contact

Surge Arrestors
RoHS : Compliant

10,942

DAC8221HS

Analog Devices Inc

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.45us Settling Time, PDSO24
RoHS : Not Compliant

9,909

74482210002

Wurth Elektronik

Single Phase EMI Filter, 250V, 50HzHz

9,385

AD8221AC-P7

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 0.825MHz Band Width
RoHS : Compliant

8,590

908-22106

Amphenol Corporation

RF MMCX Connector, 1 Contact(s), Female, Board Mount, Solder Terminal, Locking, Jack
RoHS : Compliant

8,525

2982210

Phoenix Contact

Relays/Accessories
RoHS : Compliant

7,794

UCC28221DG4

Texas Instruments

Dual Switching Controller, Current-mode, 0.01A, 2000kHz Switching Freq-Max, BICMOS, PDSO16
RoHS : Compliant

7,346

38221000430

Littelfuse Inc

Electric Fuse, Time Lag Blow, 10A, 250VAC, 100A (IR), Through Hole, TR5
RoHS : Compliant

7,052

908-22101

Amphenol Corporation

RF MMCX Connector, 1 Contact(s), Female, Board Mount, Surface Mount Terminal, Guide Pin, Jack
RoHS : Compliant

5,641

AD8221TRMZ-EP-R7

Analog Devices Inc

Instrumentation Amplifier, 1 Func, 150uV Offset-Max, 0.825MHz Band Width, PDSO8
RoHS : Compliant

4,954

UCC28221PWRG4

Texas Instruments

Dual Switching Controller, Current-mode, 0.01A, 1100kHz Switching Freq-Max, BICMOS, PDSO20
RoHS : Compliant

4,753

ZW-13-19-T-D-888-221

Samtec Inc

Board Stacking Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator
RoHS : Compliant

4,580

Waytek, Inc.

HL8-22-14

NSPA

22-14GA Closed End Connector Clear / Blue Dashes, sealed up to four wires

10 : $0.933
50 : $0.8349
100 : $0.7572
200 : $0.7302
500 : $0.7065
1,000 : $0.6794

1,854

82-2124

Grote Industries Inc

Grote 82-2124 recessed toggle switch plate is a replacement plate for Grote 82-2123 toggle switch assemblies. It supports SPST toggle switch layouts, comes in a pack quantity of 1, and is designed as a recessed plate accessory for panel-mounted switches.

1 : $4.0976
50 : $3.4311
100 : $2.992
200 : $2.813
500 : $2.6829

349

33482-2101

Molex

20 Circuit Dual Row MX150 Male Connector No CPA * Replaced 38416 *
RoHS : Compliant

1 : $2.4273
10 : $2.2051
50 : $2.0333
100 : $1.7707
200 : $1.6596
500 : $1.599

180

Win Source Electronics

NSI8221N1-DSPR

Suzhou Novosense Microelectronics Co Ltd

2CH DGTL ISO
RoHS : Compliant

645 : $0.5238
480 : $0.5842
375 : $0.6044
270 : $0.6245
175 : $0.6447
75 : $0.7857

239,768

NSI8221W1-DSWVR

Suzhou Novosense Microelectronics Co Ltd

2CH REINFORCED DGTL ISO
RoHS : Compliant

465 : $0.7234
350 : $0.807
270 : $0.8347
195 : $0.8626
130 : $0.8904
55 : $1.0852

95,678

KTY82/210

Nexperia

Temp Sensor Automotive 3-Pin TO-236AB T/R / Silicon temperature sensors

405 : $0.7455
325 : $0.7758
250 : $0.8061
175 : $0.8667
115 : $0.897
55 : $0.9576

60,000

KTY82-210

Nexperia

NXP Semiconductors KTY82/TO-236AB//210/REEL 11 Q3/T4*STANDARD MARK S

405 : $0.7455
325 : $0.7758
250 : $0.8061
175 : $0.8667
115 : $0.897
55 : $0.9576

60,000

NSI8221N0-DSPR

Suzhou Novosense Microelectronics Co Ltd

2CH DGTL ISO
RoHS : Compliant

650 : $0.517
490 : $0.5767
380 : $0.5966
275 : $0.6164
180 : $0.6364
75 : $0.7755

27,419

RTL8221B-VB-CG

Realtek Semiconductor

Ethernet Transceiver SGMII QFN-48 Drivers, Receivers, Transceivers RoHS

176 : $1.9093
132 : $2.1296
102 : $2.203
74 : $2.2764
48 : $2.3499
20 : $2.8638

26,000

AD8221BR

Analog Devices Inc

Precision Instrumentation Amplifier | IC INST AMP 1 CIRCUIT 8SOIC
RoHS : Not Compliant

32 : $10.6654
24 : $11.8961
19 : $12.3063
14 : $12.7165
9 : $13.1267
4 : $15.9982

10,824

AD8221ARM-REEL7

Analog Devices Inc

IC OPAMP INSTR 825KHZ 8MSOP
RoHS : Not Compliant

17 : $18.4963
13 : $19.2482
10 : $20.0
7 : $21.5038
5 : $22.2557
3 : $23.7594

9,390

AD8221AR

Analog Devices Inc

IC OPAMP INSTR 825KHZ 8SOIC
RoHS : Not Compliant

17 : $18.6364
13 : $19.394
10 : $20.1516
7 : $21.6667
5 : $22.4243
3 : $23.9394

8,000

VSC8221XHH

Microsemi Corporation (now Microchip)

IC PHY 10/100/1000 SGL 100-TFBGA / PHY 1-CH 10Mbps/100Mbps/1Gbps/1.25Gbps 1.2V/3.3V 100-Pin TFBGA Tray
RoHS : Compliant

13 : $23.9226
10 : $26.6829
8 : $27.603
6 : $28.5231
4 : $29.4432
2 : $35.8839

7,901

AD8221AR-REEL

Analog Devices Inc

IC OPAMP INSTR 825KHZ 8SOIC
RoHS : Not Compliant

17 : $18.6364
13 : $19.394
10 : $20.1516
7 : $21.6667
5 : $22.4243
3 : $23.9394

7,650

AD8221AR-REEL7

Analog Devices Inc

Precision Instrumentation Amplifier
RoHS : Not Compliant

17 : $18.6364
13 : $19.394
10 : $20.1516
7 : $21.6667
5 : $22.4243
3 : $23.9394

7,480

TPSM828221SILR

Texas Instruments

5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 1.2V 2A 2.4V - 5.5V Input
RoHS : Compliant

9 : $37.2728
7 : $38.7879
5 : $40.3031
4 : $43.3334
3 : $44.8485
2 : $47.8788

5,600

AD8221ARM

Analog Devices Inc

Precision Instrumentation Amplifier | IC INST AMP 1 CIRCUIT 8MSOP
RoHS : Not Compliant

26 : $11.6764
20 : $13.0237
15 : $13.4728
11 : $13.9219
7 : $14.371
3 : $17.5146

5,000

LE88221DLC

Microchip Technology Inc

IC VOICEPORT ABS 2CH 80LQFP
RoHS : Compliant

8 : $40.0511
6 : $44.6724
5 : $46.2128
4 : $47.7532
3 : $49.2936
1 : $60.0766

654

8221G-SH2-R Distributor

Link URL