 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
887PVC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Ameya Holding Limited | MAX887HESA+ | Analog Devices Inc | IC: PMIC; DC/DC converter; Uin: 3.5÷11VDC; Uout: 1.25÷10VDC; 0.6A RoHS : Compliant | 51,120 | ||
| MCR01SMQPF8873 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） |
| 40,000 | ||
| MAX8878EUK36+T | Analog Devices Inc | IC REG LINEAR 3.6V 150MA SOT23-5 RoHS : Compliant | 27,500 | |||
| MAX8887EZK33+T | Analog Devices Inc | MAX8887 Series 3.3 V 300 mA Fixed Low-Dropout Linear Regulator - TSOT-23-5 RoHS : Compliant | 27,499 | |||
| 8872 | Keystone Electronics Corp | BRD SPT SNAP LOCK NYLON 1/4" | 24,936 | |||
| MAX8877EUK25+T | Analog Devices Inc | IC REG LDO 2.5V 0.15A SOT23-5 RoHS : Compliant | 19,975 | |||
| MAX8875EUK30+T | Analog Devices Inc | IC REG LDO 3V 0.15A SOT23-5 RoHS : Compliant | 17,499 | |||
ESR18EZPF8870 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
| KTR18EZPF8870 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 15,000 | ||
| MAX8877EUK28+T | Analog Devices Inc | IC REG LDO 2.8V 0.15A SOT23-5 RoHS : Compliant | 12,500 | |||
| MAX8887EZK29+T | Analog Devices Inc | IC REG LDO 2.9V 0.3A TSOT23-5 RoHS : Compliant | 12,500 | |||
| DS12C887A+ | Analog Devices Inc | DS12C887 Series 5.5V Parallel Through Hole Real Time Clock - DIP-24 RoHS : Compliant | 10,682 | |||
DRV8873SPWPRQ1 | Texas Instruments | RoHS : Compliant | 2,600 | |||
| MAX8878EUK33+T | Analog Devices Inc | IC REG LDO 3.3V 0.15A SOT23-5 RoHS : Compliant | 2,388 | |||
| MCR10PZPZF8871 | ROHM Semiconductor |
| 400 | |||
 ComSIT USA | FDS8870 | onsemi | AVAILABLE EU RoHS : Compliant | 1,595 | ||
| MC33887APVWR2 | NXP Semiconductors | AVAILABLE EU | 1,487 | |||
| LTR18EZPF8870 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 2,778,750 | |||
DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,324 | |||
| DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,853 | |||
 Interstate Connecting Components | 887 | Keystone Electronics Corp | CLEAR HOLE SPACER NYLON |
| 349 | |
| M28876/10CB | Amphenol Fiber Systems International | PROTECTIVE COVER, PLUG, CHAIN - RING |
| 27 | ||
| M28876/11F2P2N | Amphenol Fiber Systems International | FIBER JN RCPT 18 CHNL MIL |
| 12 | ||
| M28876/11C1S5 | Amphenol Fiber Systems International | FIBER OPTIC JAM NUT RECEPTACLE, J23 |
| 11 | ||
| 2488710-1 | TE Connectivity | CONN G SNA 1.6MM D-SUB 15 PIN RoHS : Compliant | 0 | |||
| 2488747-1 | TE Connectivity | O-RING SNA 38999 SHELL 8 1PK RoHS : Compliant | 0 | |||
| 1-178288-7 | TE Connectivity | DYNAMIC D3100S REC HSG 8P X RoHS : Compliant |
| 0 | ||
| 5175887-4 | TE Connectivity | CHAMP 050-2 REC ASSY V 26 RoHS : Compliant |
| 0 | ||
| 5787887-1 | TE Connectivity | 200 50SR CMP LP VERT PLUG,DOCK RoHS : Compliant |
| 0 | ||
| 588781-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCD-609-08CS1004 | 0 | |||
| R-10188-7 | TE Connectivity | RTD,AVG,P100,385,.5%,.25D | 0 | |||
| C10-737887-073 | Amphenol Industrial Operations | BARREL FOR 70MM^2 CABLE SURLOK PLUS | 0 | |||
| M28876/10CB | Glenair Inc | 28876 PLUG DUSTCAP SZ 15 Chain w/ ring |
| 0 | ||
| M28876/11C1S5 | Glenair Inc | 28876 J/N RECP 8C SKT |
| 0 | ||
| M28876/12B12P4 | Amphenol Fiber Systems International | FIBER JN RCPT 4 CHNL MIL WITH STRT BKSHL |
| 0 | ||
 PUI | 12.88743 | 81,106 | ||||
| 12.88772 | 56,953 | |||||
| 12.88779 | 56,953 | |||||
| 12.88731 | 53,119 | |||||
| 12.88767 | 40,146 | |||||
| 12.88727 | 30,854 | |||||
| 12.88784 | 7,264 | |||||
| 12.88768 | 5,370 | |||||
| 12.88702 | 3,010 | |||||
| 12.88730 | 3,000 | |||||
| 12.88769 | 1,020 | |||||
| 12.88774 | 1,000 | |||||
| 12.88742 | 300 | |||||
| 12.88732 | 40 | |||||
| 12.88753 | 19 | |||||
 Avnet Silica | NCV887103D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887103D1R2G) RoHS : Compliant | 5,000 | ||
| AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | |||
| AH1887-ZG-7 | Diodes Incorporated | Hall Effect Switch Unipolar 35 G 20 G 165 V to 33 V 5 Pins SOT553 (Alt: AH1887-ZG-7) RoHS : Compliant | 3,000 | |||
NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 2,500 | |||
PIC16F887-I/PT | Microchip Technology Inc | 8bit MCU PIC 20 MHz 14 KB 368 B 44 Pins TQFP (Alt: PIC16F887-I/PT) RoHS : Compliant | 960 | |||
| KSZ8873RLL | Microchip Technology Inc | (Alt: KSZ8873RLL) RoHS : Compliant | 480 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 480 | |||
| PIC16F887-E/PT | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F887-E/PT) RoHS : Compliant | 160 | |||
PIC16F18877-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 56KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18877-I/PT) RoHS : Compliant | 160 | |||
| KSZ8873MLLI-TR | Microchip Technology Inc | (Alt: KSZ8873MLLI-TR) RoHS : Compliant | 0 | |||
| LAN8872T-I/PUA | Microchip Technology Inc | Ethernet Transceiver 33V48 Pins VQFN IEEE 15882019 8021AS2020 1000BASET1 (Alt: LAN8872T-I/PUA) RoHS : Compliant | 0 | |||
| LAN8871T-I/PUA | Microchip Technology Inc | Ethernet Transceiver 33V48 Pins VQFN IEEE 15882019 8021AS2020 1000BASET1 (Alt: LAN8871T-I/PUA) RoHS : Compliant | 0 | |||
| KSZ8873MLL-EVAL | Microchip Technology Inc | MCCKSZ8873MLLEVAL (Alt: KSZ8873MLL-EVAL) RoHS : Compliant | 0 | |||
| MPQ8887GVE-0000-AEC1-Z | Monolithic Power Systems | QFN24 65V 9A HighEfficiency Buck Converter with I2C Interface Configurable Frequency (Alt: MPQ8887GVE-0000-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ8875AGVE-0000-AEC1-Z | Monolithic Power Systems | DCDC Switching Synchronous BuckBoost Regulator Adjustable 2236V in 05 V30 V2 A out QFN34 (Alt: MPQ8875AGVE-0000-AEC1-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | 603-38.88-7 | Abracon Corporation | RoHS : Compliant |
| 0 | |
AX7DAF1-688.7300T | Abracon Corporation | XTAL OSC XO 688.7300MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| MP18871-A4CGSE-Z | Monolithic Power Systems | isolated half-bridge gate driver solution with up to a 0.5A or 4A source and sink peak RoHS : Compliant |
| 0 | ||
| TMJG4887GENL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Down, 10 pin, THT, 3Wire+T, Shielded EMI Finger, LED, Industrial |
| 0 | ||
| WK8887AA1 | RAMXEED | WLAN BT Module |
| 0 | ||
| 33-3887-15-0300 | Calian |
| 0 | |||
| 33-3887-00-0146 | Calian | GPS L1/L2 / GAL E1/E5b / BDS B1/B2b / GLN G1/G2 |
| 0 | ||
| 33-3887-00-1000 | Calian | GPS L1/L2+GLONASS G1/G2 + Galileo E1 + BeiDou B1/B2 |
| 0 | ||
 ECCO | C10-737887-053 | Amphenol Industrial Operations |
| 19 | ||
 Maritex | 1-178288-7 | TE Connectivity | Terminal Housings; 1-178288-7; TE CONNECTIVITY; 8; Female; 8; Black RoHS : Compliant |
| 9,430 | |
DRV8872DDAR | Texas Instruments | Motor Drivers; DRV8872DDAR; TEXAS INSTRUMENTS; 8; 6.5 V; 1.7 mm; 45 V RoHS : Compliant |
| 2,607 | ||
| DS12C887+ | Analog Devices Inc | Real-Time Clocks (RTC ICs); DS12C887+; ANALOG DEVICES; HH:MM:SS (12/24 hr); Through Hole; 5.5 V; 4.5 V RoHS : Compliant |
| 895 | ||
DRV8876PWPR | Texas Instruments | Motor Drivers; DRV8876PWPR; TEXAS INSTRUMENTS; 16; 4.5 V; 37 V; 3.5 A RoHS : Compliant |
| 770 | ||
| NCV887100D1R2G | onsemi | DC DC Converters; NCV887100D1R2G; ON SEMICONDUCTOR; 8; Boost; 1.5 mm; 1 RoHS : Compliant |
| 666 | ||
| FA10887_TINA-RS | LEDIL | Lens for LED high power; angle: 10 to 15 degrees FWHM; Number of LEDs: 1; Dimensions: round 16mm; Height: 9.7mm; meterial: PMMA; PC; Fastening: tape |
| 349 | ||
| PIC16F18876T-I/MV | Microchip Technology Inc | Microcontrollers (MCU); PIC16F18876T-I/MV; MICROCHIP TECHNOLOGY RoHS : Compliant |
| 200 | ||
| PIC16F887-I/PT | Microchip Technology Inc | Microcontrollers (MCU); PIC16F887-I/PT; MICROCHIP TECHNOLOGY; 368 B; FLASH; 35; 5.5 V RoHS : Compliant |
| 100 | ||
BQ25887RGER | Texas Instruments | Battery Management ICs; BQ25887RGER; TEXAS INSTRUMENTS; 24; 1 mm; 4 mm; 4 mm RoHS : Compliant |
| 89 | ||
| 5788792-1 | TE Connectivity | D-Sub Connectors; 5788792-1; TE CONNECTIVITY; D-Sub; Yes; Right Angle; 30.81 mm RoHS : Compliant |
| 26 | ||
DRV8870DDAR | Texas Instruments | Motor Drivers; DRV8870DDAR; TEXAS INSTRUMENTS; 8; 6.5 V; 45 V; 2 A RoHS : Compliant |
| 16 | ||
| MC33887APVW | NXP Semiconductors | Motor Drivers; MC33887APVW; NXP SEMICONDUCTORS; 28 V; 5 V; 5 A; 20 RoHS : Compliant |
| 9 | ||
| MC33887APVWR2 | NXP Semiconductors | Motor Drivers; MC33887APVWR2; NXP SEMICONDUCTORS; 28 V; 5 V; 5 A; 20 |
| 7 | ||
AD7887ARMZ-REEL7 | Analog Devices Inc | Analog-to-Digital Converters (ADC); AD7887ARMZ-REEL7; ANALOG DEVICES; 8; SPI; 5.25 V; 2.7 V RoHS : Compliant |
| 4 | ||
| DRV8876RGTR | Texas Instruments | Motor Drivers; DRV8876RGTR; TEXAS INSTRUMENTS; 16; 4.5 V; 37 V; 3.5 A RoHS : Compliant |
| 1 | ||
 Master Electronics | 1-178288-7 | TE Connectivity | DYNAMIC D3100S REC HSG 8P X RoHS : Compliant |
| 4,058 | |
| 1707788-7 | TE Connectivity | ANVIL RoHS : Compliant |
| 0 | ||
| 1788741 | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - number of positions: 3 - pitch: 3.5 mm - color: black - contact surface: Tin - mounting: THR soldering - pin layout: Linear pinning - solder pin [P]: 2 mm RoHS : Compliant |
| 0 | ||
| 1614887-4 | TE Connectivity | Thin Film Resistor - SMD 0805 - 374 ohm (+/-) 0.1% - 1/10 W - 100V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| 1417887 | Phoenix Contact | Sensor/actuator cable - 3-position - PVC - yellow - shielded - Plug straight M12 SPEEDCON - A-coded - on Socket straight M12 SPEEDCON - A-coded - cable length: 10 m RoHS : Compliant |
| 0 | ||
| 2488710-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 2488747-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1858879 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 630 V - nominal cross section: 2.5 mm² - number of positions: 2 - pitch: 7.62 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 18879012F | OMRON Industrial Automation | UNKNOWN RoHS : Compliant |
| 0 | ||
| 1088711 | Phoenix Contact | IPD PL CAP W32 WP GY RoHS : Compliant |
| 0 | ||
| 0828873 | Phoenix Contact | Plastic label - Card - yellow - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - lettering field size: 15 x 5 mm - Number of individual labels: 189 RoHS : Compliant |
| 0 | ||
| 095-9088-7161 | TE Connectivity | 095-9088-7161 equal MCEMX-128S RoHS : Not Compliant |
| 0 | ||
| 096511-0887 | ITT Interconnect Solutions | Connector |Itt Cannon 096511-0887 RoHS : Compliant |
| 0 | ||
| 2988719 | Phoenix Contact | Runtime license for Visu+ where the I/O data and variables in scripting are limited to 256 bytes. 2 direct driver connections are also supported. RoHS : Compliant |
| 0 | ||
| 2988764 | Phoenix Contact | Runtime license for Visu+ where the I/O data and variables in scripting are limited to 2048 bytes. 2 direct driver connections are also supported. RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8875/RD | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/RD, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/RD is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-RD coax. | 255 | ||
| PE3C8873/VL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/VL, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/VL is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1855A-VL coax. | 220 | |||
| PE4887 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: MCX, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Interface Type 1: RG174, Interface Type 2: RG316, Interface Type 3: RG188, Interface Type 4: LMR-100, Interface Type 5: PE-B100, Interface Type 6: PE-C100, Interface Type 7: .100 inch. MCX Jack Bulkhead Mount Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0.100 inch, .177 inch D Hole. PE4887 MCX jack bulkhead coaxial connector has an interface type of RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch and a 50 Ohm impedance. Pasternack MCX jack bulkhead connector uses shield/contact crimp/solder as an attachment method. The Pasternack MCX jack bulkhead coaxial connector has a PTFE dielectric type. The Pasternack MCX coaxial connector has a brass body with gold plating. Our PE4887 MCX connector uses beryllium copper contact. This MCX jack bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack jack MCX bulkhead connector will ship the same day as purchased. Our bulkhead MCX jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MCX connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave. |
| 168 | ||
| PE3C8874/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8875/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/RD-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/RD-36 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-RD coax. |
| 51 | ||
| PE3C8874/OR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-OR, RF Cable Type: Belden 1855A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/OR-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/OR-300 is built with Belden 1855A-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/OR-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-OR coax. |
| 47 | ||
| PE3C8873/BR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/BR-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/BR-72 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax. |
| 44 | ||
| PE3C8873/VL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-VL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/VL-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/VL-300 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-VL coax. |
| 44 | ||
| PE3C8873/BR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/BR-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/BR-300 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BR coax. |
| 44 | ||
| PE3C8873/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GY-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 44 | ||
| PE3W10887-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum 2.2-5 Male to QMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10887-24 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10887-24 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to QMA male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to QMA plug cable assembly PE3W10887-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10887-24 can also be used in the other direction and will be a QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to QMA low PIM RF cable assembly as per your requirements. |
| 35 | ||
| PE3C2887/HS2-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female Right Angle to SMA Male Cable 12 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 12 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 12 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-12, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-12 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-12 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 12 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
| PE3W18879/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-240 Coax with HeatShrink. PE3W18879/HS is a BNC male to SMA male cable using LMR-240 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18879/HS BNC male to SMA male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18875 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10KV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 10KV Female Bulkhead to 10KV Male Cable Using RG58 Coax. PE3W18875 is a 10KV female bulkhead to 10KV male cable using RG58 coax. This Pasternack 10KV female bulkhead to 10KV male cable assembly uses a 50 Ohm 10KV for connector 1 and a 50 Ohm 10KV for connector 2. Our female 10KV bulkhead to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18875 10KV female bulkhead to 10KV male cable assembly is constructed with RG58 coax. | 0 | |||
 Teledyne HiRel | 5962-8872603LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
| 5962-8871303XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8872403LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
5962-88726063A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8872610LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873501LA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 45 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88726033A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8871302SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
5962-8875601BFA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-8871303SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-88726013A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88703012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-88735033C | Teledyne HiRel | PROM OTP 2K X 8 REGISTERED 35 NS | 0 | |||
5962-8873502KA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8871302RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | MELFC0102-UE-8871CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;8.87K;�0.25% RoHS : Compliant | 0 | ||
| MELFC0102-UZ-8871DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;8.87K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-YC-8870FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�50PPM;887R;�1% RoHS : Compliant | 0 | |||
| MELFC0102-YE-8870BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;887R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-YZ-8870CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;887R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-TP-8872CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;88.7K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-8874FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;8.87M;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZK-8870FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�100PPM;887R;�1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-8870BT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;887R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-8872CT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;88.7K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-8870CT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;887R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-8870DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;887R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-8871DT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;8.87K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-E-8873AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;25PPM;887K ;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-8870AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;887R;�0.05% RoHS : Compliant | 0 | |||
 Vyrian | MPQ8875AGVE-0000-AEC1-Z | Monolithic Power Systems | Switching Regulator, 5A, 1000kHz Switching Freq-Max RoHS : Compliant | 13,328 | ||
| 1788741 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 13,293 | |||
| 1738872 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 2 Row(s), 1 Deck(s) RoHS : Compliant | 13,172 | |||
| LTM2887CY-3I#PB | Analog Devices Inc | Interface Circuit RoHS : Not Compliant | 12,270 | |||
| 1858879 | Phoenix Contact | Modular Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,155 | |||
| MAX4887ETE+ | Analog Devices Inc | Audio/Video Switch, 1 Func, 1 Channel, BICMOS RoHS : Compliant | 10,232 | |||
| LM675T-SL108878 | Texas Instruments | 9,135 | ||||
| LTC3887EUJ-2#WTRPBF | Analog Devices Inc | Switching Controller, Current-mode, CMOS, PQCC40 RoHS : Compliant | 7,904 | |||
| 2810887 | Phoenix Contact | Signal Interfaces RoHS : Compliant | 7,495 | |||
| 2988719 | Phoenix Contact | Development Software | 7,091 | |||
| 1887086 | Phoenix Contact | Connector Accessory, Cover Item, Plastic RoHS : Compliant | 6,252 | |||
| MAX8873RC/D | Analog Devices Inc | 6,207 | ||||
2SB887 | onsemi | Power Bipolar Transistor, 10A I(C), 100V V(BR)CEO, 1-Element, PNP, Silicon, TO-218, Plastic/Epoxy, 3 Pin RoHS : Compliant | 4,011 | |||
MSP430FR5887IPM | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,132 | |||
MAX6887EETE | Maxim Integrated Products | Power Supply Management Circuit, Adjustable, 6 Channel, BICMOS RoHS : Not Compliant | 222 | |||
 Waytek, Inc. | 7100163887 | 3M | 22-18GA Female Disconnect Red Nylon .250 X .032 Fully Insulated |
| 147,702 | |
| 131887-91 | General Cable Technologies Corporation | 16GA GXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 120,000 | ||
 Win Source Electronics | NCV887100D1R2G | onsemi | IC REG CTRLR BOOST/FLYBACK 8SOIC RoHS : Compliant |
| 20,000 | |
DRV8871DDA | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD / Unipolar Motor Driver NMOS PWM 8-SO PowerPad RoHS : Compliant |
| 15,000 | ||
| DRV8871DDAR | Texas Instruments | Brushed DC Motor Driver With Internal Current Sense (PWM Control) RoHS : Compliant |
| 14,060 | ||
| DRV8873SPWPRQ1 | Texas Instruments | IC MTRDRV UNIPLR 0-5.5V 24HTSSOP / Unipolar Motor Driver NMOS SPI 24-HTSSOP RoHS : Compliant |
| 12,490 | ||
| PIC16F18877-I/PT | Microchip Technology Inc | RoHS : Compliant |
| 12,000 | ||
| DRV8876RGTR | Texas Instruments | IC MOTOR DRIVER DC 5.5V 16VQFN / Unipolar Motor Driver NMOS PWM 16-VQFN (3x3) RoHS : Compliant |
| 11,520 | ||
MAX8887EZK33 | Maxim Integrated Products | Low-Dropout, 300mA Linear Regulators in SOT23 RoHS : Not Compliant |
| 10,702 | ||
DRV8871DDARQ1 | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD / Unipolar Motor Driver NMOS PWM 8-SO PowerPad RoHS : Compliant |
| 10,000 | ||
| PIC16F18875T-I/PT | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 44TQFP RoHS : Compliant |
| 9,599 | ||
MAX8887EZK33-T | Maxim Integrated Products | IC REG LINEAR LDO / Linear Voltage Regulator IC Positive Fixed 1 Output 300mA TSOT-23-5 RoHS : Not Compliant |
| 8,339 | ||
| AX88796CLI | ASIX Electronics Corporation | Low-Power SPI or Non-PCI Ethernet Controller RoHS : Compliant |
| 4,271 | ||
| AX88772BLI | ASIX Electronics Corporation | USB 2.0 to 10/100 Ethernet Controller RoHS : Compliant |
| 3,800 | ||
DAC8871SPWR | Texas Instruments | IC DAC 16BIT V-OUT 16TSSOP RoHS : Compliant |
| 1,860 | ||
| KSZ8873MLLI-TR | Microchip Technology Inc | CTLR 3-PORT 10/100 SWITCH W/ 1X / Ethernet Switch IEEE 802.3, 10/100 Base-T/TX PHY I²C, SPI Interface 64-LQFP (10x10) RoHS : Compliant |
| 1,820 | ||
| BCM88775A1KFSBG | Broadcom Limited | 144 SERDES SINGLE STAGE |
| 100 | ||
 Wuhan P&S | FDD8874 | onsemi | N-Ch PowerTrench MOSFET 30V,116A,5.1m�� RoHS : Compliant |
| 350,000 | |
| NCV887740D1R2G | onsemi | Automotive Grade Start-Stop Non-Synchronous Boost Controller RoHS : Compliant |
| 2,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand