 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
88XP-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | FIX-8.8X760-ST/BK | Fix&Fasten | Cable tie; L: 760mm; W: 8.8mm; black; polyamide; 980N; Ømax: 225mm |
| 4,000 | |
| 2188X30 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 30mm; UL94V-2; polyamide |
| 1,769 | ||
| 188X65 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; L: 65mm; black |
| 923 | ||
| 288X55 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; M5; L: 55mm; black |
| 840 | ||
| 188X20 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; L: 20mm; black |
| 421 | ||
| 188X15 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; L: 15mm; black |
| 330 | ||
| 288X18 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; M5; L: 18mm; black |
| 300 | ||
| 1188X35 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 35mm; UL94V-2; polyamide |
| 210 | ||
| 2188X18 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 18mm; UL94V-2; polyamide |
| 12 | ||
| 188X55 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; L: 55mm; black |
| 10 | ||
| 1188X65 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 65mm; UL94V-2; polyamide |
| 0 | ||
| 2188X22 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 22mm; UL94V-2; polyamide |
| 0 | ||
| 188X60 | Dremec DE | Screwed spacer sleeve; hexagonal; polyamide; M5; L: 60mm; black |
| 0 | ||
| 1188X40 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 40mm; UL94V-2; polyamide |
| 0 | ||
| 2188X65 | Dremec DE | Insulating sleeve; Int.thread: M5; L: 65mm; UL94V-2; polyamide |
| 0 | ||
 Avnet Americas | XR3088XIDTR-F | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.5 V to 5.5 V, 8 Pins, NSOIC - Tape and Reel (Alt: XR3088XIDTR-F) RoHS : Compliant |
| 2,500 | |
| 88X3310-A1-BUS4I000 | Marvell Technology Group Ltd | PHY 1-CH/4-CH 1Gbps/100Mbps/10Mbps BGA - Trays (Alt: 88X3310-A1-BUS4I000) RoHS : Compliant | 1,066 | |||
| 88X5123-A1-BVU4C000 | Marvell Technology Group Ltd | PHY 2-CH 100Gbps/40Gbps, 4-CH 50Gbps, 8-CH 25Gbps/10Gbps 256-Pin FCBGA - Trays (Alt: 88X5123-A1-BVU4C000) RoHS : Compliant | 45 | |||
| FAN53526UC288X | onsemi | - Tape and Reel (Alt: FAN53526UC288X) RoHS : Not Compliant |
| 0 | ||
| 88X2140-A1-BIL2C000 | Marvell Technology Group Ltd | - Bulk (Alt: 88X2140-A1-BIL2C000) RoHS : Compliant | 0 | |||
| C788X050YJJ | Panduit Corp | - Labels that come on sheets or rolls (Alt: C788X050YJJ) RoHS : Compliant |
| 0 | ||
| 580EL388X2DAT | CTS Corporation | - Tape and Reel (Alt: 580EL388X2DAT) RoHS : Compliant |
| 0 | ||
| 580EN388X2CTT | CTS Corporation | - Tape and Reel (Alt: 580EN388X2CTT) RoHS : Compliant |
| 0 | ||
| 581EN388X2CAT | CTS Corporation | - Tape and Reel (Alt: 581EN388X2CAT) RoHS : Compliant |
| 0 | ||
| 581EN388X2DTT | CTS Corporation | - Tape and Reel (Alt: 581EN388X2DTT) RoHS : Compliant |
| 0 | ||
| BLF188XRGJ | Flip Electronics | LDMOS POWER TRANSISTOR - Tape and Reel (Alt: BLF188XRGJ) RoHS : Compliant |
| 0 | ||
| FY9WP88X001F110 | Panduit Corp | - Bulk (Alt: FY9WP88X001F110) RoHS : Not Compliant |
| 0 | ||
| FYZAP88X005F360 | Panduit Corp | OM4 144-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM - Bulk (Alt: FYZAP88X005F360) RoHS : Not Compliant |
| 0 | ||
| FAN53526UC288X | onsemi | - Tape and Reel (Alt: FAN53526UC288X) RoHS : Compliant | 0 | |||
| 588L288X2IAT | CTS Corporation | - Tape and Reel (Alt: 588L288X2IAT) RoHS : Compliant | 0 | |||
 Newark | CLC88X2S8TL370 | Panduit Corp | Cable Clip, 22.2Mm Corrugated Loom, 2Pos; |Panduit CLC88X2S8TL370 RoHS : Compliant |
| 240 | |
| CLC88X1S8TL370 | Panduit Corp | Cable Clip, 22.2Mm Corrugated Loom, 1Pos; |Panduit CLC88X1S8TL370 RoHS : Compliant |
| 218 | ||
| MP-CP30288X | SPC Multicomp | Adapter, Hdmi Rcpt-Rcpt, 8K; |Multicomp Pro MP-CP30288X RoHS : Compliant |
| 173 | ||
| 09451812588XL | HARTING Technology Group | Mod Conn, R/A Ix Type A Plug, 8P8C+2 Gnd; Modular Connector Type:Ix Type A Plug; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:-; Ip Rating:Ip20; Connector Mounting:Cable Mount Rohs Compliant: Yes RoHS : Compliant |
| 95 | ||
| CLC88X3S8C370 | Panduit Corp | Cable Clip, 22.2Mm Corrugated Loom, 3Pos; |Panduit CLC88X3S8C370 RoHS : Compliant |
| 71 | ||
| BFW-M12M8-8X | Banner Engineering Corp | Sensor Conn, M12, Plug, 8Pos, Cable; Product Range:Bfw Series; Sensor Connector Size:M12; Sensor Connector Gender:Male; No. Of Positions:8 Positions; Sensor Contact Type:Screw Pin; Sensor Connector Mounting:Cable Mount |Banner Engineering BFW-M12M8-8X RoHS : Not Compliant |
| 14 | ||
| BFW-M12F8-8X | Banner Engineering Corp | Sensor Conn, M12, Rcpt, 8Pos, Cable; Product Range:Bfw Series; Sensor Connector Size:M12; Sensor Connector Gender:Female; No. Of Positions:8 Positions; Sensor Contact Type:Screw Socket; Sensor Connector Mounting:Cable Mount RoHS : Not Compliant |
| 10 | ||
| MCIMX8-8X-BB | NXP Semiconductors | Baseboard, I.mx 8Quadxplus Mek; |NXP Semiconductors MCIMX8-8X-BB RoHS : Compliant |
| 4 | ||
| 788XBXRC1-12D | Schneider Electric | Pwr Relay, Dpdt, 12Vdc, 10A; |Schneider Electric/legacy Relay 788XBXRC1-12D RoHS : Compliant |
| 1 | ||
| 788XCXRM4L-12D | Schneider Electric | Pwr Relay, 3Pdt, 12Vdc, 10A; Available Until Stocks Are Exhausted Alternative Available |Schneider Electric/legacy Relay 788XCXRM4L-12D RoHS : Compliant |
| 1 | ||
| C788X050YJJ | Panduit Corp | Label, 200.2Mm X 12.7Mm, Polyester, Wht; |Panduit C788X050YJJ RoHS : Not Compliant |
| 0 | ||
| PCM 200/88 XT | FIBOX | Lambda Part; |Fibox PCM 200/88 XT RoHS : Compliant |
| 0 | ||
| FAN53526UC288X | onsemi | Step-Down Regulators Sync Rohs Compliant: Yes |Onsemi FAN53526UC288X RoHS : Compliant |
| 0 | ||
| P-RSVRKV40-1188XL-0.2M | TURCK Inc | Cmn; |Turck P-RSVRKV40-1188XL-0.2M RoHS : Not Compliant |
| 0 | ||
| P-RKFV40-1188XL-2/14.5/NPT | TURCK Inc | Rmn; |Turck P-RKFV40-1188XL-2/14.5/NPT RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | DS2488X+T | Analog Devices Inc | 1-Wire Dual-Port Link RoHS : Compliant |
| 628,226 | |
| DS2488X+U | Analog Devices Inc | 1-Wire Dual-Port Link RoHS : Compliant | 0 | |||
 NXP Semiconductors | MCIMX8-8X-BB | NXP Semiconductors | i.MX 8QuadXPlus Multisensory Enablement Kit (MEK) Base Board, RoHS : Compliant |
| 10 | |
 RS | 788XBXRM4L-24D | Schneider Electric | GENERAL PURPOSE RELAY, SE RELAYS, 788R, DPDT, 10A, 24 VDC, QUICK TERMINAL |
| 195 | |
| 88XBXH-12VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, DPDT, 12V DC COIL, 88H SERIES |
| 25 | ||
| 88XCXH-120VAC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, 3PDT, 120V AC COIL, 88H SERIES |
| 25 | ||
| 88XBXHL-12VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, DPDT, 12V DC COIL, W/ LED IND., 88H SERIES |
| 10 | ||
| P-RSV RKV 40-1188XL-2M (U-82153) | TURCK Inc | PROCESS AUTOMATION, CORDSET,7/8-16 MALE TO 7/16 F,4 WIRE, SHIELDED,2M, EX60,BLACK |
| 10 | ||
| 88XCXHL-24VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, 3PDT, 24V DC COIL, W/ LED IND., 88H SERIES |
| 9 | ||
| 788XBXR69C-24D | Schneider Electric | GENERAL PURPOSE RELAY, SE RELAYS, 788R, DPDT, 10A, 24 VDC, QUICK TERMINAL |
| 5 | ||
| 88XCXH-12VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, 3PDT, 12V DC COIL, 88H SERIES |
| 2 | ||
| 88XCXH-115/125VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, 3PDT, 115/125V DC COIL, 88H SERIES |
| 2 | ||
| 88XBXHL-115/125VDC | Struthers-Dunn | HERMETICALLY-SEALED RELAY, DPDT, 115/125V DC COIL, W/ LED IND., 88H SERIES |
| 2 | ||
| 65X88X12TC-BX (0075017781) | Dichtomatik | OIL SEAL, 65MM ID, 88MM OD, 12MM WIDTH, N701R MATERIAL |
| 2 | ||
| UL PCM 200/88 XG (6415330) | FIBOX | PC ENCLOSURE, 7" WIDE X 3.5" DEEP X 10" HIGH, GRAY COVER, UL 508 |
| 2 | ||
| 788XCXRC-24D | Schneider Electric | PLUG-IN ELECTROMECHANICAL RELAY, GENERAL PURPOSE RELAYS, 788 R, 3PDT |
| 1 | ||
| 3RA23288XB301AK6 | Siemens | SIRIUS 3RA 3 POLE CONTACTOR, 38 A, 18.5 KW, 120 V AC COIL |
| 1 | ||
| UL PC 200/88 XHG (6413330) | FIBOX | PC ENCLOSURE, 7" WIDE X 3.5" DEEP X 10" HIGH, GRAY COVER, UL 508 |
| 1 | ||
 Rochester Electronics | FAN53526UC288X | onsemi | 3.0A, 2.4MHz, Digitally Programmable TinyBuck® Regulator RoHS : Compliant |
| 13,340 | |
XC95288XV-10FG256I | AMD Xilinx | Flash PLD, 10ns, 288-Cell, CMOS, PBGA256 RoHS : Not Compliant |
| 525 | ||
| XC95288XV-6FG256C | AMD Xilinx | Flash PLD, 6ns, 288-Cell, CMOS, PBGA256 RoHS : Not Compliant |
| 140 | ||
| XC95288XV-7FG256C | AMD Xilinx | Flash PLD, 7.5ns, 288-Cell, CMOS, PBGA256 RoHS : Not Compliant |
| 615 | ||
R80C188XL20 | Intel Corporation | Microprocessor, 16-Bit, 20MHz, CMOS, CQCC68 RoHS : Compliant |
| 397 | ||
SB80C188XL25 | Intel Corporation | Microprocessor, 16-Bit, 25MHz, CMOS, PQFP80 RoHS : Not Compliant |
| 4,047 | ||
| MAX16088XS44F+ | Maxim Integrated Products | MAX1608 Octal Smbus-To-Parallel I/O Expander |
| 3,370 | ||
| MAX6388XS29D1 | Maxim Integrated Products | MAX6388 Sc70, Single Low-Voltage, Low-Power Microprocessor Reset Circuit ' RoHS : Not Compliant |
| 2,374 | ||
| MAX6388XS29D3 | Maxim Integrated Products | MAX6388 Sc70, Single Low-Voltage, Low-Power Microprocessor Reset Circuit ' RoHS : Not Compliant |
| 1,504 | ||
MAX6388XS29D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.93V, BICMOS, PDSO4 RoHS : Compliant |
| 42,500 | ||
| MAX6388XS31D3+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +3.08V, BICMOS, PDSO4 RoHS : Compliant |
| 1,004 | ||
| MAX6388XS31D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.08V, BICMOS, PDSO4 RoHS : Compliant |
| 42,500 | ||
| MAX6388XS46D3+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +4.63V, BICMOS, PDSO4 RoHS : Compliant |
| 822 | ||
| MAX6388XS46D3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.63V, BICMOS, PDSO4 RoHS : Compliant |
| 37,500 | ||
| MAX6388XS46D3-T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 2 Channel, +4.63V, BICMOS, PDSO4 RoHS : Not Compliant |
| 7,500 | ||
 Sager | 48-8-XX-G-XX-B | Illinois Tool Works | ITW Switches | 0 | ||
| K88X-AD-15P-BR | Kycon Inc | D-Sub Standard Connectors D15M VERT HIPROF FRM W/BRD LCK RoHS : Compliant |
| 0 | ||
| K88X-AD-15S-BRJ30 | Kycon Inc | D-Sub Standard Connectors D15F VERT HIPROF FRM BRD LCK J/S 30 F RoHS : Compliant | 0 | |||
| C788X050YJJ | Panduit Corp | Wire Labels & Markers Laser/Ink Jet Comp Lbl ADH Poly |
| 0 | ||
| FY9WP88X001F110 | Panduit Corp | SINGLEMODE 48-FIBER, HD FLEX INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 110 FT |
| 0 | ||
| FY9WP88X005F053 | Panduit Corp | SINGLEMODE 48-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 53 FT | 0 | |||
| FYXTP88X005M050 | Panduit Corp | OM3 12-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 50 M | 0 | |||
| FYZAP88X005F360 | Panduit Corp | OM4 144-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 360 FT | 0 | |||
| FYZWP88X005F036 | Panduit Corp | OM4 48-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 36 FT | 0 | |||
| AA1-X0-10-488-X21-P | Carling Technologies | Circuit Breakers | 0 | |||
| FY9WP88X005F072 | Panduit Corp | SINGLEMODE 48-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 72 FT | 0 | |||
| FYXTP88X005F085 | Panduit Corp | OM3 12-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 85 FT |
| 0 | ||
| FYZTP88X005F025 | Panduit Corp | OM4 12-FIBER, INDOOR SMALL DIAMETER TRUNK, PLENUM, PANMPO MALE WITH 1 M BREAKOUT TO PANMPO MALE WITH 1 M BREAKOUT, POLARITY A, OPTIMIZED IL, PULLING EYE END A, 25 FT |
| 0 | ||
| KF88X-BC-25S-BRJ | Kycon Inc | D-Sub Standard Connectors D15 FML HI-PROF FMED FE-15 RoHS : Compliant | 0 | |||
| KF88X-CD-37P-BRJ | Kycon Inc | D-Sub Standard Connectors D37 FML HI-PROF FMED FE-W/BSH 30 RoHS : Compliant | 0 | |||
 Ameya Holding Limited | 88X3340-B0-BUT4C000 | Marvell Technology Group Ltd | 11,300 | |||
| 88X3580-A0-DFQ4C000 | Marvell Technology Group Ltd | 2,804 | ||||
| 88X7121MC0-BZM4C000 | Marvell Technology Group Ltd | 2,702 | ||||
XC95288XL-10PQG208I | AMD Xilinx | IC CPLD 288MC 10NS 208PQFP RoHS : Compliant | 1,200 | |||
| 88X5123-A1-BVU4I000-S121 | Marvell Technology Group Ltd | 270 | ||||
| 88X3310PA1-BUS4C000 | Marvell Technology Group Ltd | HFCBGA 168ONE PORT NBASE-T PHY WITH MACSEC AND PTP | 118 | |||
 ComSIT USA | EE80C188XL12 | Intel Corporation | 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSOR Microprocessor, 16-Bit, 12MHz, CMOS, PQCC68 RoHS : Compliant | 16,568 | ||
| EE80C188XL20SF12 | Intel Corporation | MPU 188 PROCESSOR CISC 16-BIT CHMOS 68-PIN PLCC RoHS : Compliant | 7,903 | |||
| XC95288XL7FGG256C | AMD Xilinx | CPLD In System Programmable (min 10K program/erase cycles) 288 Macrocell 3V - 3.6V 256-BGA Tra RoHS : Compliant | 805 | |||
| XC95288XL10TQG144I | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 288-Cell, CMOS, PQFP144 RoHS : Compliant | 377 | |||
| SB80C188XL25 | Intel Corporation | 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSOR Microprocessor, 16-Bit, 25MHz, CMOS, PQFP80 RoHS : Not Compliant | 286 | |||
| XC95288XL10BG256C | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 288-Cell, CMOS, PBGA256 RoHS : Not Compliant | 280 | |||
| SB80C188XL20 | Intel Corporation | 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSOR Microprocessor, 16-Bit, 20MHz, CMOS, PQFP80 RoHS : Not Compliant | 116 | |||
| N80C188XL12 | Intel Corporation | 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSOR Microprocessor, 16-Bit, 12MHz, CMOS, PQCC68 RoHS : Not Compliant | 38 | |||
| XC95288XL10TQ144I | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 288-Cell, CMOS, PQFP144 RoHS : Not Compliant | 20 | |||
| XC95288XL10TQ144C | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 288-Cell, CMOS, PQFP144 RoHS : Not Compliant | 9 | |||
| TN80C188XL20 | Intel Corporation | Microprocessor, 16-Bit, 20MHz, CMOS, PQCC68 RoHS : Not Compliant | 8 | |||
| XC95288XL10TQG144C | AMD Xilinx | Flash PLD, 10ns, 288-Cell, CMOS, PQFP144 RoHS : Compliant | 7 | |||
| N80188XL12 | Intel Corporation | HIGH INTEGRATION 16-BIT MICROPROCESSOR Microprocessor, 16-Bit, 8MHz, CMOS, PQCC68 RoHS : Not Compliant | 5 | |||
A80C188XL12 | Intel Corporation | IC MPU 80C186 16Bit 1 Core 12MHz 68-PGA RoHS : Not Compliant | 2 | |||
| XC95288XL6PQG208C | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 6ns, 288-Cell, CMOS, PQFP208 RoHS : Compliant | 1 | |||
 GLYN GmbH & Co. KG | SI88XXXISO-KIT | Skyworks Solutions Inc | Evaluation Tool - Digital Isolator with integrated | 23 | ||
 Interstate Connecting Components | 507T088XM31E09 | Glenair Inc | EMI/RFI BANDING BACKSHELL TOP ENTRY RoHS : Compliant | 1 | ||
| 507T088XM21B07SB | Glenair Inc | MICRO-D TOP ENTRY B/S SZ 21 RoHS : Compliant | 0 | |||
| 507T088XM31B07 | Glenair Inc | MICRO-D TOP ENTRY B/S SZ 31 RoHS : Compliant | 0 | |||
| A850491088X | Amphenol PCD | M8504910-88X | 0 | |||
| 121007-0888 XA | ITT Interconnect Solutions | CA3108E20A9SX-F183 | 0 | |||
| 507E088XM51H10 | Glenair Inc | EMI/RFI BANDING BACKSHELL END ENTRY RoHS : Compliant | 0 | |||
| 507S088XM09H08 | Glenair Inc | EMI/RFI BANDING BACKSHELL SIDE ENTRY RoHS : Compliant | 0 | |||
| 507T088XM09H08S | Glenair Inc | MICRO-D BACKSHELL LIGHTWEIGHT COMPOSIT RoHS : Compliant | 0 | |||
| 440HS088XO25R06 | Glenair Inc | EMI/RFI SZ25 STRT SLF LOCK B/S COMP | 0 | |||
| 121617-0288 X | ITT Interconnect Solutions | VG95328J8-3APX | 0 | |||
| 507T088XM31H09 | Glenair Inc | EMI/RFI BANDING BACKSHELL TOP ENTRY RoHS : Compliant | 0 | |||
| 507S088XMT09E06SB | Glenair Inc | 83513 BACKSHELL SZ 09 RoHS : Compliant | 0 | |||
| 507T088XM37H09S | Glenair Inc | EMI/RFI BANDING BACKSHELL TOP ENTRY RoHS : Compliant | 0 | |||
| 440HS088XB17 | Glenair Inc | 0 | ||||
| 121577-0488 X | ITT Interconnect Solutions | VG95234M-24-28PXJ | 0 | |||
 NexGen Digital | EE80C188XL20 | Intel Corporation | 311 | |||
XC95288XL-7TQG144I | AMD Xilinx | RoHS : Compliant | 6 | |||
 PEI Genesis | NVNV-N088-X0 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | ||
 PUI | K88X-AD-15S | Kycon Inc | RoHS : Compliant | 4,032 | ||
| FC52-081D4488X41MM | Oupiin | RoHS : Compliant | 1,000 | |||
| FC53-141C4488X203MM | 100 | |||||
| 788XBXRC-24A | 20 | |||||
| 788XBXRM4L-24A | 20 | |||||
| 788XBXRM4L-24D | 12 | |||||
| 788XBXRC1-120A | 12 | |||||
| 788XBXR69C-24D | 11 | |||||
| 788XBXRC-120A | 10 | |||||
| FC52-161C4488X203MM | 10 | |||||
| 788XCXRM4L-24D | 4 | |||||
| 788XBXRC-24D | 3 | |||||
| 788XCXC-24A | 1 | |||||
| 788XCXC-24D | 1 | |||||
 Chip 1 Exchange | XC95288XL-10TQG144C | AMD Xilinx | INSTOCK RoHS : Compliant | 4,823 | ||
| FAN53526UC288X | onsemi | INSTOCK RoHS : Compliant | 2,171 | |||
| EE80C188XL12 | Intel Corporation | INSTOCK RoHS : Compliant | 850 | |||
| C0050-88XANX10R | INSTOCK | 436 | ||||
| EE80C188XL25 | Intel Corporation | INSTOCK | 200 | |||
| 88X2011-C0-BAN-C000 | INSTOCK | 165 | ||||
| EE80C188XL12 | Intel Corporation | INSTOCK RoHS : Compliant | 144 | |||
| XC95288XL-10BG256C | INSTOCK | 120 | ||||
| EE80C188XL12SF12 | Intel Corporation | INSTOCK | 100 | |||
| XC95288XL-7FGG256I | AMD Xilinx | INSTOCK RoHS : Compliant | 70 | |||
| N80C188XL-10/12 SF12 | Intel Corporation | INSTOCK | 23 | |||
| XC95288XL-10PQG208C | AMD Xilinx | INSTOCK RoHS : Compliant | 22 | |||
| XC95288XL-6TQG144C | AMD Xilinx | INSTOCK RoHS : Compliant | 6 | |||
| XC95288XL-6TQ144C | INSTOCK | 5 | ||||
| XC95288XL-7FG256I | INSTOCK | 1 | ||||
 Avnet Abacus | 588L288X2IAT | CTS Corporation | - Tape and Reel (Alt: 588L288X2IAT) RoHS : Compliant | 0 | ||
| 588S288X2CTT | CTS Corporation | - Tape and Reel (Alt: 588S288X2CTT) RoHS : Compliant | 0 | |||
| 588R288X2IAT | CTS Corporation | - Tape and Reel (Alt: 588R288X2IAT) RoHS : Compliant | 0 | |||
| 589R288X2CAT | CTS Corporation | - Tape and Reel (Alt: 589R288X2CAT) RoHS : Compliant | 0 | |||
| 589R288X2CTT | CTS Corporation | - Tape and Reel (Alt: 589R288X2CTT) RoHS : Compliant | 0 | |||
| 589L288X2IAT | CTS Corporation | - Tape and Reel (Alt: 589L288X2IAT) RoHS : Compliant | 0 | |||
| 589R288X2IAT | CTS Corporation | - Tape and Reel (Alt: 589R288X2IAT) RoHS : Compliant | 0 | |||
| 589L288X2CAT | CTS Corporation | - Tape and Reel (Alt: 589L288X2CAT) RoHS : Compliant | 0 | |||
| 588L288X2ITT | CTS Corporation | - Tape and Reel (Alt: 588L288X2ITT) RoHS : Compliant | 0 | |||
| 588L288X2CTT | CTS Corporation | - Tape and Reel (Alt: 588L288X2CTT) RoHS : Compliant | 0 | |||
| 588R288X2CTT | CTS Corporation | - Tape and Reel (Alt: 588R288X2CTT) RoHS : Compliant | 0 | |||
| 589S288X2CTT | CTS Corporation | - Tape and Reel (Alt: 589S288X2CTT) RoHS : Compliant | 0 | |||
| 589S288X2IAT | CTS Corporation | - Tape and Reel (Alt: 589S288X2IAT) RoHS : Compliant | 0 | |||
| MXTK88XX3000 | Murata Manufacturing Co Ltd | (Alt: MXTK88XX3000) RoHS : Compliant | 0 | |||
| 588R288X2CAT | CTS Corporation | - Tape and Reel (Alt: 588R288X2CAT) RoHS : Compliant | 0 | |||
Avnet Asia | FAN53526UC288X | onsemi | (Alt: FAN53526UC288X) RoHS : Compliant | 0 | ||
| XC95288XL-7TQ144I4307 | AMD | (Alt: XC95288XL-7TQ144I4307) RoHS : Not Compliant | 0 | |||
| BLF188XRU | Ampleon | (Alt: BLF188XRU) RoHS : Compliant | 0 | |||
| XC95288XL-6TQG144C4307 | AMD | (Alt: XC95288XL-6TQG144C4307) RoHS : Compliant | 0 | |||
 Avnet Silica | MCIMX8-8X-BB | NXP Semiconductors | Development Board iMX 8QuadXPlus MEK Baseboard CAN Arduino MikroBus Connectors (Alt: MCIMX8-8X-BB) RoHS : Compliant | 0 | ||
| XR3088XIDTR-F | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 45 V to 55 V 8 Pins NSOIC (Alt: XR3088XIDTR-F) RoHS : Compliant | 0 | |||
| MIC2788-XYMT-TR | Microchip Technology Inc | MCCMIC2788XYMTTR (Alt: MIC2788-XYMT-TR) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | N80C188XL12 | Intel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | |
| XC95288XL-10PQ208I | AMD Xilinx | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| XC95288XL-7FGG256C | AMD Xilinx | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| XC95288XL-7TQ144I | AMD Xilinx | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| XC95288XL-6TQG144C | AMD Xilinx | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 788XBXM4L-120A | Magnecraft | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | FLW.188X.375X.049-SS | FLAT WASHER | Flat Washer STAINLESS |
| 18,027 | |
| FLW.188X.750X.047-STL-ZI | FLAT WASHER | Flat Washer STEEL ZINC |
| 4,675 | ||
| FLW.094X.188X.025-SS | FLAT WASHER | Flat Washer STAINLESS |
| 2,897 | ||
| FLW.188X.438X.040-SS | FLAT WASHER | Flat Washer STAINLESS |
| 1,492 | ||
| FLW.188X.500X.040-SS | FLAT WASHER | Flat Washer STAINLESS |
| 1,491 | ||
| FLW.188X.750X.048-316SS | FLAT WASHER | Flat Washer 316 STAINLESS |
| 1,081 | ||
| FLW.203X.688X.040-SS | FLAT WASHER | Flat Washer STAINLESS |
| 476 | ||
| FLW.188X1.00X.051-SS | FLAT WASHER |
| 215 | |||
| FLW.188X.375X.040-SS | FLAT WASHER | Flat Washer STAINLESS |
| 109 | ||
| FLW.188X.438X.049-SS | FLAT WASHER | Flat Washer STAINLESS |
| 107 | ||
| FLWM9.12X18.8X2.3-SS | FLAT WASHER | Flat Washer STAINLESS |
| 17 | ||
| FLWM4.88X12.0X1.40-SS | FLAT WASHER | Flat Washer STAINLESS |
| 9 | ||
| HFHB-0518-8X | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
 EBV Elektronik | SGM5348-8XTS16G/TR | SG Micro Corp | (Alt: SGM5348-8XTS16G/TR) RoHS : Compliant | 0 | ||
 Flip Electronics | FAN53526UC288X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,814 | |
| BLF188XRU | Flip Electronics Manufacturing Services | Stock, Ship Today | 877 | |||
| BLF188XRSU | Flip Electronics Manufacturing Services | Stock, Ship Today | 91 | |||
 Master Electronics | 788XCXRC-12D | Schneider Electric Relays | General purpose relay - SE Relays - 788R - 3PDT - 10A - 12 VDC - Quick terminal - clear cover RoHS : Compliant |
| 215 | |
| 788XCXRC1-120A | Schneider Electric Relays | General purpose relay - SE Relays - 788R - 3PDT - 10A - 120 VAC - Quick terminal - flange cover RoHS : Compliant |
| 172 | ||
| 11P1088X | Switchcraft Conxall | RoHS : Compliant |
| 150 | ||
| RAS18-8X | Thomas & Betts | Sta-Con® Heat Shrinkable Ring Terminal - Wire Range #22-#18AWG - Material Copper - Tin-Plated Finish - Color Red - Bolt Hole #8 - Voltage Rating 600V RoHS : Compliant |
| 70 | ||
| W388X-6 | Schneider Electric Relays | Electromechanical Relay 12VDC 5A DPDT (53.98x37.29x35.33)mm Stud Industrial Relay RoHS : Compliant |
| 29 | ||
| 788XCXRM4L-24D | Schneider Electric Relays | Plug-in electromechanical relay - General Purpose Relays - 788 R - 3PDT - LED clear cover - lock push button - blade terminal - 10A - 24V DC - 3NC + 3NO RoHS : Compliant |
| 27 | ||
| 788XCXRC-240A | Schneider Electric Relays | General purpose relay - SE Relays - 788R - 3PDT - 10A - 240 VAC - Quick terminal - clear cover RoHS : Compliant |
| 14 | ||
| 788XBXM4L-240A | Schneider Electric Relays | BLADE TERMINAL RELAY DPDT 10A@250VAC 240VAC COIL FULL-FEATURE COVER RoHS : Compliant |
| 10 | ||
| 121142-3188-X | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 22-22 - Sockets - Bayonet Coupling RoHS : Compliant |
| 0 | ||
| 121577-0488-X | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 24-28 - Pins - Bayonet Coupling RoHS : Compliant |
| 0 | ||
| US-EMLP-(8-8X15)-RD | Phoenix Contact | Plastic label - Card - red - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - lettering field size: 8.8 x 15 mm - Number of individual labels: 88 RoHS : Compliant |
| 0 | ||
| US-EMP-(8-8X15)-YE | Phoenix Contact | Snap-in markers - Card - yellow - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: snapped into marker carrier - lettering field size: 8.8 x 15 mm - Number of individual labels: 88 RoHS : Compliant |
| 0 | ||
| 121087-0088-X | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 14S-5 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| FBP-PIC16F188XX-IEC61508 | Microchip Technology Inc | IEC 61508 Functional Safety Basic Package for the PIC16F188x RoHS : Compliant |
| 0 | ||
| 121140-0188-X | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 18-1 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
 Pasternack Enterprises US | PE88X2018 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 600 MHz, Input Frequency, Max: 750 MHz, Output Frequency, Min: 1.8 GHz, Output Frequency, Max: 2.25 GHz, Input VSWR, Max: 2, Output VSWR, MAX: 3. Active 3x Frequency Multiplier, 1800 MHz to 2250 MHz Output Frequency, 4 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2018 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 600 MHz and a maximum frequency input of 750 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 1.8 GHz and output maximum frequency of 2.25 GHz. SMA frequency doubler / multiplier PE88X2018 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 3 | |
| PE88X2016 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 320 MHz, Input Frequency, Max: 450 MHz, Output Frequency, Min: 960 MHz, Output Frequency, Max: 1.35 GHz, Input VSWR, Max: 1.8, Output VSWR, MAX: 2.2. Active 3x Frequency Multiplier, 960 MHz to 1350 MHz Output Frequency, 6 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2016 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 320 MHz and a maximum frequency input of 450 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 960 MHz and output maximum frequency of 1.35 GHz. SMA frequency doubler / multiplier PE88X2016 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 3 | ||
| PE88X2003 | Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details).. 2x Frequency Multiplier Module, 8 GHz to 21 GHz Output Frequency, +10 dBm Output Power, Field Replaceable SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2003 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of Error and a maximum frequency input of Error. This SMA microwave frequency multiplier / doubler output minimum frequency is Error and output maximum frequency of Error. SMA frequency doubler / multiplier PE88X2003 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 3 | ||
| PE88X2013 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 2 GHz, Input Frequency, Max: 4 GHz, Output Frequency, Min: 4 GHz, Output Frequency, Max: 8 GHz, Conversion Loss: 18 dB, Input VSWR, Max: 3, Output VSWR, MAX: 2.5. 2x Frequency Multiplier, 4000 MHz to 8000 MHz Output Frequency, 14 dB Conversion Loss, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2013 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 2 GHz and a maximum frequency input of 4 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 4 GHz and output maximum frequency of 8 GHz. SMA frequency doubler / multiplier PE88X2013 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 1 | ||
| PE88X2021 | Pasternack Enterprises | Key Specifications, Output Connector: WR-28 Waveguide with UG-599/U Flange, Connector Input: SMA Female, Minimum Output Frequency: 26.5 GHz, Maximum Output Frequency: 40 GHz, Output Frequency Band: Ka band, Multiplication Factor: 2 X, Multiplier Type: Active, Typical Output Power: 22 dB, Typical Input Power: 4 dB. WR-28 Waveguide with UG-599/U Flanged 2x Active Frequency Multiplier, Ka band, 26.5 GHz to 40 GHz Frequency and +22 dBm Power Outputs. All WR-28 waveguide with UG-599/U flanges active 2X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 2X waveguide doublers (or multipliers) PE88X2021 that can multiply an input power ranging as low as 0 dBm to 4 dBm into as much as 22 dBm. Our active frequency 2X multiplier is manufactured to handle a Ka band frequency input range of 13.25 GHz to 20 GHz and Ka band 26.5 GHz to 40 GHz output. Call or go online to get PE88X2021 active 0 dBm to 4 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-599/U can multiply a 13.25 GHz to 20 GHz input signal into a larger harmonic output of Ka band 26.5 GHz to 40 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2021 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 26.5 GHz to 40 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 2X multipliers with -15 dBc harmonic suppression and UG-599/U pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 350 mA of DC current and SMA female to WR-28 waveguide with UG-599/U flanges and feed-thru-pin connectors. 2X multipliers with -15 dBc harmonic suppression send 26.5 GHz input signals through bandpass filters to select the desired harmonics multiplied to 40 GHz output. These WR-28 waveguide with UG-599/U flanges feed-thru-pin waveguides with aluminum UG-599/U flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 350 mA. Ka band waveguide 4 dBm to 22 dBm doublers operate at -15 dBc harmonic suppression in the Ka band 26.5 GHz to 40 GHz range of frequencies. Throughout the whole process of Ka band signal and power amplification this 26.5 GHz to 40 GHz frequency multiplier with waveguide connection typically has an input drive level between 0 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-599/U flanges connection can withstand input frequencies of 13.25 GHz - 20 GHz multiplied to 40 GHz - 26.5 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-28 waveguide with UG-599/U flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler Ka band WR-28 waveguide with UG-599/U flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the Ka band 26.5 GHz-40 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1 in.; width of 1.5 in.; length of 1.5 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-28 waveguide with UG-599/U flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 2X multipliers. |
| 1 | ||
| PE88X2025 | Pasternack Enterprises | Key Specifications, Output Connector: WR-12 Waveguide with UG-387/U Flange, Connector Input: SMA Female, Minimum Output Frequency: 60 GHz, Maximum Output Frequency: 90 GHz, Output Frequency Band: E band, Multiplication Factor: 6 X, Multiplier Type: Active, Typical Output Power: 20 dB, Typical Input Power: 3 dB. WR-12 Waveguide with UG-387/U Flanged 6x Active Frequency Multiplier, E band, 60 GHz to 90 GHz Frequency and +20 dBm Power Outputs. All WR-12 waveguide with UG-387/U flanges active 6X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 6X waveguide doublers (or multipliers) PE88X2025 that can multiply an input power ranging as low as 1 dBm to 3 dBm into as much as 20 dBm. Our active frequency 6X multiplier is manufactured to handle a E band frequency input range of 10 GHz to 15 GHz and E band 60 GHz to 90 GHz output. Call or go online to get PE88X2025 active 1 dBm to 3 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-387/U can multiply a 10 GHz to 15 GHz input signal into a larger harmonic output of E band 60 GHz to 90 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2025 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 60 GHz to 90 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 6X multipliers with -15 dBc harmonic suppression and UG-387/U pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 231 mA of DC current and SMA female to WR-12 waveguide with UG-387/U flanges and feed-thru-pin connectors. 6X multipliers with -15 dBc harmonic suppression send 60 GHz input signals through bandpass filters to select the desired harmonics multiplied to 90 GHz output. These WR-12 waveguide with UG-387/U flanges feed-thru-pin waveguides with aluminum UG-387/U flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 231 mA. E band waveguide 3 dBm to 20 dBm doublers operate at -15 dBc harmonic suppression in the E band 60 GHz to 90 GHz range of frequencies. Throughout the whole process of E band signal and power amplification this 60 GHz to 90 GHz frequency multiplier with waveguide connection typically has an input drive level between 1 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-387/U flanges connection can withstand input frequencies of 10 GHz - 15 GHz multiplied to 90 GHz - 60 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-12 waveguide with UG-387/U flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler E band WR-12 waveguide with UG-387/U flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the E band 60 GHz-90 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1.704 in.; width of 1.673 in.; length of 1.673 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-12 waveguide with UG-387/U flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 6X multipliers. |
| 1 | ||
| PE88X2026 | Pasternack Enterprises | Key Specifications, Output Connector: WR-10 Waveguide with UG-387/U-M Flange, Connector Input: SMA Female, Minimum Output Frequency: 75 GHz, Maximum Output Frequency: 11 GHz, Output Frequency Band: W band, Multiplication Factor: 6 X, Multiplier Type: Active, Typical Output Power: 10 dB, Typical Input Power: 6 dB. WR-10 Waveguide with UG-387/U-M Flanged 6x Active Frequency Multiplier, W band, 75 GHz to 11 GHz Frequency and +10 dBm Power Outputs. All WR-10 waveguide with UG-387/U-M flanges active 6X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 6X waveguide doublers (or multipliers) PE88X2026 that can multiply an input power ranging as low as 5 dBm to 6 dBm into as much as 10 dBm. Our active frequency 6X multiplier is manufactured to handle a W band frequency input range of 12.5 GHz to 18.33 GHz and W band 75 GHz to 11 GHz output. Call or go online to get PE88X2026 active 5 dBm to 6 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-387/U-Mod can multiply a 12.5 GHz to 18.33 GHz input signal into a larger harmonic output of W band 75 GHz to 11 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2026 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 75 GHz to 11 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 6X multipliers with -15 dBc harmonic suppression and UG-387/U-Mod pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 270 mA of DC current and SMA female to WR-10 waveguide with UG-387/U-M flanges and feed-thru-pin connectors. 6X multipliers with -15 dBc harmonic suppression send 75 GHz input signals through bandpass filters to select the desired harmonics multiplied to 11 GHz output. These WR-10 waveguide with UG-387/U-M flanges feed-thru-pin waveguides with aluminum UG-387/U-Mod flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 270 mA. W band waveguide 6 dBm to 10 dBm doublers operate at -15 dBc harmonic suppression in the W band 75 GHz to 11 GHz range of frequencies. Throughout the whole process of W band signal and power amplification this 75 GHz to 11 GHz frequency multiplier with waveguide connection typically has an input drive level between 5 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-387/U-Mod flanges connection can withstand input frequencies of 12.5 GHz - 18.33 GHz multiplied to 11 GHz - 75 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-10 waveguide with UG-387/U-M flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler W band WR-10 waveguide with UG-387/U-M flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the W band 75 GHz-11 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1.704 in.; width of 1.673 in.; length of 1.673 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-10 waveguide with UG-387/U-M flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 6X multipliers. |
| 1 | ||
| PE88X2020 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 950 MHz, Input Frequency, Max: 1.5 GHz, Output Frequency, Min: 2.85 GHz, Output Frequency, Max: 4.5 GHz, Input VSWR, Max: 1.5, Output VSWR, MAX: 2.5. Active 3x Frequency Multiplier, 2850 MHz to 4500 MHz Output Frequency, 9 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2020 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 950 MHz and a maximum frequency input of 1.5 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 2.85 GHz and output maximum frequency of 4.5 GHz. SMA frequency doubler / multiplier PE88X2020 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 1 | ||
| PE88X2027 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 9 MHz, Input Frequency, Max: 14.5 MHz, Output Frequency, Min: 18 MHz, Output Frequency, Max: 29 MHz, Input VSWR, Max: 2, Output VSWR, MAX: 2.7. 2x Active Frequency Multiplier, 18 GHz to 29 GHz Output Frequency, 12.0 dB Conversion Gain, SMA. RF frequency multiplier (also referred to as a frequency doubler) PE88X2027 from Pasternack has SMA connectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 9 GHz and a maximum frequency input of 14.5 GHz. This SMA microwave frequency multiplier/doubler output minimum frequency is 18 GHz and output maximum frequency of 29 GHz. Our active 2x frequency multiplier can operate at temperatures ranging from -40 to +85 deg C and has a maximum VSWR of 2:1. Make your online purchase right now to take advantage of our same-day shipping. This active 2x frequency multiplier is powered by DC voltage ranging from 9 to 15 Vdc with 110 mA of DC current. Our 50 Ohm frequency multiplier has an input threaded SMA female connector and output 2.92mm female connector. This active frequency multiplier is suitable for aerospace & defense, test & measurement, microwave radio systems, military & commercial communication systems, research & development, SATCOM and wireless communications applications. Our SMA female multiplier comes with a 50 Ohm impedance and a max input power rating (CW) of 6 dBm. The active 2x frequency multiplier has a typical fundamental isolation of 20 dB. Our active 2x frequency multiplier has a storage temperature ranging from -55 to +105 deg C. Our active 2x frequency multiplier has a typical phase noise of -132 dBc/Hz at 100kHz offset. This 6 dBm active frequency multiplier has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our active 2x frequency multiplier has a typical conversion gain of 12 dB. Additional dimensions and specifications for this active 2x frequency multiplier are on our downloadable PDF datasheet above. SMA frequency doubler/multiplier PE88X2027 from Pasternack is rated for a 6 dBm and is just one part of over 40,000 RF, microwave, and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock. Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. For further information on similar products, our expert technical support and trained sales team can get you to the ideal active 2x frequency multiplier as per your requirements. |
| 1 | ||
| PE88X2002 | Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details).. 2x Frequency Multiplier Module, 32 GHz to 46 GHz Output Frequency, +8 dBm Output Power, Field Replaceable 2.92mm. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2002 from Pasternack has 2.92mm conectors and are 50 Ohm. Our 2.92mm frequency multiplier is manufactured for a minimum frequency input of Error and a maximum frequency input of Error. This 2.92mm microwave frequency multiplier / doubler output minimum frequency is Error and output maximum frequency of Error. 2.92mm frequency doubler / multiplier PE88X2002 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with 2.92mm connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE88X2019 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 700 MHz, Input Frequency, Max: 1 GHz, Output Frequency, Min: 2.1 GHz, Output Frequency, Max: 3 GHz, Input VSWR, Max: 1.5, Output VSWR, MAX: 2.5. Active 3x Frequency Multiplier, 2100 MHz to 3000 MHz Output Frequency, 12 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2019 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 700 MHz and a maximum frequency input of 1 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 2.1 GHz and output maximum frequency of 3 GHz. SMA frequency doubler / multiplier PE88X2019 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE88X2014 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 4 GHz, Input Frequency, Max: 8 GHz, Output Frequency, Min: 8 GHz, Output Frequency, Max: 16 GHz, Conversion Loss: 23 dB, Input VSWR, Max: 3.5, Output VSWR, MAX: 3. 2x Frequency Multiplier, 8000 MHz to 16000 MHz Output Frequency, 17 dB Conversion Loss, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2014 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 4 GHz and a maximum frequency input of 8 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 8 GHz and output maximum frequency of 16 GHz. SMA frequency doubler / multiplier PE88X2014 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE88X2010 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 10 MHz, Input Frequency, Max: 1 GHz, Output Frequency, Min: 20 MHz, Output Frequency, Max: 2 GHz, Conversion Loss: 16 dB, Input VSWR, Max: 2, Output VSWR, MAX: 2. 2x Frequency Multiplier, 20 MHz to 2000 MHz Output Frequency, 12.0 dB Conversion Loss, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2010 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 10 MHz and a maximum frequency input of 1 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 20 MHz and output maximum frequency of 2 GHz. SMA frequency doubler / multiplier PE88X2010 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE88X2023 | Pasternack Enterprises | Key Specifications, Output Connector: WR-15 Waveguide with UG-385/U Flange, Connector Input: SMA Female, Minimum Output Frequency: 50 GHz, Maximum Output Frequency: 75 GHz, Output Frequency Band: V band, Multiplication Factor: 4 X, Multiplier Type: Active, Typical Output Power: 15 dB, Typical Input Power: 7 dB. WR-15 Waveguide with UG-385/U Flanged 4x Active Frequency Multiplier, V band, 50 GHz to 75 GHz Frequency and +15 dBm Power Outputs. All WR-15 waveguide with UG-385/U flanges active 4X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 4X waveguide doublers (or multipliers) PE88X2023 that can multiply an input power ranging as low as 5 dBm to 7 dBm into as much as 15 dBm. Our active frequency 4X multiplier is manufactured to handle a V band frequency input range of 12.5 GHz to 18.75 GHz and V band 50 GHz to 75 GHz output. Call or go online to get PE88X2023 active 5 dBm to 7 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-385/U can multiply a 12.5 GHz to 18.75 GHz input signal into a larger harmonic output of V band 50 GHz to 75 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2023 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 50 GHz to 75 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 4X multipliers with -15 dBc harmonic suppression and UG-385/U pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 275 mA of DC current and SMA female to WR-15 waveguide with UG-385/U flanges and feed-thru-pin connectors. 4X multipliers with -15 dBc harmonic suppression send 50 GHz input signals through bandpass filters to select the desired harmonics multiplied to 75 GHz output. These WR-15 waveguide with UG-385/U flanges feed-thru-pin waveguides with aluminum UG-385/U flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 275 mA. V band waveguide 7 dBm to 15 dBm doublers operate at -15 dBc harmonic suppression in the V band 50 GHz to 75 GHz range of frequencies. Throughout the whole process of V band signal and power amplification this 50 GHz to 75 GHz frequency multiplier with waveguide connection typically has an input drive level between 5 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-385/U flanges connection can withstand input frequencies of 12.5 GHz - 18.75 GHz multiplied to 75 GHz - 50 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-15 waveguide with UG-385/U flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler V band WR-15 waveguide with UG-385/U flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the V band 50 GHz-75 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 0.937 in.; width of 1.5 in.; length of 1.5 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-15 waveguide with UG-385/U flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 4X multipliers. |
| 0 | ||
| PE88X2017 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 450 MHz, Input Frequency, Max: 600 MHz, Output Frequency, Min: 1.35 GHz, Output Frequency, Max: 1.8 GHz, Input VSWR, Max: 1.8, Output VSWR, MAX: 2.2. Active 3x Frequency Multiplier, 1350 MHz to 1800 MHz Output Frequency, 9 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2017 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 450 MHz and a maximum frequency input of 600 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 1.35 GHz and output maximum frequency of 1.8 GHz. SMA frequency doubler / multiplier PE88X2017 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
 Vyrian | MAX6388XS20D5+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2V, BICMOS, PDSO4 RoHS : Compliant | 12,299 | ||
| MAX6388XS21D2-T | Maxim Integrated Products | Power Supply Support Circuit, Adjustable, 2 Channel, BICMOS, PDSO4 RoHS : Not Compliant | 11,664 | |||
| MAX6388XS16D2+ | Analog Devices Inc | Power Management Circuit, Adjustable, 1 Channel, +1.58V, BICMOS, PDSO4 RoHS : Compliant | 11,537 | |||
| MAX6388XS22D5+ | Analog Devices Inc | Power Management Circuit, Adjustable, 1 Channel, +2.19V, BICMOS, PDSO4 RoHS : Compliant | 10,948 | |||
| MAX6388XS33D3+ | Analog Devices Inc | Power Management Circuit, Adjustable, 1 Channel, +3.3V, BICMOS, PDSO4 RoHS : Compliant | 10,880 | |||
| MAX6388XS19D5-T | Maxim Integrated Products | Power Supply Support Circuit, Adjustable, 2 Channel, BICMOS, PDSO4 RoHS : Not Compliant | 10,088 | |||
| MAX6388XS36D6-T | Maxim Integrated Products | Power Supply Support Circuit, Adjustable, 2 Channel, BICMOS, PDSO4 RoHS : Not Compliant | 9,036 | |||
| MAX6388XS29D6+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.93V, BICMOS, PDSO4 RoHS : Compliant | 6,480 | |||
| MAX6388XS42D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.2V, BICMOS, PDSO4 RoHS : Compliant | 5,769 | |||
| XC95288XV-6PQG208C | AMD Xilinx | Flash PLD, 6ns, 288-Cell, CMOS, PQFP208 RoHS : Compliant | 3,473 | |||
XC95288XV-10CSG280C | AMD Xilinx | Flash PLD, 10ns, 288-Cell, CMOS, PBGA280 RoHS : Compliant | 3,337 | |||
| XC95288XV-7FGG256C | AMD Xilinx | Flash PLD, 7.5ns, 288-Cell, CMOS, PBGA256 RoHS : Compliant | 3,336 | |||
| XC95288XV-7FG256C | AMD Xilinx | Flash PLD, 7.5ns, 288-Cell, CMOS, PBGA256 RoHS : Not Compliant | 2,767 | |||
| XC95288XL-7TQG144I | AMD Xilinx | Flash PLD, 7.5ns, 288-Cell, CMOS, PQFP144 RoHS : Compliant | 1,793 | |||
| XC95288XL-10TQ144I | AMD Xilinx | Flash PLD, 10ns, 288-Cell, CMOS, PQFP144 RoHS : Compliant | 1,575 | |||
 Win Source Electronics | EE80C188XL20 | Intel Corporation | MPU 188 Processor CISC 16bit 20MHz 68-Pin PLCC / 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSORS |
| 6,697 | |
| XC95288XL-10TQ144I | AMD Xilinx | IC CPLD 288MC 10NS 144TQFP RoHS : Compliant |
| 4,648 | ||
| XC95288XL-10TQG144C | AMD Xilinx | IC CPLD 288MC 10NS 144TQFP RoHS : Compliant |
| 3,600 | ||
| EN80C188XL20 | Intel Corporation | 16-Bit Microcontroller |
| 3,536 | ||
| XC95288XL-10PQG208I | AMD Xilinx | IC CPLD 288MC 10NS 208QFP RoHS : Compliant |
| 2,500 | ||
| XC95288XL-10PQG208C | AMD Xilinx | IC CPLD 288MC 10NS 208QFP RoHS : Compliant |
| 2,000 | ||
| XC95288XL-10TQG144I | AMD Xilinx | IC CPLD 288MC 10NS 144TQFP RoHS : Compliant |
| 2,000 | ||
| XC95288XL-7TQG144I | AMD Xilinx | IC CPLD 288MC 7.5NS 144TQFP RoHS : Compliant |
| 1,818 | ||
| XC95288XL-10BG256I | AMD Xilinx | 6 ns pin-to-pin logic delays RoHS : Not Compliant |
| 1,800 | ||
| BLF188XR | Nexperia | Power LDMOS transistor |
| 500 | ||
| XC95288XL-7FGG256C | AMD Xilinx | IC CPLD 288MC 7.5NS 256FBGA RoHS : Compliant |
| 249 | ||
| XC95288XL-10PQ208I | AMD Xilinx | IC CPLD 288MC 10NS 208QFP RoHS : Compliant |
| 54 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand