| Electronic Components Datasheet Search |
|
C9900-R249 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 10C9900750 | Brady Worldwide Inc | RoHS : Compliant |
| 746 | |
| EC-9903-BT | BUD Industries Inc | Cabinet Rack - Doorless - Non-Vented - 5U - 15.500 L x 21.060 W x 10.810 H (393.70mm x 534.92mm x 284.57mm) Overall Dimensions - Steel - Black Textured. RoHS : Compliant |
| 1 | ||
| EC9901-000 | TE Connectivity | ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant |
| 0 | ||
| GC9902-S12 | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| GC9904-UC | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| GC9901-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead RoHS : Compliant |
| 0 | ||
| EC9903-000 | TE Connectivity | ZHD-SCE-1K-12.7-50-S1-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9902-000 | TE Connectivity | ZHD-SCE-1K-12.7-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9909-000 | TE Connectivity | ZHD-SCE-5K-2.4-50-S1-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| BTNKSC990 | C&K Switches | Switch Access Tactile Switch Round Button RoHS : Compliant |
| 0 | ||
| EC9900-000 | TE Connectivity | ZHD-SCE-1K-9.5-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9907-000 | TE Connectivity | ZHD-SCE-1K-25.4-50-S1-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9904-000 | TE Connectivity | ZHD-SCE-1K-19.0-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| GC9902-128A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip RoHS : Compliant |
| 0 | ||
| GC9902-17SP | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | B43416C9907A | TDK Corporation | Aluminum Electrolytic Capacitor with Snap-In Terminals 900uF 400V -10% to 20% 2-Pin Through Hole Cardboard - Bulk (Alt: B43416C9907A000) RoHS : Compliant |
| 0 | |
| LTST-C990TGKT | Lite-On Semiconductor Corporation | CHIP LED DOME LENS GREEN 525NM, SUPER BRIGHTNESS - Tape and Reel (Alt: LTST-C990TGKT) RoHS : Compliant |
| 0 | ||
| LTST-C990NEKT-Q | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTST-C990NEKT-Q) RoHS : Compliant | 0 | |||
| LTST-C990KRKT | Lite-On Semiconductor Corporation | CHIP LED DOME LENS RED - Tape and Reel (Alt: LTST-C990KRKT) RoHS : Compliant |
| 0 | ||
| LTE-C9901 | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9901) RoHS : Compliant |
| 0 | ||
| MRS25000C9901FC100 | Vishay Intertechnologies | Resistor Professional Thin Film 9.9k Ohm 1% 3/5W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MRS25000C9901FC100) RoHS : Not Compliant |
| 0 | ||
| LTE-C9908 | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9908) RoHS : Compliant |
| 0 | ||
| LTST-C990TBKT | Lite-On Semiconductor Corporation | CHIP LED DOME LENS GREEN 525NM, SUPER BRIGHTNESS - Tape and Reel (Alt: LTST-C990TBKT) RoHS : Compliant |
| 0 | ||
| RLR07C9901FMB14 | Vishay Intertechnologies | - Bulk (Alt: RLR07C9901FMB14) RoHS : Not Compliant |
| 0 | ||
| RLR07C9900FSB14 | Vishay Intertechnologies | - Bulk (Alt: RLR07C9900FSB14) RoHS : Not Compliant |
| 0 | ||
| TLCC990K00Q | VPG Foil Resistors | Resistor Precision Thin Film 990kOhm 0.02% 1/4W ?10ppm/?C 2-Pin Radial - Bulk (Alt: TLCC990K00Q) RoHS : Not Compliant |
| 0 | ||
| LTE-C9906-Q | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9906-Q) RoHS : Compliant |
| 0 | ||
| LTE-C9904-P | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9904-P) RoHS : Compliant |
| 0 | ||
| MBB02070C9901CC100 | Vishay Intertechnologies | - Ammo Pack (Alt: MBB02070C9901CC100) RoHS : Compliant |
| 0 | ||
| MBB02070C9903BC100 | Vishay Intertechnologies | Resistor Professional Metal Film 990k Ohm 0.1% 2/5W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MBB02070C9903BC100) RoHS : Not Compliant |
| 0 | ||
![]() Newark | BTNKSC990 | C&K Switches | Cap Black Ksc9 Series; |C&k Components BTNKSC990 RoHS : Compliant |
| 6,600 | |
| CPC9909NETR | Littelfuse Inc | Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR RoHS : Compliant |
| 2,000 | ||
| CPC9909NETR | Littelfuse Inc | Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR RoHS : Compliant |
| 2,000 | ||
| CPC9909NE | Littelfuse Inc | Led Driver, Boost/Buck, 120Khz, Soic-8Ep; |Littelfuse CPC9909NE RoHS : Compliant |
| 864 | ||
| EC-9904-BT | BUD Industries Inc | Case 19", 6.0, Steel, Portable; |Bud Industries EC-9904-BT RoHS : Compliant |
| 5 | ||
| EC-9906-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 8U, Steel; |Bud Industries EC-9906-BT RoHS : Compliant |
| 4 | ||
| EC-9905-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 7U, Steel; |Bud Industries EC-9905-BT RoHS : Compliant |
| 2 | ||
| EC-9902-S | BUD Industries Inc | 19" Case, Cabinet, Sand, 4U, Steel; |Bud Industries EC-9902-S RoHS : Compliant |
| 1 | ||
| EC-9902-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 4U, Steel; |Bud Industries EC-9902-BT RoHS : Compliant |
| 1 | ||
| C-990 | General Devices | Cable Carrier, Steel, Clear; |General Devices C-990 RoHS : Compliant |
| 0 | ||
| EC-9905-S | BUD Industries Inc | 19" Case, Cabinet, Sand, 7U, Steel; |Bud Industries EC-9905-S RoHS : Compliant |
| 0 | ||
| EC-9906-S | BUD Industries Inc | 19" Case, Cabinet, Sand, 8U, Steel; |Bud Industries EC-9906-S RoHS : Compliant |
| 0 | ||
| EC9901-000 | TE Connectivity | Wire Labels & Markers Zhd-Sce-1K-9.5-50-; |Te Connectivity Raychem EC9901-000 RoHS : Not Compliant |
| 0 | ||
| EC9905-000 | TE Connectivity | Markers 19.0Mm Dia 1Prescore 50Mm Length; |Te Connectivity Raychem EC9905-000 RoHS : Not Compliant |
| 0 | ||
| EC-9903-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 5U, Steel; |Bud Industries EC-9903-BT RoHS : Compliant |
| 0 | ||
![]() RS | EC-9902-BT | BUD Industries Inc | RACK, CABINET,19 IN,4U/7 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | |
| EC-9906-BT | BUD Industries Inc | RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | ||
| EC-9904-BT | BUD Industries Inc | RACK, CABINET,19 IN,6U/10.5 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES RoHS : Compliant |
| 1 | ||
| C99012CC7 | Norgren | VALVE, POPPET SPECIAL 3/4 NPT |
| 0 | ||
| BPACC9900 | Brother International | SHOULDER CARRYING CASE FOR PTE920BT |
| 0 | ||
| EC-9905-S | BUD Industries Inc | RACK, CABINET,19 IN,7U/12.25 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC-9906-S | BUD Industries Inc | RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC9901-000 | TE Connectivity | THERMOFIT, PRINTABLE LOW FIRE HAZARD,2:1,WHITE,0.375,ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant |
| 0 | ||
| EC9905-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 19.0MM DIA 1PRESCORE 50MM LENGTH WHITE;EC9905-000 RoHS : Compliant |
| 0 | ||
| STC99-0104 | FW Bell | STANDARD, SEMI RIGID RUBBER STEM |
| 0 | ||
| EC9903-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 12.7MM DIA 1PRESCORE 50MM LENGTH WHITE;EC9903-000 RoHS : Compliant |
| 0 | ||
| EC9902-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 12.7MM DIA 50MM LENGTH WHITE;EC9902-000 RoHS : Compliant |
| 0 | ||
| EC-9905-BT | BUD Industries Inc | RACK, CABINET,19 IN,7U/12.25IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC-9903-BT | BUD Industries Inc | RACK, CABINET,19 IN,5U/8.75 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| R3G310-FC99-01 | ebm-papst | DC CENTRIFUGAL FAN, BACKWARD-CURVED,318X165X318MM,1530 CFM,24V, IP44,1650 RPM,105 |
| 0 | ||
![]() Microchip Technology Inc | GC9904-UC | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
| GC9901-00 | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9902-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9904-S12 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-127C | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| GC9901-127B | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| GC9902-128A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 RoHS : Compliant |
| 0 | ||
| GC9902-17SP | Microchip Technology Inc | Si TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-QR1-CLA | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9901-174C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-127B-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-174C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9903-127C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-127B-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Sager | EC9901-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant | 0 | ||
| EC9905-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-19.0-50-S1-9 RoHS : Compliant | 0 | |||
| VC4803-00-0000 (C990) | General Devices | General Devices | 0 | |||
| C-990 | General Devices | Racks & Rack Cabinet Accessories |
| 0 | ||
| EC-9902-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (9.1 X 21.1 X 15.5 IN) |
| 0 | ||
| EC-9905-S | BUD Industries Inc | COMMUNICATIONS CABINET SAND (14.3 X 21.1 X 15.5 IN) |
| 0 | ||
| EC9903-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-12.7-50-S1-9 RoHS : Compliant | 0 | |||
| EC9902-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-12.7-50-9 RoHS : Compliant | 0 | |||
| C9904 | TE Connectivity | TE Connectivity | 0 | |||
| EC-9906-S | BUD Industries Inc | COMMUNICATIONS CABINET SAND (16.1 X 21.1 X 15.5 IN) |
| 0 | ||
| EC9909-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-5K-2.4-50-S1-9 RoHS : Compliant | 0 | |||
| EC-9905-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (14.3 X 21.1 X 15.5 IN) |
| 0 | ||
| 060-C990-09 | HONEYWELL TEST AND MEASUREMENT | Industrial Pressure Sensors | 0 | |||
| EC-9906-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (16.1 X 21.1 X 15.5 IN) |
| 0 | ||
| EC-9903-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (10.8 X 21.1 X 15.5 IN) |
| 0 | ||
![]() TME | EC9901-000 | TE Connectivity | Marker: cable-heat shrinkable; 25mm; white; Shrinking ratio: 2: 1 RoHS : Compliant |
| 2,000 | |
CPC9909NE![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP RoHS : Compliant |
| 1,016 | ||
CPC9909N![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8; 2mA RoHS : Compliant |
| 685 | ||
| C99073-000 | TE Connectivity | PIN: 2 RoHS : Compliant |
| 1 | ||
CPC9909NTR![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8 RoHS : Compliant |
| 0 | ||
| CC990 | TESTEC Elektronik GmbH | Probe: for oscilloscope; current; 1.5MHz; 600V; 0.23us; BNC plug |
| 0 | ||
| EVC990 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
CPC9909NETR![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP RoHS : Compliant |
| 0 | ||
| LTST-C990TGKT | Lite-On Semiconductor Corporation | LED; green; SMD; 0603; 75°; 525nm; round; No.of diodes: 1 RoHS : Compliant |
| 0 | ||
| LTST-C990KRKT | Lite-On Semiconductor Corporation | LED; red; SMD; 0603; 180÷1120mcd; 75°; 25mA; Lens: transparent RoHS : Compliant |
| 0 | ||
| LTST-C990TBKT | Lite-On Semiconductor Corporation | LED; blue; SMD; 560÷1400mcd; 75°; 20mA; 525nm; Lens: transparent RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 10C9900973 | Brady Worldwide Inc | 0468-0113-0000,REV.00 |
| 1,250 | |
| EC9905-000 | TE Connectivity | ZHD-SCE-1K-19.0-50-S1-9 RoHS : Compliant | 0 | |||
| EC9903-000 | TE Connectivity | ZHD-SCE-1K-12.7-50-S1-9 RoHS : Compliant | 0 | |||
| EC9907-000 | TE Connectivity | ZHD-SCE-1K-25.4-50-S1-9 RoHS : Compliant | 0 | |||
![]() Powell Electronics | EC9901-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 1,320 | |
| EC9905-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 660 | ||
| C99073-000 | TE Connectivity | Data Bus Components RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 530KC990M000DGR | Skyworks Solutions Inc | Oscillator XO 990MHz ±20ppm CML 1.8V 6-Pin SMD T/R RoHS : Compliant |
| 0 | |
| 530KC990M000DG | Skyworks Solutions Inc | Oscillator XO 990MHz ±20ppm CML 1.8V 6-Pin SMD Coi RoHS : Compliant |
| 0 | ||
| GC9901-TSR | Microchip Technology Inc | Schottky-Surface Mount Limiting Diode Driver RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | MC990001A09 | INSTOCK | 1 | |||
![]() Avnet Abacus | C99073-000 | TE Connectivity | (Alt: C99073-000) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | 33-HC990EXF-35-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | |
| HC990EXF-35-05-0361 | Calian | Embedded, Full GNSS Spectrum + L-band with eXtended Filtering, 35dB active gain, MCX R/A Male/Plug, 361mm cable length |
| 0 | ||
| 33-HC990EXF-35-00-0150 | Calian | Internal p/n 110-0342-A |
| 0 | ||
| 33-HC990XF-28 | Calian | HC990XF Extended-Filter Full-Band GNSS Low-Profile Helical Antenna + L-Band, 28dB |
| 0 | ||
| 33-HC990EXF-35-05-0361 | Calian |
| 0 | |||
| 33-HC990EXF-28-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| 33-HC990EXF-35-00-0190 | Calian |
| 0 | |||
![]() Chip-Germany GmbH | C9900-K115 TYP BNC/BELDE | Beckhoff Automation GmbH | 2 | |||
| C9900-A323 PCI-BUS | Beckhoff Automation GmbH | 2 | ||||
| C9900-K435 128079 | Beckhoff Automation GmbH | 1 | ||||
| C9900-K535 129179 | Becmer | 1 | ||||
![]() FDH Electronics | SM-C-990000-1 | Delta Electronics Manufacturing Corp | Cable Assembly | 3 | ||
![]() Pasternack Enterprises US | PE3C9904-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-12 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | |
| PE3C9904-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9904-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9904-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 36 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 36 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-36 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9908/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to Trimmed Lead Cable Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. | 30 | |||
| PE3C9908/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to Trimmed Lead Cable 12 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-12 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-12 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 6 | ||
| PE3C9908/HS-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Female Bulkhead to Trimmed Lead Cable 6 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-6 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-6 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-6 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-6 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 6 | ||
| PE3C9906/HS | Pasternack Enterprises | 0 | ||||
| PE3C9900 | Pasternack Enterprises | 0 | ||||
| PE3C9909 | Pasternack Enterprises | 0 | ||||
| PE3C9906 | Pasternack Enterprises | 0 | ||||
| PE3C9908 | Pasternack Enterprises | 0 | ||||
| PE3C9905/HS | Pasternack Enterprises | 0 | ||||
| PE3C9903 | Pasternack Enterprises | 0 | ||||
| PE3C9905LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3C9905LF/HS is a TNC male right angle to TNC female bulkhead cable using LMR-195-UF coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C9905LF/HS TNC male right angle to TNC female bulkhead cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | HMC990LP4E | Analog Devices Inc | Down Converter RoHS : Compliant | 10,816 | ||
| GC9902-17SP | Microchip Technology Inc | Mixer Diode, Low Barrier, X Band, Silicon RoHS : Compliant | 2,180 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |