 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C564G-P20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | C0805C564K5RACAUTO | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.56 uF, 50 V, 0805 [2012 Metric], ? 10%, X7R, C Series - Tape and Reel (Alt: C0805C564K5RACAUTO) RoHS : Compliant |
| 15,000 | |
0805ZC564JAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.56 uF, 10 V, 0805 [2012 Metric], ? 5%, X7R, 2.01 mm, 1.25 mm - Tape and Reel (Alt: 0805ZC564JAT2A) RoHS : Compliant |
| 2,000 | ||
| B32529C564J | TDK Corporation | General Purpose Film Capacitor, Metallized Polyester, Radial Box - 2 Pin, 0.56 uF, ? 5% - Bulk (Alt: B32529C0564J000) RoHS : Compliant |
| 1,940 | ||
| SPC5644AF0MLU3 | NXP Semiconductors | - Trays (Alt: SPC5644AF0MLU3) RoHS : Compliant |
| 1,439 | ||
| C330C564K5R5TA | KEMET Corporation | - Bulk (Alt: C330C564K5R5TA) RoHS : Compliant |
| 100 | ||
| C1210C564K1RACTU | KEMET Corporation | C1210C564K1RACTU - Tape and Reel (Alt: C1210C564K1RACTU) RoHS : Compliant |
| 0 | ||
| QCC564 | TE Connectivity | - Bag (Alt: 1878665-1) RoHS : Not Compliant |
| 0 | ||
| EC5645ETTS-3.6864M TR | Abracon Corporation | - Tape and Reel (Alt: EC5645ETTS-3.6864M TR) RoHS : Compliant | 0 | |||
| EC5645TS-1.8432M TR | Abracon Corporation | - Tape and Reel (Alt: EC5645TS-1.8432M TR) RoHS : Compliant | 0 | |||
| EC5645TTS-11.0592M TR | Abracon Corporation | - Tape and Reel (Alt: EC5645TTS-11.0592M TR) RoHS : Compliant | 0 | |||
| EC5645TTS-14.31818M TR | Abracon Corporation | - Tape and Reel (Alt: EC5645TTS-14.31818M TR) RoHS : Compliant | 0 | |||
| EC5645ETTTS-24.576M TR | Abracon Corporation | - Tape and Reel (Alt: EC5645ETTTS-24.576M TR) RoHS : Compliant | 0 | |||
| SPC5645CCF0VLU1R | NXP Semiconductors | Microcontroller 32-Bit e200z4d RISC 2MB Flash 176-Pin LQFP T/R - Tape and Reel (Alt: SPC5645CCF0VLU1R) RoHS : Compliant |
| 0 | ||
| SPC5646CCAVMJ1R | NXP Semiconductors | MCU 32-Bit SPC5646C e200z4d/e200z0h RISC 3MB Flash 3V to 5.5V 256-Pin LBGA T/R - Tape and Reel (Alt: SPC5646CCAVMJ1R) RoHS : Compliant |
| 0 | ||
| 08055C564KAT2A | Kyocera AVX Components | T101 COMMERCIAL - Tape and Reel (Alt: 08055C564KAT2A) RoHS : Compliant |
| 0 | ||
 Newark | C0603C564K4PACTU | KEMET Corporation | Cap, 0.56Uf, 16V, Mlcc, 0603; Available Until Stocks Are Exhausted Alternative Available |Kemet C0603C564K4PACTU RoHS : Compliant |
| 8,196 | |
| C0603C564K4PACTU | KEMET Corporation | Cap, 0.56Uf, 16V, Mlcc, 0603; Available Until Stocks Are Exhausted Alternative Available |Kemet C0603C564K4PACTU RoHS : Compliant |
| 8,196 | ||
| C1206C564K1RACAUTO | KEMET Corporation | Capacitor, 0.56Uf, X7R, 100V, 1206; |Kemet C1206C564K1RACAUTO RoHS : Compliant |
| 2,320 | ||
| C1206C564K1RACAUTO | KEMET Corporation | Capacitor, 0.56Uf, X7R, 100V, 1206; |Kemet C1206C564K1RACAUTO RoHS : Compliant |
| 2,320 | ||
| C0805C564J5RACTU | KEMET Corporation | Smd Mlc Cap, 0.56Uf, 50V, X7R, 0805; |Kemet C0805C564J5RACTU RoHS : Compliant |
| 2,290 | ||
| C0805C564J5RACTU | KEMET Corporation | Smd Mlc Cap, 0.56Uf, 50V, X7R, 0805; |Kemet C0805C564J5RACTU RoHS : Compliant |
| 2,290 | ||
| C0805C564K3RACTU | KEMET Corporation | Cap, 0.56µf, 25V, 10%, X7R, 0805; |Kemet C0805C564K3RACTU RoHS : Compliant |
| 2,000 | ||
| C0805C564K3RACTU | KEMET Corporation | Cap, 0.56µf, 25V, 10%, X7R, 0805; |Kemet C0805C564K3RACTU RoHS : Compliant |
| 2,000 | ||
| C1206C564K3RACTU | KEMET Corporation | Cap, 0.56?f, 25V, 10%, X7R, 1206; |Kemet C1206C564K3RACTU RoHS : Compliant |
| 1,289 | ||
| C1206C564K3RACTU | KEMET Corporation | Cap, 0.56?f, 25V, 10%, X7R, 1206; |Kemet C1206C564K3RACTU RoHS : Compliant |
| 1,289 | ||
| C0805C564K3RACTU | KEMET Corporation | Cap Mlcc Smd, 0.56Uf, 25V, X7R; |Kemet C0805C564K3RACTU RoHS : Compliant |
| 78 | ||
| C0805C564K3RACTU | KEMET Corporation | Cap Mlcc Smd, 0.56Uf, 25V, X7R; |Kemet C0805C564K3RACTU RoHS : Compliant |
| 78 | ||
| SPC5644AF0MLU1 | NXP Semiconductors | Mcu, 32Bit, Power, 150Mhz, Lqfp-176; |NXP Semiconductors SPC5644AF0MLU1 RoHS : Compliant |
| 37 | ||
| EC5645ETTTS-50.000M TR | Ecliptek Corporation | Osc, 50Mhz, Lvcmos, Smd, 2.5Mm X 2Mm; |Ecliptek EC5645ETTTS-50.000M TR RoHS : Compliant |
| 7 | ||
| EC5645ETTTS-50.000M TR | Ecliptek Corporation | Osc, 50Mhz, Lvcmos, Smd, 2.5Mm X 2Mm; |Ecliptek EC5645ETTTS-50.000M TR RoHS : Compliant |
| 7 | ||
 Analog Devices Inc | HMC564 | Analog Devices Inc | lo Noise amp Chip, 7.0 - 13.5 RoHS : Compliant |
| 4,700 | |
| HMC564-SX | Analog Devices Inc | GaAs PHEMT MMIC LNA, 7 - 12 GH RoHS : Compliant |
| 75 | ||
| 116156-HMC564LC4 | Analog Devices Inc | HMC564LC4 Evaluation PCB |
| 23 | ||
| HMC564LC4 | Analog Devices Inc | lo Noise amp SMT, 7 - 14 GHz RoHS : Compliant |
| 0 | ||
| HMC564LC4TR | Analog Devices Inc | lo Noise amp SMT, 7 - 14 GHz RoHS : Compliant |
| 0 | ||
| HMC564LC4TR-R5 | Analog Devices Inc | lo Noise amp SMT, 7 - 14 GHz RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | SPC5645CF0MLU1 | NXP Semiconductors | NXP 32-bit MCU, Dual Power Arch, 2MB Flash, 120MHz, -40/+125degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | |
| SPC5643AF0MVZ2 | NXP Semiconductors | NXP 32-bit MCU, Power Arch core, 3MB Flash, 120MHz, -40/+125degC, Automotive Grade, PBGA 324, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5644AF0MMG3 | NXP Semiconductors | 32BIT,4MB Flash,192K RAM,FlexRay,3 CAN, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5644AF0MLU1 | NXP Semiconductors | NXP 32-bit MCU, Power Arch core, 4MB Flash, 150MHz, -40/+125degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| TRK-USB-MPC5643L | NXP Semiconductors | StarterTRAK USB Dev Kit for Qorivva MPC5643L, Primary Tower connector, OSBDM debug through USB, RoHS : Not Compliant |
| 0 | ||
| MDC564L144S1M | NXP Semiconductors | Daughter Card for Qorivva MPC5643L LQFP 144, RoHS : Compliant |
| 0 | ||
| KITMPC5643DBEVM | NXP Semiconductors | Evaluation Kit - Qorivva 32-bit MCU, MPC5643 Daughter board Qorivva 32-bit MCU, RoHS : Not Compliant |
| 0 | ||
| SPC5643LFK0MLQ1 | NXP Semiconductors | NXP 32-bit MCU, Dual Power Arch, 1MB Flash, 120MHz, -40/+125degC, Automotive Grade, QFP 144, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5644BK0VLU1 | NXP Semiconductors | NXP 32-bit MCU, Power Arch, 1.5MB Flash, 120MHz, -40/+105degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5646BF0MLU1 | NXP Semiconductors | NXP 32-bit MCU, Power Arch core, 3MB Flash, 120MHz, -40/+125degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| MPC564AKIT208 | NXP Semiconductors | Evaluation Kit for Qorivva MPC564xA, XPC56xxMB2 Motherboard and MPC564AADPT208 mini-module, RoHS : Compliant |
| 0 | ||
| MPC564AKIT176 | NXP Semiconductors | Evaluation Kit for Qorivva MPC564xA, XPC56xxMB2 Motherboard and MPC564AADPT176 mini-module, RoHS : Compliant |
| 0 | ||
| SPC5642AF2MLU3 | NXP Semiconductors | NXP 32-bit MCU, Power Arch core, 2MB Flash, 80MHz, -40/+125degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5643LFK0MMM1 | NXP Semiconductors | NXP 32-bit MCU, Dual Power Arch, 1MB Flash, 120MHz, -40/+125degC, Automotive Qual, MAPBGA 257, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
| SPC5646BK0MLU1 | NXP Semiconductors | NXP 32-bit MCU, Power Arch core, 3MB Flash, 120MHz, -40/+125degC, Automotive Grade, QFP 176, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
 RS | C0603C564K8PACTU | KEMET Corporation | C0603C 560NF CERAMIC MULTILAYER CAPACITOR, 10 VDC, +85DEGC, X5R DIELEC, +/-10% RoHS : Compliant |
| 3,450 | |
| C564 | Martin Sprocket & Gear Inc | 14.5- PA SPUR GEAR, 5 DP, 64 TEETH, 12.8" PD, 1.1875" ID, CAST IRON |
| 0 | ||
| DMC564030R | Panasonic Electronic Components | COMPLEX TRANSISTOR 50V 100MA SMINI6-F3-B RoHS : Compliant |
| 0 | ||
EC5645TS-30.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 30.000MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| C0603C564K8PACTU | KEMET Corporation | C0603C 560NF CERAMIC MULTILAYER CAPACITOR, 10 VDC, +85DEGC, X5R DIELEC, +/-10% RoHS : Compliant |
| 0 | ||
| EC5645TTS-3.6864M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 3.6864MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C RoHS : Compliant |
| 0 | ||
| EC5645ETTS-4.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 4.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5645ETTTS-1.8432M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 1.8432MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5645ETTTS-18.432M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 18.432MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5645ETTTS-33.000M | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 33.000MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C RoHS : Compliant |
| 0 | ||
| EC5645TS-1.8432M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 1.8432MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C |
| 0 | ||
| EC5645ETTS-3.6864M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 3.6864MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C |
| 0 | ||
| EC5645TTS-11.0592M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 11.0592MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C |
| 0 | ||
| EC5645TTS-14.31818M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 14.31818MHZ SMD 2.0MM X 2.5MM 50PPM -10°C TO +70°C |
| 0 | ||
| EC5645ETTTS-24.576M TR | Ecliptek Corporation | STANDARD CLOCK OSCILLATOR 24.576MHZ SMD 2.0MM X 2.5MM 50PPM -40°C TO +85°C |
| 0 | ||
 STMicroelectronics | SPC564L60L5CCFQY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 0 | |
SPC564A80L7COBY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Powertrain Applications RoHS : Compliant |
| 0 | ||
| SPC564L54L5CBFSY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 0 | ||
| SPC564L70L5BBOSR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 0 | ||
| SPC564B74L7B9ECX | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Body and Gateway Applications RoHS : Compliant |
| 0 | ||
| SPC564A80AVB176 | STMicroelectronics | VertiCal base board for A-line 4M in LQFP176 target package |
| 0 | ||
| SPC564A80L7COBR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Powertrain Applications RoHS : Compliant |
| 0 | ||
| SPC564L54L5CBFSR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 0 | ||
| SPC564A70L7COBR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Powertrain Applications RoHS : Compliant |
| 0 | ||
| SPC564A80AVB324 | STMicroelectronics | VertiCal base board for A-Line 4M in BGA324 target package |
| 0 | ||
| SPC564A70L7CFBR | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Powertrain Applications RoHS : Compliant |
| 0 | ||
| SPC564B74L8C9E0X | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Body and Gateway Applications RoHS : Compliant |
| 0 | ||
| SPC564B74L7C8E0X | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Body and Gateway Applications RoHS : Compliant |
| 0 | ||
| SPC564B64L7C800Y | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Body and Gateway Applications RoHS : Compliant |
| 0 | ||
| SPC564L70L5BBOSY | STMicroelectronics | 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | VSC5641EV | Microchip Technology Inc | 56-port Ethernet Switch, Projected EOL: |
| 52 | |
| VSC5640EV | Microchip Technology Inc | SparX-5,-5i Reference Design, Projected EOL: |
| 0 | ||
 Bisco Industries | SC564-12 | Hammond Manufacturing | 4 | |||
 Rochester Electronics | SPC5644BAVLU1R | NXP Semiconductors | IC MCU e200z4d 32Bit 1 Core FLASH 1.5MB (1.5M x 8) 120MHz 176-QFP T/R RoHS : Compliant |
| 9,500 | |
| GPC5642AF2MLU1 | NXP Semiconductors | MPC5642A - ANDORRA 2M-NXP 32-bit MCU, Power Architecture core, 2MB Flash, |
| 5,000 | ||
| SPC5644AF0MLU1R | NXP Semiconductors | Microcontroller, 32-Bit, FLASH, E200Z4 CPU- Power Architecture, 150MHz, CMOS, PQFP176 RoHS : Compliant |
| 11,726 | ||
| SPC5643LF2MMM1 | NXP Semiconductors | IC MCU e200z4 32Bit 2 Core FLASH 1MB (1M x 8) 120MHz 257-BGA Tray RoHS : Compliant |
| 700 | ||
| SPC5643LF2MLQ8 | NXP Semiconductors | IC MCU e200z4 32Bit 2 Core FLASH 1MB (1M x 8) 80MHz 144-QFP Tray RoHS : Compliant |
| 300 | ||
UCC5641PW28 | Texas Instruments | SCSI Terminator, 9-Line, 105ohm, BICMOS, PDSO28 RoHS : Not Compliant |
| 50 | ||
UCC5640PW24 | Texas Instruments | SCSI Terminator, 9-Line, 105ohm, BICMOS, PDSO24 RoHS : Compliant |
| 10,556 | ||
SN74AC564PWR | Texas Instruments | Bus Driver, AC Series, 8-Func, 8-Bit, Inverted Output, CMOS, PDSO20 RoHS : Compliant |
| 120 | ||
| SPC5642AF2MLU2R | Freescale Semiconductor | MPC5642A - ANDORRA 2M-NXP 32-bit MCU, Power Architecture core, 2MB Flash, |
| 521 | ||
SPC5643AF0MVZ2 | Freescale Semiconductor | IC MCU e200z4 32Bit 1 Core FLASH 3MB (3M x 8) 120MHz 324-BGA Tray RoHS : Compliant |
| 92 | ||
| SPC5643LF2MMM1 | Freescale Semiconductor | IC MCU e200z4 32Bit 2 Core FLASH 1MB (1M x 8) 120MHz 257-BGA Tray RoHS : Compliant |
| 14 | ||
SPC5644AF0MMG3 | Freescale Semiconductor | IC MCU e200z4 32Bit 1 Core FLASH 4MB (4M x 8) 80MHz 208-BGA Tray RoHS : Compliant |
| 214 | ||
| SPC5645CF0MLU1 | Freescale Semiconductor | MPC5645C - BOLERO 3M-NXP 32-bit MCU, Dual Power Arch, 2MB Flash RoHS : Compliant |
| 190 | ||
| CD74AC564E | Harris Semiconductor | Bus Driver, AC Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDIP20 RoHS : Not Compliant |
| 506 | ||
CLC5644IM | National Semiconductor Corporation | Operational Amplifier, 4 Func, 15000uV Offset-Max, BIPolar, PDSO14 RoHS : Not Compliant |
| 264 | ||
 Sager | EC5640-000 | TE Connectivity | Wire Labels & Markers 11551425 RoHS : Compliant | 0 | ||
| IULK1-1REC5-64-20.0-01 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| EC5646-000 | TE Connectivity | Wire Labels & Markers 11551431 RoHS : Compliant | 0 | |||
| 219-3-1REC5-64-7-8-27 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| EC5647-000 | TE Connectivity | Wire Labels & Markers 11551432 RoHS : Compliant | 0 | |||
| 219-3-1REC5-64-8-5-30-AH | Sensata Circuit Breakers | Circuit Breakers Cir Brkr,HydMag |
| 0 | ||
| ALCC-56-4N | ABB Group | WELD ALUM COMP TERM 556 AAC 4N |
| 0 | ||
| C564143001 | TE Connectivity | TE Connectivity 99M0111-24-92 RoHS : Compliant | 0 | |||
| WNC-5641 | BUD Industries Inc | WALL MOUNT NETWORK ELECTRONICS CABINET (23.6 X 23.6 X 11.9 IN) |
| 0 | ||
| 219-3-1REC5-64-7-8-18.2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| EC5645-000 | TE Connectivity | Wire Labels & Markers 11551430 RoHS : Compliant | 0 | |||
| C56426-000 | TE Connectivity | Labels and Industrial Warning Signs LKZ12B3 RoHS : Compliant |
| 0 | ||
| DPC-56-420 | Signal Transformer Inc | Power Transformers 1500Vrms 24VA 8Term Thru-Hole |
| 0 | ||
| IUGN66-1REC5-64-20.0 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr, Hyd Mag, 1 pl, 80VDC, 30A,panel seal |
| 0 | ||
| IULK1-1REC5-64-5.00-01 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
 TME | 12065C564K4Z2A | KYOCERA Corporation | Capacitor: ceramic; 560nF; 50VDC; X7R; SMD; Features: FLEXITERM |
| 300,000 | |
| SPC5645SF1VLU | NXP Semiconductors | SPC5645SF1VLU RoHS : Compliant |
| 5,900 | ||
| 12063C564JAZ2A | KYOCERA Corporation | Capacitor: ceramic; 560nF; 25VDC; X7R; SMD; Features: FLEXITERM |
| 2,000 | ||
CD74HC564E | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; THT; DIP20; HC; OUT: 3-state RoHS : Compliant |
| 1,028 | ||
| 0805ZC564JAT2A | KYOCERA Corporation | Capacitor: ceramic; 560nF; 10V; X7R; ±5%; SMD; 0805 |
| 448 | ||
| EC5645ETTTS-20.000M TR | Abracon Corporation | 20MHz; SMD; 15pF; ±50ppm; -40÷85°C |
| 400 | ||
| 22201C564KAT4A | Kyocera AVX Components | Capacitor: ceramic; MLCC; 560nF; 100V; X7R; ±10%; SMD; 2220; 330mm RoHS : Compliant |
| 0 | ||
| SN74AC564N | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; THT; DIP20; AC; OUT: 3-state RoHS : Compliant |
| 0 | ||
| GCM21BL81C564MA37L | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 560nF; 16V; X8L; ±20%; SMD; 0805; 180mm RoHS : Compliant |
| 0 | ||
| SN74AC564PW | Texas Instruments | IC: digital; D flip-flop; Ch: 8; CMOS; SMD; TSSOP20; AC; OUT: 3-state RoHS : Compliant |
| 0 | ||
| GCG21BL81C564KA01K | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 560nF; 16V; X8L; ±10%; SMD; 0805; 330mm RoHS : Compliant |
| 0 | ||
| GCM21BL81C564KA37L | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 560nF; 16V; X8L; ±10%; SMD; 0805; 180mm RoHS : Compliant |
| 0 | ||
| SN74AC564PWR | Texas Instruments | IC: digital; inverting,D flip-flop; Ch: 8; IN: 8; CMOS; SMD; TSSOP20 RoHS : Compliant |
| 0 | ||
| EVC564 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| GCM21BL81C564MA37K | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 560nF; 16V; X8L; ±20%; SMD; 0805; 330mm RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | SPC564A70L7CFAR | STMicroelectronics | 32bit Auto MCU, 2MG Flash, Power Train Architecture RoHS : Compliant | 22,080 | ||
 ComSIT USA | SPC5642AF2MLU1 | Freescale Semiconductor | 32-Bit Mikrocontroller - MCU NXP 32-bit MCU, Power Arch core, 2MB Flash, 150MHz, -40/+125degC, Automotive Grade, QFP 176 RoHS : Compliant | 3,493 | ||
| SPC564B74L7B8E0X | STMicroelectronics | 32-BIT MCU FAMILY BUILT ON THE POWER ARCHITECTURE RISC Microcontroller, 32-Bit, FLASH, E200Z4 CPU, 120MHz, CMOS, PQFP176 RoHS : Compliant | 3,269 | |||
| SPC5644CF0MLT1R | NXP Semiconductors | Microcontroller RISC Microcontroller, 32-Bit, FLASH, E200Z4D CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 1,440 | |||
| SPC564A80L7CFAR | STMicroelectronics | IC MCU e200z4 32Bit 1 Core FLASH 4MB (4M x 8) 150MHz 176-QFP T/R RoHS : Compliant | 861 | |||
| SPC564A70L7C20BR | STMicroelectronics | 32-BIT MCU FAMILY BUILT ON THE EMBEDDED POWER ARCHITECTURE Microcontroller, 32-Bit, 80MHz, CMOS RoHS : Compliant | 500 | |||
| SPC5643LF3MLQ1 | Freescale Semiconductor | Electronic Component RoHS : Compliant | 500 | |||
| SPC564L54L3CBOQR | STMicroelectronics | 32-BIT POWER ARCHITECTURE MICROCONTROLLER Microcontroller, 32-Bit, FLASH, SPC56 CPU, 120MHz, CMOS, PQFP100 RoHS : Compliant | 124 | |||
| SPC564B64L7 | STMicroelectronics | Electronic Component RoHS : Compliant | 80 | |||
TL16PC564BPZ | Texas Instruments | PCMCIA UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER Serial I/O Controller, 1 Channel(s), 0.0140380859375MBps, CMOS, PQFP100 RoHS : Not Compliant | 18 | |||
 Interstate Connecting Components | QCC564 | TE Connectivity | 1878665-1 |
| 0 | |
| C564143001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC99M0111-24-92 RoHS : Compliant | 0 | |||
| 447AC564B1404 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| AAC5644-00 | TE Connectivity | 100P2175-16-1-C-WR4-16 | 0 | |||
| AAC5640-00 | TE Connectivity | 100P1958-13-10-1-ZB | 0 | |||
| 447DC564B1003 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| AAC5643-00 | TE Connectivity | 100P2175-12-1-ZN-R4-12 | 0 | |||
| 447AC564B1004 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
 NexGen Digital | C340C564M1R5TA7303 | KEMET Corporation | RoHS : Compliant | 875 | ||
| MC74AC564D | onsemi | 200 | ||||
| HMC564LC4 | Hittite Microwave Corp | RoHS : Compliant | 108 | |||
| ACSC56-41QBWA/D-F01 | Kingbright | RoHS : Compliant | 69 | |||
| HMC564LC3B | Hittite Microwave Corp | 36 | ||||
 Powell Electronics | QCC564 | TE Connectivity | Connectors |
| 7 | |
 Richardson RFPD | HMC564 | Analog Devices Inc | RF Amp Single LNA 13.5GHz 3.5V 4-Pin Die Tray RoHS : Compliant | 0 | ||
| 116156-HMC564LC4 | Analog Devices Inc | HMC564LC4 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| HMC564-SX | Analog Devices Inc | RF Amp Single LNA 13.5GHz 3.5V 4-Pin Die Tray RoHS : Compliant |
| 0 | ||
| 101C564U016DF2D | Knowles CDE | Cap Aluminum Lytic 0.56F 16V -10% to 75% (76.2 X 1 RoHS : Compliant |
| 0 | ||
| HMC564LC4 | Analog Devices Inc | RF Amp Single LNA 14GHz 3.5V 24-Pin CLLCC EP Cut T RoHS : Compliant |
| 0 | ||
| HMC564LC4TR | Analog Devices Inc | RF Amp Single LNA 14GHz 3.5V 24-PinCLLCC EP T/R RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | SG-8002JC56.448000MHZ | Seiko Epson Corporation | INSTOCK | 7,000 | ||
| C333C564K5R5CA7317 | KEMET Corporation | INSTOCK | 1,500 | |||
| SPC5643LFK0MLL8 | NXP Semiconductors | INSTOCK | 1,225 | |||
| SN74HC564M | INSTOCK | 202 | ||||
| C0805C564K3RACTU | INSTOCK | 150 | ||||
| 74HC564D | Philips Semiconductors | INSTOCK RoHS : Compliant | 67 | |||
| SPC5646CF0VLU1R | NXP Semiconductors | INSTOCK RoHS : Compliant | 53 | |||
| M74HC564B1 | ST-Ericsson | INSTOCK | 20 | |||
| SPC5643LMMM1 | NXP Semiconductors | INSTOCK | 10 | |||
 Avnet Abacus | DMC564030R | Panasonic Electronic Components | COMPOSITE TRANSISTOR WITH BUILTIN RE (Alt: DMC564030R) RoHS : Compliant | 0 | ||
| C346C564K1R5TA | KEMET Corporation | Multilayer Ceramic Capacitor 056 uF 100 V 10 Radial Leaded X7R 508 mm 736 mm 407 mm (Alt: C346C564K1R5TA) RoHS : Compliant | 0 | |||
| 12063C564M4T2A | Kyocera AVX Components | Multilayer Ceramic Capacitor 056 uF 25 V 20 X7R 1206 3216 Metric (Alt: 12063C564M4T2A) RoHS : Compliant | 0 | |||
| C340C564M1R5TA | KEMET Corporation | Multilayer Ceramic Capacitor 056 uF 100 V 20 Radial Leaded X7R 508 mm 736 mm 407 mm (Alt: C340C564M1R5TA) RoHS : Compliant | 0 | |||
| C440C564M5U5TA | KEMET Corporation | (Alt: C440C564M5U5TA) RoHS : Compliant | 0 | |||
1206YC564JAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor 056 uF 16 V 1206 3216 Metric 5 X7R 32 mm 16 mm (Alt: 1206YC564JAT2A) RoHS : Compliant | 0 | |||
| 12065C564J4T2A | Kyocera AVX Components | Multilayer Ceramic Capacitor 056 uF 50 V 5 X7R 1206 3216 Metric (Alt: 12065C564J4T2A) RoHS : Compliant | 0 | |||
| 12063C564M4Z2A | Kyocera AVX Components | Multilayer Ceramic Capacitor 056 uF 25 V 20 X7R 1206 3216 Metric (Alt: 12063C564M4Z2A) RoHS : Compliant | 0 | |||
| 12063C564KAZ2A | Kyocera AVX Components | Multilayer Ceramic Capacitor 056 uF 25 V 10 X7R 1206 3216 Metric (Alt: 12063C564KAZ2A) RoHS : Compliant | 0 | |||
12103C564K4Z2A | Kyocera AVX Components | Multilayer Ceramic Capacitor 056 uF 25 V 10 X7R 1210 3225 Metric (Alt: 12103C564K4Z2A) RoHS : Compliant | 0 | |||
| C333C564K5R5TA7301 | KEMET Corporation | - Tape and Reel (Alt: C333C564K5R5TA7301) RoHS : Compliant | 0 | |||
| C0603C564M8PAC7867 | KEMET Corporation | Multilayer Ceramic Capacitor 056 uF 10 V 20 X5R 0603 1608 Metric (Alt: C0603C564M8PAC7867) RoHS : Compliant | 0 | |||
| GCG21BL81C564MA01L | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 056 uF 16 V 0805 2012 Metric 20 X8L GCG Series 2 mm (Alt: GCG21BL81C564MA01L) RoHS : Not Compliant | 0 | |||
| GCJ21BR71C564KA01L | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 056 uF 16 V 0805 2012 Metric 10 X7R GCJ Series 2 mm (Alt: GCJ21BR71C564KA01L) RoHS : Compliant | 0 | |||
| C1825C564K5RAC7025 | KEMET Corporation | Multilayer Ceramic Capacitor 056 uF 50 V 10 X7R 1825 4564 Metric - Tape and Reel (Alt: C1825C564K5RAC7025) RoHS : Compliant | 0 | |||
Avnet Asia | EC5645ETTS-24.576M TR | Abracon Corporation | (Alt: EC5645ETTS-24.576M TR) RoHS : Compliant | 0 | ||
| C0805C564K3RAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.56 uF, 25 V, 0805 [2012 Metric], ? 10%, X7R, C Series (Alt: C0805C564K3RAC7800) RoHS : Compliant |
| 0 | ||
| C0805C564K4RAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.56 uF, 16 V, 0805 [2012 Metric], ? 10%, X7R, C Series (Alt: C0805C564K4RAC7800) RoHS : Compliant | 0 | |||
| 0805ZC564JAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.56 uF, 10 V, 0805 [2012 Metric], ? 5%, X7R, 2.01 mm, 1.25 mm (Alt: 0805ZC564JAT2A) RoHS : Compliant | 0 | |||
 Avnet Silica | SPC5645SF1VVUR | NXP Semiconductors | MCU 32Bit SPC5645x e200z4d RISC 2MB Flash 33V5V 416Pin TEPBGA TR (Alt: SPC5645SF1VVUR) RoHS : Compliant | 2,000 | ||
| SPC5643LF2MLQ1 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 120MHz 128 KB RAM1MB Program 3V36Vin LQFP144 (Alt: SPC5643LF2MLQ1) RoHS : Compliant | 480 | |||
| SPC5642AF2MLU1 | NXP Semiconductors | MCU 32Bit MPC56xx e200z4 RISC 2048KB Flash 12V33V5V 176Pin LQFP Brick (Alt: SPC5642AF2MLU1) RoHS : Compliant | 80 | |||
| SPC5645CF0MLU1 | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 176Pin LQFP Tray (Alt: SPC5645CF0MLU1) RoHS : Compliant | 0 | |||
| SPC5643LF2MMM1 | NXP Semiconductors | (Alt: SPC5643LF2MMM1) RoHS : Compliant | 0 | |||
| SPC5644AF0MVZ3 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 80MHz 192 KB RAM4MB Program 114V132Vin TEPBGA324 (Alt: SPC5644AF0MVZ3) RoHS : Compliant | 0 | |||
| SPC5644AF0MMG3 | NXP Semiconductors | 32bit MCU PowerPC e200Z4 80 MHz 4 MB 192 KB 208 Pins MAPBGA (Alt: SPC5644AF0MMG3) RoHS : Compliant | 0 | |||
| SPC5646CCAVMJ1 | NXP Semiconductors | 32bit MCU e200z4d 120 MHz 3 MB 256 KB 256 Pins MAPBGA (Alt: SPC5646CCAVMJ1) RoHS : Compliant | 0 | |||
| SPC5643LF2MLQ8 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 80MHz 128 KB RAM1MB Program 3V36Vin LQFP144 (Alt: SPC5643LF2MLQ8) RoHS : Compliant | 0 | |||
| SPC5646CCAVMJ1R | NXP Semiconductors | MCU 32Bit SPC5646C e200z4de200z0h RISC 3MB Flash 3V to 55V 256Pin LBGA TR (Alt: SPC5646CCAVMJ1R) RoHS : Compliant | 0 | |||
| MDC564B176QSB3M | NXP Semiconductors | MPC564xBC Qorivva 32Bit Microcontroller Daughter Card (Alt: MDC564B176QSB3M) RoHS : Compliant | 0 | |||
| SPC5643LF2MLQ8R | NXP Semiconductors | MCU 32Bit MPC56xx e200z4d RISC 1024KB Flash 33V5V 144Pin LQFP TR (Alt: SPC5643LF2MLQ8R) RoHS : Compliant | 0 | |||
| SPC564L54L3BCOQY | STMicroelectronics | MCU 32Bit SPC564L54x e200z4d RISC 768KB Flash 33V5V 100Pin LQFP Tray (Alt: SPC564L54L3BCOQY) RoHS : Compliant | 0 | |||
| SPC564L54L3BCOQR | STMicroelectronics | MCU 32Bit SPC564L54x e200z4d RISC 768KB Flash 33V5V 100Pin LQFP TR (Alt: SPC564L54L3BCOQR) RoHS : Compliant | 0 | |||
| SPC564L60L5CCFQY | STMicroelectronics | (Alt: SPC564L60L5CCFQY) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | EC5645ETTTS-25.000M TR | Abracon Corporation | Standard Clock Oscillator 25.000MHz SMD 2.0mm x 2.5mm 50ppm -40 C to +85 C |
| 0 | |
| EC5645ETTTS-32.000M TR | Abracon Corporation |
| 0 | |||
| EC5645ETTTS-24.000M TR | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | C0603C564K8PACTU | KEMET Corporation | RoHS : Compliant | 81 | ||
 Component Electronics, Inc | C0805C564K8RAC7800 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 32,800 | |
| C0805C564K3RAC7800 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,100 | ||
| C340C564M1R5CA7303 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 600 | ||
| CD74HC564M | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
 DB Roberts | C5-64-35-3 | Southco | Streamlined looks and easy operation make this compression latch an ideal choice for highly visible installations requiring a secure sealed fit. Compressive action pulls door tight without rubbing action or wear on pawl or frame. | 0 | ||
 EBV Elektronik | SPC5645SF1VVU | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC56xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5645SF1VVU) RoHS : Compliant | 36,520 | ||
| SPC5644AF0MMG1R | NXP Semiconductors | 32bit MCU PowerPC e200Z4 150 MHz 4 MB 192 KB 208 Pins MAPBGA (Alt: SPC5644AF0MMG1R) RoHS : Compliant | 1,000 | |||
| SPC5643LF2MLQ8 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 80MHz 128 KB RAM1MB Program 3V36Vin LQFP144 (Alt: SPC5643LF2MLQ8) RoHS : Compliant | 420 | |||
| SPC5644AF0MVZ1 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 150MHz 192 KB RAM4MB Program 114V132Vin TEPBGA324 (Alt: SPC5644AF0MVZ1) RoHS : Compliant | 360 | |||
| SPC5645SF1VLU | NXP Semiconductors | MCU 32Bit MPC56xx e200z4d RISC 2048KB Flash 33V5V 176Pin LQFP Tray (Alt: SPC5645SF1VLU) RoHS : Compliant | 40 | |||
| SPC5644AF0MLU1 | NXP Semiconductors | 32bit MCU PowerPC e200Z4 150 MHz 4 MB 192 KB 176 Pins LQFP (Alt: SPC5644AF0MLU1) RoHS : Compliant | 40 | |||
| SPC5645CF0MLU1 | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 176Pin LQFP Tray (Alt: SPC5645CF0MLU1) RoHS : Compliant | 0 | |||
| SPC5643LF2MMM1 | NXP Semiconductors | (Alt: SPC5643LF2MMM1) RoHS : Compliant | 0 | |||
| SPC5644AF0MMG3 | NXP Semiconductors | 32bit MCU PowerPC e200Z4 80 MHz 4 MB 192 KB 208 Pins MAPBGA (Alt: SPC5644AF0MMG3) RoHS : Compliant | 0 | |||
| SPC5646CCAVMJ1R | NXP Semiconductors | MCU 32Bit SPC5646C e200z4de200z0h RISC 3MB Flash 3V to 55V 256Pin LBGA TR (Alt: SPC5646CCAVMJ1R) RoHS : Compliant | 0 | |||
| SPC5644AF0MMG3R | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 4096KB Flash 33V5V 208Pin MAPBGA TR (Alt: SPC5644AF0MMG3R) RoHS : Compliant | 0 | |||
| PPC5643LFF2MLL6 | NXP Semiconductors | HighEnd MCU (Alt: PPC5643LFF2MLL6) RoHS : Compliant | 0 | |||
| PPC5643LFF2MLQ1 | NXP Semiconductors | 32BIT 1M FLASH 128K RAM Flexra (Alt: PPC5643LFF2MLQ1) RoHS : Compliant | 0 | |||
| SPC564L54L3BCOQY | STMicroelectronics | MCU 32Bit SPC564L54x e200z4d RISC 768KB Flash 33V5V 100Pin LQFP Tray (Alt: SPC564L54L3BCOQY) RoHS : Compliant | 0 | |||
| SPC564L54L3BCOQR | STMicroelectronics | MCU 32Bit SPC564L54x e200z4d RISC 768KB Flash 33V5V 100Pin LQFP TR (Alt: SPC564L54L3BCOQR) RoHS : Compliant | 0 | |||
 Flip Electronics | SPC5644CF0MLT1R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 5,606 | |
| SPC5644BAVLU1R | NXP Semiconductors | Stock | 5,000 | |||
| SPC5646BCF0VLU1 | NXP Semiconductors | Stock RoHS : Compliant | 4,000 | |||
| SPC5644CK0VLU8 | NXP Semiconductors | Stock RoHS : Compliant | 3,398 | |||
| SPC5643LF2MLQ8R | NXP Semiconductors | Stock RoHS : Compliant | 3,316 | |||
| GPC5643LF2MLQ8 | NXP Semiconductors | Stock, Ship Today |
| 3,000 | ||
| SPC5643LF2MLQ1R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 1,533 | |||
| SPC5644BF0VLU1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| SPC5644BF0VLU1R | NXP Semiconductors | Stock RoHS : Compliant | 1,000 | |||
| SPC5645CCF0VLU8R | NXP Semiconductors | Stock | 920 | |||
| GPC5643LFF2MLQ1 | NXP Semiconductors | Stock, Ship Today |
| 900 | ||
| SPC5643LF2MLQ8 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 436 | ||
| SPC5645BF0VLU1 | NXP Semiconductors | Stock RoHS : Compliant | 200 | |||
| SPC5645BF0MLU1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 200 | ||
| SPC5642AF2MLU1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 142 | ||
 Maritex | SPC5643LFF2MLQ1 | NXP Semiconductors | Microcontrollers (MCU); SPC5643LFF2MLQ1; NXP SEMICONDUCTORS; 128 kB; FLASH; 16; 120 MHz RoHS : Compliant |
| 120 | |
 Master Electronics | LDS-C5642RI | ITW Lumex | Display Module - LED Character and Numeric - Green - 7-Segment - 1 Character - Common Cathode - 2.2V - 10mA Test - 10-DIP (0.600 15.24mm). RoHS : Compliant |
| 997 | |
| AZ420-C56-40LUS | American ZETTLER Inc | Electromechanical Relay DPDT 2A 18VDC 2.5KOhm Socket RoHS : Compliant |
| 41 | ||
| AZ2428-C56-4WHUS | American ZETTLER Inc | Electromechanical Relay DPDT 7.5A 18VDC 2.5KOhm Through Hole RoHS : Compliant |
| 40 | ||
| AZ428-C56-40L | American ZETTLER Inc | Electromechanical Relay DPDT 2A 18VDC 2.5KOhm Through Hole RoHS : Compliant |
| 28 | ||
| AZ420-C56-40L | American ZETTLER Inc | Electromechanical Relay DPDT 2A 18VDC 2.5KOhm Socket RoHS : Compliant |
| 19 | ||
| AZ428-C56-4H | American ZETTLER Inc | Electromechanical Relay DPDT 5A 18VDC 2.5KOhm Through Hole RoHS : Compliant |
| 11 | ||
| QCC564 | TE Connectivity | QCC564 RoHS : Not Compliant |
| 10 | ||
| IUGN66-1REC5-64-20.0 | Sensata Circuit Breakers | Circuit Breaker Magnetic - Two Pole - 20A - W/ Auxiliary Switch - 50/60Hz Short Delay - Sealed Toggle W/Bushing Mounting - Screw Terminals. RoHS : Compliant |
| 4 | ||
| IULK1-1REC5-64-20.0-01 | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| E32D160HPC564MEB7U | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| 219-3-1REC5-64-8-5-30-AH | Sensata Circuit Breakers | Cir Brkr HydMag RoHS : Compliant |
| 0 | ||
| E32D160HPC564MEB7M | United Chemi-Con Inc | Cap Aluminum Lytic 0.56F 16V 20% (76.2 X 117mm) Screw Terminal 0.007 Ohm 32560mA 2000h 105ƒA€A°C Bulk RoHS : Compliant |
| 0 | ||
| EXB-D10C564J | Panasonic Electronic Components | Res Thick Film NET 560K Ohm 5% ±200ppm/°C BUS 10-Pin 1206 Concave SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| VSC5641EV | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| DPC-56-420 | Signal Transformer Inc | Power Transformer - 24VA - Dual Primary 115/230VAC - Series 56VCT@420mA - Parallel 28V@840mA - PC Thru Hole Mount RoHS : Compliant |
| 0 | ||
 Neutron USA | SPC564A80CAL176 | STMicroelectronics | Sockets & Adapters Calibration system SPC564A80 QFP176 |
| 1 | |
| DPC-56-420 | Signal Transformer Inc | Laminated Core 24VA Power Transformer 115V, 230V Primary Parallel 28V, Series 56V Secondary Parallel 840mA, Series 420mA Through Hole |
| 0 | ||
 Pasternack Enterprises US | PE3C5640 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. | 100 | ||
| PE3C5640LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405AL coax, LF solder. | 100 | |||
| PE3C5640-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.4mm Male to 2.4mm Male Cable 6 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640-6 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640-6 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. |
| 20 | ||
| PE3C5640-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640-18 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640-18 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. |
| 20 | ||
| PE3C5640LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Male Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640-36 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640-36 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. |
| 20 | ||
| PE3C5640-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640-24 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. |
| 20 | ||
| PE3C5640-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has male gender on end 1 and male on end 2. PE3C5640-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.4mm plug to 2.4mm plug cable assembly PE3C5640-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5640-12 RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm RF cable assembly as per your requirements. |
| 20 | ||
| PE3C5640LF-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.4mm Male to 2.4mm Male Cable 6 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-6 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Male Cable 36 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-36 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 36 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5640LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3C5643 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. BNC Male to Straight Cut Lead Cable Using LMR-195-FR Coax., Radio frequency assembly BNC male to straight cut lead cable using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to straight cut lead cable using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This BNC to straight cut lead cable is a male to sexless coax assembly, PE3C5643, can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. BNC plug to straight cut lead sexless cable assembly PE3C5643 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5643 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to straight cut lead cable using LMR-195-FR coax. | 0 | |||
| PE3C5646 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly BNC male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and TNC cable connection on the other. Our BNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to TNC cable is a male to male coax assembly, PE3C5646, can also be known as a BNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to TNC plug cable assembly PE3C5646 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5646 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to TNC male cable using LMR-195-LLPL coax. | 0 | |||
| PE3C5645 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using PE-C100-LSZH Coax., Radio frequency assembly BNC male to TNC male cable using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to TNC male cable using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and TNC cable connection on the other. Our BNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to TNC cable is a male to male coax assembly, PE3C5645, can also be known as a BNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to TNC plug cable assembly PE3C5645 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5645 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to TNC male cable using PE-C100-LSZH coax. | 0 | |||
| PE3C5644 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. SHV Plug to Straight Cut Lead Cable Using LMR-195-FR Coax., Radio frequency assembly SHV plug to straight cut lead cable using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SHV plug to straight cut lead cable using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and straight cut lead cable connection on the other. Our SHV to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. This SHV to straight cut lead cable is a plug to sexless coax assembly, PE3C5644, can also be known as a SHV male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SHV male to straight cut lead sexless cable assembly PE3C5644 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SHV plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5644 can also be used in the other direction and will be straight cut lead sexless to SHV plug cable assembly if the opposite connectivity is required. SHV male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to straight cut lead cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to straight cut lead cable using LMR-195-FR coax. | 0 | |||
 Vyrian | SPC5646CCF0VLT1 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, E200Z4D CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 10,391 | ||
| SPC564A74L7CFAR | STMicroelectronics | Microcontroller, 32-Bit, FLASH, 150MHz, CMOS, PQFP176 RoHS : Compliant | 10,251 | |||
CD74HC564ME4 | Texas Instruments | Bus Driver, HC/UH Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20 RoHS : Compliant | 8,225 | |||
| SN74HC564NP3 | Texas Instruments | D Flip-Flop, 8-Func, Positive Edge Triggered, CMOS, PDIP20 RoHS : Not Compliant | 6,816 | |||
SPC5645BF0VLT1R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, E200Z4D CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant | 6,739 | |||
| SNC54HC564FH | Texas Instruments | D Flip-Flop, 8-Func, Positive Edge Triggered, CMOS, CQCC20 RoHS : Not Compliant | 6,043 | |||
| SPC5645CF0MLU1 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, E200Z4 CPU, 120MHz, CMOS, PQFP176 RoHS : Compliant | 5,823 | |||
| HMC564LC4RTR | Analog Devices Inc | Wide Band Low Power Amplifier, 7000MHz Min, 14000MHz Max, 1 Func, GAAS RoHS : Compliant | 5,474 | |||
UCC5647PM | Texas Instruments | SCSI Terminator, 27-Line, 105ohm, BICMOS, PQFP64 RoHS : Not Compliant | 5,288 | |||
| UCC5640PW24TRG4 | Texas Instruments | SCSI Terminator, 9-Line, 105ohm, BICMOS, PDSO24 RoHS : Compliant | 5,234 | |||
| SN74HC564FN3 | Texas Instruments | D Flip-Flop, 8-Func, Positive Edge Triggered, CMOS, PQCC20 RoHS : Not Compliant | 4,921 | |||
| UCC5641PW28 | Texas Instruments | SCSI Terminator, 9-Line, 105ohm, BICMOS, PDSO28 RoHS : Not Compliant | 4,845 | |||
| CD74HC564M96E4 | Texas Instruments | Bus Driver, HC/UH Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20 RoHS : Compliant | 3,453 | |||
| UCC5646PMTR | Texas Instruments | SCSI Terminator, 27-Line, 105ohm, BICMOS, PQFP64 RoHS : Not Compliant | 3,338 | |||
| CLC5644IM | National Semiconductor Corporation | Operational Amplifier, 4 Func, 15000uV Offset-Max, BIPolar, PDSO14 RoHS : Not Compliant | 2,295 | |||
 Win Source Electronics | ALC5640-VB-CG | Realtek Semiconductor |
| 10,520 | ||
| ALC5640-VB-CGT | Realtek Semiconductor |
| 10,070 | |||
| ALC5645-CG | Realtek Semiconductor | Multi-Channel Audio Hub/CODEC |
| 10,000 | ||
| SPC5644AF0MLU1R | Freescale Semiconductor | IC MCU 32BIT 4MB FLASH 176LQFP / e200z4 series Microcontroller IC 32-Bit Single-Core 150MHz 4MB (4M x 8) FLASH 176-LQFP (24x24) RoHS : Compliant |
| 9,400 | ||
| ALC5645-CGT | Realtek Semiconductor |
| 6,000 | |||
| DMC564040R | Panasonic Electronic Components | TRANS PREBIAS DUAL NPN SMINI6 RoHS : Compliant |
| 2,120 | ||
| SPC5645CF0MLU1 | Nexperia | IC MCU 32BIT 2MB FLASH 176LQFP |
| 1,735 | ||
| HMC564LC4TR | Analog Devices Inc | IC RF AMP GP 7GHZ-14GHZ 24QFN / GaAs SMT pHEMT LOW NOISE AMPLIFIER RoHS : Compliant |
| 1,600 | ||
| HMC564LC4 | Analog Devices Inc | GaAs SMT PHEMT LOW NOISE AMPLIFIER, 7 - 14 GHz | IC RF AMP GP 7GHZ-14GHZ 24QFN RoHS : Compliant |
| 1,000 | ||
| RTC5641 | Richwave Technology Corp |
| 700 | |||
| SPC5645SF1VVU | Nexperia | IC MCU 32BIT 2MB FLASH 416PBGA |
| 439 | ||
| SPC5644AF0MVZ1 | Freescale Semiconductor | IC MCU 32BIT 4MB FLASH 324TEBGA RoHS : Compliant |
| 425 | ||
| SPC5645SF1VVUR | Nexperia | IC MCU 32BIT 2MB FLASH 416PBGA |
| 400 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Indian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Mexican
British
New Zealand