| Electronic Components Datasheet Search |
|
8501G-SH2-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 585010000011 | Essentra Components | WASHER FLAT M4 PLASTIC |
| 4,696 | |
1461850100![]() | Molex | RF ANT 892MHZ/1.9GHZ FLAT 100MM RoHS : Compliant |
| 1,221 | ||
| 4850.1310 | Schurter Electronic Components | CONN PLUG MALE DIN 3P SOLDER CUP RoHS : Compliant |
| 1,021 | ||
| 5962-8778501CA | Rochester Electronics LLC | IC OP AMP 1CH 14-CERDIP |
| 842 | ||
| 5962-8778501CA | Rochester Electronics LLC | MICROCIRCUIT, LINEAR, WIDEBAND, |
| 464 | ||
| LCBS-8-5-01 | Essentra Components | BOARD SPT SNAP LOCK NYLON 5/16" |
| 274 | ||
| 095-850-188M400 | Amphenol RF | COAX CBL HD-BNC TO HD-BNC 13.1' |
| 124 | ||
| 4850-12-1212-0300 | Parker Chomerics | RFI COND FOAM URATHANE PSA |
| 105 | ||
| WJ128-5.0-10P-14-RNA | Reliance North America | 10 position PCB push-in spring c |
| 50 | ||
| 095-850-188-006 | Amphenol RF | COAX CBL HD-BNC TO HD-BNC 6" |
| 33 | ||
| 4850-10-0610-0500 | Parker Chomerics | RFI COND FOAM URATHANE FEET |
| 27 | ||
| 095-850-130M025 | Amphenol RF | COAX CBL BNC TO HD-BNC 9.8" |
| 26 | ||
| 778685-01 | NI | DIN-RAIL VERTICAL MOUNT 37-PIN S |
| 2 | ||
| 8501 | Heyco | HFC 3/8-S-90-TWIST GRAY |
| 0 | ||
| 8501 | Abbatron | SPCR 8501 AL RND |
| 0 | ||
![]() Avnet Americas | 560085-0101 | Molex | Terminal, Socket, Automotive, Wire to Board Connector, Tin, Phosphor Bronze, Cable Mount, Straight - Tape and Reel (Alt: 5600850101) RoHS : Compliant |
| 528,000 | |
| 1418850-1 | TE Connectivity | Contact, AMP MCON Series, Socket, Crimp, 15 AWG, Tin Plated Contacts - Tape and Reel (Alt: 1418850-1) RoHS : Compliant |
| 156,000 | ||
| 146850-1 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 146850-1) RoHS : Not Compliant |
| 99,105 | ||
| 5-146850-1 | TE Connectivity | - Bag (Alt: 5-146850-1) RoHS : Compliant |
| 98,680 | ||
| 250-8501-010 | ITT Interconnect Solutions | Connector Accessories Extended Jackscrew Brass Nickel Finish - Bulk (Alt: 250-8501-010) RoHS : Compliant |
| 4,620 | ||
| PH9385.015NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PH9385.015NLT) RoHS : Compliant |
| 1,500 | ||
| 2102850-1 | TE Connectivity | BP, CENTER, RTM, MULTIGIG RT 2R - Bag (Alt: 2102850-1) RoHS : Not Compliant |
| 44 | ||
| 4785.0100 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 4785.0100) RoHS : Compliant |
| 3 | ||
| TW-10-12-L-D-850-110 | Samtec Inc | - Bulk (Alt: TW-10-12-L-D-850-110) RoHS : Compliant |
| 0 | ||
| TW-16-12-T-D-850-110 | Samtec Inc | - Bulk (Alt: TW-16-12-T-D-850-110) RoHS : Compliant |
| 0 | ||
| 095-850-185-018 | Amphenol Corporation | RF / Coaxial Cable Assembly, 18 ", 457 mm, RG316, HD BNC Plug, HD BNC Plug, 50 ohm" - Bag (Alt: 095-850-185-018) RoHS : Not Compliant |
| 0 | ||
| 095-850-185-012 | Amphenol Corporation | RF / Coaxial Cable Assembly, 12 ", 305 mm, RG316, HD BNC Plug, HD BNC Plug, 50 ohm" - Bag (Alt: 095-850-185-012) RoHS : Not Compliant |
| 0 | ||
| 095-850-130M025 | Amphenol Corporation | RF / Coaxial Cable Assembly, 9.8 ", 250 mm, Belden 1855A, BNC Plug, HD BNC Plug, 75 ohm" - Bag (Alt: 095-850-130M025) RoHS : Compliant |
| 0 | ||
| 095-850-160L050 | Amphenol Corporation | RF / Coaxial Cable Assembly, 50ft, 15.24m, Belden 1694A, HD BNC Plug, HD BNC Plug, 75 ohm - Bag (Alt: 095-850-160L050) RoHS : Compliant |
| 0 | ||
| 095-850-162M075 | Amphenol Corporation | RF / Coaxial Cable Assembly, 29.5 ", 750 mm, Belden 1505A, BNC Plug, HD BNC Plug, 75 ohm" - Bag (Alt: 095-850-162M075) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 885012004007 | Wurth Elektronik | CAP, 18PF, 25V, MLCC, 0201; RoHS : Compliant |
| 14,060 | |
| 885012004007 | Wurth Elektronik | CAP, 18PF, 25V, MLCC, 0201; RoHS : Compliant |
| 14,060 | ||
| 885012005024 | Wurth Elektronik | CAP, 6.8PF, 16V, C0G/NP0, 0402; RoHS : Compliant |
| 5,292 | ||
| 885012005024 | Wurth Elektronik | CAP, 6.8PF, 16V, C0G/NP0, 0402; RoHS : Compliant |
| 5,292 | ||
| 885012006041 | Wurth Elektronik | CAP, MLCC, NP0, 330PF, 25V, 0603; RoHS : Compliant |
| 2,069 | ||
| 885012006041 | Wurth Elektronik | CAP, MLCC, NP0, 330PF, 25V, 0603; RoHS : Compliant |
| 2,069 | ||
| TW-10-12-L-D-850-110 | Samtec Inc | CONN STACK BRD, 2MM, 20POS, HDR; RoHS : Compliant |
| 169 | ||
| TW-16-12-T-D-850-110 | Samtec Inc | CONN STACK BRD, 2MM, 32POS, HDR; RoHS : Compliant |
| 117 | ||
| DW-24-15-L-S-285-011 | Samtec Inc | CONN STACK BRD, 2.54MM, 24POS, HDR; RoHS : Compliant |
| 98 | ||
| TW-50-12-G-D-850-195 | Samtec Inc | CONN STACK BRD, 2MM, 100POS, HDR; RoHS : Compliant |
| 72 | ||
| HD4850-10 | Crydom Inc | SSR, 4-32VDC, 48-530VAC, 50A; RoHS : Compliant |
| 19 | ||
| CN8501RTD-F1-A | Omega Engineering | TEMPERATURE CONTROLLER CE; RoHS : Not Compliant |
| 1 | ||
| 8501 | SCS | FIELD SERVICE KIT; RoHS : Compliant |
| 0 | ||
| 8501 | IDEAL-TEK SA | TWEEZER, STRAIGHT/ROUND, 125MM; RoHS : Compliant |
| 0 | ||
| 8501 | SCS | FIELD SERVICE KIT; RoHS : Compliant |
| 0 | ||
![]() RS | 8501 | Heyco | SNAP-IN CONDUIT FITTING, NYLON 6/6, GRAY, SIZE 0.3750 IN, HFC SERIES |
| 1,000 | |
| 8501 | HH Smith | SPACER; 1/4 ROUND; FEMALE; LENGTH 1/4; ID #6; ALUM/CLEAR CHROMATE |
| 509 | ||
| HD4850-10 | Crydom Inc | RELAY, 50 A (MAX.), 48 TO 530 V (RMS), SPST NO, 1200 V, 10 MA (MAX.), PANEL RoHS : Compliant |
| 294 | ||
| 8501K11 | SAFRAN | SWITCH, TOGGLE,2 POLE, OFF-NONE-(ON),11A,115VAC, SEALED, SCREW TERMINAL, MS24524-30 |
| 166 | ||
| S-50C-M-5.6-DG-S (101385-010-927) | Smiths Interconnect | SPRING CONTACT PROBE, CURRENT: 3 A, 4.3/5.6 OZ., RESISTANCE < 25 MO, MAX .250" |
| 93 | ||
| S-50C-SW-5.6-DG-S (101385-016-927) | Smiths Interconnect | SPRING CONTACT PROBE, CURRENT: 3 A, 4.3/5.6 OZ., RESISTANCE < 25 MO, MAX .250" |
| 79 | ||
| MP850-100-1% | Caddock Electronics Inc | RESISTOR, POWER FILM, TO-220 STYLE, 100 OHM, 1%, 50W RoHS : Compliant |
| 73 | ||
| 250-8501-013 | ITT Interconnect Solutions | CONNECTOR DSUB THUMBSCREW BRASS/NICKEL RoHS : Compliant |
| 36 | ||
| CWD4850-10 | Crydom Inc | RELAY, 50 A, 48 TO 660 V (RMS) AT 47 TO 63 HZ, SOLID-STATE, SCREW, PANEL MOUNT RoHS : Compliant |
| 25 | ||
| 8501 | SCS | PORTABLE FIELD SERVICE KIT, ESD SAFE, ADJUSTABLE WRIST STRAP, 2 - 8 X 11 POCKETS |
| 17 | ||
| QSL-G1/8-8-50 (132050) | Festo | FITTING, L, NKL PL BRASS, AIR, G1/8 MALE, 8MM PUSH IN CONN |
| 16 | ||
| 8501CO6V29 | Square D by Schneider Electric | POWER RELAY,4 PIN,480 VAC, SPST-NO, PANEL MOUNT,10A,600 VAC, SCREW,8501C SERIES |
| 2 | ||
| 98378501 (9837-8501) | Siemens | TALON PTS-13 MTG DEV W/CP ; 9837-8501 |
| 1 | ||
| 8501 | HH Smith | SPACER, #6, ALUMINUM, 1/4 IN., 0.250 IN. |
| 0 | ||
| 8501 | SKF | DEEP GROOVE BALL BEARING, I.D. 12 MM, O.D. 32 MM, W 12.7 MM |
| 0 | ||
![]() Microchip Technology Inc | VSC8501XML | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII, QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 4,256 | |
| 5962-9958501QYC | Microchip Technology Inc | A42MX36-CQ208B, Projected EOL: 2051-02-04 |
| 2 | ||
| 08698-501 | Microchip Technology Inc | MD LC01570 6-12 SPECIAL DFS (2110C) [DISCIPLINED FREQ STD], Projected EOL: 2028-01-13 - Contact for Pricing | 0 | |||
| MS8501-34 | Microchip Technology Inc | Si Schottky Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| MS8501-M34 | Microchip Technology Inc | GaAs Schottky Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| 992-48501-110 | Microchip Technology Inc | OBS LC03063 10-22 TIMEPICTRA 11.0 SOFTWARE, Projected EOL: 2028-01-13 - Contact for Pricing | 0 | |||
| VSC8501XML-03 | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII (Ind. Temp), QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | ECH8501-TL-H | onsemi | Bipolar Transistor, (-)30V, (-)30A, Low VCE(sat), Complementary Dual RoHS : Compliant |
| 309 | |
NCV8501DADJG![]() | onsemi | Adjustable Positive LDO Regulator, 1.242V Min, 1.318V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant |
| 49 | ||
| TVS8501V5MUT5G | onsemi | Trans Voltage Suppressor Diode, 5V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 27,919,792 | ||
| FDBL86561-F085-01 | onsemi | FDBL86561 - N-Channel PowerTrench MOSFET 60 V, 300 A RoHS : Compliant |
| 27,855 | ||
LP8501TME/NOPB![]() | Texas Instruments | LED Driver ICs DC DC Regulator 25.5mA 25-BGA T/R RoHS : Compliant |
| 250 | ||
ONET8501PRGTT![]() | Texas Instruments | Telecom Circuit, 1-Func, PQCC16 RoHS : Compliant |
| 41,652 | ||
ONET8501PRGTR![]() | Texas Instruments | Telecom Circuit, 1-Func, PQCC16 RoHS : Compliant |
| 30,750 | ||
UCC28501DW![]() | Texas Instruments | Power Factor Correction Average Current 18V 20-SOIC Tube RoHS : Compliant |
| 12,275 | ||
| 5962-8778501CA | Harris Semiconductor | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDIP14 RoHS : Not Compliant |
| 842 | ||
| MUR850119 | Harris Semiconductor | Rectifier Diode, 8A, 500V RoHS : Not Compliant |
| 750 | ||
| 5962-85016013A | Intersil Corporation | Interrupt Controller, 80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800 Compatible, CMOS, CQCC28 RoHS : Not Compliant |
| 591 | ||
5962-8778501CA![]() | Intersil Corporation | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDIP14 RoHS : Not Compliant |
| 464 | ||
| LP8501TME/NOPB | National Semiconductor Corporation | LED Driver ICs DC DC Regulator 25.5mA 25-BGA T/R RoHS : Compliant |
| 37 | ||
| UCC28501DW | Unitrode Corporation | Power Factor Correction Average Current 18V 20-SOIC Tube RoHS : Compliant |
| 25 | ||
| UCC28501N | Unitrode Corporation | Power Factor Controller With Post Regulator, Current-mode, 1.2A, 120kHz Switching Freq-Max, BICMOS, PDIP20 RoHS : Compliant |
| 4,384 | ||
![]() Sager | TW-10-12-L-D-850-110 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 169 | |
| TW-16-12-T-D-850-110 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 117 | ||
| M-485-01 | Littelfuse Inc | MOM P/P SW N.O 2POS 10A/12VDC | 0 | |||
| TW-08-12-L-D-850-180 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-12-G-S-850-185 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 1-2385010-1 | TE Connectivity | Pluggable Terminal Blocks 11 POS SPRING TB PLUG, PITCH 7.62 RoHS : Compliant |
| 0 | ||
| 2385011-8 | TE Connectivity | Pluggable Terminal Blocks 8P TB HDR 90 DEG,PITCH 7.62 &TL 3.1 mm RoHS : Compliant |
| 0 | ||
1461850100![]() | Molex | Antennas MULTI-BAND ANTENNA RoHS : Compliant |
| 0 | ||
| 1300850160 | Molex | Cable Mounting & Accessories 114300 REEL W/J-BOX(NO GROUND) | 0 | |||
| 5600850101 | Molex | Automotive Connectors DURACLIK TERMINAL FM 22-26 AWG RoHS : Compliant |
| 0 | ||
| 4850.1310 | Schurter Electronic Components | Circular DIN Connectors DIN PLUG 3 POLE RoHS : Compliant |
| 0 | ||
| 2HMP8-501 | Sensata Technologies | Industrial Pressure Sensors Hermetic pressure sensor, SS, 1/8NPT, 0-50bar absolute |
| 0 | ||
| 0459850143 | Molex | Power to the Board LPH Signal Plug Asm 24 ckt short RoHS : Compliant |
| 0 | ||
| 0528485010 | Molex | Molex | 0 | |||
| 04-1298-5015 | TE Connectivity | RT8420-0002-121-1310 |
| 0 | ||
![]() TME | 095-850-192M100 | Amphenol Corporation | Cable; BNC; black; 12GHz; 75Ω |
| 21 | |
| 0090100850100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 8.5mm; L: 79mm; Working part len: 37mm |
| 10 | ||
| 0018400850100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 8.5mm; L: 117mm; high speed steel; blister |
| 7 | ||
| 095-850-162L050 | Amphenol Corporation | Cable; 15.24m; BNC male; black; straight; 3GHz; 75Ω; male |
| 2 | ||
| 095-850-185-012 | Amphenol RF | Cable; 0.305m; BNC HD male,both sides; straight; 50Ω |
| 0 | ||
| 0012100850100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 8.5mm; L: 390mm; high speed steel; case |
| 0 | ||
| 0020202850100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 28.5mm; L: 296mm; high speed steel |
| 0 | ||
| 095-850-188M100 | Amphenol RF | Cable; 1m; BNC HD male,both sides; straight; 75Ω |
| 0 | ||
| 10048501 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 36; THT; 3A; 250V; 1x36 |
| 0 | ||
| 1057850150 | Weidmüller Interface GmbH & Co. KG | 1057850150 RoHS : Compliant |
| 0 | ||
| 1058501000 | Weidmüller Interface GmbH & Co. KG | 1058501000 RoHS : Compliant |
| 0 | ||
| 0615600850100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 8.5mm; L: 117mm; cemented carbide; case |
| 0 | ||
| 095-850-186-024 | Amphenol RF | Cable; 0.61m; BNC male,both sides; straight; 75Ω |
| 0 | ||
| 095-850-186-600 | Amphenol RF | Cable; 15.24m; BNC male,both sides; straight; 75Ω |
| 0 | ||
| 095-850-188-036 | Amphenol RF | Cable; 0.914m; BNC HD male,both sides; straight; 75Ω |
| 0 | ||
![]() Ameya Holding Limited | 885012206024 | Wurth Elektronik | Wurth Elektronik WCAP-CSGP 470nF ±10% X7R电介质 10 V 直流 多层陶瓷电容器, 外壳尺寸0603 RoHS : Compliant | 104,000 | ||
| LP38501TSX-ADJ/ NOPB | Texas Instruments | 15,500 | ||||
TPS628501QDRLRQ1![]() | Texas Instruments | RoHS : Compliant | 2,579 | |||
LP38501TSX-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A TO263-5 RoHS : Compliant | 2,000 | |||
LP38501TJ-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A 5PFM RoHS : Compliant | 800 | |||
![]() ComSIT USA | SRS8501 | Essentra Components | AVAILABLE EU | 266 | ||
| GEN0078501A | BOYD CORPORATION | AVAILABLE EU | 396 | |||
| 4850181 | Schurter Electronic Components | AVAILABLE EU | 28 | |||
| 8,85012E+11 | WUERTH ELEKTRONIK ITALIA SRL | AVAILABLE EU | 7,199 | |||
| 8,85012E+11 | WURTH ELEKTRONIK (WURTH ELECTRONICS) | AVAILABLE EU | 1,780 | |||
![]() ComSIT USA | 8,85012E+11 | Adolf Wuerth Gmbh & Co Kg | Cap Ceramic 1uF 50V X7R 10% Pad SMD 0805 125�C T/R RoHS : Compliant | 241,910 | ||
NCV8501D80R2G![]() | onsemi | Fixed Positive LDO Regulator, 8V, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 57,500 | |||
NDH8501N![]() | Fairchild Semiconductor Corporation | DUAL N-CHANNEL ENHANCEMENT MODE FIELD EFFECT TRANSISTOR Small Signal Field-Effect Transistor, 2.8A I(D), 30V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 42,000 | |||
| VSMG285011RG | Vishay Intertechnologies | Infrared LED, 1.8mm, 1-Element, 850nm RoHS : Compliant | 6,000 | |||
ONET8501PRGTR![]() | Texas Instruments | 11.3 GIGA BITS PER SECOND RATE-SELECTABLE LIMITING AMPLIFIER Telecom Circuit, 1-Func, PQCC16 RoHS : Compliant | 1,700 | |||
| PH9185011NLT | Pulse Electronics Corporation | Power Transformer 1CT:1CT 5000Vrms 6 Terminal Gull Wing SMD RoHS : Compliant | 1,050 | |||
| MAXI850130NC | Sensata Technologies | Electronic Component RoHS : Not Compliant | 740 | |||
| LP38501TSXADJNOPB | Texas Instruments | 3 AMP FLEXCAP LOW DROPOUT LINEAR REGULATOR FOR 2.7V TO 5.5V INPUT Adjustable Positive LDO Regulator, 0.6V Min, 5V Max, 0.665V Dropout, CMOS, PSSO5 RoHS : Compliant | 650 | |||
NCV8501DADJG![]() | onsemi | MICROPOWER 150 MILLIAMP LDO LINEAR REGULATOR WITH ENABLE, DELAY, RESET BAR, MONITOR FLAG Adjustable Positive LDO Regulator, 1.242V Min, 1.318V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 319 | |||
NCV8501PDW50R2G![]() | onsemi | MICROPOWER 150 MILLIAMP LDO LINEAR REGULATOR WITH ENABLE, DELAY, RESET BAR, MONITOR FLAG Fixed Positive LDO Regulator, 5V, 0.6V Dropout, BIPolar, PDSO16 RoHS : Compliant | 250 | |||
| R785010 | RECOM Power GmbH | Electronic Component RoHS : Compliant | 105 | |||
| ASP10588501 | Samtec Inc | .050 CENTERLINE TERMINAL ASSEMBLY Board Connector, 114 Contact(s), 6 Row(s), Male, Straight, 0.050 inch Pitch, Surface Mount Terminal RoHS : Not Compliant | 43 | |||
| DSXE2RS67PS57P8501 | Radiall | ENVIRONMENTAL SIZE RECEPTACLE CONNECTOR 124 Contact(s), Male, Crimp Terminal, Receptacle RoHS : Not Compliant | 20 | |||
| SDT8501RDQN | Sumitomo Wiring Systems LTD | Fiber Optic Device RoHS : Compliant | 4 | |||
| 596285016023A | Intersil Corporation | CMOS Priority Interrupt Controller Interrupt Controller, 80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800 Compatible, CMOS, CQCC28 RoHS : Not Compliant | 2 | |||
![]() Interstate Connecting Components | 095-850-185-018 | Amphenol RF | HD-BNC STRAIGHT PLUG TO HD-BNC | 0 | ||
| 095-850-185-012 | Amphenol RF | HD-BNC STRAIGHT PLUG TO HD-BNC | 0 | |||
| 095-850-130M025 | Amphenol RF | BNC STRAIGHT PLUG TO HD-BNC ST | 0 | |||
| 095-850-160L050 | Amphenol RF | HD-BNC STRAIGHT PLUG TO HD-BNC | 0 | |||
| 095-850-162M075 | Amphenol RF | BNC STRAIGHT PLUG TO HD-BNC ST | 0 | |||
| 095-850-162M200 | Amphenol RF | BNC STRAIGHT PLUG TO HD-BNC ST | 0 | |||
| 095-850-188-006 | Amphenol RF | HD-BNC STRAIGHT PLUG TO HD-BNC | 0 | |||
| 095-850-188M400 | Amphenol RF | HD-BNC STRAIGHT PLUG TO HD-BNC | 0 | |||
| 1-2385010-1 | TE Connectivity | 11 POS SPRING TB PLUG, PITCH RoHS : Compliant |
| 0 | ||
| 2385011-8 | TE Connectivity | 8P TB HDR 90 DEG,PITCH 7.62 &T RoHS : Compliant |
| 0 | ||
| 250-8501-040 | ITT Interconnect Solutions | 2508501040 | 0 | |||
| 155585-0121 | ITT Interconnect Solutions | MKJ4C7F8-13DC | 0 | |||
| 102-8501-000 | ITT Interconnect Solutions | 102-8501-000 | 0 | |||
| 04-1298-5015 | TE Connectivity | RT8420-0002-121-1310 | 0 | |||
| 41850131817PN | Amphenol PCD | TV | 0 | |||
![]() NexGen Digital | 8501501XA | Harris Semiconductor | 9 | |||
![]() PEI Genesis | 095-850-156M10L | Amphenol RF |
| 0 | ||
| 095-850-160L050 | Amphenol RF |
| 0 | |||
| 095-850-162M075 | Amphenol RF |
| 0 | |||
| 095-850-162M200 | Amphenol RF |
| 0 | |||
| 23A03585-01 | SOURIAU-SUNBANK |
| 0 | |||
| 250-8501-013 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 095-850-130-018 | Amphenol RF |
| 0 | |||
| 095-850-155-048 | Amphenol RF |
| 0 | |||
| 095-850-157M125 | Amphenol RF |
| 0 | |||
| 095-850-160-060 | Amphenol RF |
| 0 | |||
| S2182F1850-1-12C | SOURIAU-SUNBANK |
| 0 | |||
| 095-850-156-006 | Amphenol RF |
| 0 | |||
| 095-850-159L075 | Amphenol RF |
| 0 | |||
| 095-850-162-018 | Amphenol RF |
| 0 | |||
| 095-850-165L050 | Amphenol RF |
| 0 | |||
![]() Powell Electronics | TW-02-12-SM-S-850-150 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 898 | |
| TW-03-12-L-D-850-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 205 | ||
| TW-10-12-L-D-850-110 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 112 | ||
| TW-15-12-S-S-850-135 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 112 | ||
| 095-850-156-006 | Amphenol RF | HD-BNC Plug to 1.0-2.3 Plug Belden 1505A |
| 83 | ||
| TW-16-12-T-D-850-110 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 77 | ||
| DW-24-15-L-S-285-011 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 65 | ||
| TW-50-12-G-D-850-195 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 48 | ||
| 868850-1 | TE Connectivity | Power Connectors RoHS : Not Compliant |
| 24 | ||
| 095-850-160-060 | Amphenol RF | HD-BNC Plug to HD-BNC Plug Belden 1694A |
| 23 | ||
| 2388501-1 | TE Connectivity | TE COMPONENT (REF 2388501-1) RoHS : Compliant |
| 7 | ||
| 72-185012-08P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 3 | ||
| 72-185012-04S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 3 | ||
| 45885010 | Hartmann Electronic | AERO RELAY/CONTACTOR 45885010 |
| 2 | ||
| 095-850-185-012 | Amphenol RF | HD-BNC Plug to HD-BNC Plug RG-316 Cable |
| 1 | ||
![]() PUI | 12.88501 | 30,854 | ||||
| 12.85013 | 707 | |||||
| 12.85016 | 85 | |||||
![]() Chip 1 Exchange | 2348501-2 | TE Connectivity | INSTOCK RoHS : Compliant | 195,000 | ||
| 503308-5010 | Molex | INSTOCK RoHS : Compliant | 97,500 | |||
| 6H6778501 | INSTOCK | 80,000 | ||||
| 503308-5012 | Molex | INSTOCK RoHS : Compliant | 46,800 | |||
| 250-8501-009 | ITT Interconnect Solutions | INSTOCK RoHS : Compliant | 6,683 | |||
| 2-6450850-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,434 | |||
| PH485-01010 | INSTOCK | 2,268 | ||||
| 45985-0142 | Molex | INSTOCK | 1,545 | |||
| C7S-12.000-18-50100-X1R | INSTOCK | 714 | ||||
| 1D50518-501 | INSTOCK | 59 | ||||
| 885012005074- | Wurth Elektronik | INSTOCK | 56 | |||
| 538-501331-1107 | Molex | INSTOCK | 10 | |||
| 1D49678-501 | INSTOCK | 7 | ||||
| 1D85016-501 | INSTOCK | 1 | ||||
| 1D85010-1 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 5600850101 | Molex | DuraCliktrade 560085 22 AWG (Alt: 5600850101) RoHS : Compliant | 360,000 | ||
| 1418850-1 | TE Connectivity | Contact AMP MCON Series Socket Crimp 15 AWG Tin Plated Contacts (Alt: 1418850-1) RoHS : Compliant | 26,000 | |||
| M80-8501042 | Harwin | Datamate LTek DIL Female Vertical 3mm PC Tail Connector gold clip tin shell 55 contacts (Alt: M80-8501042) RoHS : Compliant | 4,266 | |||
| 850-10-025-40-001101 | PRECI-DIP SSA | Conn Unshrouded Header HDR 25 POS 127mm Solder RA SMD Bulk (Alt: 850-10-025-40-001101) RoHS : Compliant | 3,120 | |||
| PH9385.012NLT | Pulse Electronics Corporation | XFMRPUSHPULLSIDE CAR S NPB - Tape and Reel (Alt: PH9385.012NLT) RoHS : Compliant | 2,700 | |||
| PH9185.011NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PH9185.011NLT) RoHS : Compliant | 1,800 | |||
| PH9185.012NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PH9185.012NLT) RoHS : Compliant | 1,500 | |||
| 2388501-6 | TE Connectivity | CHARGE INLET COMBO 1 LED 90 DEGREE (Alt: 2388501-6) RoHS : Compliant | 16 | |||
| 095-850-189-048 | Amphenol Corporation | RF Coaxial Cable Assembly 4ft 12m Belden 4855R BNC Plug HD BNC Plug 75 ohm (Alt: 095-850-189-048) RoHS : Compliant | 10 | |||
| 2385011-8 | TE Connectivity | Connector Shrouded Header 8 Position 762mm Solder Right Angle Through Hole Box (Alt: 2385011-8) RoHS : Compliant | 0 | |||
| 1-2385010-1 | TE Connectivity | Connector Pluggable Terminal Block Plug 11 Position 762mm PushIn Straight 20A Box (Alt: 1-2385010-1) RoHS : Compliant | 0 | |||
| 095-850-160L050 | Amphenol Corporation | RF Coaxial Cable Assembly 50ft 1524m Belden 1694A HD BNC Plug HD BNC Plug 75 ohm (Alt: 095-850-160L050) RoHS : Compliant | 0 | |||
| 095-850-162M075 | Amphenol Corporation | RF Coaxial Cable Assembly 295 750 mm Belden 1505A BNC Plug HD BNC Plug 75 ohm (Alt: 095-850-162M075) RoHS : Compliant | 0 | |||
| 095-850-162M200 | Amphenol Corporation | RF Coaxial Cable Assembly 66ft 2m Belden 1505A BNC Plug HD BNC Plug 75 ohm (Alt: 095-850-162M200) RoHS : Compliant | 0 | |||
| 095-850-188M400 | Amphenol Corporation | RF Coaxial Cable Assembly 131ft 4m Belden 4855R HD BNC Plug HD BNC Plug 75 ohm (Alt: 095-850-188M400) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PM2185.012NLT | Pulse Electronics Corporation | Power Transformer 1CT:2CT Dual prim. Dual Sec. SMD T/R (Alt: PM2185.012NLT) RoHS : Compliant |
| 6,000 | |
| G825M08501D5HR | Amphenol Corporation | (Alt: G825M08501D5HR) RoHS : Compliant |
| 4,900 | ||
| ASP-206885-01 | Samtec Inc | CUSTOM IPBS ASSEMBLY (Alt: ASP-206885-01) RoHS : Compliant | 4,000 | |||
| 4850.1410 | Schurter Electronic Components | (Alt: 4850.1410) RoHS : Compliant | 0 | |||
| 095-850-166M30L | Amphenol Corporation | RF / Coaxial Cable Assembly, 98.4ft, 30m, Belden 1694A, BNC Plug, BNC Plug, 75 ohm (Alt: 095-850-166M30L) RoHS : Not Compliant | 0 | |||
| 4785.0100 | Schurter Electronic Components | (Alt: 4785.0100) RoHS : Compliant | 0 | |||
| 498-5010-062 | Amphenol Corporation | (Alt: 498-5010-062) RoHS : Compliant | 0 | |||
| 2-926850-1 | TE Connectivity | MAG MATE LEAF KONT (Alt: 2-926850-1) RoHS : Compliant | 0 | |||
| PI6CBF18501ZLAIEX | Diodes Incorporated | Clock Buffer, PCIe Fanout, 1 MHz to 200 MHz, 5 Outputs, 1.7 V to 1.9 V, 40 Pins, TQFN-EP (Alt: PI6CBF18501ZLAIEX) RoHS : Compliant | 0 | |||
| PH9185.011NLT | Pulse Electronics Corporation | (Alt: PH9185.011NLT) RoHS : Compliant | 0 | |||
| PFE850-12-054NA | Bel Fuse | AC/DC Front End Power Supply (PSU), 1 Output, Fixed, 850 W, 12 V, 70 A (Alt: PFE850-12-054NA) RoHS : Compliant | 0 | |||
| SEAF8-50-1-S-08-2-RA | Samtec Inc | (Alt: SEAF8-50-1-S-08-2-RA) RoHS : Compliant | 0 | |||
| 095-902-485-012 | Amphenol Corporation | RF / Coaxial Cable Assembly, 12 ", 305 mm, RG316, MMCX Right Angle Plug, SMA Plug, 50 ohm" (Alt: 095-902-485-012) RoHS : Compliant | 0 | |||
| SEAF8-50-1-S-04-2-RA | Samtec Inc | (Alt: SEAF8-50-1-S-04-2-RA) RoHS : Compliant | 0 | |||
| PM2185.012NLBT | Pulse Electronics Corporation | (Alt: PM2185.012NLBT) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 885010TR | Qorvo | RF BAW Notch Filter 2440MHz 50Ohm 30 to 85C 10Pin CSP TR (Alt: 885010TR) RoHS : Compliant | 0 | ||
| 85015013A | Renesas Electronics Corporation | (Alt: 85015013A) RoHS : Not Compliant | 0 | |||
| VSC8501XML | Microchip Technology Inc | (Alt: VSC8501XML) RoHS : Compliant | 0 | |||
| CDBWM8850-1 | Cirrus Logic | WM88506200FL48EV1 (Alt: CDBWM8850-1) RoHS : Compliant | 0 | |||
| ECH8501-TL-H | onsemi | NChannel Power MOSFET 20V 14A 68mO ONSSPCDDENY1E7M (Alt: ECH8501-TL-H) RoHS : Compliant | 0 | |||
NCV8501D50R2G![]() | onsemi | LDO Regulator 150 mA 45 V 90A IQ with Delay Reset Monitor Flag and Enable 50 V ONSSPCLDO (Alt: NCV8501D50R2G) RoHS : Compliant | 0 | |||
| ISL85014FRZ-T | Renesas Electronics Corporation | (Alt: ISL85014FRZ-T) RoHS : Not Compliant | 0 | |||
| 5962-85016023A | Renesas Electronics Corporation | (Alt: 5962-85016023A) RoHS : Not Compliant | 0 | |||
| ISL85014EVAL1Z | Renesas Electronics Corporation | (Alt: ISL85014EVAL1Z) RoHS : Compliant | 0 | |||
| 5962-9308501MXC | Teledyne HiRel | (Alt: 5962-9308501MXC) RoHS : Not Compliant | 0 | |||
| PI6CBF18501ZLAIEX | Diodes Incorporated | Clock Buffer PCIe Fanout 1 MHz to 200 MHz 5 Outputs 17 V to 19 V 40 Pins TQFNEP (Alt: PI6CBF18501ZLAIEX) RoHS : Compliant | 0 | |||
| L1I0-0850150200000 | Lumileds | (Alt: L1I0-0850150200000) RoHS : Compliant | 0 | |||
LPC11E37FBD48/501E![]() | NXP Semiconductors | ARM MCU LPC Family LPC1100 Series Microcontrollers ARM CortexM0 32 bit 50 MHz 128 KB 48 Pins (Alt: LPC11E37FBD48/501E) RoHS : Compliant | 0 | |||
| LPC11E37FBD48/501Y | NXP Semiconductors | ARM MCU 32bit ARM CortexM0 50 MHz 128 KB 12 KB 48 Pins LQFP (Alt: LPC11E37FBD48/501Y) RoHS : Compliant | 0 | |||
| LPC11U35FET48/501,151 | NXP Semiconductors | (Alt: LPC11U35FET48/501,) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SPCM-850-14-BR2 | Excelitas Technologies Corporation | Single Photon Counting Module (SPCM) |
| 0 | |
![]() DB Roberts | 8501 | Heyco | HFC 3/8-S-90-TWIST GRAY | 0 | ||
| LCBS-8-5-01 | Essentra Components | CB SptDual LckNatural5/16 in Spc CB Spt Dual Lock Natural | 0 | |||
| DLCBS8-5-01 | Essentra Components | 0 | ||||
| SRS8-5-01 | Essentra Components | SpacerSlf Ret8 ScrNat5/16 in Spc | 0 | |||
| AE808-5013-REPAIR | PennEngineering (PEM) | 0 | ||||
| NSS-8-5-01 | Essentra Components | 0 | ||||
| 8501150908VR | Essentra Components | SNAP FASTENER D15L15 WHT | 0 | |||
| PRH850-19 | Pop Rivets | DRAW BOLT PIN | 0 | |||
| 3585-01CN110 | HeliCoil | 0 | ||||
| 8501260901VR | Essentra Components | SNAP FASTNR D30FEM.12L26 BLK | 0 | |||
| H8501 | Heyco | HPASC 1/4 NPT-10MM BLK | 0 | |||
| 1185-01CNW146 | HeliCoil | INS H-C 1-64UNC FR CIN23 | 0 | |||
| 1185-01EN110 | HeliCoil | 0 | ||||
| 1185-01CN110 | HeliCoil | 0 | ||||
| 3585-01CN073 | HeliCoil | 0 | ||||
![]() EBV Elektronik | 5962-8978501PA | Broadcom Limited | Optocoupler DCIN 2CH Darlington With Base DCOUT 8Pin CDIP (Alt: 5962-8978501PA) RoHS : Not Compliant | 129 | ||
| QEDM-8501 | Broadcom Limited | Optical ShaftEncoder Components (Alt: QEDM-8501) RoHS : Compliant | 0 | |||
NCV8501D50R2G![]() | onsemi | LDO Regulator 150 mA 45 V 90A IQ with Delay Reset Monitor Flag and Enable 50 V ONSSPCLDO (Alt: NCV8501D50R2G) RoHS : Compliant | 0 | |||
| HCPL-7850#100 | Broadcom Limited | (Alt: HCPL-7850#100) RoHS : Compliant | 0 | |||
| AEDR-8501-102 | Broadcom Limited | Incremental Encoder 3 Channel AEDR850x Series Optical Reflective SMD 1 mm Gated 180 (Alt: AEDR-8501-102) RoHS : Compliant | 0 | |||
| AEDR-8501-100 | Broadcom Limited | (Alt: AEDR-8501-100) RoHS : Compliant | 0 | |||
| 5962-8968501VA | Microchip Technology Inc | SG2823JDESC TRANSISTOR ARRAY DARLINGTON EIGHTGATE (Alt: 5962-8968501VA) RoHS : Not Compliant | 0 | |||
| 5962-89685012A | Microchip Technology Inc | (Alt: 5962-89685012A) RoHS : Not Compliant | 0 | |||
| VSMY385010-GS18 | Vishay Intertechnologies | HIGH SPEED IR SURFEMITDIODE 850nme3 (Alt: VSMY385010-GS18) RoHS : Compliant | 0 | |||
| 5962-9958501QXC | Microchip Technology Inc | FPGA 54K Gates 1184 Cells 79MHz131MHz 045um CMOS Technology 33V5V 256Pin CQFP (Alt: 5962-9958501QXC) RoHS : Not Compliant | 0 | |||
| VSMY385010-GS08 | Vishay Intertechnologies | HIGH SPEED IR SURFEMITDIODE 850nme3 (Alt: VSMY385010-GS08) RoHS : Compliant | 0 | |||
LPC11E37FBD48/501E![]() | NXP Semiconductors | ARM MCU LPC Family LPC1100 Series Microcontrollers ARM CortexM0 32 bit 50 MHz 128 KB 48 Pins (Alt: LPC11E37FBD48/501E) RoHS : Compliant | 0 | |||
| LPC11E37FBD48/501Y | NXP Semiconductors | ARM MCU 32bit ARM CortexM0 50 MHz 128 KB 12 KB 48 Pins LQFP (Alt: LPC11E37FBD48/501Y) RoHS : Compliant | 0 | |||
| LPC11U35FET48/501,151 | NXP Semiconductors | (Alt: LPC11U35FET48/501,) RoHS : Compliant | 0 | |||
| FJ8071505258501S RMLU | Intel Corporation | Intel Processor U300 8M Cache up to 440 GHz FCBGA16F Tray (Alt: 99C87D) RoHS : Compliant | 0 | |||
![]() Flip Electronics | TVS8501V5MUT5G | onsemi | Stock RoHS : Compliant | 2,668,923 | ||
| ESD8501V5MUT5G | onsemi | Stock, Ship Today RoHS : Compliant | 2,668,923 | |||
| TVS8501V6MUT5G | onsemi | Stock, Ship Today RoHS : Compliant | 120,000 | |||
NCV8501DADJR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 38,861 | |||
NCV8501D80R2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 23,841 | |||
| FGY160T65SPD-F085-01 | onsemi | Stock, Ship Today | 3,300 | |||
| LPC11E37FBD48/501Y | NXP Semiconductors | Stock RoHS : Compliant | 2,276 | |||
| ECH8501-TL-H | onsemi | Stock, Ship Today RoHS : Compliant | 2,130 | |||
LPC11E37FBD48/501E![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,250 | |||
| FGY120T65SPD-F085-01 | onsemi | Stock, Ship Today | 420 | |||
| BLF6G38-50,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 111 | |||
| LPC11U35FET48/501, | NXP Semiconductors | Stock, Ship Today | 70 | |||
![]() Master Electronics | 8501 | HH Smith | Aluminum Round Spacer - #6 ID - 1/4 OD - 1/4 Length. RoHS : Compliant |
| 201 | |
| 8501 | General Tools & Instruments LLC | RoHS : Compliant |
| 1 | ||
| 095-850-185-018 | Amphenol RF | HD-BNC Straight Plug to HD-BNC Straight Plug on RG-316 50 Ohm 18 inches RoHS : Compliant |
| 0 | ||
| 095-850-185-012 | Amphenol RF | HD-BNC Straight Plug to HD-BNC Straight Plug on RG-316 50 Ohm 12 inches RoHS : Compliant |
| 0 | ||
| TW-08-12-L-D-850-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-10-12-L-D-850-110 | Samtec Inc | Stacking Board Connector TW Series 20 Contacts Header 2 mm Through Hole 2 Rows RoHS : Compliant |
| 0 | ||
| TW-12-12-G-S-850-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-15-04-F-D-285-015 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-16-12-T-D-850-110 | Samtec Inc | Stacking Board Connector TW Series 32 Contacts Header 2 mm Through Hole 2 Rows RoHS : Compliant |
| 0 | ||
| T850135 | Teledyne FLIR | THERMAL STUDIO PRO 1Y 15 A RoHS : Compliant |
| 0 | ||
| 095-850-130M025 | Amphenol RF | HD-BNC Straight Plug to BNC Straight Plug on Belden 1855A 0.25 Meters RoHS : Compliant |
| 0 | ||
| 095-850-160L050 | Amphenol RF | HD-BNC Straight Plug to HD-BNC Straight Plug on Belden 1694A 600 inches RoHS : Compliant |
| 0 | ||
| 095-850-162M075 | Amphenol RF | HD-BNC Straight Plug to BNC Straight Plug on Belden 1505A 0.75 Meters RoHS : Compliant |
| 0 | ||
| 095-850-162M200 | Amphenol RF | HD-BNC Straight Plug to BNC Straight Plug on Belden 1505A 2.00 Meters RoHS : Compliant |
| 0 | ||
| 095-850-188-006 | Amphenol RF | HD-BNC Straight Plug to HD-BNC Straight Plug on Belden 4855R 12G Optimized 6 inches RoHS : Compliant |
| 0 | ||
![]() Neutron USA | HD4850-10 | Crydom Inc | Relay, 50 A (Max.), 48 to 530 V (RMS), SPST NO, 1200 V, 10 mA (Max.), Panel RoHS : Compliant |
| 50 | |
| CWD4850-10 | Crydom Inc | Solid-State Relay, Load: 50 A 48-660 VAC, Control: 4-32VDC, Screw, Panel Mount RoHS : Compliant |
| 50 | ||
| OPB850-1Z | TT Electronics OPTEK Technology | Optical Sensor Optical Flag Transistor, Base-Emitter Resistor Module, Pre-Wired RoHS : Compliant |
| 50 | ||
| 085.01001.00 | Astrodyne TDI Power Supplies & EMI Filters | AC Power Entry Modules PWR ENT MOD RCPT C14 PNL 10A S |
| 50 | ||
| 4785.0100 | Schurter Electronic Components | AC Power Entry Modules 4785 APP OUTLET FOR CABLE 10A 70 deg RoHS : Compliant |
| 50 | ||
| 4850.1610 | Schurter Electronic Components | Circular DIN Connectors DIN PLUG 6 POLE RoHS : Compliant |
| 50 | ||
| 59085-010 | Littelfuse Inc | Proximity Sensors PROX SEN VANE SPST-NO W/WIRE RoHS : Compliant |
| 50 | ||
| 8501KPR12V20 | Square D by Schneider Electric | Power Relay, 8 Pin Plug-In, 10A at 240V 120 VAC, 8501C Series |
| 50 | ||
| 8501KPR13V20 | Square D by Schneider Electric | Power Relay,11 Pin,Octal,120 VAC,3PDT,Socket Mount,6.6A,240 VAC,8501K Series |
| 17 | ||
| 8501KUR12V20 | Square D by Schneider Electric | Power Relay,8 Pin,120 VAC,DPDT,Socket Mount,12A,240 VAC,QC Tabs,8501K Series |
| 17 | ||
| PA-850-102V-NG2 | Nidec Corporation | Snsr w/amp 0~-100kPa; vac; 1~5V; crrsv gases/liquids; NPN G1/4 w/M5 female scre |
| 2 | ||
| P585-010 | Eaton Corporation | 10FT MINI DISPLAYPORT EXTENSION CABLE 4KX2K 60HZ HDCP 2.2 M/F |
| 1 | ||
| 8501KUR13V20 | Square D by Schneider Electric | Power Relay,11 Pin,120 VAC,3PDT,Socket Mount,6.6A,240 VAC,QC Tabs,8501K Series |
| 1 | ||
| 4785.0100, 4785.01 | Schurter Electronic Components | IEC Angled Socket, 10 A/250 VAC, 14 AWG, Screw Terminal, 4785 Series |
| 0 | ||
| PA-850-102R-NR2 | Nidec Corporation | Pressure Sensor, -100 ~ 100 kPa G compound, 1 ~ 5Vout, NPN open collector, IP65, corrosive G/L, 0.06% F.S./Celsius thermal error, R1/4 w/M5 F Port, cable lead |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10850-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-18 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-18 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-18 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 4 | |
| PE3C8501-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-100CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-100CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3W08501 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Male Cable Using LMR-100 Coax. PE3W08501 is a BNC female bulkhead to BNC male cable using LMR-100A coax. This Pasternack BNC female bulkhead to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08501 BNC female bulkhead to BNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C8501-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 150 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-150CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-150CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3W18501 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213HV, RF Cable Type: RG213 Hi Voltage, RF Cable Impedance: 50 Ohm. SHV Plug to N Female 4 Hole Flange Cable Using RG213HV Coax. PE3W18501 is a SHV plug to N female 4 hole flange cable using RG213 Hi Voltage coax. This Pasternack SHV plug to N female 4 hole flange cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm N for connector 2. Our plug SHV to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18501 SHV plug to N female 4 hole flange cable assembly is constructed with RG213 Hi Voltage coax. | 0 | |||
| PE3C8501-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-12, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C7850-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C7850-100CM, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C7850-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7850-100CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8501-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 50 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-50CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-50CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 36 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-36, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-36 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-24, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-24 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C4850-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack 2 Hole Flange Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack 2 hole flange cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack 2 hole flange cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA 2 hole flange cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4850-12, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4850-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA plug bulkhead to BMA jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4850-12 can also be used in the other direction and will be BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack 2 hole flange cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C8501-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 48 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 48 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-48, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-48 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-48 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 0 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts. | 0 | |||
| PE3C8501-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 200 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-200CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-200CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C7850-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C7850-150CM, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C7850-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7850-150CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
![]() TE Connectivity | 5-146850-1 | TE Connectivity | B/A REELED SRST HDR ASSY, SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-146850-1 | Internal Number: 5-146850-1 | TE Connectivity RoHS : Compliant |
| 72,650 | |
| 63850-1 | TE Connectivity | 187 FASTON REC 20-16 AWG NPST Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 63850-1 | Internal Number: 63850-1 | TE Connectivity RoHS : Compliant |
| 54,188 | ||
| 60850-1 | TE Connectivity | 187 FASTON TAB 18-14 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 60850-1 | Internal Number: 60850-1 | TE Connectivity RoHS : Compliant |
| 963 | ||
85-015A-8R![]() | TE Connectivity | 15 PSIA 1/8 - 27 NPT PRESSURE SENSOR Pressure: 15 psi Pressure Sensor Type: mV Output Pressure Sensors Pressure Type: Absolute Output Signal Details: 100mV Operating Temperature Range: -40 – 125 °C 13Mm Mv Output Pressure Sensor | 15 psi mV Output Pressure Sensors | Part Number: 85-015A-8R | Internal Number: 85-015A-8R | TE Connectivity RoHS : Compliant |
| 90 | ||
| 85-015G-FC | TE Connectivity | 15 PSIG FLUSH MOUNT PRESSURE SENSOR Pressure: 15 psi Pressure Sensor Type: mV Output Pressure Sensors Pressure Type: Gauge Output Signal Details: 100mV Operating Temperature Range: -40 – 125 °C 13Mm Mv Output Pressure Sensor | 15 psi mV Output Pressure Sensors | Part Number: 85-015G-FC | Internal Number: 85-015G-FC | TE Connectivity RoHS : Compliant |
| 19 | ||
![]() Teledyne HiRel | 5962-9098501BSA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | ||
| 5962-9098501M2A | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501MRA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
5962-9158501MXA![]() | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9158501MZA![]() | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9158501MUA![]() | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9098501MSA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
5962-9158501MYA![]() | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9218501MSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-9098501BRA![]() | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501B2A | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9218501M2A | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218501MRA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Vyrian | 307-008-501-112 | EDAC Inc | Card Edge Connector, 8 Contact(s), 1 Row(s), Female, 0.156 inch Pitch, Solder Terminal, Hole 0.128, Green Insulator RoHS : Compliant | 18,270 | ||
| AZ850-12 | American ZETTLER Inc | Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.009A (Coil), 12VDC (Coil), 81mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount RoHS : Compliant | 14,233 | |||
NCV8501D100R2G![]() | onsemi | Fixed Positive LDO Regulator, 10V, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 12,199 | |||
NCV8501DADJ![]() | onsemi | Adjustable Positive LDO Regulator, 1.242V Min, 1.318V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 11,246 | |||
NCV8501PDW33![]() | onsemi | Fixed Positive LDO Regulator, 3.3V, 0.15V Dropout, BIPolar, PDSO16 RoHS : Not Compliant | 10,147 | |||
5962-8688501JX![]() | Texas Instruments | Registered Bus Transceiver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, CDIP24 | 8,934 | |||
ONET8501PBRGTRG4![]() | Texas Instruments | Telecom Circuit, 1-Func, PQCC16 RoHS : Compliant | 8,561 | |||
| 8418501HX | Texas Instruments | Video Amplifier, 1 Channel(s), 1 Func, Bipolar, CDFP10 | 6,598 | |||
LP38501TS-ADJ![]() | Texas Instruments | Adjustable Positive LDO Regulator, 0.6V Min, 5V Max, 0.665V Dropout, CMOS, PSSO5 | 5,795 | |||
| KTAQ85016 | Kingston Technology Company | 5,391 | ||||
| PD85015-E | STMicroelectronics | RF Power Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 4,786 | |||
| OPB850-1Z | TT Electronics OPTEK Technology | Transistor Output Slotted Switch, 1-Channel RoHS : Compliant | 829 | |||
| CWD4850-10 | Hbcontrols | Trigger Output SSR, 1-Channel, 4000V Isolation | 510 | |||
| 248-501 | WAGO Innovative Connections | Terminal Block Accessory, Marking Item RoHS : Compliant | 459 | |||
| 248-501/000-006 | WAGO Innovative Connections | Terminal Block Accessory RoHS : Compliant | 220 | |||
![]() Waytek, Inc. | 55808501 | Southwire Company LLC | 16/3 SJOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 300V |
| 3,500 | |
![]() Win Source Electronics | LP38501ATJ-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A 5PFM RoHS : Compliant |
| 100,707 | |
| LPC11U35FET48/501 | Nexperia |
| 60,890 | |||
| TVS8501V5MUT5G | onsemi | TVS DIODE 5VWM 11.5VC 2UDFN RoHS : Compliant |
| 48,000 | ||
| 885012206095 | Wurth Elektronik | CAP CER 0.1UF 50V X7R 0603 RoHS : Compliant |
| 28,000 | ||
LP38501TS-ADJ![]() | Texas Instruments | LP38501/3-ADJ, LP38501A/3A-ADJ 3A FlexCap Low Dropout Linear Regulator for 2.7V to 5.5V Inputs |
| 22,307 | ||
LP38501TS-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A TO263-5 RoHS : Compliant |
| 18,190 | ||
LP38501TSX-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A TO263-5 RoHS : Compliant |
| 18,000 | ||
| TPS78501QWDRBRQ1 | Texas Instruments | IC REG LINEAR POS ADJ 1A 8SON / Linear Voltage Regulator IC Positive Adjustable 1 Output 1A 8-SON (3x3) RoHS : Compliant |
| 17,090 | ||
ONET8501VRGPT![]() | Texas Instruments | IC LASR DRVR 11.3GBPS 3.6V 20QFN RoHS : Compliant |
| 8,490 | ||
ONET8501VRGPR![]() | Texas Instruments | 11.3 Gbps Differential VCSEL Driver RoHS : Compliant |
| 8,310 | ||
| AXK850145WG | Panasonic Electronic Components | Conn Board to Board PL 50 POS 0.4mm Solder ST SMD T/R / CONN HEADER BRD-BRD .4MM 50POS RoHS : Compliant |
| 6,064 | ||
| TPS78501BQWDRBRQ1 | Texas Instruments | AUTOMOTIVE, 1-A, HIGH-ACCURACY, / Linear Voltage Regulator IC Positive Adjustable 1 Output 1A 8-SON (3x3) RoHS : Compliant |
| 6,000 | ||
ONET8501PRGTT![]() | Texas Instruments | IC OPAMP LIMITING 12GHZ 16QFN RoHS : Compliant |
| 2,810 | ||
ONET8501PRGTR![]() | Texas Instruments | IC LIMITING 1 CIRCUIT 16VQFN RoHS : Compliant |
| 2,779 | ||
NCV8501DADJR2G![]() | onsemi | IC REG LDO ADJ 0.15A 8SOIC RoHS : Compliant |
| 1,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |